Tables for Target Group

Dear experts,
I have been looking for the table that stores the target group.
Could anyone please help?
thanks
Mehmet

CRMD_MKTTG_TG_H & CRMD_MKTTG_TG_T

Similar Messages

Tables for Target costs

Hello All,
Can anyone please tell me the tables for target costs in controlling.
Thank you
Nivas

No answer received

Changing archived status for target group or segmentation model.

Hello, CRMies!
In SAP CRm WEBUI i set "To archive" flag for segmentation model and now it has status "Archived". The problem is hat it became inactive now and i can't reset this status. I didn't execute any archiving reports, just set the flag on. I was looking for any FM or reports to recover the status.
Anybody knows how to unarchive segmentation model or TG?

Hi Katya,
as far I know the segmentation model is archived with the next scheduled archive run once the status 'to be archived' is set. The status can be undone before the archive run, once this is archived there is no way other then generating the segment again.
Please refer to the online help about further information:
Archiving Segmentation Elements - SAP Library
For target groups andproduct segments there is also a read program in transaction SARA, which you can use to display the archived segmentation elements again at a later point in time, if required.
Furthermore, the information structure SAP_CRM_MKTTG_I is available for target groups and product segments in the transaction SARA.
You can not only read, but can also load archived segmentation models into the system. However, you should only use this function when it is absolutely necessary. For further information, see Reloading Archive.
Since you cannot load target groups or product segments into the system, you need to generate these again to be able to use them.
I hope this helps.
best regards,
Johannes

Personalization (Cross-Selling Rules for Target Group) in E-commerce

Hi,
Could any one suggest solution for the query...
Scenario: Personalized Cross-Selling for Target Group in a Webshop (E-Commerce-B2B Occasional User Scenario). The Cross Selling is to
appear only for Target Group, but the system is prompting the Cross Selling
Rule for both Target Group aswell Global. The Config details are below
mentioned.
1. In Method Schema (11) we maintained Cross Selling Methods for Global as well
as Target Group.
(CRM_MKTPR_PP_CS_GL_READ & CRM_MKTPR_PP_CS_TG_READ).
(I did remove Global Method for testing, but still it is appearing for Global
Target Group)
2. Created Cross Selling rules in CRM for Target Group Target Group & is
Activated.
3. Target Group Modeling done in Segment Builder.
4. Target Group Assignment done in the webshop.
5. Application Administration related tasks (clearing done).
6. Product Catalog Updated Replication is done aswell.
7. Simulation of Product Proposal is done using program
"CRM_MKTPR_PRODUCT_PROPOSAL"
Please suggest me if I miss anything to recommed Cross-Selling rules only to the Target Group.
Thanks in Advance,
D u r g a r a o

Cartweaver
http://www.cartweaver.com/
Web Assist Power Store
http://www.webassist.com/support/ecommerce-options.php
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
http://alt-web.com/
http://twitter.com/altweb

Crm tables for sales group and sales office

Hello CRM Experts,
Can any one plz. help me to find Tables for Sales Group and Sales office.
It will be really helpful if the above fields have relation to the Business Partner.
Thanks in Advance,
Regards,
Bharat.

Hi Radek,
I feel the table which you have given is the right table but in my scenario we have created sales office and sales group(in org structure) independently in CRM, so now we need to find these values from the table independently as well as with relation to BP the table which you have provided can be used for second scenario but if we want to fetch the values of all sales office and sales group which table i have to use.
One more problem for second scenario is in BP we cant able to see the sales ofice & group values which we defined in CRM, if we can save BP with sales office and group values then only we can use the table which you have given
Highly appreciable for your replies.
Thanks,
Bharat.

Create Tasks for target group.

Hi guys.
I want craete Tasks for target group.
But, I don`t see "Employee Responsible" in "Create Business Transactions for Target Group Members".
How can I set Employee Responsible for Tasks?
Thanks.
Sergey.

Hi Sergey,
What i observed while creating Task from TG is we dont have fileds from where we can assign Emp responsible, as in Task Partner detemination(Standard) Access sequence we use for Emp responsible is User, and when we create Task from TG sytem takes User's Id as a Emp reponsible i.e. using which user u r creating Task from TG.
Regards,
DD's

Retreiving the guid for target group selected for trade promotion in CRM 7

HI,
I am working on building API for creating trade promotion. I need to find a way where I could retreive the GUID of the target group to be assigned to the trade promotion.
Please share you thoughts on this. Let me know if we could use any standard function module or SAP class which could be used to achieve the objective.
Awaiting your replies.
Thanks

Check this function module
CRM_MKTTG_TG_H_GETLIST_OW

Table for Type Groups (DDIC)

Hi,
I´m searching for the database table the Type Groups are stored in.
(SE11 -> Type Group)
From table TADIR I´m getting the owner and the dev. class.
From table DDTYPET I´m getting the short text.
But where I can find "Last changed on/by"? (SE11 -> Type Group -> Atttributes)
Cheers,
André

Use this function module TYPD_GET_OBJECT to get the last changed by user
PTRDIR exporting parameter contains the values
column - UNAM - Last changed by
UDAT - Last changed time
you can get all the details from this parameter(PTRDIR).

Table for finding GROUP or WEBGROUP

Experts, does anybody know where can I find GROUP/WEBGROUP name in the database. Is there any OOTB table provided by OBIEE. My group information is coming from Siebel.I want to know where is the group information present in OBIEE datamart?
thx,
parag

Hi,
Check the below link-
http://obieeblog.wordpress.com/2009/06/18/obiee-security-enforcement-%e2%80%93-external-database-table-authorization/
You can see that GROUP is assigned from some table used for authorization. Similarily you too might have tables used to assign the variable.
Refer-
http://www.rittmanmead.com/2012/03/obiee-11g-security-week-connecting-to-active-directory-and-obtaining-group-membership-from-database-tables/
Hope this helped/ answered
Regards
MuRam

Creation of Target group.

Hi All,
I having one urgent requirement, we have maintained the Ztable for maintaning the information of Vehicles against Business partners.
The Fields in the said Ztables are Vehicle type, vehicle Reg Number and BP number.
I want to send the mails using target group to customer who is having Perticular vehicle type for that i have created Infoset using the Ztable, then i have created the data source for target group still i m not getting the desired result !!!!!!
please anybody tell me that i missing any of step for above requirement ???
how to link up the BP to Ztables fields ???
How to create the said Target group ???
Regards,
Dipesh

Hi,
You can try this alternative solution:-
Instead of maintaining vehicle type etc in Z table, please crate it as "attribute", and assign it to Business Partners.
You can use CRMD_PROF_BP transaction to assign Attributes to Business partners.
Based on the attributes , you can subsequently create the "target group".
Regards,
PD
Pl. Reward points if it helps !!

Campaign Details from Target Group

Hi All,
I have a requirement, in which from the GUID of the Target Group, i need to fetch the details of the Campaigns in which it is assigned (There will be multiple assignement).
I found two Tables for this:
1. CRMD_MKTPL_TGGRP : Field: TARGETGRP_GUID
2. CRMD_MKTTG_TG_H : Fields: SET_H_GUID, SET_GUID, PROF_GUID
My logic was to join these table for getting the Campaign for each Target Group, but unfortunately i didnt find any common data in between the field TARGETGRP_GUID of CRMD_MKTPL_TGGRP and above stated 3 fields of the CRMD_MKTTG_TG_H.
is there any FM available for getting the Campaign details from the Target Group?
Please share your comments.
Regards
Dave

Hi Dave,
Did you try to use the dynamic query SEGTgAdvQuery?
this is a Dynamic query that searches for Target Groups. The result BOL Object contains a relation SEGTgTgCampaignRel that contains all Marketing Campaigns for that Target Group.
here is how you could call the dynamic query.
data:         lr_query_service          TYPE REF TO cl_crm_bol_dquery_service,
        lr_selection_param        TYPE REF TO if_bol_selection_param,
        lr_selection_param_buil   TYPE REF TO if_bol_selection_param,
        lr_tg              TYPE REF TO cl_crm_bol_entity,
        lr_mkt           TYPE REF TO if_bol_entity_col,
        lr_query_result           TYPE REF TO if_bol_entity_col,
      lr_query_service = cl_crm_bol_dquery_service=>get_instance( 'SEGTgAdvQuery' ).
      IF lr_query_service IS BOUND.
        CALL METHOD lr_query_service->insert_selection_param
          EXPORTING
            iv_index           = 1
            iv_attr_name       = 'ID'
            iv_sign            = 'I'
            iv_option          = 'EQ'
            iv_low             = '12345'      "This is your Target Group ID
          RECEIVING
            rv_selection_param = lr_selection_param_buil.
        lr_query_result = lr_query_service->get_query_result( ).
        lr_tg ?= lr_query_result->if_bol_bo_col~get_first( ) .
        IF lr_tg IS NOT INITIAL.
          lr_mkt ?= lr_tg->get_related_entities( 'SEGTgTgCampaignRel' ).
NOW YOU HAVE THE LIST OF MKT CAMPAIGNS...
        ENDIF.
     ENDIF.
hope this helps.
Kind regards,
Micha

Can't create target group in graphical modeler

Hi,
I have a problem with the target group creation.
To create the target group I have done the following steps:
1. Go to Marketing -> segment;
2. Create Profile Set; save.
3. Go to Graphical Modeler;
4. Drag&Drop the attributes to the work area;
5. Select Count;
6. Select Build target group -> In Dialog;
7. Save target group;
8. Select u201CBacku201D to go to the Profile Set;
The system doesnu2019t do any error, but when I go to the profile set, in the block Target Groups doesnu2019t appear the target group that I have created.
If i go to the CRMD_MKTTG_TG_T CRM table, my target group is not create.
Can anyone help me, please.
Regards,
Brahmaji

HI
in gui u have to create target group in tcode crmd_mktseg create profile create target group and copy attribute list of existingif needed create filters and go for web ui create profile set and go for graphical modler and take ur attribute list and drag and drop u can split or rejoin merge target groups i think it is use full
abhinav

Page break for a group and sub group based on page length

Hi
I have a requirement where in I need to develop a report which has the following requirement. I am attaching the sample xml and rtf files for reference:
1) There are 3 groups in the Data Model. G1, G2 and G3. G1 contains G2 and G2 contains G3. I need to display that data in that order in the rtf template. Pretty straight forward.
2) The tricky part, however, is that the report needs to have a page break on the following conditions:
a) When the value of col1 changes which is in G1
b) On col3 (in G2), but only when there is not enough space on the page to accommodate the values present in G3, ie col5 and col6 alongwith the values in G2. This means when the value of col3, which is present in G2, changes and if there is not enough space to accommodate G2 and G3 on the same page, it should break and start on a new page. The table which should come together is marked in grey color in the RTF template.
What I have done till now to achieve this?
I have created a parent table with two rows. In the second row I have made sure that the row doesn't break across pages. This is true for all the subsequent tables in the report. Now, in that second row, I have col1 in a nested table within a repeating group G1. Inside G1 there is a nested table for G2 and within G2 I have another table for the group G3. The row is not breaking across pages for all the tables that have been created.
I have tried all the permutations and combinations of nested tables, keeping G1, G2 and G3 in the same table but different rows, having G1 in one table and nesting G2 and G3 in another, keeping G2 and G3 in a separate table altogether, Keeping G1, G2 and G3 all of them in the separate table. All of them are apparently not working.
Is there anyway where we can either get hold of the current position of the cursor and the total number of rows on that page? Or any other solution that is possible? Or if I can have to make changes in the data model?
Thanks a lot in advance
Sid

Hello Sid,
I have checked your report and XML Sample and you haven't linked the fields from XML Sample to your .rtf report.
You can use <?for-each?> syntax for your groups to print the content.
I recommend you to review our "Creating RTF templates" manual:
http://docs.oracle.com/cd/E28280_01/bi.1111/e22254/create_rtf_tmpl.htm#BIPRD2354
Regards,
Liviu

Creation of Campaign Id and assign Target Group to it.

Hi all,
I am facing a problem in creating a Campaign Id. This is the first time i am working on CRM Marketing Campaign, and i dont know the process of creating a Campaign id for a Target Group created for BP's. Please do help me in providing me any program or link where i can find the sample programs for creation of campaign id, Campaign Element, Profile Set, Target Group, Assigning BP's to Target Group.. I am presently using the below mentioned function modules/BAPI's for creation of Profile Set, Target Group etc.,
For Profile Set Creation:                                         BAPI_PROFILESET_CREATE
For Target Group Creation:                                    BAPI_TARGETGROUP_CREATE
For Assigning Target Group to Campaign:             MKTPL_TGGR_ASSIGN_CREATE
for Campaign Element:                                            MKT_ELEMENT_CREATE
Please provide me complete program to explain the above.
Thanks in Advance,
Nagesh Thanneeru.

hi,
Target group is a group of BP, like a BP list. It's a kind of master data which can be used in business transaction.
And profile set is a base of target group, just like Product Hierachy and Product category. Each target group should belong to a profile set. So create the profile set, before you create target group.
Campaign is a kind of Marketing element of CRM Marketing. In campaign, it need the BP or BP group or Target Group as its campaign objectives. Just like Customer of Sales Order, Vendor of Purchase order.
Campaign can be assigned several target groups or BP or BP groups in it.
So if you want to create campaign and assign target group to it, the steps is:
1. create a profile set by BAPI_PROFILESET_CREATE
2. create target group by BAPI_TARGETGROUP_CREATE, in this calling, you will use the profile set created before.
3. create campaign by MKT_ELEMENT_CREATE
4. assign the target group to your campaign, by MKTPL_TGGR_ASSIGN_CREATEl, the target group comes from step 2, the campaign comes from step 3

Export target group by using mail form?

Hi Gurus,
we have a requirements to export the target group to a file but with the attributes we defined in Mailform. If I chose the export to a file then I need to enhance a BADI to define all these attributes again.
Is it possible to export target group to a file by leverage the mail forms?
We are working on CRM7.0
Thanks,
Wu

Hi Hongfa,
Export target group to file
You use this function to export the business partner data for target group members to a file, so that you can process this data further at a later date, or simply for storage purposes.
You can choose which business partner fields the export file will contain. You use the BAdI CRM_MKTTG_SEG_MEM_EX to define the fields you require.
The name of the file you create is freely definable. The file name you specify is saved in the logical file path MARKETING_FILES, which you define in Customizing (see Prerequisites). The data is written to two files: a data file that contains the actual data, and a meta file that contains the description of the data (for example, field types and field descriptions). In the standard system, MARKETING_FILES refers to the DIR_GLOBAL directory (transaction AL11). There is no restriction on the number of business partners.
Thanks & Regards,
Srini

Tables for Target Group

Similar Messages

Maybe you are looking for