Tables for pegged requirement
Hi Gurus,
Can you please tell me the tables ( for both planned order and prodution order) name to get the pegged requirement?
Regards
Rajib Pathak
Hi sankaran,
Thanks for the reply. Actually I need to extract data from CM50 report output. I need the values from following fields.
Pegged requirements
Activity/operation
Pegged rqmts type
Pegged reqmt qty
Total capacity reqmts
Material
Work Center
Plant
Available Capacity
Can you please tell me the list of corresponding tables to do this.
Similar Messages
-
HI,
I need to develop a report to identify the pegged requirement against purchase requsition for the dependent requirements of low-level components. i have checked MD_PEGGING and MD_PEGGING_NODIALOG but these FM are not suitable for my requirement. Since i need to get the sale order deatils by passing PR number.
Please share your thoughs on this.
Thanks & Regards,
Renuga.AYes, after running FM MD_SALES_ORDER_STATUS_REPORT or MD_stock_requirement list _API
Fetch the data which have DELKZ "BA" -( purchase requisition) from the result of above FM
and pass the data into FM MD_PEGGING_NODIALOG &get the relevant sale order line item -
HI All,
For the given Purchase Req item , where ( in which table ) the pegged requirements get stored .
I want to know pegged requirement with the input of Purchase Req number.
Thanks in advance
vengaCheck function Module "MD_PEGGING_NODIALOG"
table PBIM, PBED -
Table details required for pegged requirements
Dear All,
I have the following scenario.
One child components is required for three different header materials. After MRP run, In MD04, three diffenerent planned orders will be there for child component for three reservations of three Header materials. I want to see the immediate header level of the child component through tables for report purpose. If you see through the function module MD_PEGGING or MD_PEGGING_NODIALOG, it is showing the top most header material. But it is not showing the immediate header material for the child component planned order. Please guide me to get the immediate header material through table or function module or any.
Thanks in advance.
Vijay.Check these tables.
MDTB,PLAF. -
Table for dependent requirements
Hi Experts,
When we convert a planned order of a FG in the MD04 screen, is there a way that production orders for dependent requirements also get created for the inhouse produced materials? In which table can I find a link between the order of FG to the order of SFG?
Regards,
Sachin
Edited by: swing swiss on Jan 15, 2010 9:39 PMHi,
Are you woking Collective Orders ?
If you're not, then there is no link between the FG SFO & SFG SFO. But you can refer to the table RESB & in that the field BAUGR will give the pegged material info for a particular material - order combination.
Regards,
Vivek -
Table For Capacity requirements
Hello Every one,
Does any body know the table which contains details for capacity requirements raised for a planned order and production order raised for a specific tme period for multiple capacity categories.
The table should contain or a logic should exist to link the following fields:
1. Planned order, production order
2. Capacity requirements
3. Capacity category.
4. Period
This is because my current uses capacities of 2 capacity categories (machine and labor) to plan production.
Sincerely,
AjiHello Aji,
Please find the tables:
KBKO Header record for capacity requirements
KAKO Capacity Header Segment
KAKT Capacity Description
KAZY Intervals of Capacity
KBKO Header record for capacity requirements
KBED Capacity requirements records
KBKO Header record for capacity requirements
KBED Capacity requirements records
KBEZ Add. data for table KBED (for indiv. capacities/splits)
TC26 Capacity category
Regards,
Alok Tiwari -
Table for Stock Requirement List related information
Dear Sir,
We have make-to-order scenario , on receiving the Order from Customer we first create a Sale-Order for the Ordered Item . Subsequently in MD04 , we find a requirement getting reflected for the Customer Order .
For example say the Sale-Order number is S-101 and the Line Item is 10 for the FERT material say FERT-101 having the Order quantity as 1 number . In MD04 , we find a requirement getting reflected with the following information :
MRP Element --> CustOrd
MRP element data --> S-101 / 00010 / 0001
Recd/Reqd Qty --> 1-
Available Qty --> 1-
We need to write a Z program for getting the list of the requirements against the Customer Order (as shown in MD04) .
Kindly guide us as which Tables we need to refer for getting the above information pl .
We assure to award full points for the suggested solution .
Rgds
B MittalHi,
Pls use below function module, same as you will get Stock Requirement List related information
MD_STOCK_REQUIREMENTS_LIST_API
For test, goto SE37 and test it
Regards,
Sankaran -
Table for Demand/Requirements quantity
Hi ,
Can you help me determine if there is a table in PP and MM module that contains the demand or requirements quantity for each material? I need to create a customized report that will show the demand per period of time(monthly).
Thanks in advance.
Regards,
Melvin SalayoHi,
Check the below tables you will get the reuired stuff
*Planned indepedent requirements:*
PBIM Independent requirements for material
PBED Independent requirement data
PBHI Independent requirement history
PBIV Independent requirement index
PBIC Independent
Reservations
RESB Material reservations
RKPF header
Thanks
Satya -
Dear Cons
In a service p.o we have given service qty. as 10 ea & price 100/- inr . we want in which table this data is going to store. Also for Text entered in the doc. Header , for this we want to know in which table it will available.
thanks
nrkHi
Check table ESLL.
regards
rb -
Tables for MRP requirements quantity.
Dear Experts,
I have requirements where in I want to know the table from which I will get the the material requirements quantity.
Example is as below;
I have given PIR through MD61 of "ABC" material as 100 qty.
After this through MD02 i will generate requirements which will appear in Stock Requirements list MD04.
If stock is available then accordingly it will create PR/Planned order.
Here my requirement is that i want to display pure requiremnets that is 100 qty irrespective of what stock is available.
In which table i will get this pure requiremts.
Please help.Hi,
Please check in table:
PBED - PIR items
MDKP
MDTB
Also you can use FM: MD_STOCK_REQUIREMENTS_LIST_API. Best is use this FM.
Regards,
Alok Tiwari
Edited by: Alok Kumar Tiwari on Dec 14, 2011 11:28 AM -
Hi all sap expert.
i have been looking for pegged requirement table. i able to find out few table PBIM , PBED and PBHI, but none of the able for me to key in planned order number.
but i puzzled with the how to get the pegged requirment. since i have a report format is in query.
using MD04 , i am able to see the pegged requirement. i am also try to use MD09 but just one pegged requirement can view at all time.
i wonder , is there any table
using planned order number to locate the pegged requirement?
gurus hope can advice me this newbie..thansk alot
regards
Wilsonhi there
the information i whould like to get is when i click the pegged requirement button in the MD04
are dare , requirements , requirements qty and etc..
all the infomation is inside PBIM..
i ' m no idea how to link the table from RESB tro PBIM.
hope by using planned order number i able to link to PBIM or other table similar to PBIM. -
What are the master data tables for 'Plant'?
Hi friends,
What are the master data tables for 'Plant' that contain below data?:
PLANT
NAME1
NAME2
LANGUAGE
HOUSE_NUM_STREET
PO_BOX
POSTAL_CODE
CITY
COUNTRY_KEY
REGION
COUNTRY_CODE
CITY_CODE
TIME_ZONE
TAX_JURISDICTION
FACTORY_CALENDAR
Thanks a lot!Hi,
Plz try out following tables for your requirement.
TOO1W
ADRC
J_1IMOCOMP
T001W : werks TYPE t001w-werks, "PLANT
name1 TYPE t001w-name1, "PLANT DESCRIPTION
adrnr TYPE t001w-adrnr, "PLANT ADDRESS NUMBER
ADRC: addrnumber TYPE adrc-addrnumber, "ADDRESS NUMBER
str_suppl1 TYPE adrc-str_suppl1, "STREET2
str_suppl2 TYPE adrc-str_suppl2, "STREET3
street TYPE adrc-street, "STREET
city1 TYPE adrc-city1, "CITY
post_code1 TYPE adrc-post_code1, "CITY POSTAL CODE
post_code2 TYPE adrc-post_code2, "PO Box postal code
tel_number TYPE adrc-tel_number, "TELEPHONE NUMBER
fax_number TYPE adrc-fax_number, "FAX NUMBER
str_suppl3 TYPE adrc-str_suppl3, "STREET4
location TYPE adrc-location, "STREET5
city2 TYPE adrc-city2,
For Tax Details :
J_1IMOCOMP : werks TYPE j_1imocomp-werks,
j_1icstno TYPE j_1imocomp-j_1icstno,
j_1ilstno TYPE j_1imocomp-j_1ilstno,
Hope this will help.
Regards,
Archana -
Hi All,
I am developing a report for pegged requirement, in that my requirement is ,
I want to display the component number , receipt number and its quantity
( Similar to the results that are displayed in MD04 ).
I am passing header component and then am exploding its Bill Of Material,
then for each component am getting its receipt number.
But am not getting the desired results as shown in MD04 transaction.
In MD04 transaction all data is getting displayed at runtime.
can you tell me how to proceed and how to get the exact receipt number for the component as that displayed in MD04.
Edited by: bharat tambat on Aug 22, 2008 3:27 PM
Plz help its urgentDear
If you are lloking for custom report then you should develope based on folllowing tabels :
1.RESB ,PBIM ,BAUGR(PEG.REQ.QTY) ,PLAUN(PL.ORD) ,AUFNR(PO), EBELN(PR)
Or you can try MD_STOCK_REQUIREMENT_API_list /MD_PEGGING_NODIALOG
For standrad SAP report you need to refer CO09/MD4C/COOIS/MD07
Hope this helps
Regards
JH -
How to desighn a table for below logic
Hi all,
Could any body help me , how to design a table for below requirements
Ticketing Status
Departure Date/Time
Domestic Point of Sale
International Point of Sale
Yes
Outside of 24 hours
Immediate
Immediate
Yes
Inside of 24 hours
Immediate
Immediate
No
Outside of 24 hours
24 hours after Project review or 20 hours prior to departure, whichever is earlier
72 hours after Projectreview or 20 hours prior to departure, whichever is earlier
No
Inside of 24 hours
4 hours after Projectreview or 4 hours before departure, whichever is earlier; Immediate if within 4 hours
4 hours after Projectreview or 4 hours before departure, whichever is earlier; Immediate if within 4 hoursCREATE TABLE [dbo].[POS_Table](
[POSID] [int] IDENTITY(1,1) NOT NULL,
[Ticketing Status] [varchar](3) NULL,
[Departure Type] [varchar](7) NULL,
[Departure DateTime Hr] [int] NULL,
[POSType] [varchar](15) NULL,
[POSAfterProject Review Hr] [int] NULL,
[PriorToDeparture Hr] [int] NULL,
[Immediate Hr] [int] NULL,
CONSTRAINT [PK_POS_Table] PRIMARY KEY CLUSTERED
[POSID] ASC
)WITH (PAD_INDEX = OFF, STATISTICS_NORECOMPUTE = OFF, IGNORE_DUP_KEY = OFF, ALLOW_ROW_LOCKS = ON, ALLOW_PAGE_LOCKS = ON) ON [PRIMARY]
) ON [PRIMARY]
The rows will look like as below,
POSID
Ticketing Status
Departure Type
Departure DateTime Hr
POSType
POSAfterProject Review Hr
PriorToDeparture Hr
Immediate Hr
1
Yes
Outside
24
Domestic
0
0
0
2
Yes
Inside
24
Domestic
0
0
0
3
Yes
Outside
24
International
0
0
0
4
Yes
Inside
24
International
0
0
0
5
No
Outside
24
Domestic
24
20
0
6
No
Outside
24
International
72
20
0
7
No
Inside
24
Domestic
4
4
4
8
No
Inside
24
International
4
4
4
Regards, RSingh -
Table/Field for the requirements plan number.
Hi,
I need the Table for requirement plan number (that I display in MD61)
Tablename and Fieldname.
ThanksPass the material and plant in PBIM and fetch the BDZEI- By using BDZEI and date (PDATU-PBED), fetch the (PLMNG- PBED )as planned qty, UOM as ( MEINS-PBED) and date (PDATU-PBED) system.
Maybe you are looking for
-
Frozen display when call is forward to voicemail IOS 8
After upgrading my iPhone 5s to ios 8 and 8.0.2,I forward incoming calls to my voicemail with a double click on sleep button and when I unlock my device the screen has been frozen, so I have to lock/unlock my iPhone to fix this issue,can anyone help
-
Able to connect to wifi but not internet.
I am able to connect to the wifi at work with my 3GS but I can't connect to the internet. There are SOME at work who are having the same problem (not all). My phone was able to browse yesterday and I've made no changes. I've tried resetting the Netwo
-
Hi there I have Centos 5.3 with Tomcat 6 and Apache 2.2 and I am using webmin and Virtualmin I setup mod_jk on my server and I got the web pages to load, i mean the pictures and the css are working but not any servlets including switching languages..
-
Guys, I've been trying to solve the shortest route problem and got stuck in calculating the cumulative distance in a hierarchial query. I've got some idea to deal with it like sum(distance) over (order by level rows level preceding)But in order for t
-
Does it exist a way to create a COM port based on a VXI serial port instrument
The goal is to be able to access a serial port located in a VXI instrument either through VISA ASRL device or through Windows API (createfile, writefile, readfile)functions