Tables for Datasources

<Moderator Message: Please search the forums>
Gurus,
From where can we find what all tables a DataSources is extracting the data from. We are working with BW 3.5. I know if we look at the InfoSource we can find out the mapping fields but how do we know which table it is coming from for eg. I want to know 0PROJECT_ATTR is getting the data from which table?
Thanks & Regards,
Venkat
Edited by: Siegfried Szameitat on Jun 8, 2009 3:45 PM

check this posts, it has the answer:
tables in datasource?
hope it helps,
rgs,
Parth.

Similar Messages

  • Base tables for datasource 1cl_obat001 ?

    hi all ,
    how to know the base tables for   datasource 1cl_obat001 ?
    Thanks

    HI ,
    Ok fine , its a classification datasource , its is generated one ,you can find the details in the table CLBW_SOURCES
    in your source system (ECC ) ,
    Provide the datasource name in the infosource field , and the field OBTAB shows the source table for the extractor
    Hope its clear,
    Regards,
    Sathya

  • Tables for DataSource

    Hi,
    How to find the Table names for the Text DataSources (e.g. 0CUSTOMER_TEXT)?
    Thanks

    Hi,
    goto RSO2, display the DataSource 0CUSTOMER_TEXT; you'll see that it is based upon a view BIW_KNA1T; double click on it, you see the view definition
    TXTMD = KNA1-NAME1
    For other datasources it is not so trivial...
    - you can display the fields of the datasource in RSO2 or RSA5 or 6. double click a field; you will then see the extract structure; double click the component of the field you are searching; perform a where-used list in tables for its data element...
    - when the DS is extracted via a FM you'll get a warning with the function module name; read the code of the FM...
    hope this helps,
    Olivier.

  • Table for creating  datasource .

    Hi Experts
    I am trying to create a report.
    The report output is as follows
    Companycode | business partner type | Business partner No | vendor no | customer no |cheque no | cheque date | cheque amount | check status | bank account no |.
    Now to create datasource for fetching the above data I am trying to find the tables . All the data related to cheque is present in the table PAYR but from where can I get business partner number and business partner type .
    Any clues ?

    Hi,
    If you are extracting data from CRM system then refer the below given tables for required information,
    - BUT000 : BP: General data - Contains Business Partner Number, Partner Category, Partner Type, First Name, Last Name et
    [http://wiki.sdn.sap.com/wiki/display/CRM/CRM+Tables]
    Regards,
    Durgesh.

  • R/3 table for a datasource?

    Hello,
    how to know the corresponding r/3 table for a business content datasource?
    (if i need to check the data for the same on the r/3 side)
    regards,
    Message was edited by: Abhijit Bhalerao

    Hi dear,
    welcome on board!
    Here are what do you need:
    0ec_pca_1 (from GLPCT)
    http://help.sap.com/saphelp_nw04/helpdata/en/de/46663758459166e10000009b38f8cf/content.htm
    0co_om_opa_6 (from COVP, COEP, COBK and AUFK)
    http://help.sap.com/saphelp_nw04/helpdata/en/86/b35a259a03fe42b29d1437a7fba1c6/content.htm
    Remember that help on line is always the best (first to check) source of info !
    Please don't forget to reward the answers (here it's THE way to say thanks...)
    Bye,
    Roberto

  • How to find R/3 table  for FI and PS Datasources

    Hi,
    Can anyone tell me that how can we find SAP tables for FI and PS datasources in BI. Please provide information as it is urgent. Points will be assigned
    Thanks
    Shanthi

    Hi,
    To find DS assigned to a table.
    How to find the Datasources for the given table names ?
    How to find the Datasources for the given table names ?
    To find Tables assigned to a DS.
    USe Extractor Checker RSA3. Execute ST05 (activating SQL Trace), switch on the trace and execute the extractor checker. Once the extractor checker presents the results
    switch off trace. The clcik on Display trace and you will see all the tables that were hit by the extractor checker to
    retrieve data and present it to you.
    Note: Set the break point in the Extractor Function module.
    View the ST05 Extended Trace list. The Object name shows the Tables accessed.
    Thanks,
    JituK

  • Know the tables for FI and COPA datasources

    Hi Experts,
    For FI and COPA datasources, How do i get to know..What are the table for that data source. any table or tcode to know the tables.
    Thanks.

    Hi,
    Their is no standard tcode is available for tales based on the Datasource but we can get the tables based on the DS in help.sap.com like...below table origin in the link...
    http://help.sap.com/saphelp_bic704sp06/helpdata/en/a8/f4153c4eb5d82ce10000000a114084/frameset.htm
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/a7f2f294-0501-0010-11bb-80e0d67c3e4a?QuickLink=index&overridelayout=true
    FI Tables/Datasources on R3/ECC. What is the link?
    Regards,
    Satya

  • Need to know the base tables for the QM datasources

    Hello SAP Experts,
    I want to know the base tables for the below mentioned datasources which stores the transaction data.
    1. 2LIS_05_QE1:  Inspection Characterstics Results
    2. 2LIS_05_QE2: Inspection Characterstics Results (Quan)
    3. 2LIS_05_QVUDN: Usage decision for Inspection
    Need your inputs.
    Thanks,
    Lasya.
    Edited by: lasya john on Dec 10, 2008 8:28 PM

    Hi Lasya,
    You can use help.sap.com for this.
    If you do not find this data source there...then
    You can go to LBWE t-code in R/3 and then infront of the data source...you have maintenance option.
    Click on that ...and go inside it in the display mode.
    Here you can see a generic pool of fields on the left side which can be included in the data source........  field present in the data sources in the right side of the pool.
    For every field you have a tructure name infront of it like MCXXXX where XXXX is the table name.
    So the field is being from that particular table.
    Even I would the same thing to reply to your thread.
    You can follow the same procedure to find the table for any LO data source.
    This is accurate in 99% cases...only in very few cases like purchasing...we get one or two fields from different tables.
    Hope it helps.
    Thanks
    Ajeet

  • How to get Tables for the datasource

    Hi ,
    When i have a datasource,How do i get to know..What are the table for that data source.
    Thanks,
    Kiran.

    Hi,
    In ECC:
    1. goto RSO2 and give datasource name and display, if it is SAP defined datasource it will display some warning message in Status bar, so again press Enter Button and then see teh datasource there you can fine FM, Table/VIiew, InfoSet like that, in this way you can fine, if it is build on Function Module then you need to see that FM and debug and find. For LO dataSources you can fine in LBWE.
    https://wiki.sdn.sap.com/wiki/display/BI/BWSDMMFIDATASOURCES
    Thanks
    Reddy

  • Tables for Generic datasource

    Hi experts,
    I want to create a generic data source related to purchasing for these fields.Anyone please provide me exact tables of these fields
    1.MWSKZ     Tax code
    2.KBETR     Condition amount
    3.KWERT     Condition Value
    4.SORT1     Search Term
    5.SORT2     Search Term
    6.VALVT     Value date (Check date)
    7.QBSHB     Withholding tax amount in doc cur
    8.DWERT     Differnce value     
    9.FRBNR     No. of Bill of lading at time of GR
    10.GROES     Size / dimension
    11.WT_QSSHB Withholding tax amount in doc.currency
    12.WT_WITHCD Witholding tax code
    13.Condition Type.
    Atleast if anone give tables for some fields is also helpful.
    Regards,
    Nishuv.

    Hi
    Table-Field
    EKPO-MWSKZ
    KOMV-KBETR
    KOMV-KWERT
    BSEG-QBSHB
    MKPF-FRBNR
    WITH_ITEM or BSEG-WT_QSSHB
    LFBW- WT_WITHCD
    MARA-GROES
    Condition Type : KONP
    Also check the following Link :
    http://help.sap.com/saphelp_nw70/helpdata/en/45/4f8e8bbf3f4f63a5dd197ef7d53fa2/content.htm
    http://www.abap.es/Descargas/TAB%20-%20Relacion%20de%20las%20tablas%20por%20modulos.PDF
    Im unable to find VALVT and DWERT... kindly check the name once....
    Hope thia helps you...
    Regards,
    Debjani....
    Edited by: Debjani  Mukherjee on Sep 7, 2008 7:07 AM
    Edited by: Debjani  Mukherjee on Sep 7, 2008 7:25 AM
    Edited by: Debjani  Mukherjee on Sep 7, 2008 12:20 PM

  • How to know the tables for a datasource like 2lis_17_order

    Hi,
    How to know the tables for a data source like 2lis_17_order, i have checked in Extract structure of that data source, only fields are visible but how will i know that these fields are getting extracted from so and so tables?
    pls respond. thanks in advance

    Hi,
    Go to RSO2 at source system, Enter data source and click on display.
    if its table based then you can see table name there it self.
    if its view based then notedown the view name and go to  SE11, provide view and click on display. see joined table names there.
    Thanks

  • How to get standard view or table for the standard inforsource

    Hi all:
          According to business reqirement, we are going to use standard inforsource 0CO_OM_CCA_10,
    we need to know the standard view or table in order to corresponding DataSource?
    could you please tell me how to get  the standard view or table or DataSource?
    Couldn't thank you more!

    Hi Sony,
    Goto RSA1>BI content installation>goto objects>double click on the Infosource>then a pop-up comes search for that infosource-->select it and click on transfer
    Before that in the right side of the tab select the grouping as "Before and afterwards of the dataflow" and collection as automatic.
    then you get all the datasource/cubes and all the object related to the infosource.
    OR another option is-->
    Goto RSA6 in the R/3 and search for the datasource with the name "0CO_OM_CCA_10" (don't forget to expand all the tree structure in RSA6)
    then goto that datasource and double click on the datasource then you will get the Extract structure of that datasource.
    double click on the extract structure then you may get the View name also.
    hope this helps...
    Regards,
    Ravi Kanth

  • How to extract data into the set-up table for 2LIS_06_INV LIS structure

    We are using ECC 6.0 and SAP BI NW 2004S. I activated the 2LIS_06_INV  (Invoice Verification) structure. Interestingly, I don't see any Events under this structure  (MC06M_0ITM) - my understanding is the events usually determine what type of data is generated for a given structure.
    I see Invoice Verification when I use the Inventory Management -Perform Setup  option when doing the set-up tables. However, when I use this option, I get a message saying " No extraction structure active or no BW connected".
    Can someone list the pre-requisites and the steps to load the set-up table for the 2LIS_06_INV structure.
    Thanks,
    Sanjay

    1: RSA5 Activate Data Source
    2: LBWE Activate datasource again
    3: SBIW Fill setup table 'Settings for Application-Specific DataSources (PI)'-> 'Initialization'->'Filling in the Setup Table'->'Application-Specific Setup of Statistical Data'->'Invoice Verification - Execute Reconstruction'

  • Error while filling setup table for 2LIS_03_BF

    Hello,
    I am getting an error while filling set-up table for 2LIS_03_BF.
    Following is the screenshot of the same.
    If I check in ST22, I get following,
    I could fill the setup table for other datasource 2LIS_03_BX without any problem.
    Please suggest.

    Hi,
    Can you try filling the setup table data for that range in background?
    Sometimes because of huge data that you are trying to fill it might through you a dump. So please execute it in background and see if it works?.
    But still can't really say what that dump tells from what you attached.
    Thanks,
    Sathya

  • Problem while filling the Setup Table for the DS 2LIS_02_SCL.

    Hi All,
    When I am trying to fill the Setup table for the DataSource 2LIS_02_SCL and only for one specific Purchase Order, it is showing me a message like
    u201CDataSource 2LIS_02_ITM contains data still to be transferredu201D
    I have deleted the Setup Table and I want to delete the entries from SM13, but I do not have Authorization.
    Also, here I am trying to fill the Setup Table for 2LIS_02_SCL and not for 2LIS_02_ITM, but the message displayed above is showing as 2LIS_02_ITM DataSource. I think the Setup Table will be same for both the DataSources.
    Waiting for your valuable inputs.
    Thanks in Advance.

    Hi,
    When you want to fill the setup tables first you need to delete setup tables to avoid the duplicate entires in setup tables ( you can delete the setup tables by using t.code LBWG with application no is 02)
    In your case, the data souce is 2LIS_02_SCL for purchasing.
    when you want to delete the setup tables by using t.code LBWG with 02 application no it will delete all the purchasing related data from all the data sources like
    2LIS_02_SCL
    2LIS_02_ITM
    Before the deletion of setup tables you need to clear the delta Queues and stop the V3 jobs, which loads the data to Delta Queues (RSA7) and Update tables(LBWQ).
    you need to run the V3  jobs manually by using LBWE > Job control > and schedule the jobs until the delta queues will get 0 records. that means no data will be available in RSA7 and LBWQ
    go to SM37 to see the jobs LIS-BW-VB_APPLICATION_02,
    once the delta queues gets 0 records by running V3 Jobs manullay.
    Then remove the released state jobs > remove from schedule means delete the jobs in LBWE > Go to job control > you can delete the released jobs.
    Becuase No postings to be done in application tables, while running setuptable filling you should take some down time to fill the setup tables.( OLI*BW)  *=Application number.
    Once you clear the Queues and delete the v3 jobs, then you need to fill the setup tables after deletion of setup tables.
    once you fill the setup tables , by running intialization to BW side the delta Queue is formed for the data source in R3 side
    Now the postings can be done in R3 side, so you need schedule back the V3 jobs, which you already delted from LBWE to load the data from application tables to RSA7 or LBWQ.
    I hope this may help yoou.
    Regards.
    Rambabu
    Edited by: Rambabu velanati on Jun 9, 2010 4:41 PM
    Edited by: Rambabu velanati on Jun 9, 2010 4:52 PM

Maybe you are looking for