Tables for standard datasource - Fundas Management, Budget Control System
Hi Experts
There are 2 standard datasources 0PU_IS_PS_42 & 0PU_IS_PS_31 which are used bu our client which has all the budget information. i need to know the tables from where the data is populating.
Can anyone please give me the table names. Its urgent.
Thanks in Advance.
Edited by: Jasmine G on Jul 1, 2008 6:42 PM
Hi Experts
There are 2 standard datasources 0PU_IS_PS_42 & 0PU_IS_PS_31 which are used bu our client which has all the budget information. i need to know the tables from where the data is populating.
Can anyone please give me the table names. Its urgent.
Thanks in Advance.
Edited by: Jasmine G on Jul 1, 2008 6:42 PM
Similar Messages
-
Funds Management with Budget Control System (BCS) submodule
hi sap gurus
can any one give me the details for the
Funds Management with Budget Control System (BCS) submodule
if any material pls send to my mail id : [email protected]
its very urgent pls
thank youHi,
Try executing FMAVCREINIT report and check if the problem persists.
Regards,
Eli -
Use of Budget controll system in funds management module
Dear all,
Presenly we are using Former budgeting.Now we want to go for Budget controll system (BCS).Now our doubt is whether we have to convert the former budgeting to BCS.Or we have to go for fresh implementation of BCS. For your information we have not migrated to ECC6.0. Only technical upgradation of ECC6.0 is completed.Kindly advice.
Regd.
ShivajiHi, depends on your business requirements.
Do you want to use Addresses(means not 1 to 1), AVC, Revenues Increasing the Budget, Cover Eligibility, Consistency Check etc.
If former budget satisfied your bus. requirements , and you just need e.g. new account assignment(eg funded program), then may be there is no need for new implementation, just some correction -
Funds Management Budgets and Hierarchies
Hi Folks
We use funds management budgets in our R3 system and import them into an FM cube using 0FI_FM_1. When I run reports including budgets the Hierarchy for Funds Centre cumulates values in subordinate nodes. The problem is that the extractor brings in the budgets at each level as a result of the way the budget is stored in R/3. Previously I knew the lowest level that budgets were stored at and targeted just that data but now the budgets may be stored at varying levels.
I either need to build an DataSource on R3 that provides the "Distributable" budget at whatever level it is stored or do I make the Key figure non cumulative.
Anyone had an similar experiences or solutions with hierarchieshi
Eli Klovski
how to use this budget period in FM
I had read help
http://help.sap.com/erp2005_ehp_04/helpdata/en/03/f1968109244986b0c3719d2670af08/content
but that when i to define new ledget but no total table PSGLFLEXT can use (Had Activate PSM-GEN-BUDEGT_period 1 and 2)
and if i want to define 12 AVC ,but how to control on month?
can you help me ? -
SRM 7.0 for Public Sector integrated with FM (Budget Control System)
Hello!
I'm starting an implementation project of ERP 6.0 and SRM 7.0 for Public Sector.
It would be necesary the integration not only SRM with ERP but with FM (Fund Management), with BCS (Budget Control System) specifically.
Is it possible? has anyone experience on it?
Thks so much in advance and best regards!
Marcela.-Hi,
Certainly... If you have FM implemented in your project, you will have to make integration with SRM.
I did it some 3 years ago and it was quite problematic (a lot of notes were created by SAP on this matter, also as initiative from our project), but since then, I assume, it should not pose specific problems.
Regards,
Eli -
Funds Management-Budget Carry Forward
Hi,
I was doing testing for open item commitment carry forward along with Budget (FMJ2). In the selection screen, there is a drop down for Availability Control, When I Select Check and execute..
1) I get errror message.. Budget "Annual Budget Exceeded by ......" . This message shld not appear as budget from CY is to be transffered to New Year.
2) Then I executed FMJ2 again but this time I in Availability Control.. I selected Update without check.. this time there was no error and I could post it. But here the problem is when i see the report for Year 2009 (new year)FMRP_RW_BUDCON - Budget Control System (BCS) -> Budget -> Overview of Budget Consumption , Consumable bugdet is 0, Current bugdet has value carried forward, available budget is in negative.
I have release strategy for budget, but not for budget type carried forward.
What could be the problem...How shld I solve this???
Thanks & Regards,
JyotiHi ELi,
I have checked the table BUVALTPRO, automatic release is checked for carry forward process.
Why I m not using release for this:
1) IN FMJ2, I would like to choose Availaibility control as check, if I do this i'll get error message as release is done after I do carry forward.
2) Budget is already released for open items in old year, so it would not make sense to release it again.
3) Now, I have activated consistency check for Negative budget, so when I execute FMJ2, it does not allow me post even if I choose update wihout check and I get the message : "The current budget for budget type CFWD is negative"
Does it has anything to do with
IMG/PSM/FM Govt/Closing Operations/Closing operation for BCS/Set Up Automatic Budget Postings After Fiscal Year Change -
what's d use of this?
Thanks & Regards,
Jyoti -
Funds Management - Budget Posting
Hi experts,
I set up a fund management scenario with SAP CRM 6.0, then I'm trying to test it on WEB UI but I'm facing an issue which I'm not able to solve.
The issue regards the Budget Posting functionality, specifically everytime I try to transfer budget from one fund to another the system gives me the following error: "Budget Consumption is 100.00 percent of total available budget (check level FU_FND)".
In the error details the sistem tell me that the budget consumption/total available budget ratio is over the defined tolerance limits. Please adjust your posting amounts.
Of course I tried to do it with the lowest amount but it doesn't work.
Then, I guess I did a mistake during the configuration.
Anyone who can help me working this problem out?
Thanks a lot!
RegardsHi Gabriele,
the msg is raised as per the availability control set up - please check the following customizing:
Customer Relationship Management
Funds Management
Availability Control (AVC)
There please check the AVC profile assigned and the tolerance profiles.
best regards,
johannes -
T.Code for Configuration Menu "Funds Management Government"
Hello,
Do we have a T.Code for SPRO node "Funds Management Government". I found T.Code TCMN for Easy access menu but not for FM Config items.
Thanks,
AnkishHi,
There is an old area menu OFTC, but it does not stand for BCS. As far as I know, there is no FM configuration special menu area.
Regards,
Eli -
Function Module/Table to retrieve check table for standard fields
Hi,
Is there any function module or database table that holds the check table for standard field? Ex. BUKRS = T001.Hi MArc,
Goto DD03L table
Enter fieldname and tablename, you will get check table in CHECKTABLE field.
e.g. fname - MATNR, tbname MARD then CHECKTABLE - MARA
Reg,
Sachin -
Hi,
I want active Budgeting Control system in SAP. Please let me know how I can activate, from first step to last step. Please help me.
Thanks & Regards,
Hemant MauryaHi,
For activating Budgeting
In OKKP activate the Order management active for the budgeting in orders
Commitment mangement active for the commit manaement active.
Activate which all the area you want budgeting,Ex Projects,Sales order,costing object.
Define Budget profile in OKOB.
IN KOAB maintain the assignmnet of budget profile to order types.
IN KOAO activate the commit management check box against the order types.
Define the tolerance limit for the budgeting.
Maintain number range in OK11.
Now create any internal order & assign budget in KO22 transaction,check the same.
Regards,
Raj. -
Funds management and project system
hi fico experts
i am new to the fund management and project system
but my client implementing both funds management and project system
can u pls send me the related documents and configuration steps and tables
it is very urgent send me as early as possible
regards
venkataswamyhi
for Project systems
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/MYSAP/SR_PS.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/CAARCPS/CAARCPS.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/PS/PS.pdf
funds management
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/FIFM/FIFM.pdf
nagesh -
Manual Budget Planning with Budget Control System
Hi Friends,
The below scenario i have found in Periodic/Closing Operations:
What is the purpose of Manual Budget Planning with Budget Control System
Can anybody provide the link or document with configuration for above scenario
Thanks
Venkat
Edited by: venkata raju khottari on Feb 14, 2009 2:52 PMDear venkata raju khottari,
Budget control is one part of Project System. Normally we have two types of Budgets one Budget for CAPEX and Budget for Over Head expnes. Max companies PS will take care by the Budgets. If u need any information let me know.
thanqu
raj -
Hi Experts,
We are using ECC6, but would like to know if there is an available transaction code or program in the system that can provide for preventive budgeting control system where the accounts are validated on-line with the available balance
Thanks.Hi Ajay,
We are uploading the budget in 7KEX per GL account per profit / cost center
Thanks. -
Budget and budget control system
what is the differnce between budget and budget control system. is it possible in sap each po (purchase order) wise budget.if its possible in sap please provide config steps.
Hi, guy
In SAP, we can use IO, PS, FM to make the budget. The budget control system is a sub-module of FM. If you want to get some config step, please kindly refer SAP Best Practises. -
Fund Managment - Availability Control
Hi! all experts,
I have come across the following Fund Management problem :
If there is NO budget data for a commitment item in this financial
year, Purchase Order can be saved against that commitment item even
thou Fund Checking has turned on. There is NO ERROR MESSAGE. That's is
WRONG.
Once entered budget data of $1.0 via FR04 to that commitment item, on
saving the Purchase Order, system will display an error message :
Availability Control : Item 001 B2010 / 163000 payment budget exceeded.
How can this problem be fixed so that SAP will display an error message if there is NO BUDGET for a commitment item.
THANKS IN ADVANCE.Hi! Sridhar,
For temporary fix, I have created a $1.0 budget for each commitment item.
Do you have any idea what's ran wrong? In last Financial Year, we don't have that problem.
Maybe you are looking for
-
Printing from a Mac Book Pro to a Windows 7 64 Bit Box
Before I upgraded to Win 7 I have no problem printing from my MBP (snow leopard) to my Canon IP4300 hooked up to my Vista Ultimate Box. Once I upgraded it to Win 7, I can no longer print. We have 2 Mac Book Pro's and this error can be duplicated on b
-
Description of field from data element in table control
hello people !!! I need help !! Im using a table control in my module pool program. I create this table through wizard, taking the fields from an internal table. This internal table was defined like this: Table Control ; posting items DATA: t_postit
-
New 21 inch iMac with mic white noise
Internal mic creates white noise when speaking on Face Time, Skype, or iChat. It is resolved if I plug in my iPhone headphones. I tried a PRAM reset and moving the computer location in case there was a problem with grounding, but to no avail. Any s
-
Shall we use SRDemo Framework Extension Classes in 11G R1?
Hi, I just installed 11G R1 and reading developer guides. For development with 10.1.3.3 release I was using the Framework extension classes from SRDemo to base BC's on. Those methods includes many base functionality such as setManagerowsByKey, case-i
-
Warehouse table in sync with OLTP table
I have a quick question, I have a table called orders and and also another table called orders_warehouse. We warehouse every day's data from orders to orders_warehouse. Question is when we add a new column to orders table is there a magic way to add