Tables for Order & Workcenter
Hello All,
Is there any table i can get details of production order with workcenter details for operation 0010. I would require for a given production order i would require the work center used at operation level 0010. Either direct table or indirect table, do please let me know.
Thanks
With Regards
GJ
Hi nandha,
Thanks a lot for your quick reply. The problem is im not a PP consultant, im a FICO Consultant. i have requirement in CO-PA while settling the production order based on the production order i would like to capture the workcenter details too. i tried deriving workcenter by AFKO -> PLPO -> CRHD, but the problem here is in table AFKO the field ZAEHL is different from field ZAEHL in table PLPO, so im getting incorrect values. It gives workcenter used other than in opereation 0010.
Now i tried another derivation AFKO -> AFVC -> CRHD, in this logic i dont have value for field APLZL in AFKO, either i can hardcore the values because some materials have group counter more than 1.
Could you please help me out in achieving this, basically in CO-PA if i need to derive the values from tables, i need to fulfill all the keyfields in the table, then i would get the correct values
Thanks a lot again for quick reply.
Thanks
With Regards
GJ
Similar Messages
-
USER STATUS TABLE FOR ORDER MASTER
Hi
Please reply the Data table name for the field "USER STATUS" under control data tab of Order master.
Regards
Prakash.Hi,
The statuses for orders are strored in JEST table.
Regards,
Eli
P.S. Please, avoid posting in CAPITAL letters -
Name of table for order Vs item category
Hi Experts
What is the table or Function module to get the list of service orders with reference to item categories used in the line item .
Eg : List of orders with item category "ZSR3"
Here my input will be item category "ZSR3" and the out put expected is the service orders which contains the item category - ZSR3.
Regards
RajHello Shantala
thanks for the response
I checked both tables , but i do not find the field for item category in the table . hence not able to get details of order Vs Item category.
Regards
Rajesh S -
Hi,
In creation of MAINTENANCE ORDER, I need to create a Search help for Work Center and Plant based on :
1. Order type
2. Planning plant
3. Business area
Could you help me out by letting me know what are the master tables having these fields.
Regards,
Srilakshmi B* Validate Work Centre
if not ZES_PO_ITEM-ST_ARBPL is initial.
clear : T399X.
select single * from T399X where WERKS = ZES_PO_ITEM-ST_SWERK
and AUART = ZES_PO_ITEM-ST_AUART.
if SY-SUBRC = 0.
call function 'CR_WORKSTATION_READ_ROUTING'
exporting
ARBPL = ZES_PO_ITEM-ST_ARBPL
DATE = SY-DATUM
PLNTY = T399X-PLNTY
WERKS = ZES_PO_ITEM-ST_SWERK."L_SWERK. "Changed on 27th Feb
if SY-SUBRC <> 0.
message E138(ZSM) with 'Work Centre not maintained for plant' ZES_PO_ITEM-ST_IWERK.
endif.
endif.
endif.
Regards
Gopi -
Table for orders created by IP10
HI friends,
Can any one tell me the table name in which the orders created through IP10(Scheduling Maintenance plan) are stored.
Thanks
Vivekhi
you can check in MHIO table where you can get the order generated for the maintenance plan
regards
thyagarajan -
How to get all production orders for a workcenter
Hello ...
I have a requirement to create a report of all production orders for a given workcenter. The user enters the workcenter (CRHD-ARBPL), plant (CRHD-WERKS) and a date range, and wants to see a list of orders (AUFNR) that fall within that date range along with some other data from AFKO and AFPO.
I can't figure out a good, consistent way to get from workcenter to production orders.
Any ideas?
Thanks!
SharonHi there check this program for relation between SO PO and Production order
REPORT z_so_info.
TABLES: vbak, vbap, afko, afpo.
*Field catalog
TYPE-POOLS: slis.
DATA: lv_repid TYPE sy-repid VALUE sy-repid,
xfield TYPE slis_t_fieldcat_alv,
afield TYPE slis_fieldcat_alv.
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-001.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 1(25) text-002.
SELECT-OPTIONS: so_so FOR vbak-vbeln OBLIGATORY.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN END OF BLOCK b1.
SELECTION-SCREEN BEGIN OF BLOCK b2 WITH FRAME TITLE text-003.
PARAMETERS:
p_kunnr LIKE vbak-kunnr, " sold-to
p_kunwe LIKE vbak-kunnr. " ship-to
SELECTION-SCREEN END OF BLOCK b2.
*Constants
CONSTANTS: c_zor TYPE vbak-auart VALUE 'ZOR',
c_we TYPE vbpa-parvw VALUE 'WE',
c_ag TYPE vbpa-parvw VALUE 'AG'.
* c_space TYPE space.
*Ranges
RANGES: ra_parvw FOR vbpa-parvw,
ra_kunnr FOR vbpa-kunnr.
*Tables
DATA: BEGIN OF gt_output OCCURS 0,
vbeln LIKE vbak-vbeln, " sales order number
posnr LIKE vbap-posnr, " SO item number
matnr LIKE vbap-matnr, " material number
sh LIKE vbpa-kunnr, " Ship-to
sp LIKE vbpa-kunnr, " Sold-to
lifnr LIKE ekko-lifnr, " Vendor
bstnk LIKE vbak-bstnk, " PO number
banfn LIKE vbep-banfn, " Purchase requi
po_st TYPE char30, " PO status text
pstyv TYPE vbap-pstyv, " Item catagory
aufnr LIKE afpo-aufnr, " Production Order
prd_stat TYPE string, " Prd order status
END OF gt_output.
DATA: wa_output LIKE gt_output.
FIELD-SYMBOLS: <fs_output> LIKE gt_output.
*Table for sales order and PO
TYPES : BEGIN OF gs_data,
vbeln TYPE vbak-vbeln,
posnr TYPE vbap-posnr,
pstyv TYPE vbap-pstyv,
matnr TYPE vbap-matnr,
END OF gs_data.
DATA: gt_data TYPE STANDARD TABLE OF gs_data,
wa_data TYPE gs_data.
*Table for Production Orders
TYPES: BEGIN OF gs_prd,
aufnr TYPE afpo-aufnr,
posnr TYPE afpo-posnr,
kdauf TYPE afpo-kdauf,
kdpos TYPE afpo-kdpos,
wepos TYPE afpo-wepos, "Goods Receipt Indicator
elikz TYPE afpo-elikz, "Delivery Completed Indicator
objnr TYPE aufk-objnr, "Object number
* getri TYPE afko-getri, "Confirmed Order Finish Date
* gltri TYPE afko-gltri, "Actual finish date
END OF gs_prd.
DATA: gt_prd TYPE STANDARD TABLE OF gs_prd,
wa_prd TYPE gs_prd.
*Table for partner data
TYPES: BEGIN OF gs_partner,
vbeln TYPE vbak-vbeln,
posnr TYPE vbap-posnr,
parvw TYPE vbpa-parvw,
kunnr TYPE vbpa-kunnr,
END OF gs_partner.
DATA: gt_partner TYPE STANDARD TABLE OF gs_partner,
wa_partner TYPE gs_partner.
TYPES: BEGIN OF gs_po,
ebeln TYPE ekkn-ebeln,
ebelp TYPE ekkn-ebelp,
vbeln TYPE ekkn-vbeln,
vbelp TYPE ekkn-vbelp,
END OF gs_po.
DATA: gt_po TYPE STANDARD TABLE OF gs_po,
wa_po TYPE gs_po.
TYPES: BEGIN OF gs_preq,
vbeln TYPE vbep-vbeln,
posnr TYPE vbep-posnr,
banfn TYPE vbep-banfn,
END OF gs_preq.
DATA: gt_preq TYPE STANDARD TABLE OF gs_preq,
wa_preq TYPE gs_preq.
TYPES: BEGIN OF gs_po_stat,
ebeln TYPE ekko-ebeln,
procstat TYPE ekko-procstat,
lifnr TYPE ekko-lifnr,
END OF gs_po_stat.
DATA: gt_po_stat TYPE STANDARD TABLE OF gs_po_stat,
wa_po_stat TYPE gs_po_stat.
*Field symbols
FIELD-SYMBOLS: <fs> TYPE tj02t-txt04,
<fs_temp> TYPE tj02t-txt04,
<fs_stat> TYPE char30.
START-OF-SELECTION.
PERFORM fr_build_range.
PERFORM fr_get_data.
PERFORM fr_build_fc.
PERFORM fr_output.
*& Form fr_get_data
* text
* --> p1 text
* <-- p2 text
FORM fr_get_data.
*Get SO
SELECT a~vbeln a~posnr a~pstyv a~matnr
FROM vbap AS a
JOIN vbak AS b
ON a~vbeln = b~vbeln
JOIN vbpa AS c
ON b~vbeln = c~vbeln
INTO TABLE gt_data
WHERE b~vbeln IN so_so
AND b~auart EQ c_zor "Only Sales Orders
AND c~kunnr IN ra_kunnr. "from selection screen
DELETE ADJACENT DUPLICATES FROM gt_data COMPARING vbeln posnr.
*get data of the production order
IF NOT gt_data[] IS INITIAL.
SELECT a~aufnr a~posnr a~kdauf a~kdpos a~wepos a~elikz
b~objnr
FROM afpo AS a
JOIN aufk AS b
ON a~aufnr = b~aufnr
INTO TABLE gt_prd
FOR ALL ENTRIES IN gt_data
WHERE a~kdauf EQ gt_data-vbeln
AND a~kdpos EQ gt_data-posnr.
ENDIF.
*Get partner data
IF NOT gt_data[] IS INITIAL.
SELECT vbeln posnr parvw kunnr
FROM vbpa
INTO TABLE gt_partner
FOR ALL ENTRIES IN gt_data
WHERE vbeln EQ gt_data-vbeln.
ENDIF.
*Get Purchase Order
IF NOT gt_data[] IS INITIAL.
SELECT ebeln ebelp vbeln vbelp
FROM ekkn
INTO TABLE gt_po
FOR ALL ENTRIES IN gt_data
WHERE vbeln EQ gt_data-vbeln
AND vbelp EQ gt_data-posnr.
SELECT vbeln posnr banfn
FROM vbep
INTO TABLE gt_preq
FOR ALL ENTRIES IN gt_data
WHERE vbeln EQ gt_data-vbeln
AND posnr EQ gt_data-posnr.
ENDIF.
IF NOT gt_po[] IS INITIAL.
SELECT a~ebeln a~procstat a~lifnr
FROM ekko AS a
JOIN ekpo AS b
ON a~ebeln = b~ebeln
INTO TABLE gt_po_stat
FOR ALL ENTRIES IN gt_po
WHERE b~ebeln EQ gt_po-ebeln
AND b~ebelp EQ gt_po-ebelp.
ENDIF.
*Move data to output table
LOOP AT gt_data INTO wa_data.
wa_output-vbeln = wa_data-vbeln.
wa_output-posnr = wa_data-posnr.
wa_output-pstyv = wa_data-pstyv.
wa_output-matnr = wa_data-matnr.
READ TABLE gt_po INTO wa_po WITH KEY vbeln = wa_data-vbeln
vbelp = wa_data-posnr.
IF sy-subrc EQ 0.
wa_output-bstnk = wa_po-ebeln.
READ TABLE gt_po_stat INTO wa_po_stat WITH KEY ebeln = wa_po-ebeln.
IF sy-subrc EQ 0.
wa_output-lifnr = wa_po_stat-lifnr.
CASE wa_po_stat-procstat.
WHEN '01'.
wa_output-po_st = 'Version in process'.
WHEN '02'.
wa_output-po_st = 'Active'.
WHEN '03'.
wa_output-po_st = 'In release'.
WHEN '04'.
wa_output-po_st = 'Partially released'.
WHEN '05'.
wa_output-po_st = 'Released Completely'.
WHEN '08'.
wa_output-po_st = 'Rejected'.
ENDCASE.
ENDIF. "inner read subrc
ENDIF. "outer read subrc
READ TABLE gt_preq INTO wa_preq WITH KEY vbeln = wa_data-vbeln
posnr = wa_data-posnr.
IF sy-subrc EQ 0.
wa_output-banfn = wa_preq-banfn.
ENDIF.
READ TABLE gt_prd INTO wa_prd WITH KEY kdauf = wa_data-vbeln
kdpos = wa_data-posnr.
IF sy-subrc EQ 0.
wa_output-aufnr = wa_prd-aufnr.
*get the purchase requisition for production order as well
SELECT SINGLE banfn
FROM ebkn
INTO wa_output-banfn
WHERE aufnr EQ wa_prd-aufnr.
*Get the status of the production order
PERFORM fr_get_prd_stat USING wa_prd-objnr
CHANGING wa_output-prd_stat.
ENDIF. " sy-subrc
READ TABLE gt_partner INTO wa_partner WITH KEY vbeln = wa_data-vbeln
parvw = c_we.
IF sy-subrc EQ 0.
wa_output-sh = wa_partner-kunnr.
ENDIF.
READ TABLE gt_partner INTO wa_partner WITH KEY vbeln = wa_data-vbeln
parvw = c_ag.
IF sy-subrc EQ 0.
wa_output-sp = wa_partner-kunnr.
ENDIF.
APPEND wa_output TO gt_output.
CLEAR: wa_data, wa_prd,wa_partner,wa_output.
ENDLOOP.
ENDFORM. " fr_get_data
*& Form fr_build_range
* text
* --> p1 text
* <-- p2 text
FORM fr_build_range .
*Range for partner function
MOVE 'I' TO ra_parvw-sign.
MOVE 'EQ' TO ra_parvw-option.
MOVE 'SH' TO ra_parvw-low. " we
APPEND ra_parvw.
CLEAR ra_parvw.
MOVE 'I' TO ra_parvw-sign.
MOVE 'EQ' TO ra_parvw-option.
MOVE 'SP' TO ra_parvw-low. " ag
APPEND ra_parvw.
CLEAR ra_parvw.
*Range for ship-to and sold-to
MOVE 'I' TO ra_kunnr-sign.
MOVE 'EQ' TO ra_kunnr-option.
MOVE p_kunnr TO ra_kunnr-low.
APPEND ra_kunnr.
CLEAR ra_kunnr.
MOVE 'I' TO ra_kunnr-sign.
MOVE 'EQ' TO ra_kunnr-option.
MOVE p_kunwe TO ra_kunnr-low.
APPEND ra_kunnr.
CLEAR ra_kunnr.
ENDFORM. " fr_build_range
*& Form fr_build_fc
* text
* --> p1 text
* <-- p2 text
FORM fr_build_fc .
* sales order number
afield-fieldname = 'VBELN'.
afield-seltext_s = 'Sales #'.
afield-ref_tabname = 'VBAK'.
APPEND afield TO xfield. CLEAR afield.
* sales ITEM number
afield-fieldname = 'POSNR'.
afield-seltext_s = 'Item #'.
afield-ref_tabname = 'VBAP'.
APPEND afield TO xfield. CLEAR afield.
* Material Number
afield-fieldname = 'MATNR'.
afield-seltext_s = 'Material #'.
afield-ref_tabname = 'VBAP'.
afield-outputlen = 10.
APPEND afield TO xfield. CLEAR afield.
*Vendor Number
afield-fieldname = 'LIFNR'.
afield-seltext_s = 'Vendor Num.'.
afield-ref_tabname = 'EKKO'.
APPEND afield TO xfield. CLEAR afield.
* ship-to-party
afield-fieldname = 'SH'.
afield-seltext_s = 'Ship-to'.
afield-ref_tabname = 'VBPA'.
APPEND afield TO xfield. CLEAR afield.
* sold-to-party
afield-fieldname = 'SP'.
afield-seltext_s = 'Sold-to'.
afield-ref_tabname = 'VBPA'.
APPEND afield TO xfield. CLEAR afield.
*PO number
afield-fieldname = 'BSTNK'.
afield-seltext_s = 'PO NUM'.
afield-ref_tabname = 'EKKO'.
APPEND afield TO xfield. CLEAR afield.
*PO status
* afield-fieldname = 'PO_STAT'.
* afield-seltext_s = 'Step'.
* afield-ref_tabname = 'zbacklog_v2'.
* APPEND afield TO xfield. CLEAR afield.
*PO step status
afield-fieldname = 'PO_ST'.
afield-seltext_s = 'PO.Status'.
afield-ref_tabname = 'zbacklog_v2'.
APPEND afield TO xfield. CLEAR afield.
*Purchase requisition
afield-fieldname = 'BANFN'.
afield-seltext_s = 'Pur. Req.'.
afield-ref_tabname = 'VBEP'.
APPEND afield TO xfield. CLEAR afield.
*Item catagory
afield-fieldname = 'PSTYV'.
afield-seltext_s = 'Itm. Catg'.
afield-ref_tabname = 'VBAP'.
APPEND afield TO xfield. CLEAR afield.
*Prodcution Order number
afield-fieldname = 'AUFNR'.
afield-seltext_m = 'Prod.Order'.
afield-ref_tabname = 'AFKO'.
APPEND afield TO xfield. CLEAR afield.
*PRODCUTION status
afield-fieldname = 'PRD_STAT'.
afield-seltext_s = 'Prd. Step'.
afield-ref_tabname = 'zbacklog_v2'.
afield-outputlen = 20.
APPEND afield TO xfield. CLEAR afield.
*PRODUCTION step status
* afield-fieldname = 'PRD_ST'.
* afield-seltext_s = 'Prd. Status'.
* afield-ref_tabname = 'zbacklog_v2'.
* APPEND afield TO xfield. CLEAR afield.
ENDFORM. " fr_build_fc
*& Form fr_output
* text
* --> p1 text
* <-- p2 text
FORM fr_output .
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
EXPORTING
i_callback_program = sy-repid
* I_CALLBACK_PF_STATUS_SET = ' '
* I_CALLBACK_USER_COMMAND = ' '
* I_STRUCTURE_NAME =
* IS_LAYOUT =
it_fieldcat = xfield[]
i_default = 'X'
i_save = 'A'
TABLES
t_outtab = gt_output
EXCEPTIONS
program_error = 1
OTHERS = 2.
ENDFORM. " fr_output
*& Form fr_get_prd_stat
* text
* -->P_WA_PRD_OBJNR text
FORM fr_get_prd_stat USING p_objnr CHANGING p_prd_stat.
DATA: lt_status TYPE STANDARD TABLE OF jstat,
wa_status TYPE jstat,
lv_status TYPE tj02t-txt04,
lv_temp2 TYPE char5,
lv_buff TYPE string.
CALL FUNCTION 'STATUS_READ'
EXPORTING
client = sy-mandt
objnr = p_objnr
only_active = 'X'
TABLES
status = lt_status
EXCEPTIONS
object_not_found = 1
OTHERS = 2.
LOOP AT lt_status INTO wa_status.
IF wa_status-stat(1) EQ 'I'.
SELECT txt04 FROM tj02t
INTO lv_status
WHERE istat EQ wa_status-stat
AND spras EQ 'E'.
ENDSELECT.
lv_temp2 = lv_status.
CONCATENATE lv_temp2 p_prd_stat INTO p_prd_stat
SEPARATED BY ','.
ENDIF.
CLEAR: wa_status, lv_status, lv_temp2.
ENDLOOP.
lv_buff = p_prd_stat.
*Status of Production Order
IF lv_buff CS 'CRTD'.
p_prd_stat = 'Not Active'.
ENDIF.
IF lv_buff CS 'REL'.
IF lv_buff CS 'GMPS'.
p_prd_stat = 'Printed In Prod'.
ELSE.
p_prd_stat = 'Printed'.
ENDIF.
ENDIF.
IF lv_buff CS 'TECO'.
p_prd_stat = 'Technically Compt.'.
ENDIF.
ENDFORM. " fr_get_prd_stat -
Table for purchase order status
Hello friends,
There's a tab STATUS in purchase order (tcoe ME21N).
I can't find a table which contains theses statuses.
Anybody knows what's the table for purchase orders status ??
Regards,
BahiaHi
PO status is stored in Structure not in the table.
Please use the List displays to get the information like ME2N,ME2L, ME2M, ME2K etc
You can also get the information from the table EKKO, EKPO, EKET,EKBE
Hope it helps
thanks/karthik -
Table for Open Order Qty......
Hi Experts,
In Sales Order there are multiple schedule line for single item.
Where and in which table i can find open qty for order ,material, item and schedule line items.
I Want open items for each schedule line. For One vbeln, posnr there multiple etenr.
Urgent,
Yusuf.YUSUF BHORI wrote:>
> Hi Experts,
>
> In Sales Order there are multiple schedule line for single item.
>
> Where and in which table i can find open qty for order ,material, item and schedule line items.
>
> I Want open items for each schedule line. For One vbeln, posnr there multiple etenr.
>
> Urgent,
>
> Yusuf.
Hi Yusuf,
you can use VBEP for this....
go to SE16 type VBEP in VBEP u can put the schedule line category for which you need to find the open items...
hope this helps...
Regards
Abhisheki Swarup -
Dear Gurus
In which table can we get the open production order quantities and the gr dates.
Regards
Sandip SarkarHi,
Please find below tables
Production orders
AUFK Production order headers
AFIH Maintenance order header
AUFM Goods movement for prod. order
AFKO Order header data PP orders
AFPO Order item
RESB Order componenten
AFVC Order operations
AFVV Quantities/dates/values in the operation
AFVU User fields of the operation
AFFL Work order sequence
AFFH PRT assignment data for the work order(routing)
JSTO Status profile
JEST Object status
AFRU Order completion confirmations
Regards
SANIL -
Sales Order Unable to Use New Condition Tables for Tax Condition Type
Dear All,
I am currently working on SAP R/3 4.0. I have a new requirement for my tax where I need to create new condition tables other than the 4 standard SAP tables which are Customer/Material, Division/Customer, Departure Country/Destination Country, Domestic Taxes and Export Taxes. My new tables consists of Departure Country/Destination Country/Shipping Point/Tax Code. The requirement is that the tax code is based on the chosen destination country and shipping point. The problem I am facing now is that no matter what types of table I create or even I generate with reference to the standard table, the access sequence will only refer to the 4 standard SAP tables above. Even if I put my own table in the highest priority for the access sequence, the same thing happens. My sales order will only pick up date from the standard table.
I wonder if anyone encountered the same problem as me.
Kindly advise.
Thank you.
Regards,
YvonneHi
Yvonne
I suggest fist check a simple thing ,whether u have successfully determined shipping point for each line item ,it is possible that just adding a line item will not trigger shipping point determination . So after u update the shipping point on line level u can rerun pricing and check agian if u r getting it .
Secondly for tax purposes I suggest Try to have Customer and material tax classification approach this allows to u have long term flexibiliy and also reduces your maintenance activity . As if u change or add number of shipping points and business changes using the sequence of shipping point ,the logic of just using shipping point will not work.
In Tax classification u cna add new condition table for each new tax category and use it in different access sequences.
This information can be passed on to FI using Different Tax code for Different combination.
I hope this helps
Regards
Mandar -
What is table field name for order status report of rate per unit and bal
hi i want to make FS for order status report i almost get all table and field but i don't get only two field rate per unit and balance value table field didn't get please help me searching in field and table
i want to develop my status reportHi,
Check tables VBAK and VBAP wherein you will get all header and item details.
VBUK and VBUP for header and line item statuses.
KONV would give you rates/pricing details for each condition type determines in the sales order.
VBAK-KNUMV = KONV-KNUMV is how you relate both of them.
Hope that helps.
Regards,
Amit -
SAP Tables for Open Customer Orders and Sales History
Dear Experts.
I am looking to get SAP SD related tables for the following,
1) SAP tables for Open Customer Orders
From SAP, I need to get all tables that Contain all open customer orders for products.
2) Sales History
From SAP, I need to get all tables that contain the previous month's sales history (shipped customer orders).
Please Help!!hi
check the following link
http://www.erpgenie.com/abap/tables_sd.htm
hope it will help you
regards,
sreelatha gullapalli -
User exits to update a Zfield in AUFK table for T-code KO01(Order Creation)
Hi all,
I have a custom field(zZTEST) in aufk and coas struture(zztest) in order to display in the output generated by kok5 for order.
The reason for adding in coas struture is the ALV output in kok5 uses coas structure
I know aufk table gets an entry while creating an order in ko01.
When i save the order (i.e when i succesfully create an order) i have to pass a value to aufk-zztest so that the custom field in aufk for that internal order created has an value.
I was looking at the user exits available for ko01
i found 5 user exits for ko01
Exit Name---Description
COOPA002---Customer function for master data maint. - internal
COOPA003---User-Defined Fields in the Order Master
COOPA004---Customer function: Print order master data
COOPA_01---Customer check modules for internal orders
KKAZ0001---Customer check modules for internal orders
I have written the code break-point in all the includes associated with this USER EXITS.
Out of this only only 2 includes gets triggered when i click General data and investments tab .
I have the code in both of them and the aufk tables gets updated when i save an internal order and i can see the value in kok5 output as well.
To be frank this is what i want.
But my only worry is that when we create a new internal orders we don't have any data to be filled i.e mandatory fields in General data and INvestments tab.
i.e. user can create an internal order without even going to these tabs(General data and INvestments tab) in that case the custom field doesn't get updated and as a result of that i don't see that value in KOK5 ALV output.
Let me know what can be done or is there any other way that this can be achieved or the way i approached is right or wrong or am i am missing any user exits and the system is at 4.6c.
Thanks
VenkatHi,
Any suggestions on this post
Thanks -
Table for characteristics values in the sales order
Hi Experts
I am entering the characteristics values in the classification screen in the sales order.
I want to capture the characteristics & values with reference to the individual sales order for reports.
Please let me know the tables for the same as it doesn't get capture in the item table..
Thanks
Ganesh
Edited by: jganesh on May 4, 2011 1:26 PMHiii,
you may use VELO01_GET_CONFIGURATION function module to pass VBAP-CUOBJ value
Hope it will solve your problem.
Regards
Shambhu Sarkar -
Table for transaction code for creation of process order
Hi Gurus,
Please tell me, in which table i can see the transaction code used to create process order.
regards
KaisarHi,
Table for transactions is TSTC.
If your looking for t-code for process order - COR1.
Regards,
Vivek
Maybe you are looking for
-
When I sync my iPad my movies don't show up on my computer... This is stupid, I am not going to turn my computer on every time I want to download a movie for my kids and then move it to my iPad... If this is the case I will be better off buying a por
-
Hi folks, Note: I've found a way to post images... here they are... [http://i1087.photobucket.com/albums/j480/_Melk_/iGoogle_Firefox_broken2.png iGoogle Firefox Broken (same in version 5.x, 6.x & 7.x)] [http://i1087.photobucket.com/albums/j480/_Melk_
-
Material Blocked by another user
Hi, Can you confirm, At a time multiple user can create Sale/ PO Order with Same material & plant. kindly confirm. Regards, Venkat
-
Hello Im currently having some issues with Premiero Pro (via creative suite 6) on a Windows 8 64 bit machine after reinstalling due to an error resulting in the encoding sequence crashing/hanging and remaining on 0% indefinitly Video and aud
-
LR 1.4 Question about Group Edit Capture Time
Hey guys... working my way through... Was wondering -- when I highlight a group of files -- and then go to the Metadata Menu and choose "Edit Capture Time" -- why doesn't it change the date of all the High-Ligghted Photos? I am obviously doing someth