Tables for g/l account, cost element and cost grouping

Hi Experts,
I am finding for a table which has g/l account against cost element.
Finally, I need to find their relevant cost grouping so that I know which g/l account is relevant to the cost group.
Which table can I find for these information?
Please help!

Hi
The Link between GL & Cost element is not required because GL Account No = Cost element No
Cost Ele is stored in CSKA & CSKB Tables.. Cost ele groups are stored in Table SETLEAF
br, Ajay M

Similar Messages

Table for link between Accounting document and Billing document

Which is the table for link between Accounting document and Billing document ?
Thanks & Regards

Ø Go to SE16N, enter table BSAD
Ø In the Reference Field (VBELN) enter the Billing Document no.
Tips:
Ø Make sure that only those billing documents will be considered whose accounting documents actually exists
Ø No Accounting documents will be displayed for Credits, Free of charge orders and those acc. Documents which have been cancelled.

Report / Table for getting Datewise item cost

Friends,
Can u help me know MM Report / Table for getting Datewise item cost in a plant.

hi,
try table S031...Movement of stocks....
THis shd help you..
Regards
Priyanka.P

Need API for EAM Active Association - Asset number and Asset Group

Hi
I am working in R12 and need api for EAM Active Association - Asset number and Asset Group to insert the new records.
If any one is aware please let me know API with sample script.
Regards
Suresh P

All APIs are listed in Oracle Integration Repository
http://irep.oracle.com/index.html
API User Notes - HTML Format [ID 236937.1]
R12.0.[3-4] : Oracle Install Base Api / Open Interface Setup Test [ID 427566.1]
Oracle Trading Community Architecture API User Notes, June 2003 [ID 241320.1]
Technical Uses of Customer Interface and TCA-API [ID 269121.1]
Pelase also check below:
Api's in EBS
Re: Api's in EBS
http://sairamgoudmalla.blogspot.com/2009/05/script-to-find-oracle-apis-for-any.html
API
Fixed Asset API
List of API
Re: List of APIs
Oracle Common Application Components API Reference Guide
download.oracle.com/docs/cd/B25284_01/current/acrobat/jta115api.pdf
List of APIs and open interface R12
Re: List of APIs and open interface R12
Regard
Helios

Table for G/L Account

Hi all,
I need to find the opening and closing balance amount for each day of a month based on gl account.
Please suggest me a table that has gl account ,date and closing balance of a particular day.
Regards,
Vidhya

Hi Friend ,
Please use this below bapis and write a small program with selection screen G/L Acction, period, date ,etc based on your input it will display the G/L balance. before writing you can execute the BAPi with one G/L accout of a date to see the Balance on that.
BAPI_GL_ACC_GETBALANCE
BAPI_GL_ACC_GETCURRENTBALANCE
BAPI_GL_ACC_GETPERIODBALANCES
Regards ,

I registered the wrong information for my iCloud account--I misspelled and now want to change it. Help is needed to delete the account and start anew.

I registered the the wrong information for my iCloud account--I misspelled the account name. I accidentally spelled blackberry instead of blackbird. How can I change this?

If you don't want to use an alias you'll have to create a new account as you cannot change the @icloud.com address once created. You'll have to create a new ID, verify the ID, then use the ID to create the new account, and migrate your iCloud data to the new account.
If you are currently syncing data with iCloud, begin by saving any photo stream photos to your camera roll as mentioned above. If you are syncing Notes with iCloud, you'll also need to open each of them and email them to yourself so they can be recreated in the new account. Finally, if you are syncing any iWork documents with iCloud, turn off iCloud syncing in your iWork app settings.
Then go to Settings>iCloud, tap Delete Account, and choose Keep on My iPhone when prompted. Then in Settings>iCloud tap Get a Free Apple ID at the bottom, set up your new ID, verify the email address you use to create it by responding to Apple's verification email, then sign in with the new ID to create your new account. Turn on your iCloud sync settings and choose Merge when prompted to upload your data to the new account. When you turn Mail to On you will be prompted to create your new @icloud.com email address. Be carefull to type it correctly as it cannot later be changed.

Tables for G/L account

Hi All,
can u pls specify me the tables for
1)G/L openings
2)S/L account
3)S/L openings
Thanks&Regards,
Anji

Hi Anjii,
     GL accounts Cleared : BSAS
                           Opened : BSIS
     Header : all details : BKPF
       Item                      : BSEG
Tr code FBL3n.
Regards,
Sureshkumar.AL

Table for G/L account balances

Hi ,
Can any one tell me the table through which i can see G/L account balances total period wise.

Hi,
You will check the BSEG table for G/L Balances Normally we are using BKPF,BSIS.BSID,BSIK for Balances of relavent submodule.
REgards,
SAtya

Mapping table for contact person download from ECC and Groupware

There are 3 connected system in our landscape:
- CRM
- Groupware (connected to CRM)
- ECC
We have a requirement that the Contact Person can be created in any of the above 3 system and should flow to the other. So, the below scenarios are valid in our case:
1. Contact created in Groupware, flows to CRM ->ECC
2. Contact created in ECC flows to CRM-> Groupware
3. Contact created in CRM flows to Groupware and ECC
Our flow system works fine and the contacts created in one system, flows to the other 3 and any changes also flow.
The problem is that for the contacts created in ECC, the communication data (phone, email etc) flow in CRM and get updated in the "Work Address" section in the Contact display screen in Web UI and the updates from Groupware for communication data gets updated in "Main Address" section.
Can anyone please advise what are the mapping tables for the address update when the contact is created in :
- Groupware/CRM
- ECC
Regards

Hi Christophe,
Thanks for the response.
I checked for the notes you suggested, but having read it it doesnt appear to address my problem. Did you get this from SAP as fix to solve' specify the name of contact person' error in SMW01 ? Unfortunately even SAP isnt replying to me on this.
I am also not getting any dump, all my queues are getting cleared in ECC and CRM. My error remains 'specify the name of contact person'. Interestingly when i tried to push the contact person directly as bupa_main..it too failed with the same error..more interestingly whenver my contact person tried to get replicated as bupa_rel..ecc does eat up a number assignment..but no record is created for it in ecc...the smw01 says partiaslly send ..receivers has error..
Edited by: Hamed Kazi on Apr 19, 2011 2:33 AM

Trying to use Variables with the Unknown Computer collection to prompt Task Sequence for Domain, Join Account, Join Password, and Join Location.

I want to use SCCM 2012 R2 and OSD, to boot a bare metal machine, install and OS, and bind it to Active Directory. The catch is that I want the deployment process in SCCM to prompt for the following pieces of information, and then use that information to
bind the computer to Active Directory (W/O using MDT) instead of supply the data in the task sequence.
Computer Name
Domain
Domain OU
Domain Join Account
I am approaching this in a similar fashion as stated in this blog.
http://osdblog.com/2013/06/26/add-a-prompt-for-a-computer-name-in-your-sccm-deployment/
I have added the following collection variables to the unknown computers collection:
When I launch the task sequence, I am prompted as I would expect. I input the desired information, the deployment competes, but it does not bind to the domain. Here is what my TS looks like. I intentally disabbled the apply Network Settings step
because it forces you to enter specific information if it enabled. I don't want to that, thus why I am trying to use the variables.
My SMSTS log does not have a whole lot of meaningfull data, but I can post it if someone wants to see it. The only possible thing I could think of would be drivers, their are some driver errors in the log. However, if I turn on the Apply Networking setting
process in the task sequence and turn off the variables, the machines bind fine. With that in mind, I would not think my problem would be driver related. Anyone out there have expertise in using a process like this, that could assist?
--Tony

Awesome! Thanks. One more thing, how should I supply the OSDJoinPassword variable? Should I just enter %OSDJoinPassword%
for Password and Confirm Password? I can not tell if it will actually read it as a variable or try to use "%OSDJoinPassword%" for
the actual password.
--Tony

Table for IR GL-Account in PO

Dear All
From which table I can get GL Accounts attached on IR (invoice) at PO History tab.
I have to pick IR of only particular G/L Accounts. I am giving GL Account in EKBE from where I am getting POs for that particular G/L Account but on line item few PO are also attached which some other G/L accounts. So from which table I can get G/L Account attached on invoices at PO line item (History Tab) level.

Hi,
Your question is not clear. I could provide tables for Incoming Invoice, RBKP (Header), RSEG (Item).
Regards
Mohammad Shaik.

How do I position my layer/table for my header in the center and up top?

I have designed a site before on my dreamweaver 4 site and
decided to design a new one. I just tried to insert my header into
the website and it worked fine. However, how to I align it directly
in the center and all the way to the top so their is no space from
the top of my site and header? My header is about 960 pixels wide
and was hoping to have it centered when viewed with a few inches of
background on each side. My last sight it just worked out when I
did but not this time.
Just so you know, I set a header layer down first, then put
in a single row and column table, then inserted my Gif header.
Header looks great but placement is wrong. Thanks

Good grief - DW3? It's not there. You will have to do it in
code view.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"dontsettle22" <[email protected]> wrote in
message
news:fm1p83$pql$[email protected]..
> Darn it, this is what I was looking for, however, I am
on dreamweaver 3.
> I can't find an insert ....layout....div. Any other
ideas where I find
> div?

Table for inventary gl account in mm

hai experts,
iam develop one report based on purchase order migo and miro complted.
but i want accounting corresponding all gl accounts and amounts including inventary gl account.
on which tables available . except bseg table.
thanks in advance.

Your question is much too vague. Please read about [Asking Good Questions in the Forums to get Good Answers|/people/rob.burbank/blog/2010/05/12/asking-good-questions-in-the-forums-to-get-good-answers] before posting again.
Thread locked.
Thomas

Designing a table for high rate of concurrent inserts and selects...

I am looking for some recommendations on designing a table the will be inserted into from both nodes of a 2 node cluster quite heavily during peak hours when we are taking alot of orders. We are an online store and we are designing a table that will be used to hold product sku's for items that are placed in a shoppers cart at the same time and then we plan to use this table as a way of subtracting the inventory in this table as a minus in a view of our true nventory quantities?
Not sure if that was clear but basically this table will be getting hit heavily for inserts and at the same time we will be using the data in the table to select from it so we can subtract the shu's that exists in the table.
I am looking for techniques that maybe some of our guru's have implemented in this type of design in a rac environment that will help in the conncurrency that we are expectiing.
Should I be building my tables with the smallest block size available as to avoid hot block in the db buffer cache and also we are using a sequence to generate and ID on the table and I have set a large cache size on the sequence (5000).
We are planning on using ASSM table spaces with auto extent and segment space management as everthing we have read indicated that this is the best type of tablespace mgmt in RAC.
What other factors should I be considering.
any help or suggestions are greatly appreciated.
Thanks in advance.

user520056 wrote:
I am looking for some recommendations on designing a table the will be inserted into from both nodes of a 2 node cluster quite heavily during peak hours when we are taking alot of orders. We are an online store and we are designing a table that will be used to hold product sku's for items that are placed in a shoppers cart at the same time and then we plan to use this table as a way of subtracting the inventory in this table as a minus in a view of our true nventory quantities?
Not sure if that was clear but basically this table will be getting hit heavily for inserts and at the same time we will be using the data in the table to select from it so we can subtract the shu's that exists in the table.
I am looking for techniques that maybe some of our guru's have implemented in this type of design in a rac environment that will help in the conncurrency that we are expectiing.
Should I be building my tables with the smallest block size available as to avoid hot block in the db buffer cache and also we are using a sequence to generate and ID on the table and I have set a large cache size on the sequence (5000).
We are planning on using ASSM table spaces with auto extent and segment space management as everthing we have read indicated that this is the best type of tablespace mgmt in RAC.
What other factors should I be considering.
any help or suggestions are greatly appreciated.
Thanks in advance.See my .sig for other questions you should answer - OS, DB (version &c.),
CPU/RAM/Disk...
If you're running this on a 386 with 16 MB of RAM with on HDD, then you could
have problems - if you're running it on something different, well that changes
the possible answers.
Paul...
When asking database related questions, please give other posters
some clues, like OS (with version), version of Oracle being used and DDL.
Other trivia such as CPU + Disk configuration might also be useful.
The exact text and/or number of error messages is useful (!= "it didn't work!"). Thanks.
Furthermore, as a courtesy to those who spend time analysing and attempting to help,
please do not top post and do try to trim your replies!

IOS Signature Settings for Multiple Email Accounts causes crashes and errors

Hello Everyone,
I've been having troubles with iOS email signature for severals years from iOS 4 (?) through iOS 7 on everything ranging from an iPad2, iPad3, IPad Air, and various iPhones. I'm currently on an iPad Air 128GB WiFi running iOS 7.1.2.
I have about 12 email accounts. I have it set to a unique signature per account. Whenever I try to scroll the list of signatures in the settings app, it will often have greyed out areas where a signature is supposed to be (especially after adding a new account). Other accounts will blur together and overlap each other. Very often the whole settings app crashes. Once the crashes start, they happen more frequently and you basically have to Power Off and Restart the iPad to get it back to a somewhat stable state.
I've come to accept that the Mail Signatures is broken and not stable. But maybe I'm just doing it wrong. So, I ask you great and wonderful Apple Community: Any suggestions? Or just keep on like I've been doing for the last several years?
Thank you!
Paul Holje

this crash has been present since ios6 (apparently). it's apparently caused by a buffer overflow (i've not yet examined the crash files i've been generating) because the engineers never tested use cases such as yours or mine.
a painful workaround is to disable all your email accounts but one, edit its signature, then disable it, and enable the next one, and so on. ios saves the correct signature for each account and the settings app crash does not occur.
hope this helps

Tables for g/l account, cost element and cost grouping

Similar Messages

Maybe you are looking for