Tables for Issuing Material to Production & Return from the Productin
Dear All,
I had a issue, to develop a report for WIP;
Here we are issuing the Material to Production nothing Net Work Ordeer, and received goods from the Net work Order. Here Client wants only the difference between the Issue to the Production & Received from the Production. Which tables Can i go for this report. Can any body had any idea.
Regards
Raj
Dear Raj,
Check in MB51 for the 261/262 movement order wise.tables MSEG,RESB,MKPF can help you.
Or else check in the table RESB,for the reservation no,here you can find the reserved quantity,the quantity issued etc along
with the cost.
Or else you can check in COOIS.
Regards
Mangalraj.S
Similar Messages
-
My iphone 4S has problem in making and receiving the calls. While making the call , call fails and netwrok disappears. Like wise no voice is heard for incoming calls. This happened after return from the overseas travel.
Hello SamSax
Check out the assist page below for troubleshooting call connectivity.
Calls and connection issues
http://www.apple.com/support/iphone/assistant/calls/
Thanks for using Apple Support Communities.
Regards,
-Norm G. -
Revision number for Header material in Production order.
I have maintained Revision number in material mster for Header material in Production order and also for components.
1)Revision number for Header material in Production order is not appearing in AFKO table against production order.
2)Revision number for components in Production order is not appearing in RESB table against reservation.
Any settings for that please guide.Hi,
Revision number generation is using ECM only possible. Are you using the ECM with revision levels. Check this.
Regards,
V. Suresh -
Publishing issue: return code 120 was returned from the server.
Hi
I'm working on an issue when attempting to publish a crystal report using the sap toolbar. When I try to publish I am seeing the following error
An error occurred while saving and/or publishing. The return code 120 was returned from the server.
Does anyone know what this return code means or where I can look it up?
Thanks
DanielHi Alexander,
Looks like you are encountering the same issue as us. The issue seems to be just being able to save the report to bw.
We are on sp2 fix pack 2.3 but experienced this behavior on sp2 as well
We tried a few tests against the server with sp2 installed
Client machine 1 # older version (just base install)
Configuration
Bobj client 12.1.0.882
crystal reports 2008 sp 1 12.1.0.892
sap ik 12.1.0.890
Behavior
-open a report in bw and preview in crystal - ok
-open a report preview and save report in bw using same name - ok
-create a folder under sap bw role using save as dialog box that comes up when selecting save as on the sap toolbar - ok
-open a report preview and save report under different name - ok
- create a new report and save ok
Client machine 2 # same version as server with sp2 installed
Configuration 2 bobj 3.1 sp2 fix pack 2.3
Bobj client 12.2.3.467
crystal reports 2008 sp 1 12.2.3.467
sap ik 12.2.3.467
Behavior
-open a report in bw and preview in crystal - ok
-open a report preview and save report in bw using same name - ok
-create a folder under sap bw role using save as dialog box that comes up when selecting save as on the sap toolbar - ok
-open a report preview and save report under different name I get the 120 error
- create a new report and save I get the 120 error
We ran rfc traces, authorization traces and found nothing.
Our support ticket is with the SAP BW team now and we are waiting to work with them. I will update the thread as we find more information.
Thanks,
Daniel -
Can I know what is the process for us to do Good Return from customer?
Can I know what is the process for us to do Good Return from customer?
hi
this ques need to be posted in sd forum..
to answer this u can use order type RE to create Return order and then u can do the goods receipt..
or u can use the process mentioned in first reply.
regards
CMM -
When I run the report on production I got the following error message:
Sys.WebForms.PageRequestManagerServerErrorException: An unknown error occurred while processing the
request on the server. The status code returned from the server was: 12019
It hasn’t happen on Dev and Test before.
I googled, The error is described as:
12019 ERROR_INTERNET_INCORRECT_HANDLE_STATE
The requested operation cannot be carried out because the
handle supplied is not in the correct state.
But I cannot find the solution for that.
Has it happend to you before? How to solve that?Same behaviour here, Sharepoint 2013 with SSRS in integrated mode
Error: Sys.WebForms.PageRequestManagerServerErrorException: An unknown error occurred while processing the request on the server. The status
code returned from the server was: 12019 -
sys.webforms.page request manager server error exception:An unknown error occured while processing the request on server. The status code returned from the server was:0 We got this response(In firebug console) when we try to click on link (after leave webpage for 3 minuts ideal) which is AJAX based. Please reply ASAP because its urgent.
Hi SP,
Please check if the following web config appSettins value settings from SSRS server could fix the issue (Note, back up your original web config file before any modification).
http://stackoverflow.com/questions/10911610/ssrs-webpage-error-status-code-500
http://srinivasbn.blogspot.in/2013/09/syswebformspagerequestmanagerservererro.html
http://connect.microsoft.com/SQLServer/feedback/details/782155/ssrs-2012-failed-with-win32-error-0x03e3
If you have more questions about the SSRS error logs related to this issue, you can post in the SSRS forum for a better assistance with more experts.
http://social.msdn.microsoft.com/Forums/sqlserver/en-US/home?forum=sqlreportingservices
Thanks
We are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
Tcode to know the status of returnable material that is returned to the cus
Hi everyone,
My question: Suppose, I have transferred a returnable material to the customer through a movement type 452. Now I want to check if the material has gone to the customer. Though with Tcode MMBE gives us an overview of the stock situation of the returnable material, it does not clarify whether the material is in the hands of the customer.
Is there any Tcode by which we can see the material that is returned to the customer?
ThanksLike..SQL> select s.owner s_owner,s.synonym_name,o.object_type,o.object_name,o.owner
2 from dba_synonyms s,dba_objects o
3 where s.table_name = o.object_name
4 and s.table_owner = o.owner
5 and synonym_name='COUNTRIES';
S_OWNER SYNONYM_NAME OBJECT_TYP OBJECT_NAME OWNER
OE COUNTRIES TABLE COUNTRIES HR
BI COUNTRIES TABLE COUNTRIES SHEdited by: jeneesh on Sep 22, 2012 3:11 PM
Forgot to refresh.. -
Hi,
I renewed my Offline Root CA and now trying to publish the CRL to AD on my Sub Issuing CA with the Certutil -dspublish command, however I get a 'Certutil: A referral was returned from the server' error. Kinda makes sense cause the Offline Root CA is
not on the network, so then how do I publish my renewed CRL to AD given this?
Thanks for your help! SdeDotLooks like your CRL do not include Active Directory container specification and certutil don't know where to publish the CRL.
Does root CA define LDAP url in CDP extension? If not, then you don't need to publish CRL in Active Directory, because no one will use it.
Vadims Podāns, aka PowerShell CryptoGuy
My weblog: en-us.sysadmins.lv
PowerShell PKI Module: pspki.codeplex.com
PowerShell Cmdlet Help Editor pscmdlethelpeditor.codeplex.com
Check out new: SSL Certificate Verifier
Check out new:
PowerShell File Checksum Integrity Verifier tool. -
Cisco Agent Error - 'A referral was returned from the server.'
Running agent 8.0.2.9 on Windows 7.
I have one person that is having trouble launching the agent software.
They are getting a popup that says, 'A referral was returned from the server.'
As of yesterday they were having no issues.
So fare we have tried the following.
Rebooted computer.
Uninstalled / reintalled agent.
Nothing has worked so far.Hi all,
I have Adam's case (afarabaugh) and the workaround is working. But it is interesting to note that this started on the same day for more than one customer. There are two things which come to mind:
--Certificate expired (ruled out for Adam's case)
--Microsoft released an OS update on that day?
@ke-mccormick: can you try setting the system clock on the PC to the day before the issue started? Let me know how that goes.
Any more information you can think of would help in isolating the issue.
Cheers,
Abhiram Kramadhati -
I am currently testing our website with CF11. It is currently working with CF8 however after migrating it to a new server running CF11 I have encountered the following error.
The value returned from the load function is not of type numeric.
The error occurred in
D:/Applications/CFusion/CustomTags/nec/com/objects/address.cfc: line 263
Called from D:/Applications/CFusion/CustomTags/nec/com/objects/contact.cfc: line 331
Called from D:/Applications/CFusion/CustomTags/nec/com/objects/user.cfc: line 510
Called from D:/Applications/CFusion/CustomTags/nec/com/objects/user.cfc: line 1675
Called from D:/website/NECPhase2/action.validate.cfm: line 54
261 : <cfif isNumeric(get.idCountry)>
262 : <cfset rc = this.objCountry.setID(get.idCountry)>
263 : <cfset rc = this.objCountry.load()>
264 : </cfif>
265 : <cfset this.sPostcode = get.sPostcode>
Have there been any changes between CF8 and CF11 that could cause this error?
Does anyone have ideas?This is the code in file object file country.cfc (nec.com.objects.country):
<cfcomponent displayname="Country object" hint="This is a Country object, it allows you to access and set values in the Country.">
<!---
// Construct this object
--->
<cfset this.objFunctions = CreateObject( 'component', 'nec.com.system.functions' )>
<cfscript>
this.idCountryID = 0;
this.sCountryName = "";
this.sISOCode = "";
this.sDHLCode = "";
this.iErrorID = "";
</cfscript>
<!---
// The following functions are the setters and getters. offering us a better way to get
// at the contents of the object
--->
<!---
// Getters
--->
<cffunction name="getID" displayname="Get ID" returntype="numeric" output="false" hint="This returns the ID of the current item.">
<cfreturn this.idCountryID>
</cffunction>
<cffunction name="getsCountryName" displayname="Get sCountryName" returntype="string" output="false" hint="This gets the sCountryName value of this item.">
<cfreturn this.sCountryName>
</cffunction>
<cffunction name="getsISOCode" displayname="Get sISOCode" returntype="string" output="false" hint="This gets the sISOCode value of this item.">
<cfreturn this.sISOCode>
</cffunction>
<cffunction name="getsDHLCode" displayname="Get sDHLCode" returntype="string" output="false" hint="This gets the sDHLCode value of this item.">
<cfreturn this.sDHLCode>
</cffunction>
<cffunction name="iError" displayname="Get iError" returntype="numeric" output="false" hint="This returns the iError of the current item.">
<cfreturn this.iError>
</cffunction>
<!---
// Setters
--->
<cffunction name="setID" displayname="Set ID" returntype="boolean" output="false" hint="This sets the ID value of this item.">
<cfargument name="idCountryID" required="true" type="numeric" displayname="ID" hint="The ID to use.">
<cfset this.idCountryID = arguments.idCountryID>
<cfreturn true>
</cffunction>
<cffunction name="setsCountryName" displayname="Set sCountryName" returntype="boolean" output="false" hint="This sets the sCountryName value of this item.">
<cfargument name="sCountryName" required="true" type="string" displayname="sCountryName" hint="The sCountryName to use.">
<cfset this.sCountryName = arguments.sCountryName>
<cfreturn true>
</cffunction>
<cffunction name="setsISOCode" displayname="Set sISOCode" returntype="boolean" output="false" hint="This sets the sISOCode value of this item.">
<cfargument name="sISOCode" required="true" type="string" displayname="sISOCode" hint="The sISOCode to use.">
<cfset this.sISOCode = arguments.sISOCode>
<cfreturn true>
</cffunction>
<cffunction name="setsDHLCode" displayname="Set sDHLCode" returntype="boolean" output="false" hint="This sets the sDHLCode value of this item.">
<cfargument name="sDHLCode" required="true" type="string" displayname="sDHLCode" hint="The sDHLCode to use.">
<cfset this.sDHLCode = arguments.sDHLCode>
<cfreturn true>
</cffunction>
<!---
// Clear, to empty out the contents of this object
--->
<cffunction name="clear" displayname="Clear items Details" returntype="boolean" output="false" hint="Clears out all of the items details.">
<cfscript>
this.sCountryName = "";
this.sISOCode = "";
this.sDHLCode = "";
this.iErrorID = "";
</cfscript>
<cfreturn true>
</cffunction>
<!---
// The following functions deal with the load, save and deleting of objects
--->
<!---
// Load
--->
<cffunction name="load" displayname="Load items details" returntype="numeric" output="false" hint="This loads in all the information about an item.">
<cfset rc = this.clear()>
<!---
// First of all we need to get the name of the data source we are going to be using
--->
<cfscript>
objDS = CreateObject("component","nec.com.system.settings");
sDatasource = objDS.getDatasource();
</cfscript>
<!---
// Check to see if it exists
--->
<cftry>
<cfquery name="checkID" datasource="#sDatasource#">
SELECT idCountryID
FROM tblCountry
WHERE idCountryID = #this.idCountryID#
</cfquery>
<cfcatch>
<cfscript>
objError = CreateObject("component","nec.com.system.errors");
iErrorID = objError.addError("load: checkID: '#this.idCountryID#' #cfcatch.detail#");
</cfscript>
<cfset this.iErrorID = iErrorID>
<cfreturn iErrorID>
</cfcatch>
</cftry>
<cfif not checkID.recordCount>
<cfscript>
objError = CreateObject("component","nec.com.system.errors");
if(isDefined("session.afr")){
whichOne = "#session.afr.getsAFRNumber()#";
} else {
whichOne = "";
iErrorID = objError.addError("A Country with that id doesn't exists.[#this.idCountryID#][#whichOne#]");
</cfscript>
<cfset this.iErrorID = iErrorID>
<cfreturn iErrorID>
</cfif>
<!---
// If we got past all then then load in the details
--->
<cftry>
<cfquery name="get" datasource="#sDatasource#">
SELECT idCountryID, RTRIM(sCountryName) as sCountryName, RTRIM(sISOCode) as sISOCode, RTRIM(sDHLCode) as sDHLCode
FROM tblCountry
WHERE idCountryID = #this.idCountryID#
</cfquery>
<cfcatch>
<cfscript>
objError = CreateObject("component","nec.com.system.errors");
iErrorID = objError.addError("load: get: #cfcatch.detail#");
</cfscript>
<cfset this.iErrorID = iErrorID>
<cfreturn iErrorID>
</cfcatch>
</cftry>
<cfset this.idCountryID = get.idCountryID>
<cfset this.sCountryName = get.sCountryName>
<cfset this.sISOCode = get.sISOCode>
<cfset this.sDHLCode = get.sDHLCode>
<cfset this.iErrorID = "">
<cfreturn true>
</cffunction>
<!---
// Save
--->
<cffunction name="save" displayname="Save items Details" returntype="numeric" output="false" hint="Saves (to some source) the current details for the ID of the item.">
<!---
// First of all we need to get the name of the data source we are going to be using
--->
<cfscript>
objDS = CreateObject("component","nec.com.system.settings");
sDatasource = objDS.getDatasource();
</cfscript>
<!---
// Now check to see if ithat ID exists
--->
<cftry>
<cfquery name="checkID" datasource="#sDatasource#">
SELECT idCountryID
FROM tblCountry
WHERE idCountryID = #this.idCountryID#
</cfquery>
<cfcatch>
<cfscript>
objError = CreateObject("component","nec.com.system.errors");
iErrorID = objError.addError("save: checkID: #cfcatch.detail#");
</cfscript>
<cfreturn iErrorID>
</cfcatch>
</cftry>
<!---
// If it doesn't exist, then add the record, otherwise update the record
--->
<cfif not checkID.recordCount>
<cfreturn this.add()>
<cfelse>
<cfreturn this.update()>
</cfif>
</cffunction>
<!---
// Add
--->
<cffunction name="add" displayname="Add Country" returntype="numeric" output="false" hint="This adds a Country.">
<!---
// Check to see if that a different item isn't already using the same unique details
--->
<cftry>
<cfquery name="checkUnique" datasource="#sDatasource#">
SELECT idCountryID
FROM tblCountry
WHERE sCountryName = '#this.objFunctions.scrubText(this.sCountryName)#'
OR sISOCOde = '#this.objFunctions.scrubText(this.sISOcode)#'
</cfquery>
<cfcatch>
<cfscript>
objError = CreateObject("component","nec.com.system.errors");
iErrorID = objError.addError("add: checkUnique: #cfcatch.detail#");
</cfscript>
<cfreturn iErrorID>
</cfcatch>
</cftry>
<cfif checkUnique.recordCount>
<cfscript>
objError = CreateObject("component","nec.com.system.errors");
iErrorID = objError.addError("A Country with that name or ISO code already exists. idCountryID=#checkUnique.idCountryID#");
</cfscript>
<cfreturn iErrorID>
</cfif>
<cftry>
<cfquery name="add" datasource="#sDatasource#">
SET nocount on
INSERT INTO tblCountry(sCountryName, sISOCode, sDHLCode)
VALUES('#this.objFunctions.scrubText(this.sCountryName)#','#this.objFunctions.scrubText(t his.sISOCode)#','#this.objFunctions.scrubText(this.sDHLCode)#')
SELECT @@identity as autoID
SET nocount off
</cfquery>
<cfcatch>
<cfscript>
objError = CreateObject("component","nec.com.system.errors");
iErrorID = objError.addError("add: add: #cfcatch.detail#");
</cfscript>
<cfreturn iErrorID>
</cfcatch>
</cftry>
<cfreturn add.autoID>
</cffunction>
<!---
// Update
--->
<cffunction name="update" displayname="Update Country" returntype="numeric" output="false" hint="This updates a Country record.">
<!---
// Check to see if that a different item isn't already using the same unique details
--->
<cftry>
<cfquery name="checkUnique" datasource="#sDatasource#">
SELECT idCountryID
FROM tblCountry
WHERE (sCountryName = '#this.objFunctions.scrubText(this.sCountryName)#'
OR sISOCOde = '#this.objFunctions.scrubText(this.sISOcode)#')
AND idCountryID <> #this.idCountryID#
</cfquery>
<cfcatch>
<cfscript>
objError = CreateObject("component","nec.com.system.errors");
iErrorID = objError.addError("update: checkUnique: #cfcatch.detail#");
</cfscript>
<cfreturn iErrorID>
</cfcatch>
</cftry>
<cfif checkUnique.recordCount>
<cfscript>
objError = CreateObject("component","nec.com.system.errors");
iErrorID = objError.addError("Another Country with that name already exists. idCountryID=#checkUnique.idCountryID#");
</cfscript>
<cfreturn iErrorID>
</cfif>
<!---
// Attempt to update the record to the datasource
// if this fails for any reason then we submit an error message
// to the error component and return the ID of the error
--->
<cftry>
<cfquery name="update" datasource="#sDatasource#">
UPDATE tblCountry
SET sCountryName = '#this.objFunctions.scrubText(this.sCountryName)#',
sISOCode = '#this.objFunctions.scrubText(this.sISOCode)#',
sDHLCode = '#this.objFunctions.scrubText(this.sDHLCode)#'
WHERE idCountryID = #this.idCountryID#
</cfquery>
<cfcatch>
<cfscript>
objError = CreateObject("component","nec.com.system.errors");
iErrorID = objError.addError("update: update: #cfcatch.detail#");
</cfscript>
<cfreturn iErrorID>
</cfcatch>
</cftry>
<cfreturn this.idCountryID>
</cffunction>
<!---
// Delete
--->
<cffunction name="delete" displayname="Delete Country" returntype="numeric" output="false" hint="This deletes a Country record.">
<!---
// First of all we need to get the name of the data source we are going to be using
--->
<cfscript>
objDS = CreateObject("component","nec.com.system.settings");
sDatasource = objDS.getDatasource();
</cfscript>
<!---
// Now check to see if ithat ID exists
--->
<cftry>
<cfquery name="checkID" datasource="#sDatasource#">
SELECT idCountryID
FROM tblCountry
WHERE idCountryID = #this.idCountryID#
</cfquery>
<cfcatch>
<cfscript>
objError = CreateObject("component","nec.com.system.errors");
iErrorID = objError.addError("delete: checkID: #cfcatch.detail#");
</cfscript>
<cfreturn iErrorID>
</cfcatch>
</cftry>
<cfif not checkID.recordCount>
<cfscript>
objError = CreateObject("component","nec.com.system.errors");
iErrorID = objError.addError("A Country with that id doesn't exists, delete failed.");
</cfscript>
<cfreturn iErrorID>
</cfif>
<!---
// Now check to see if there are any dependancies, if so we can't delete the item
--->
<cftry>
<cfquery name="checkDependancies" datasource="#sDatasource#">
SELECT idCountry
FROM tblAddress
WHERE idCountry = #this.idCountryID#
</cfquery>
<cfcatch>
<cfscript>
objError = CreateObject("component","nec.com.system.errors");
iErrorID = objError.addError("delete: checkDependancies: idCountry: #cfcatch.detail#");
</cfscript>
<cfreturn iErrorID>
</cfcatch>
</cftry>
<cfif checkDependancies.recordCount>
<cfscript>
objError = CreateObject("component","nec.com.system.errors");
iErrorID = objError.addError("That Country is being used by an address, delete failed.");
</cfscript>
<cfreturn iErrorID>
</cfif>
<!---
// Now attempt to remove the record.
// if this fails for any reason then we submit an error message
// to the error component and return the ID of the error
--->
<cftry>
<cfquery name="delete" datasource="#sDatasource#">
DELETE FROM tblCountry
WHERE idCountryID = #this.idCountryID#
</cfquery>
<cfcatch>
<cfscript>
objError = CreateObject("component","nec.com.system.errors");
iErrorID = objError.addError("delete: delete: #cfcatch.detail#");
</cfscript>
<cfreturn iErrorID>
</cfcatch>
</cftry>
<cfreturn this.idCountryID>
</cffunction>
</cfcomponent> -
How do i get my serial number for lightroom when it was purchased from the app store?
how do i get my serial number for lightroom when it was purchased from the app store now that the app store has discontinued selling the product?
Thanks
-EthanPurchases from the App Store do not include serial numbers. The App Store itself provides the licensing for the product. You will have to contact Apple to have them help you reinstall Lightroom through the App store (just because it is no longer for sale does not mean that you will not be able to download your past purchases).
-
Periodic Alert-How to send all the records returned from the SQL in a mail?
Hello all,
I have defined a Periodic Alert, my SQL query returns more than one record whenever I run it. I also defined an action to send an email with the message consisting of the output variables from the SQL. Whenever i run this alert, a mail is being sent for every single record returned from the query. But i want to send a single mail containing all the records information that my SQL query returns.
For Example: My SQL query lists all the users created on current date.
Select User_Id, User_Name into &OUTPUT1, &OUTPUT2
from fnd_users where trunc(creation_date) = trunc(sysdate)
Now i want to send a mail with all the users information from the above query, to SYSADMIN. How can this be achieved?
Thanks & Regards
chakooHi Chakoo,
If the Periodic Alert is not working as requried. You can write a simple package with 3 procedures to implement the writing output to a out file and simultaneuosly send email to multiple receiptents.
Example:
Create Package xx_pac
Create public Procedure P1
begin
Select User_Id, User_Name into &OUTPUT1, &OUTPUT2
from fnd_users where trunc(creation_date) = trunc(sysdate)
fnd_file.put_line (fnd_file.output, &OUTPUT1, &OUTPUT2);
end;
(Create private Procedure P2
begin
---Write the email package using the UTL_SMTP approch. Using this approch you can send the procedure P1 output file as an attachment to the desiginated receiptents.
end;
(Create public Procedure P3
begin
---call the procedure P1 using the "g_request_id = fnd_request.submit_request"
---Wait for the above procedure to complete using "l_conc_status := fnd_concurrent.wait_for_request" procedure.
---call the procedure P2. (When called you must provide the correct to, from address)
end;
end;
Register the Package xx_pac as a concurrent program and schedule when submit it from the request.
Regards
Arun Rathod -
hi, I just returned from the Apple Store in Larkspur CA and paired my wireless mouse with one of their computers, but it's won't pair with mine at home. Bluetooth is on and it recognizes the wireless keyboard, see's the wireless mouse but won't pair.
While you are waiting for the new charger, go ahead and reset you SMC:
http://support.apple.com/kb/HT1411 -
Updating content on return from the portlet edit URI
I have written a portlet with a pageflow content URI and a pageflow edit URI. The
content URI pageflow displays some formatted data obtained from a combination
of portlet preferences and database records. The edit URI pageflow allows the
user to add records to the display, delete records from the display, or re-format
the displayed records. The edit URI pageflow is executed by clicking the “edit”
button on the portlet titlebar.
The problem is when I click the “Leave Edit” button on the portlet titlebar and
return to the content page, the display is not updated to show the additions,
deletions, or re-formats performed by the user in the edit URI pageflow. The user
must log out and log back in to see the changes.
How can I cause the portlet to re-execute the begin action on it’s content URI
pageflow when returning from the edit URI pageflow so the user doesn’t need to
log out and log back in?Heay.....this worked for me.
I am able to change the mode programatically from edit to show.
HttpPortletRendererUtil.handleEditAction(portletRenderRequest,"OK");
I removed Apply , OK and Cancel buttons and applied my own Submit and Back button in Personalize mode and then change the mode to show on click of Back button using the above mentioned statement.
Thanks
~Neeraj Sidhaye
Try_Catch_Finally @ Y !
ExtremePortal @ Gmail Dot Com
Maybe you are looking for
-
Passing 2 or more Items values in an APEX URL
Hi all- I found many threads with a similar title but no one was exactly what I am looking to do. so here is the deal : I have two items on page 3 called P2_X , P2_Y . In page 2 I want to click on a button that will go to page 3 and set the values of
-
How to add send recipet in mail
How to add send mail receipt in mail.
-
Can I make reporting with Sun Java Studio Creator !
Hi ! I would like to know if it is possible to make reporting within a webpage build with JSC ! Thank !
-
I have several projects ive developed with FB 4.6 on winxp. I purchased a new win8 pc since the old pc began to fail, and purchased FB 4.7 64bit for my win8 pc, I only wanted the serial which i presumed i could use to register FB 4.6, which you cant
-
Make Colums height in IE and FF the same
Is there a Hack to make the columns the same hegiht in FF and IE? As the content is differnt on each page I need the colums to even up on each page, escpecially the right hand column. Please preview the bottom right column in both and you will see w