Tables for vendor payments
Hi,
Are there any tables available in SAP for vendor payments.
I know some tables PAYR,REGUH,REGUP ETC.
But these are for after the printingof check is happened.
I want the table for manual payment,residual payment,advance payment etc.
Vendor invoices and cleared items will be stored in BSIK,BSAK,as well as these will be stored in BKPF,BSEK also.
In such a way vendor payments are all so stored in any other tables apart from BKPF,BSEG.
Kindly Reply......
Thanks in Advance
Radhika
When you raise a vendor invoice then it will be captured in BSIK, and as the payment takes place the value in BSIK will be cleared and the value appears in BASK. If the invoice is cleared or say the payment happened for the invoice then the cleared item will be captured in BSAK (Payment), there is no other table apart from these that capture the payment.
Just tell you requirement clearly.
Similar Messages
-
Payment condition table for vendor
Hi,
where I can find payment condition tables for vendors ?
Regardshi
There is no such thing as you have asked, but if it is terms of payment related just check the below
link.[Re: Table for Payment Terms]
Regards
Edited by: samuel mendis on Jun 8, 2010 3:11 PM -
Calculate due date for vendor payment
hi friends,
In my project i need to calculate the due date for vendor payment.as my client maintain different payment terms for different vendors am not able to pick the payment key from t052 table and calculate the due date.
do anyone have a solution for this......
prajithHi
You can insert Payment terms in Vendor master and also you can change or assign payment term while making transaction.
But first of all you should have payment term.
IMG -- Financial Accounting -- Accounts Receivable and Accounts Payable -- Outgoing Invoices/Credit Memos -- Maintain Terms of Payments
Regards,
Amit -
Tables for vendor invoice no, date, amount, tds, deduction
Hi experts, i m new to implementation. i m now doing report for vendor payment voucher.
as per per the payment voucher no and date, in item data i want the tables stores the vendor invoice no, date, po no after MIGO & MIRO, bill amount, tds, deduction (debit note, advance etc).
regards
thanks in advance.hi,
LFA1
LFAS
LFAT.
These tables is not useful for now for Report of Vendor payment voucher.
In header data, i want pament voucher no, date, vendor no, name(i got in table-field REGUP-VBLNR, regup-bldat, regup-lifnr & lfa1-name1) .
now i want in item data vendor invoice no, date, GR no, date, invoice amount, tds amt, deduction amt (separately like advance amt, debit note etc).
till now i found invoice no, inv amt (table-field BSIK-BELNR, BSIK-DMBTR).
Now i need GR no, GR date, tds amt, deduction details amt.
Plz send with table-field names, and how to relate with above.
regards,
debendra -
Wht r the standard tables for vendor customer and sales order report/
Hi wht r the standard tables for vendor and customer reports and is how in normal we cannot use them for vendor reporting and etc ?
Hi
Customer is related to Sales Module
So for a customer we fetch the reports of Sales orders , Deliveries and Billing doc's
CUstomer and Vendor related tables with important fields:
KNA1: Customer Master-General(KUNNR,NAME1,LAND1)
KNB1: Customer Master(Company Code)(KUNNR,BUKRS,PERNR)
KNC1: Customer Master Data (Transaction Figures)(KUNNR,BUKRS,GJAHR)
KNVK: Customer Master Contact Partner(PARNR,KUNNR,NAME1)
KNVV: Customer Master sales data(KUNNR,VKORG,VTWEG,KDGRP)
KNBK: Customer Bank Details(KUNNR,BANKS,BANKL,BANKN)
KNVH: Customer Hierarchy (HITYP,KUNNR,VKORG,VTWEG,SPART)
KNVP: Customer Master Partner Functions(KUNNR,PARVW,KUNN2)
KNVS: Customer Shipment data(KUNNR,VSTEL,TRANS)
KNVI: Customer Tax data(KUNNR,ALAND,TATYP)
LFA1: Vendor Master-General (LIFNR,NAME1,ORT01)
LFB1: Vendor Master(Company Code)(LIFNR,BUKRS,PERNR)
LFC1: Vendor Master (Transaction Figures)(LIFNR,BUKRS,GJAHR)
Sales related Tables for a customer
VBAK: Sales Document(Header Data) (VBELN, KUNNR)
VBAP: Sales Document(Item Data) (VBELN,POSNR,MATNR,ARKTX,CHARG)
Enquiry, Quotation, Sales Order are differentiated based on Doc.
Type(VBTYP field) in VBAK,VBAP Tables( for Enquiry VBTYP = A,
for Quotation 'B' & for Order it is 'C'.)
LIKP: Delivery Table (Header Data)(VBELN,LFART,KUNNR,WADAT,INCO1)
LIPS: Delivery Table (Item Data)(VBELN,POSNR,WERKS,LGORT,MATNR,VGBEL)
(LIPS-VGBEL = VBAK-VBELN, LIPS-VGPOS = VBAP-POSNR)
VTTK: Shipment Table (Header Data)(TKNUM)
VTTP: Shipment Table (Item Data)( TKNUM,TPNUM,VBELN)
(VTTP-VBELN = LIKP-VBELN)
VTFA: Shipping Document Flow(TKNUM,VBELV,VBELN)
VTPA: Shipping Partners data(VBELN,PARVW,KUNNR,PERNR)
VTTS: Stages in Shipment(TKNUM,TSNUM,TSTYP)
VTSP: Transport Stage/Shipment Item Allocation(TKNUM,TSNUM,TPNUM)
VEKP: Handling Unit: Header(Packing)(VENUM,VSTEL)
VEPO: Handling Unit: Item (Packing)(VENUM,VEPOS,VBELN)
VBRK: Billing Table(Header Data)(VBELN,FKART,BELNR)
VBRP: Billing Table(Item Data)(VBELN,POSNR,FKIMG,NETWR,VGBEL,VGPOS)
(VBRP-AUBEL = VBAK-VBELN, VBRP-VGBEL = LIKP-VBELN)
Apart from these tables there are lot of other tables which starts with
V, but we use the following tables frequently.
VBUK: All Sales Documents status & Admn. Data(Header)(VBELN,VBTYP)
VBTYP= C(Sales Order) VBTYP=J(Delivery) VBTYP=M(Invoice)
VBUP: Sales Documents status & Admn. Data(Item)(VBELN,POSNR)
VBEP: Sales Doc. Schedule Lines Data(VBELN,POSNR,EDATU,WMENG)
VBKD: To get sales related Business data like Payment terms etc.(VBELN,ZTERM)
VBFA: sales document flow data(VBELV,VBELN,POSNV,VBTYP)
VBPA: Partner functions Data(VBELN,PARVW,KUNNR,LIFNR)
VEDA: Contract Data(VBELN,VPOSN)
VEDAPO: Contract Data(VBELN,VPOSN)
Vendor related MM tables
EBAN-- Pur.Reqn. Data (BANFN,BNFPO,BADAT,MATNR)
EBKN-- Purchase Requisition Account Assignment(BANFN,BNFPO,VBELN)
EINA- Purchase Info.Record (General Data)(INFNR,MATNR,LIFNR)
EINE-- Purchase Info.Record (Pur.Orgn Data )(INFNR,EKORG)
ELBK-- Vendor Evaluation Header Data(LIFNR,EKORG,KLASS)
EKKO-- Purchase Order Data (Header)(EBELN,BSTYP,BSART)
EKPO-- Purchase Order Data (Item)(EBELN,EBELP,MATNR)
RFQ and PO are differentiated by Doc Type(BSTYP)in EKKO table.
For RFQ it is A and for PO it is F.
MKPF-- GRN Data (Header) (EBELN,BLDAT,BUDAT,XBLNR,BKTXT)
MSEG-- GRN Data (Item)(MBLNR,BWART,LIFNR,MATNR,EBELN)
Apart from this there are lot of tables which begin with 'M'& 'E', but we
use the following very often.
EKBE--PO History Data (EBELN,EBELP,BELNR,BLDAT,MATNR,VGABE)
EKBZ--PO History with delivery Costs(EBELN,BELNR,LIFNR,XBLNR)
EKET--Schedule lines data of a PO (EBELN,EINDT,SLFDT)
EKES--Vendor Confirmations Data(EBELN,EBTYP,EINDT,XBLNR)
Reward points if useful
Regards
Anji -
Hi, I want to know that standard tables for vendor analasys report and sale
Hi, I want to know that standard reports for vendor analasys report and sale order and customer order report...? why most probably we use tables and fetch the fields rather than standard reports >
Hi
This is the sample report for vendor aging:
Std reports Tcodes are:
customer : s_alr_87012178
vendor : s_alr_87012084
Custom designed:
REPORT zfi_customer_ageing
NO STANDARD PAGE HEADING
LINE-COUNT 58
line-size 168
MESSAGE-ID zh_msg.
D A T A B A S E T A B L E S D E C L A R A T I O N
TABLES: kna1, " Customer Master (General)
t001, " Company Codes
rfpdo.
I N T E R N A L T A B L E S D E C L A R A T I O N S *
Internal Table for Customer Open Items Data
DATA: BEGIN OF int_bsid OCCURS 0,
kunnr LIKE bsid-kunnr, " Customer Number
name1 LIKE kna1-name1, " Customer Name
shkzg LIKE bsid-shkzg, " Dr/Cr Indicator
belnr LIKE bsid-belnr, " Document Number
xblnr LIKE bsid-xblnr, " Ref Doc No
blart LIKE bsid-blart, " Document Type
zfbdt LIKE bsid-zfbdt, " Base Line Date
zbd1t LIKE bsid-zbd1t, " Due date1
zbd2t LIKE bsid-zbd2t, " Due Date2
zbd3t LIKE bsid-zbd3t, " Due Date3
waers LIKE bsid-waers, " Currency
dmbtr LIKE bsid-dmbtr, " Amount in Local Curr
END OF int_bsid.
Internal Table for Amounts Sum Up Data
DATA: BEGIN OF int_final OCCURS 0,
kunnr LIKE bsid-kunnr, " Customer Number
name1 LIKE kna1-name1, " Customer Name
total1 LIKE bsid-dmbtr, " Amount in Local Curr
total2 LIKE bsid-dmbtr, " Amount in Local Curr
total3 LIKE bsid-dmbtr, " Amount in Local Curr
total4 LIKE bsid-dmbtr, " Amount in Local Curr
total5 LIKE bsid-dmbtr, " Amount in Local Curr
total6 LIKE bsid-dmbtr, " Amount in Local Curr
total LIKE bsid-dmbtr, " Amount in Local Curr
END OF int_final.
D A T A D E C L A R A T I O N S
DATA : v_flag, " Flag
v_gtotal1 LIKE bsid-dmbtr, " Amount Totals
v_gtotal2 LIKE bsid-dmbtr, " Amount Totals
v_gtotal3 LIKE bsid-dmbtr, " Amount Totals
v_gtotal4 LIKE bsid-dmbtr, " Amount Totals
v_gtotal5 LIKE bsid-dmbtr, " Amount Totals
v_gtotal6 LIKE bsid-dmbtr, " Amount Totals
v_gtotal LIKE bsid-dmbtr, " Amount Totals
v_subtotal1 LIKE bsid-dmbtr, " Amount Totals
v_subtotal2 LIKE bsid-dmbtr, " Amount Totals
v_subtotal3 LIKE bsid-dmbtr, " Amount Totals
v_subtotal4 LIKE bsid-dmbtr, " Amount Totals
v_subtotal5 LIKE bsid-dmbtr, " Amount Totals
v_subtotal6 LIKE bsid-dmbtr, " Amount Totals
v_subtotal LIKE bsid-dmbtr, " Amount Totals
v_date LIKE bsid-zfbdt, " Due Date
v_tage1(4), " Age 30 days
v_tage2(4), " Age 60 days
v_tage3(4), " Age 90 days
v_fir(15), " Column Text1
v_sec(15), " Column Text2
v_thir(15), " Column Text3
v_four(17), " Column Text4
v_fidd(4), " Days field1
v_sedd(4), " Days field2
v_thdd(4), " Days field3
v_fodd(4), " Days field4
v_str TYPE SY-LISEL, " String
v_str1(11), " String
v_tage(3), " String
v_date1(10). " Date field
R A N G E D E C L A R A T I O N S
RANGES: r_date1 FOR bsid-zfbdt, " Date Range 1
r_date2 FOR bsid-zfbdt, " Date Range 2
r_date3 FOR bsid-zfbdt, " Date Range 3
r_date4 FOR bsid-zfbdt. " Date Range 4
S E L E C T I O N S C R E E N *
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-001.
SELECT-OPTIONS: s_kunnr FOR kna1-kunnr. "Customer account
PARAMETERS: p_bukrs LIKE t001-bukrs. "Co. Code
SELECTION-SCREEN END OF BLOCK b1.
SELECTION-SCREEN BEGIN OF BLOCK b2 WITH FRAME TITLE text-002.
PARAMETERS: p_allgst LIKE rfpdo-allgstid OBLIGATORY DEFAULT sy-datum.
"Open items at key date
SELECTION-SCREEN END OF BLOCK b2.
SELECTION-SCREEN BEGIN OF BLOCK b3 WITH FRAME TITLE text-003.
PARAMETERS: p_tage1 LIKE rfpdo1-allgfael DEFAULT '30',
p_tage2 LIKE rfpdo1-allgfael DEFAULT '60',
p_tage3 LIKE rfpdo1-allgfael DEFAULT '90',
p_tage4 LIKE rfpdo1-allgfael DEFAULT '120'.
SELECTION-SCREEN END OF BLOCK b3.
A T S E L E C T I O N S C R E E N *
AT SELECTION-SCREEN.
Validate the screen fields
PERFORM validate_flds.
S T A R T O F S E L E C T I O N *
START-OF-SELECTION.
Fetch main data
PERFORM fetch_data.
T O P O F P A G E
Header
TOP-OF-PAGE.
PERFORM header.
E N D O F P A G E
Footer
END-OF-PAGE.
ULINE.
T O P O F P A G E D U R I N G L I N E S E L E C T I O N *
Top of Page in Secondary List
TOP-OF-PAGE DURING LINE-SELECTION.
PERFORM header1.
A T L I N E S E L E C T I O N *
AT LINE-SELECTION.
Perform Line Selections
PERFORM line_selection.
E N D O F S E L E C T I O N
END-OF-SELECTION.
List generation
PERFORM basic_list.
*& Form validate_flds
Validation of Selection Screen fields
FORM validate_flds .
Validate Customer Code
CLEAR kna1-kunnr.
SELECT kunnr UP TO 1 ROWS
INTO kna1-kunnr
FROM kna1
WHERE kunnr IN s_kunnr AND
spras = sy-langu.
ENDSELECT.
IF sy-subrc <> 0.
MESSAGE e000 WITH 'Invalid Customer Code range'(023).
ENDIF.
Validate Company Code
CLEAR t001-bukrs.
SELECT bukrs UP TO 1 ROWS
INTO t001-bukrs
FROM t001
WHERE bukrs = p_bukrs AND
spras = sy-langu.
ENDSELECT.
IF sy-subrc <> 0.
MESSAGE e021. " Invalid Company Code range
ENDIF.
IF ( p_tage1 > p_tage2 ) OR ( p_tage1 > p_tage3 ) OR
( p_tage1 > p_tage4 ).
MESSAGE e999 WITH 'Column 1 greater'(004)
'than Column# 2 or 3 or 4'(005).
ENDIF.
*column 2
IF ( p_tage2 > p_tage3 ) OR ( p_tage1 > p_tage4 ).
MESSAGE e999 WITH 'Column 2 greater'(006)
'than Column# 3 or 4'(007).
ENDIF.
*column3
IF ( p_tage3 > p_tage4 ).
MESSAGE e999 WITH 'Column 3 greater'(008)
'than Column#4'(009).
ENDIF.
ENDFORM. " validate_flds
*& Form fetch_data
Fetching Data from Database Tables
FORM fetch_data .
Date Range Population
r_date1-sign = 'I'.
r_date1-option = 'BT'.
r_date1-low = p_allgst.
r_date1-high = r_date1-low + p_tage1.
APPEND r_date1.
r_date2-sign = 'I'.
r_date2-option = 'BT'.
r_date2-low = r_date1-high + 1.
r_date2-high = r_date1-low + p_tage2.
APPEND r_date2.
r_date3-sign = 'I'.
r_date3-option = 'BT'.
r_date3-low = r_date2-high + 1.
r_date3-high = r_date1-low + p_tage3.
APPEND r_date3.
r_date4-sign = 'I'.
r_date4-option = 'BT'.
r_date4-low = r_date3-high + 1.
r_date4-high = r_date1-low + p_tage4.
APPEND r_date4.
Select the Customer Open Items data from bsid
SELECT l~kunnr
l1~name1
b~waers
b~dmbtr
b~zfbdt
b~zbd1t
b~zbd2t
b~zbd3t
b~belnr
b~xblnr
b~shkzg
b~blart
INTO CORRESPONDING FIELDS OF TABLE int_bsid
FROM knb1 AS l INNER JOIN kna1 AS l1
ON lkunnr = l1kunnr
INNER JOIN bsid AS b
ON lkunnr = bkunnr AND
lbukrs = bbukrs
WHERE l~kunnr IN s_kunnr AND
l~bukrs = p_bukrs and
b~zfbdt le p_allgst.
IF SY-SUBRC <> 0.
MESSAGE i000 WITH 'No Data found'(027).
ENDIF.
Removing the date limit to get the due items in the past
DELETE int_bsid WHERE
( blart NE 'RE' AND blart NE 'KR' ) OR
shkzg NE 'H'.
SORT int_bsid BY kunnr.
ENDFORM. " fetch_data
*& Form header
Display the Report Columns
FORM header .
v_tage1 = p_tage1 + 1.
v_tage2 = p_tage2 + 1.
v_tage3 = p_tage3 + 1.
v_fidd = p_tage1.
v_sedd = p_tage2.
v_thdd = p_tage3.
v_fodd = p_tage4.
MOVE v_fodd0(4) TO v_fodd1(3).
v_fodd+0(1) = space.
CONCATENATE '1 to'(010) v_fidd INTO v_fir.
CONCATENATE v_tage1 ' to '(011) v_sedd INTO v_sec.
CONCATENATE v_tage2 ' to '(011) v_thdd INTO v_thir.
CONCATENATE v_tage3 ' to '(011) space v_fodd INTO v_four.
Standard header
clear: v_date1, v_str, v_str1, v_tage.
write p_allgst to v_date1.
Move p_tage4 to v_tage.
concatenate '>' v_tage text-025 into v_str1.
concatenate
'Summary of Ageing Analysis for Customer Open Invoices as on'(013)
v_date1 into v_str separated by space.
CALL FUNCTION 'Z_STANDARD_HEADER'
EXPORTING
title1 = 'Saudi International Petrochemical Company'(012)
title2 = v_str.
FORMAT COLOR OFF.
WRITE : /1(168) sy-uline.
FORMAT COLOR 1 INTENSIFIED.
WRITE :/1 sy-vline, 13 sy-vline, 49 sy-vline,
50(101) 'Invoices Due For(In Days)'(014) CENTERED,
151 sy-vline, 168 sy-vline .
WRITE :/1 sy-vline, 2(11) 'Customer#'(015) CENTERED,
13 sy-vline ,14(35) 'Customer Name'(016) CENTERED,
49 sy-vline,
50(101) sy-uline,151 sy-vline,
152(16) 'Total'(017) CENTERED,
168 sy-vline.
WRITE : /1 sy-vline,13 sy-vline, 49 sy-vline,
50(16) v_fir CENTERED, 66 sy-vline,
67(16) v_sec CENTERED, 83 sy-vline,
84(16) v_thir CENTERED, 100 sy-vline,
101(16) v_four CENTERED, 117 sy-vline,
118(16) v_str1 centered, 134 sy-vline,
135(16) 'Already Overdue'(018) CENTERED,151 sy-vline,
168 sy-vline.
FORMAT COLOR OFF.
WRITE : /1(168) sy-uline.
ENDFORM. " header
*& Form basic_list
Display the Basic List
FORM basic_list .
NEW-PAGE LINE-SIZE 168.
LOOP AT int_bsid.
CLEAR v_date.
IF int_bsid-zbd3t <> ' '.
v_date = int_bsid-zfbdt + int_bsid-zbd3t.
ELSE.
IF int_bsid-zbd2t <> ' '.
v_date = int_bsid-zfbdt + int_bsid-zbd2t.
ELSE.
v_date = int_bsid-zfbdt + int_bsid-zbd1t.
ENDIF.
ENDIF.
IF int_bsid-zbd1t = ' '.
v_date = int_bsid-zfbdt.
ENDIF.
IF v_date IN r_date1.
int_final-total1 = int_final-total1 + int_bsid-dmbtr.
ELSEIF v_date IN r_date2.
int_final-total2 = int_final-total2 + int_bsid-dmbtr.
ELSEIF v_date IN r_date3.
int_final-total3 = int_final-total3 + int_bsid-dmbtr.
ELSEIF v_date IN r_date4.
int_final-total4 = int_final-total4 + int_bsid-dmbtr.
ELSEif v_date > r_date4-high.
int_final-total5 = int_final-total5 + int_bsid-dmbtr.
ELSEif v_date < p_allgst.
int_final-total6 = int_final-total6 + int_bsid-dmbtr.
ENDIF.
AT END OF kunnr.
v_flag = 1.
ENDAT.
IF v_flag = 1.
int_final-kunnr = int_bsid-kunnr.
int_final-name1 = int_bsid-name1.
int_final-total = int_final-total1 + int_final-total2 +
int_final-total3 + int_final-total4 + int_final-total5 +
int_final-total6.
APPEND int_final.
v_gtotal1 = v_gtotal1 + int_final-total1.
v_gtotal2 = v_gtotal2 + int_final-total2.
v_gtotal3 = v_gtotal3 + int_final-total3.
v_gtotal4 = v_gtotal4 + int_final-total4.
v_gtotal5 = v_gtotal5 + int_final-total5.
v_gtotal6 = v_gtotal6 + int_final-total6.
v_gtotal = v_gtotal + int_final-total.
WRITE: /1 sy-vline,
2 int_final-kunnr COLOR 4 INTENSIFIED ON,
13 sy-vline,
14 int_final-name1 COLOR 4 INTENSIFIED ON,
49 sy-vline.
DATA : v_rem.
v_rem = sy-tabix MOD 2.
IF v_rem NE 0.
FORMAT COLOR 2 INTENSIFIED.
WRITE : 50 int_final-total1 CURRENCY int_bsid-waers,
66 sy-vline,
67 int_final-total2 CURRENCY int_bsid-waers,
83 sy-vline,
84 int_final-total3 CURRENCY int_bsid-waers,
100 sy-vline,
101 int_final-total4 CURRENCY int_bsid-waers,
117 sy-vline,
118 int_final-total5 CURRENCY int_bsid-waers,
134 sy-vline,
135 int_final-total6 CURRENCY int_bsid-waers,
151 sy-vline,
152 int_final-total CURRENCY int_bsid-waers,
168 sy-vline.
ELSE.
WRITE : 50 int_final-total1 CURRENCY int_bsid-waers,
66 sy-vline,
67 int_final-total2 CURRENCY int_bsid-waers,
83 sy-vline,
84 int_final-total3 CURRENCY int_bsid-waers,
100 sy-vline,
101 int_final-total4 CURRENCY int_bsid-waers,
117 sy-vline,
118 int_final-total5 CURRENCY int_bsid-waers,
134 sy-vline,
135 int_final-total6 CURRENCY int_bsid-waers,
151 sy-vline,
152 int_final-total CURRENCY int_bsid-waers,
168 sy-vline.
ENDIF.
FORMAT COLOR OFF.
HIDE int_final.
CLEAR int_final.
v_flag = 0.
ENDIF.
AT LAST.
WRITE : /1(168) sy-uline.
FORMAT COLOR 3 INTENSIFIED.
WRITE : /1 sy-vline, 2(47) 'GRAND TOTAL'(022) CENTERED,
49 sy-vline, 50 v_gtotal1 CURRENCY int_bsid-waers,
66 sy-vline, 67 v_gtotal2 CURRENCY int_bsid-waers,
83 sy-vline, 84 v_gtotal3 CURRENCY int_bsid-waers,
100 sy-vline,101 v_gtotal4 CURRENCY int_bsid-waers,
117 sy-vline,118 v_gtotal5 CURRENCY int_bsid-waers,
134 sy-vline,135 v_gtotal6 CURRENCY int_bsid-waers,
151 sy-vline,152 v_gtotal CURRENCY int_bsid-waers,
168 sy-vline.
HIDE : v_gtotal1,
v_gtotal2,
v_gtotal3,
v_gtotal4,
v_gtotal5,
v_gtotal6,
v_gtotal.
ENDAT.
FORMAT COLOR OFF.
ENDLOOP.
WRITE : /1(168) sy-uline.
ENDFORM. " basic_list
*& Form line_selection
When double clicked on the line display the seconday list
FORM line_selection .
NEW-PAGE LINE-SIZE 206.
Sy-lsind = 1.
DATA : v_rem,v_cnt LIKE sy-tabix.
v_cnt = 0.
SORT int_bsid BY belnr zfbdt.
LOOP AT int_bsid WHERE kunnr EQ int_final-kunnr.
v_rem = v_cnt MOD 2.
CLEAR v_date.
IF int_bsid-zbd3t <> ' '.
v_date = int_bsid-zfbdt + int_bsid-zbd3t.
ELSE.
IF int_bsid-zbd2t <> ' '.
v_date = int_bsid-zfbdt + int_bsid-zbd2t.
ELSE.
v_date = int_bsid-zfbdt + int_bsid-zbd1t.
ENDIF.
ENDIF.
IF int_bsid-zbd1t = ' '.
v_date = int_bsid-zfbdt.
ENDIF.
IF v_rem NE 0.
format color 2 intensified.
WRITE :/1 sy-vline, 2 int_bsid-belnr,
12 sy-vline,13 int_bsid-kunnr,
23 sy-vline,24 int_bsid-name1,
59 sy-vline,60 int_bsid-xblnr,
76 sy-vline,77 int_bsid-zfbdt,
87 sy-vline.
WRITE : 104 sy-vline,121 sy-vline,
138 sy-vline,155 sy-vline,
172 sy-vline, 189 sy-vline,
190 int_bsid-dmbtr CURRENCY int_bsid-waers,
206 sy-vline.
IF v_date IN r_date1.
v_subtotal1 = v_subtotal1 + int_bsid-dmbtr.
WRITE : 88 int_bsid-dmbtr CURRENCY int_bsid-waers.
ELSEIF v_date IN r_date2.
v_subtotal2 = v_subtotal2 + int_bsid-dmbtr.
WRITE : 105 int_bsid-dmbtr CURRENCY int_bsid-waers.
ELSEIF v_date IN r_date3.
v_subtotal3 = v_subtotal3 + int_bsid-dmbtr.
WRITE : 122 int_bsid-dmbtr CURRENCY int_bsid-waers.
ELSEIF v_date IN r_date4.
v_subtotal4 = v_subtotal4 + int_bsid-dmbtr.
WRITE : 139 int_bsid-dmbtr CURRENCY int_bsid-waers.
ELSEif v_date > r_date4-high.
v_subtotal5 = v_subtotal5 + int_bsid-dmbtr.
WRITE : 156 int_bsid-dmbtr CURRENCY int_bsid-waers.
ELSEif v_date < p_allgst.
v_subtotal6 = v_subtotal6 + int_bsid-dmbtr.
WRITE : 173 int_bsid-dmbtr CURRENCY int_bsid-waers.
ENDIF.
format color off.
ELSE.
WRITE :/1 sy-vline, 2 int_bsid-belnr,
12 sy-vline,13 int_bsid-kunnr,
23 sy-vline,24 int_bsid-name1,
59 sy-vline,60 int_bsid-xblnr,
76 sy-vline,77 int_bsid-zfbdt,
87 sy-vline.
WRITE : 104 sy-vline,121 sy-vline,
138 sy-vline,155 sy-vline,
172 sy-vline,189 sy-vline,
190 int_bsid-dmbtr CURRENCY int_bsid-waers,
206 sy-vline.
IF v_date IN r_date1.
v_subtotal1 = v_subtotal1 + int_bsid-dmbtr.
WRITE : 88 int_bsid-dmbtr CURRENCY int_bsid-waers.
ELSEIF v_date IN r_date2.
v_subtotal2 = v_subtotal2 + int_bsid-dmbtr.
WRITE : 105 int_bsid-dmbtr CURRENCY int_bsid-waers.
ELSEIF v_date IN r_date3.
v_subtotal3 = v_subtotal3 + int_bsid-dmbtr.
WRITE : 122 int_bsid-dmbtr CURRENCY int_bsid-waers.
ELSEIF v_date IN r_date4.
v_subtotal4 = v_subtotal4 + int_bsid-dmbtr.
WRITE : 139 int_bsid-dmbtr CURRENCY int_bsid-waers.
ELSEif v_date > r_date4-high.
v_subtotal5 = v_subtotal5 + int_bsid-dmbtr.
WRITE : 156 int_bsid-dmbtr CURRENCY int_bsid-waers.
ELSEif v_date < p_allgst.
v_subtotal6 = v_subtotal6 + int_bsid-dmbtr.
WRITE : 173 int_bsid-dmbtr CURRENCY int_bsid-waers.
ENDIF.
ENDIF.
FORMAT COLOR OFF.
v_cnt = v_cnt + 1.
ENDLOOP.
WRITE : /1(206) sy-uline.
v_subtotal = v_subtotal1 + v_subtotal2 + v_subtotal3
+ v_subtotal4 + v_subtotal5 + v_subtotal6.
FORMAT COLOR 3 INTENSIFIED.
WRITE : /1 sy-vline,
2(85) 'Total'(017) CENTERED CURRENCY int_bsid-waers ,
87 sy-vline,
88 v_subtotal1 CURRENCY int_bsid-waers,
104 sy-vline,
105 v_subtotal2 CURRENCY int_bsid-waers,
121 sy-vline,
122 v_subtotal3 CURRENCY int_bsid-waers,
138 sy-vline,
139 v_subtotal4 CURRENCY int_bsid-waers,
155 sy-vline,
156 v_subtotal5 CURRENCY int_bsid-waers,
172 sy-vline,
173 v_subtotal6 CURRENCY int_bsid-waers,
189 sy-vline,
190 v_subtotal CURRENCY int_bsid-waers,
206 sy-vline.
FORMAT COLOR OFF.
WRITE : /1(206) sy-uline.
CLEAR : v_subtotal,v_subtotal1,v_subtotal2,v_subtotal3,
v_subtotal4,v_subtotal5,v_gtotal1,v_gtotal2,v_gtotal3,
v_gtotal4, v_gtotal5,v_gtotal,v_subtotal6,v_gtotal6.
ENDFORM. " line_selection
*& Form header1
Secondary List Header
FORM header1 .
Standard header
clear: v_date1, v_str, v_str1, v_tage.
write p_allgst to v_date1.
Move p_tage4 to v_tage.
concatenate '>' v_tage text-025 into v_str1.
concatenate
'Details of Ageing Analysis for Customer Open Invoices as on'(024)
v_date1 into v_str separated by space.
CALL FUNCTION 'Z_STANDARD_HEADER'
EXPORTING
title1 = 'Saudi International Petrochemical Company'(012)
title2 = v_str.
FORMAT COLOR 1 intensified.
WRITE :/1(206) sy-uline.
WRITE :/1 sy-vline,12 sy-vline ,
23 sy-vline,59 sy-vline,76 sy-vline,87 sy-vline,
88(101) 'Invoices Due For(In Days)'(014) CENTERED,
189 sy-vline,206 sy-vline.
WRITE : /1 sy-vline, 2(10) 'Doc Number'(021) CENTERED,
12 sy-vline, 13(10) 'Customer#'(015) CENTERED,
23 sy-vline, 24(35) 'Customer Name'(016) CENTERED,
59 sy-vline, 60(16) 'Ref invoice#'(019) CENTERED,
76 sy-vline, 77(10) 'Inv dt'(020) CENTERED,
87 sy-vline, 88(101) sy-uline,
189 sy-vline,190(16) 'Total'(017) CENTERED,
206 sy-vline.
WRITE : /1 sy-vline, 12 sy-vline,
23 sy-vline,59 sy-vline,
76 sy-vline,87 sy-vline,
88(16) v_fir CENTERED, 104 sy-vline,
105(16) v_sec CENTERED, 121 sy-vline,
122(16) v_thir CENTERED, 138 sy-vline,
139(16) v_four CENTERED, 155 sy-vline,
156(16) v_str1 CENTERED,
172 sy-vline,
173(16) 'Already Overdue'(018) CENTERED,
189 sy-vline,
206 sy-vline.
format color off.
WRITE : /1(206) sy-uline.
ENDFORM. " header1
REPORT zfi_vendor_ageing
NO STANDARD PAGE HEADING
LINE-COUNT 58
line-size 168
MESSAGE-ID zh_msg.
Report Name : Vendor Open Items Ageing Report
Purpose : This report displays the Vendor Open Items based on
different Ageing days (Calculated by taking the Base
Line date and the days mentioned in Payment Terms)
M O D I F I C A T I O N L O G
Date | Change Number | Initials | Description
30-Aug-2004 | DTSK900**** | Anji Reddy | Initial
D A T A B A S E T A B L E S D E C L A R A T I O N
TABLES: lfa1, " Vendor Master (General)
t001, " Company Codes
rfpdo.
I N T E R N A L T A B L E S D E C L A R A T I O N S *
Internal Table for Vendor Open Items Data
DATA: BEGIN OF int_bsik OCCURS 0,
lifnr LIKE bsik-lifnr, " Vendor Number
name1 LIKE lfa1-name1, " Vendor Name
shkzg LIKE bsik-shkzg, " Dr/Cr Indicator
belnr LIKE bsik-belnr, " Document Number
xblnr LIKE bsik-xblnr, " Ref Doc No
blart LIKE bsik-blart, " Document Type
zfbdt LIKE bsik-zfbdt, " Base Line Date
zbd1t LIKE bsik-zbd1t, " Due date1
zbd2t LIKE bsik-zbd2t, " Due Date2
zbd3t LIKE bsik-zbd3t, " Due Date3
waers LIKE bsik-waers, " Currency
dmbtr LIKE bsik-dmbtr, " Amount in Local Curr
END OF int_bsik.
Internal Table for Amounts Sum Up Data
DATA: BEGIN OF int_final OCCURS 0,
lifnr LIKE bsik-lifnr, " Vendor Number
name1 LIKE lfa1-name1, " Vendor Name
total1 LIKE bsik-dmbtr, " Amount in Local Curr
total2 LIKE bsik-dmbtr, " Amount in Local Curr
total3 LIKE bsik-dmbtr, " Amount in Local Curr
total4 LIKE bsik-dmbtr, " Amount in Local Curr
total5 LIKE bsik-dmbtr, " Amount in Local Curr
total6 LIKE bsik-dmbtr, " Amount in Local Curr
total LIKE bsik-dmbtr, " Amount in Local Curr
END OF int_final.
D A T A D E C L A R A T I O N S
DATA : v_flag, " Flag
v_gtotal1 LIKE bsik-dmbtr, " Amount Totals
v_gtotal2 LIKE bsik-dmbtr, " Amount Totals
v_gtotal3 LIKE bsik-dmbtr, " Amount Totals
v_gtotal4 LIKE bsik-dmbtr, " Amount Totals
v_gtotal5 LIKE bsik-dmbtr, " Amount Totals
v_gtotal6 LIKE bsik-dmbtr, " Amount Totals
v_gtotal LIKE bsik-dmbtr, " Amount Totals
v_subtotal1 LIKE bsik-dmbtr, " Amount Totals
v_subtotal2 LIKE bsik-dmbtr, " Amount Totals
v_subtotal3 LIKE bsik-dmbtr, " Amount Totals
v_subtotal4 LIKE bsik-dmbtr, " Amount Totals
v_subtotal5 LIKE bsik-dmbtr, " Amount Totals
v_subtotal6 LIKE bsik-dmbtr, " Amount Totals
v_subtotal LIKE bsik-dmbtr, " Amount Totals
v_date LIKE bsik-zfbdt, " Due Date
v_tage1(4), " Age 30 days
v_tage2(4), " Age 60 days
v_tage3(4), " Age 90 days
v_fir(15), " Column Text1
v_sec(15), " Column Text2
v_thir(15), " Column Text3
v_four(17), " Column Text4
v_fidd(4), " Days field1
v_sedd(4), " Days field2
v_thdd(4), " Days field3
v_fodd(4), " Days field4
v_str TYPE SY-LISEL, " String
v_str1(11), " String
v_tage(3), " String
v_date1(10). " Date field
R A N G E D E C L A R A T I O N S
RANGES: r_date1 FOR bsik-zfbdt, " Date Range 1
r_date2 FOR bsik-zfbdt, " Date Range 2
r_date3 FOR bsik-zfbdt, " Date Range 3
r_date4 FOR bsik-zfbdt. " Date Range 4
S E L E C T I O N S C R E E N *
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-001.
SELECT-OPTIONS: s_lifnr FOR lfa1-lifnr. "Vendor account
PARAMETERS: p_bukrs LIKE t001-bukrs. "Co. Code
SELECTION-SCREEN END OF BLOCK b1.
SELECTION-SCREEN BEGIN OF BLOCK b2 WITH FRAME TITLE text-002.
PARAMETERS: p_allgst LIKE rfpdo-allgstid OBLIGATORY DEFAULT sy-datum.
"Open items at key date
SELECTION-SCREEN END OF BLOCK b2.
SELECTION-SCREEN BEGIN OF BLOCK b3 WITH FRAME TITLE text-003.
PARAMETERS: p_tage1 LIKE rfpdo1-allgfael DEFAULT '30',
p_tage2 LIKE rfpdo1-allgfael DEFAULT '60',
p_tage3 LIKE rfpdo1-allgfael DEFAULT '90',
p_tage4 LIKE rfpdo1-allgfael DEFAULT '120'.
SELECTION-SCREEN END OF BLOCK b3.
A T S E L E C T I O N S C R E E N *
AT SELECTION-SCREEN.
Validate the screen fields
PERFORM validate_flds.
S T A R T O F S E L E C T I O N *
START-OF-SELECTION.
Fetch main data
PERFORM fetch_data.
T O P O F P A G E
Header
TOP-OF-PAGE.
PERFORM header.
E N D O F P A G E
Footer
END-OF-PAGE.
ULINE.
T O P O F P A G E D U R I N G L I N E S E L E C T I O N *
Top of Page in Secondary List
TOP-OF-PAGE DURING LINE-SELECTION.
PERFORM header1.
A T L I N E S E L E C T I O N *
AT LINE-SELECTION.
Perform Line Selections
PERFORM line_selection.
E N D O F S E L E C T I O N
END-OF-SELECTION.
List generation
PERFORM basic_list.
*& Form validate_flds
Validation of Selection Screen fields
FORM validate_flds .
Validate Vendor Code
CLEAR lfa1-lifnr.
SELECT lifnr UP TO 1 ROWS
INTO lfa1-lifnr
FROM lfa1
WHERE lifnr IN s_lifnr AND
spras = sy-langu.
ENDSELECT.
IF sy-subrc <> 0.
MESSAGE e000 WITH 'Invalid Vendor Code range'(023).
ENDIF.
Validate Company Code
CLEAR t001-bukrs.
SELECT bukrs UP TO 1 ROWS
INTO t001-bukrs
FROM t001
WHERE bukrs = p_bukrs AND
spras = sy-langu.
ENDSELECT.
IF sy-subrc <> 0.
MESSAGE e021. " Invalid Company Code range
ENDIF.
IF ( p_tage1 > p_tage2 ) OR ( p_tage1 > p_tage3 ) OR
( p_tage1 > p_tage4 ).
MESSAGE e999 WITH 'Column 1 greater'(004)
'than Column# 2 or 3 or 4'(005).
ENDIF.
*column 2
IF ( p_tage2 > p_tage3 ) OR ( p_tage1 > p_tage4 ).
MESSAGE e999 WITH 'Column 2 greater'(006)
'than Column# 3 or 4'(007).
ENDIF.
*column3
IF ( p_tage3 > p_tage4 ).
MESSAGE e999 WITH 'Column 3 greater'(008)
'than Column#4'(009).
ENDIF.
ENDFORM. " validate_flds
*& Form fetch_data
Fetching Data from Database Tables
FORM fetch_data .
Date Range Population
r_date1-sign = 'I'.
r_date1-option = 'BT'.
r_date1-low = p_allgst.
r_date1-high = r_date1-low + p_tage1.
APPEND r_date1.
r_date2-sign = 'I'.
r_date2-option = 'BT'.
r_date2-low = r_date1-high + 1.
r_date2-high = r_date1-low + p_tage2.
APPEND r_date2.
r_date3-sign = 'I'.
r_date3-option = 'BT'.
r_date3-low = r_date2-high + 1.
r_date3-high = r_date1-low + p_tage3.
APPEND r_date3.
r_date4-sign = 'I'.
r_date4-option = 'BT'.
r_date4-low = r_date3-high + 1.
r_date4-high = r_date1-low + p_tage4.
APPEND r_date4.
Select the Vendor Open Items data from BSIK
SELECT l~lifnr
l1~name1
b~waers
b~dmbtr
b~zfbdt
b~zbd1t
b~zbd2t
b~zbd3t
b~belnr
b~xblnr
b~shkzg
b~blart
INTO CORRESPONDING FIELDS OF TABLE int_bsik
FROM lfb1 AS l INNER JOIN lfa1 AS l1
ON llifnr = l1lifnr
INNER JOIN bsik AS b
ON llifnr = blifnr AND
lbukrs = bbukrs
WHERE l~lifnr IN s_lifnr AND
l~bukrs = p_bukrs and
b~zfbdt le p_allgst.
IF SY-SUBRC <> 0.
MESSAGE i000 WITH 'No Data found'(027).
ENDIF.
Removing the date limit to get the due items in the past
DELETE int_bsik WHERE
( blart NE 'RE' AND blart NE 'KR' ) OR
shkzg NE 'H'.
SORT int_bsik BY lifnr.
ENDFORM. " fetch_data
*& Form header
Display the Report Columns
FORM header .
v_tage1 = p_tage1 + 1.
v_tage2 = p_tage2 + 1.
v_tage3 = p_tage3 + 1.
v_fidd = p_tage1.
v_sedd = p_tage2.
v_thdd = p_tage3.
v_fodd = p_tage4.
MOVE v_fodd0(4) TO v_fodd1(3).
v_fodd+0(1) = space.
CONCATENATE '1 to'(010) v_fidd INTO v_fir.
CONCATENATE v_tage1 ' to '(011) v_sedd INTO v_sec.
CONCATENATE v_tage2 ' to '(011) v_thdd INTO v_thir.
CONCATENATE v_tage3 ' to '(011) space v_fodd INTO v_four.
Standard header
clear: v_date1, v_str, v_str1, v_tage.
write p_allgst to v_date1.
Move p_tage4 to v_tage.
concatenate '>' v_tage text-025 into v_str1.
concatenate
'Summary of Ageing Analysis for Vendor Open Invoices as on'(013)
v_date1 into v_str separated by space.
CALL FUNCTION 'Z_STANDARD_HEADER'
EXPORTING
title1 = 'Saudi International Petrochemical Company'(012)
title2 = v_str.
FORMAT COLOR OFF.
WRITE : /1(168) sy-uline.
FORMAT COLOR 1 INTENSIFIED.
WRITE :/1 sy-vline, 13 sy-vline, 49 sy-vline,
50(101) 'Invoices Due For(In Days)'(014) CENTERED,
151 sy-vline, 168 sy-vline .
WRITE :/1 sy-vline, 2(11) 'Vendor#'(015) CENTERED,
13 sy-vline ,14(35) 'Vendor Name'(016) CENTERED,
49 sy-vline,
50(101) sy-uline,151 sy-vline,
152(16) 'Total'(017) CENTERED,
168 sy-vline.
WRITE : /1 sy-vline,13 sy-vline, 49 sy-vline,
50(16) v_fir CENTERED, 66 sy-vline,
67(16) v_sec CENTERED, 83 sy-vline,
84(16) v_thir CENTERED, 100 sy-vline,
101(16) v_four CENTERED, 117 sy-vline,
118(16) v_str1 centered, 134 sy-vline,
135(16) 'Already Overdue'(018) CENTERED,151 sy-vline,
168 sy-vline.
FORMAT COLOR OFF.
WRITE : /1(168) sy-uline.
ENDFORM. " header
*& Form basic_list
Display the Basic List
FORM basic_list .
NEW-PAGE LINE-SIZE 168.
LOOP AT int_bsik.
CLEAR v_date.
IF int_bsik-zbd3t <> ' '.
v_date = int_bsik-zfbdt + int_bsik-zbd3t.
ELSE.
IF int_bsik-zbd2t <> ' '.
v_date = int_bsik-zfbdt + int_bsik-zbd2t.
ELSE.
v_date = int_bsik-zfbdt + int_bsik-zbd1t.
ENDIF.
ENDIF.
IF int_bsik-zbd1t = ' '.
v_date = int_bsik-zfbdt.
ENDIF.
IF v_date IN r_date1.
int_final-total1 = int_final-total1 + int_bsik-dmbtr.
ELSEIF v_date IN r_date2.
int_final-total2 = int_final-total2 + int_bsik-dmbtr.
ELSEIF v_date IN r_date3.
int_final-total3 = int_final-total3 + int_bsik-dmbtr.
ELSEIF v_date IN r_date4.
int_final-total4 = int_final-total4 + int_bsik-dmbtr.
ELSEif v_date > r_date4-high.
int_final-total5 = int_final-total5 + int_bsik-dmbtr.
ELSEif v_date < p_allgst.
int_final-total6 = int_final-total6 + int_bsik-dmbtr.
ENDIF.
AT END OF lifnr.
v_flag = 1.
ENDAT.
IF v_flag = 1.
int_final-lifnr = int_bsik-lifnr.
int_final-name1 = int_bsik-name1.
int_final-total = int_final-total1 + int_final-total2 +
int_final-total3 + int_final-total4 + int_final-total5 +
int_final-total6.
APPEND int_final.
v_gtotal1 = v_gtotal1 + int_final-total1.
v_gtotal2 = v_gtotal2 + int_final-total2.
v_gtotal3 = v_gtotal3 + int_final-total3.
v_gtotal4 = v_gtotal4 + int_final-total4.
v_gtotal5 = v_gtotal5 + int_final-total5.
v_gtotal6 = v_gtotal6 + int_final-total6.
v_gtotal = v_gtotal + int_final-total.
WRITE: /1 sy-vline,
2 int_final-lifnr COLOR 4 INTENSIFIED ON,
13 sy-vline,
14 int_final-name1 COLOR 4 INTENSIFIED ON,
49 sy-vline.
DATA : v_rem.
v_rem = sy-tabix MOD 2.
IF v_rem NE 0.
FORMAT COLOR 2 INTENSIFIED.
WRITE : 50 int_final-total1 CURRENCY int_bsik-waers,
66 sy-vline,
67 int_final-total2 CURRENCY int_bsik-waers,
83 sy-vline,
84 int_final-total3 CURRENCY int_bsik-waers,
100 sy-vline,
101 int_final-total4 CURRENCY int_bsik-waers,
117 sy-vline,
118 int_final-total5 CURRENCY int_bsik-waers,
134 sy-vline,
135 int_final-total6 CURRENCY int_bsik-waers,
151 sy-vline,
152 int_final-total CURRENCY int_bsik-waers,
168 sy-vline.
ELSE.
WRITE : 50 int_final-total1 CURRENCY int_bsik-waers,
66 sy-vline,
67 int_final-total2 CURRENCY int_bsik-waers,
83 sy-vline,
84 int_final-total3 CURRENCY int_bsik-waers,
100 sy-vline,
101 int_final-total4 CURRENCY int_bsik-waers,
117 sy-vline,
118 int_final-total5 CURRENCY int_bsik-waers,
134 sy-vline,
135 int_final-total6 CURRENCY int_bsik-waers,
151 sy-vline,
152 int_final-total CURRENCY int_bsik-waers,
168 sy-vline.
ENDIF.
FORMAT COLOR OFF.
HIDE int_final.
CLEAR int_final.
v_flag = 0.
ENDIF.
AT LAST.
WRITE : /1(168) sy-uline.
FORMAT COLOR 3 INTENSIFIED.
WRITE : /1 sy-vline, 2(47) 'GRAND TOTAL'(022) CENTERED,
49 sy-vline, 50 v_gtotal1 CURRENCY int_bsik-waers,
66 sy-vline, 67 v_gtotal2 CURRENCY int_bsik-waers,
83 sy-vline, 84 v_gtotal3 CURRENCY int_bsik-waers,
100 sy-vline,101 v_gtotal4 CURRENCY int_bsik-waers,
117 sy-vline,118 v_gtotal5 CURRENCY int_bsik-waers,
134 sy-vline,135 v_gtotal6 CURRENCY int_bsik-waers,
151 sy-vline,152 v_gtotal CURRENCY int_bsik-waers,
168 sy-vline.
HIDE : v_gtotal1,
v_gtotal2,
v_gtotal3,
v_gtotal4,
v_gtotal5,
v_gtotal6,
v_gtotal.
ENDAT.
FORMAT COLOR OFF.
ENDLOOP.
WRITE : /1(168) sy-uline.
ENDFORM. " basic_list
*& Form line_selection
When double clicked on the line display the seconday list
FORM line_selection .
NEW-PAGE LINE-SIZE 206.
Sy-lsind = 1.
DATA : v_rem,v_cnt LIKE sy-tabix.
v_cnt = 0.
SORT int_bsik BY belnr zfbdt.
LOOP AT int_bsik WHERE lifnr EQ int_final-lifnr.
v_rem = v_cnt MOD 2.
CLEAR v_date.
IF int_bsik-zbd3t <> ' '.
v_date = int_bsik-zfbdt + int_bsik-zbd3t.
ELSE.
IF int_bsik-zbd2t <> ' '.
v_date = int_bsik-zfbdt + int_bsik-zbd2t.
ELSE.
v_date = int_bsik-zfbdt + int_bsik-zbd1t.
ENDIF.
ENDIF.
IF int_bsik-zbd1t = ' '.
v_date = int_bsik-zfbdt.
ENDIF.
IF v_rem NE 0.
format color 2 intensified.
WRITE :/1 sy-vline, 2 int_bsik-belnr,
12 sy-vline,13 int_bsik-lifnr,
23 sy-vline,24 int_bsik-name1,
59 sy-vline,60 int_bsik-xblnr,
76 sy-vline,77 int_bsik-zfbdt,
87 sy-vline.
WRITE : 104 sy-vline,121 sy-vline,
138 sy-vline,155 sy-vline,
172 sy-vline, 189 sy-vline,
190 int_bsik-dmbtr CURRENCY int_bsik-waers,
206 sy-vline.
IF v_date IN r_date1.
v_subtotal1 = v_subtotal1 + int_bsik-dmbtr.
WRITE : 88 int_bsik-dmbtr CURRENCY int_bsik-waers.
ELSEIF v_date IN r_date2.
v_subtotal2 = v_subtotal2 + int_bsik-dmbtr.
WRITE : 105 int_bsik-dmbtr CURRENCY int_bsik-waers.
ELSEIF v_date IN r_date3.
v_subtotal3 = v_subtotal3 + int_bsik-dmbtr.
WRITE : 122 int_bsik-dmbtr CURRENCY int_bsik-waers.
ELSEIF v_date IN r_date4.
v_subtotal4 = v_subtotal4 + int_bsik-dmbtr.
WRITE : 139 int_bsik-dmbtr CURRENCY int_bsik-waers.
ELSEif v_date > r_date4-high.
v_subtotal5 = v_subtotal5 + int_bsik-dmbtr.
WRITE : 156 int_bsik-dmbtr CURRENCY int_bsik-waers.
ELSEif v_date < p_allgst.
v_subtotal6 = v_subtotal6 + int_bsik-dmbtr.
WRITE : 173 int_bsik-dmbtr CURRENCY int_bsik-waers.
ENDIF.
format color off.
ELSE.
WRITE :/1 sy-vline, 2 int_bsik-belnr,
12 sy-vline,13 int_bsik-lifnr,
23 sy-vline,24 int_bsik-name1,
59 sy-vline,60 int_bsik-xblnr,
76 sy-vline,77 int_bsik-zfbdt,
87 sy-vline.
WRITE : 104 sy-vline,121 sy-vline,
138 sy-vline,155 sy-vline,
172 sy-vline,189 sy-vline,
190 int_bsik-dmbtr CURRENCY int_bsik-waers,
206 sy-vline.
IF v_date IN r_date1.
v_subtotal1 = v_subtotal1 + int_bsik-dmbtr.
WRITE : 88 int_bsik-dmbtr CURRENCY int_bsik-waers.
ELSEIF v_date IN r_date2.
v_subtotal2 = v_subtotal2 + int_bsik-dmbtr.
WRITE : 105 int_bsik-dmbtr CURRENCY int_bsik-waers.
ELSEIF v_date IN r_date3.
v_subtotal3 = v_subtotal3 + int_bsik-dmbtr.
WRITE : 122 int_bsik-dmbtr CURRENCY int_bsik-waers.
ELSEIF v_date IN r_date4.
v_subtotal4 = v_subtotal4 + int_bsik-dmbtr.
WRITE : 139 int_bsik-dmbtr CURRENCY int_bsik-waers.
ELSEif v_date > r_date4-high.
v_subtotal5 = v_subtotal5 + int_bsik-dmbtr.
WRITE : 156 int_bsik-dmbtr CURRENCY int_bsik-waers.
ELSEif v_date < p_allgst.
v_subtotal6 = v_subtotal6 + int_bsik-dmbtr.
WRITE : 173 int_bsik-dmbtr CURRENCY int_bsik-waers.
ENDIF.
ENDIF.
FORMAT COLOR OFF.
v_cnt = v_cnt + 1.
ENDLOOP.
WRITE : /1(206) sy-uline.
v_subtotal = v_subtotal1 + v_subtotal2 + v_subtotal3
+ v_subtotal4 + v_subtotal5 + v_subtotal6.
FORMAT COLOR 3 INTENSIFIED.
WRITE : /1 sy-vline,
2(85) 'Total'(017) CENTERED CURRENCY int_bsik-waers ,
87 sy-vline,
88 v_subtotal1 CURRENCY int_bsik-waers,
104 sy-vline,
105 v_subtotal2 CURRENCY int_bsik-waers,
121 sy-vline,
122 v_subtotal3 CURRENCY int_bsik-waers,
138 sy-vline,
139 v_subtotal4 CURRENCY int_bsik-waers,
155 sy-vline,
156 v_subtotal5 CURRENCY int_bsik-waers,
172 sy-vline,
173 v_subtotal6 CURRENCY int_bsik-waers,
189 sy-vline,
190 v_subtotal CURRENCY int_bsik-waers,
206 sy-vline.
FORMAT COLOR OFF.
WRITE : /1(206) sy-uline.
CLEAR : v_subtotal,v_subtotal1,v_subtotal2,v_subtotal3,
v_subtotal4,v_subtotal5,v_gtotal1,v_gtotal2,v_gtotal3,
v_gtotal4, v_gtotal5,v_gtotal,v_subtotal6,v_gtotal6.
ENDFORM. " line_selection
*& Form header1
Secondary List Header
FORM header1 .
Standard header
clear: v_date1, v_str, v_str1, v_tage.
write p_allgst to v_date1.
Move p_tage4 to v_tage.
concatenate '>' v_tage text-025 into v_str1.
concatenate
'Details of Ageing Analysis for Vendor Open Invoices as on'(024)
v_date1 into v_str separated by space.
CALL FUNCTION 'Z_STANDARD_HEADER'
EXPORTING
title1 = 'Saudi International Petrochemical Company'(012)
title2 = v_str.
FORMAT COLOR 1 intensified.
WRITE :/1(206) sy-uline.
WRITE :/1 sy-vline,12 sy-vline ,
23 sy-vline,59 sy-vline,76 sy-vline,87 sy-vline,
88(101) 'Invoices Due For(In Days)'(014) CENTERED,
189 sy-vline,206 sy-vline.
WRITE : /1 sy-vline, 2(10) 'Doc Number'(021) CENTERED,
12 sy-vline, 13(10) 'Vendor#'(015) CENTERED,
23 sy-vline, 24(35) 'Vendor Name'(016) CENTERED,
59 sy-vline, 60(16) 'Ref invoice#'(019) CENTERED,
76 sy-vline, 77(10) 'Inv dt'(020) CENTERED,
87 sy-vline, 88(101) sy-uline,
189 sy-vline,190(16) 'Total'(017) CENTERED,
206 sy-vline.
WRITE : /1 sy-vline, 12 sy-vline,
23 sy-vline,59 sy-vline,
76 sy-vline,87 sy-vline,
88(16) v_fir CENTERED, 104 sy-vline,
105(16) v_sec CENTERED, 121 sy-vline,
122(16) v_thir CENTERED, 138 sy-vline,
139(16) v_four CENTERED, 155 sy-vline,
156(16) v_str1 CENTERED,
172 sy-vline,
173(16) 'Already Overdue'(018) CENTERED,
189 sy-vline,
206 sy-vline.
format color off.
WRITE : /1(206) sy-uline.
ENDFORM. " header1
<b>The below link will give Tables & Relations.</b>
http://www.erpgenie.com/abap/tables.htm
http://goldenink.com/abap/files_in_sap.html
http://abap4.tripod.com/SAP_Tables.html
http://www.geocities.com/sapcircle/Relations.pdf
Regards,
Sree -
FEBAN - FB05 - error F5243 for vendor payment
Hello,
I kindly ask for a hint.
The vendor payment is included in eleclonical bank file.
From transaction FEBAN (Edit bank statement) for item which is not fully cleared we get to trans. FB05 (post with clearing) and try to post to account type K (vendor) - changed manually from D (customer) which is defaulted to K and vendor account number entered. The document type is not visible on selection screen when FB05 is accessed through FEBAN.
The document type for vendor payment should be KZ.
Somehow the transaction intend to hold DZ (customer payment) --> and when we hit enter an error message appears:
Account type K is not defined for document type DZ
Message no. F5243
Not sure what is driving this ...
Please, advise ...
Thanks a lot
MarcelaHello,
Please check your configuration:
IMG => Financial Accounting => Bank Accounting => Payment Transactions => Electronic Bank Statement => Make Global Settings for Electronic Bank Statement
Give your chart of accounts
Double click on posting rules.
Check the document type given for the posting rule you are using to post.
You need to change from DZ to KZ.
Regards,
Ravi -
Hi
What are the tables for Vendor Totals.
Regards
RupalVendors it is LFC1.
or
Please use for vendor balances:-
S_AC0_52000888
Regards,
vendor use table BSAK , BSIK -
Trigger of Milestone for Vendor Payment
Hi,
Is there some functionlaity available in SAP for Vendor Payment similar to Triggering of Milestone for Customer Invoices?
i.e when we confirm activities milestones are triggered which will remove billing block and vendor payments can be made.
Regards,
B P SinghHi,
As suggested by Ahmed search the forum. You will get a lot pointers. Just type Invoicing Plan as the search criteria and proceed. You can also check the link,
http://help.sap.com/saphelp_erp60/helpdata/en/86/98853478616434e10000009b38f83b/frameset.htm
Regards,
Gokul
Edited by: Gokul on Nov 10, 2009 1:32 PM -
I want to know the name of the following tables:
Vendor Master (General level)
Vendor Master table (purchase organization level)
Vendor Master (Company Code Level)
I used LFM1 table but could not find vendor name there. I want details like vendor, purch organisation, company code, reconciliation account, vendor name.
Moderator: Please, search SDNDear:
I have these details regarding master data saved in word file . Please follow given below tables for vendor master data information
Vendor Master (General Section) u2013 LFA1
Vendor Master (Company Code) u2013 LFB1
Vendor master (VAT registration numbers general section) u2013 LFAS
Vendor master (dunning data) u2013 LFB5
Vendor Master (Bank Details) u2013 LFBK
Vendor master record (withholding tax types) X u2013 LFBW
Vendor master record purchasing organization data u2013 LFM1
Vendor Master Record: Purchasing Data u2013 LFM2
Partner Functions - WYT3 -
Partner Function table for vendors in R/3.
Hi,
Can any one please let me know what is the
Partner Function table for vendors in R/3.
Thanks.Hi,
Check the table WYT3
Thanks,
Naren -
Tables for vendor invoice and payment
Hi Gurus.
I want to know from which tables i can get the information for folllowing points.
1. Vendor Invoices - Complete (Header and Item)
2. Vendor Payments Details Detail about payment method (check, wire, etc)
Please tell me tje table names.There is no specific table for header/item data for vendor invoice. Various information regarding vendor invoice (FB60) are stored in the following tables( note: Ignore the structures in the list ).
|Table Name |Table Description |
|/BEV3/CHKOMPAZVV |Append Structure CH -> CO PA |
|/CWM/ACCIT |Append Structure for Enhancement of Structure ACCIT in CWM |
|/CWM/KOMP |Catch Weight Management Enhancement |
|/DSD/TAXJURCD |Ship From Tax Jurisdiction Code: for Header Prc Comm Str |
|/SAPNEA/J_SC_LFA1 |Subcontractor Information |
|/SAPNEA/J_SC_LFB1 |Subcontracting Management |
|/SAPPSPRO/A_FI2_LONGNUM |IBU-PS: Append structure for structure NONBSEG |
|/SAPPSPRO/A_LONGNUMBER |additional fields for SPIIN number |
|/SAPPSPRO/EADD |Purchasing Document Header: Additional Data |
|/SAPPSPRO/EADD_DATA |Purchasing Document Header: Data Part Additional Information|
|/VSO/R_KNA1_A |Append to KNA1 for Vehicle Space Optimization |
|/VSO/R_KNA1_I |Additional Data for Vehicle Space Optimization for KNA1 |
|AACCHD_FMFG |US federal fields |
|AACCHD_PSO |IS-PS: ACCHD Append Structure for Payment Requests |
|AACCIT_GM |Append for Grants Management |
|AACCIT_PSO |IS-PS: ACCIT Append Structure for Payment Requests |
|AACCIT_SSP |Append for Payment Statistical Sampling Process |
|AACCIT_USFG |Append structure for US federal government |
|AAUSZ_CLR_USFG |Clearing information for US Fed (Tresury Confirmation) |
|ABKPF_PSO |IS-PS: BKPF Append Structure for Payment Requests |
|ABKPF_UMB |IS-PS: Append Structure for Transfer Transaction FMITPO |
|ABSID_PSO |IS-PS: Data appendix of open items customers |
|ABSIK_PSO |IS-PS: Data appendix of open items vendors |
|ABSIS_PSO |Local Authorities |
|ABUZ |Help Structure for Line Items to be Generated Automatically |
|ACCCR |Accounting Interface: Currency Information |
|ACCCR_FKEY |Key: Acctg Currency Data for Line Item Including Currency |
|ACCCR_KEY |Key: Accounting Currency Data for Line Item |
|ACCFI |Interface to Accounting: Financial Acctg One-Time Accts |
|ACCHD |Interface to Accounting: Header Information |
|ACCHD_KEY |Key: FI/CO Document Header |
|ACCIT |Accounting Interface: Item Information |
|ACCIT_EXTENSION |ACC Document: Additional Item Information |
|ACCIT_JV |Joint Venture Accounting |
|ACCIT_KEY |Key: FI/CO Line Item |
|ACCIT_WT |Withholding tax information for FI Interface |
|ACCRDF |Fields for Posting Small Differences: Preparation |
|ACC_DOCUMENT |Accounting document |
|ACC_KONTEXT |Context Info for FI Single Screen Transactions FB50 and FB60|
|ACERRLOG |Return Parameter |
|ACGL_HEAD |Fields for Document Header Entry Screen |
|ACGL_ITEM |Structure for Table Control: G/L Account Entry |
|ACSCR |Communication Structure for Field Modification SAPLFDCB |
|ACSPLT |Carrier for Split Information re: Current Account Line Items|
|ACSPLT_WTNEW |Proportion of New Withholding Tax |
|ACSPLT_WTOLD |Proportion of Old Withholding Tax |
|ADDR1_SEL |Address selection parameter |
|AEBPP_KNBK |Additional Fields Bank Data Biller Direct |
|AEBPP_LFBK |Additional Fields Bank Data Biller Direct |
|AFMIOI |Append for new fields ECC50/ERP |
|AFMIOI_USFG | SD order needs quantity |
|AFMISPS |Additional Fields for Table FMISPS |
|AFM_ACCIT_EXTENSION |Extension for FM Payment Update |
|AFM_FAGL_GLT0_ACCIT_EXT |Extension FM Account Assignments |
|AFM_FI_BKPF_SUBST |Append to Structure BKPF_SUBST |
|AFM_FMFCTF |Append for Fund Center substrings |
|AFM_FMFINCODE |Append for Fund substrings |
|AIFM01D |Append for IFM01D |
|AKNA1_FMFG |US Federal Government Customer Master Data Additional Fields|
|AKNA1_PSO |Local Authority Additional Fields |
|AKNB1_PSO |IS-PS: Customer Master Record, Additional Data (Co.Code) |
|AKNBK_PSO |Bank Details Dependent on Time and Account Holder |
|ALFA1_FMFG |US Federal Government Vendor Master Data Additional Fields |
|ALFA1_PSO |Local Authority Additional Fields (Address) |
|ALFB1_FMFG |PS fields for company code-specific master data field |
|ALFB1_PSO |IS-PS: Data Appendix Vendor Master Record (Company Code) |
|ALFBK_PSO |Bank Details Dependent on Time and Account Holder |
|ALVDYNP |ALV dialog screen fields |
|ALV_S_FCAT |Field Catalog (for LVC and for KKBLO) |
|ALV_S_FILT |Filter Criteria (for LVC and for KKBLO) |
|ALV_S_GRPL |Group Levels (for LVC and for KKBLO) |
|ALV_S_LAYO |Layout (for LVC and for KKBLO) |
|ALV_S_PCTL |Structure for Checking Print in ALV |
|ALV_S_PRNT |Print settings (for LVC and KKBLO) |
|ALV_S_QINF |Structure for Quickinfos of Exceptions |
|ALV_S_SGRP |Field Groups (for LVC and for KKBLO) |
|ALV_S_SORT |Sort Criteria (for LVC and for KKBLO) |
|ANBZ |Help structure for asset line item |
|ANLZACCOUNT |Additional Account Assignment Objects in Asset Accounting |
|ANLZACCOUNT_FKBER |Account Assignment Objects: ANLZACCOUNT with Function Added |
|ARC_PARAMS |ImageLink structure |
|AT003_XBLNR2 |Append structure for US federal government |
|AUSZ1 |Clearing Table 1 |
|AUSZ2 |Clearing Table 2 |
|AUSZ_CLR |Assign Clearing Item to Cleared Items |
|AUSZ_CLR_ASGMT |Assgt of Clrg Items - Cleared Items with Acct Assignment |
|AUSZ_INFO |Open item data for clearing transactions |
|AVBKPF_FMFG |US federal |
|AVBKPF_PSO |IS-PS: Append Structure VBKPF for Payment Requests |
|AVBSEGDPSO |IS-PS: Append Structure VBSEGD for Payment Requests |
|AVBSEGKPSO |IS-PS: Append Structure VBSEGK for Payment Requests |
|AVIK |Payment Advice Header |
|AVIP |Payment Advice Line Item |
|BALHDR |Application log: log header |
|BALMT |Application Log: Structure for a formatted message |
|BAL_S_CLBK |Application Log: Return routine definition |
|BAL_S_CONT |Application Log: Context |
|BAL_S_MSG |Application Log: Message Data |
|BAL_S_PAR |Application Log: Parameter Name and Value |
|BAL_S_PARM |Application log: Parameters |
|BAPIASCONT |Business Document Service: File Content ASCII |
|BAPIBDS01 |Business Document Service: Reference Structure for BAPIs |
|BAPICOMFIL |BDS: Command File for Transport Entries |
|BAPICOMPO2 |SBDS: Enhanced Component Information |
|BAPICOMPO3 |SBDS: Enhanced Component Information |
|BAPICOMPON |Business Document Service: Component Table |
|BAPICONNEC |BDS: Structure for BDS Links |
|BAPICONTEN |Business Document Service: File Content |
|BAPIDPROPT |BDS: Structure for Properties |
|BAPIFILES |Business Document Services: Transfer Table for File Names |
|BAPIPROPER |BDS: Structure for Properties |
|BAPIPROPTL |BDS: Structure for KPRO Properties |
|BAPIQUERY |BDS Structure for Query Table |
|BAPIRELAT |Business Document Service: Relations |
|BAPIRET1 |Return Parameter |
|BAPIRETURN |Return Parameter |
|BAPISIGNAT |Business Document Service: Signature Table |
|BAPISRELAT |Business Document Service: Relationship Table with Signature|
|BAPIURI |Business Document Service: URI Table |
|BDCMSGCOLL |Collecting messages in the SAP System |
|BDCRUN |Batch input: Runtime analysis |
|BDIDOCSTAT |ALE IDoc status (subset of all IDoc status fields) |
|BDI_SER |Serialization objects for one/several IDocs |
|BDN_FKT |Business Document Navigator: Functions to be Excluded |
|BDWFAP_PAR |Parameters for application function module - IDoc inbound |
|BDWFRETVAR |Assignment of IDoc or document no. to method parameter |
|BDWF_PARAM |Parameters for workflow methods for IDoc inbound processing |
|BKDF |Document Header Supplement for Recurring Entry |
|BKDF_SUBST |Process Interfaces: Substitutable fields during posting |
|BKORM |Accounting Correspondence Requests |
|BKP1 |Document Header Supplement for Update |
|BKPF |Accounting Document Header |
|BKPFBU_ALV |Document Overview: Display Document Headers in ALV Grid Ctrl|
|BKPF_CARD |Credit Card: Append for BKPF |
|BKPF_LINE |Item Category for XBKPF_TAB |
|BKPF_SUBST |Process Interfaces: Substitutable Fields During Posting |
|BKPF_USFED |Append structure for US federal government |
|BLNTAB |Document Number Table for Financial Accounting |
|BNKA |Bank master record |
|BNKAAPP |Appendix to Table BNKA |
|BNKT |Conversion of temporary to internal bank keys |
|BOOLE |Boolean variable |
|BSEC |One-Time Account Data Document Segment |
|BSEC_LINE |Item Category for XBSEC_TAB |
|BSED |Bill of Exchange Fields Document Segment |
|BSEE |Changeable Fields in the Line Item |
|BSEG |Accounting Document Segment |
|BSEGL |Document Segment: Fields Derived for Line Layout Variant |
|BSEGS |G/L Item Transfer Structure for Single Screen Transactions |
|BSEGT |Transfer Table for the Tax Postings to be Generated |
|BSEGZ |Financial Acctg Doc.Segment: Extras and Temp. Storage Fields|
|BSEG_ALV |Document Overview: Document Item Display in ALV Grid Control|
|BSEG_LINE |Item Category for XBSEG_TAB |
|BSEG_SUBST |Process Interfaces: Substitutable Fields During Posting |
|BSET |Tax Data Document Segment |
|BSEU |Line Item Additional Information (Update) |
|BSEZ |Line Item Additional Information (Online) |
|BSEZ_LINE |Line Item Category for XBSEZ_TAB |
|BSID |Accounting: Secondary Index for Customers |
|BSIK |Accounting: Secondary Index for Vendors |
|BSIP |Index for Vendor Validation of Double Documents |
|BSIS |Accounting: Secondary Index for G/L Accounts |
|BSIX |Index table for customer bills of exchange used |
|BTXKDF |Fields for Exch.Rate Difference Posting for Taxes |
|BVOR |Intercompany posting procedures |
|CACS_A_CRM_SALES_COND |Additional CRM Fields (Construction) From Sales Order Area |
|CACS_A_CUST_COND |Commissions: Customer Fields Condition Technique |
|CACS_A_FIELDSPRICING |Append for Condition Technique Fields from Commission System|
|CACS_S_CRM_SALES_COND |Additional CRM Fields (Construction) From Sales Order Area |
|CACS_S_CUST_COND |Condition Attributes |
|CACS_S_FIELDSPRICING |Comm.: All Condition Technique-Relevant Commission Fields |
|CACS_S_FSINS |Customer Fields for Condition Technique of Insurances |
|CCDATA |Payment cards: Database fields relevant to both SD and FI |
|CFW_LINK |CFW: Link Info of a Container |
|CI_COBL |Extension |
|CKI_ACCIT_ML |Transfer from MM to ML in accit-structure |
|CNTLSTRLIS |Control stream list |
|COBK |CO Object: Document Header |
|COBK_ONLY |Non-key fields only in COBK (INCLUDE structure) |
|COBL |Coding Block |
|COBLF |Coding block: Tax table structure |
|COBL_COKZ |Assignment types for CO account assignments |
|COBL_DB_INCLUDE |Include with Additional Account Assignments for DB Tables |
|COBL_EX |Coding Block for External Applications (Not CO/FI) |
|COBL_FI |Fields from COBL that Must not Be Overwritten in FI |
|COBL_FM |Additional Fields for FM |
|D010SINF |Generated Table for View D010SINF |
|D020S |System table D020S (screen sources) |
|D020T |Screen Short Description |
|DBSEG |Dialog Supplementation BSEG (Taxes) |
|DD02L |SAP Tables |
|DD03P |Structure |
|DD03V |Table fields view |
|DD07V |Generated Table for View DD07V |
|DD23L |Matchcode ID |
|DD32P |Interface structure for search help parameters |
|DDSHDEFLT |Description of a default value for search help fields |
|DDSHDESCR |Interface: elementary search helps of a search help |
|DDSHFPROP |Characteristics of search help parameters |
|DDSHIFACE |Interface description of a F4 help method |
|DDSHRETVAL |Interface Structure Search Help <-> Help System |
|DDSHSELOPT |Selection options for value selection with search help |
|DDSUX030L |Nametab Header, Database Structure DDNTT |
|DDSUX031L |Nametab Structure, Database Structure DDNTF |
|DDTYPES |Table of all Dictionary types and classes |
|DFIES |DD Interface: Table Fields for DDIF_FIELDINFO_GET |
|DISVARIANT |Layout (External Use) |
|DOKHL |Documentation: Headers |
|DPPROPS |General property structure for data provider |
|DTC_S_LAYO |Structure for Design of Double Table Control |
|DTC_S_TC |Structure for table controls in the double table dialog box |
|DTC_S_TS |Tab Title Structure |
|DYNPREAD |Fields of the current screen (with values) |
|E071 |Change & Transport System: Object Entries of Requests/Tasks |
|E071K |Change & Transport System: Key Entries of Requests/Tasks |
|EAPS_20 |Field Enhancements for EA-PS 2.0 |
|EDIDC |Control record (IDoc) |
|EDIDS |Status Record (IDoc) |
|EDIFCT |IDoc: Assignment of FM to log. message and IDoc type |
|EDIMESSAGE |Transfer Structure with all Sy Fields for T100 |
|EDI_DS |Status record for interface to EDI subsystem |
|EDI_HELP |Help Structure for Reference Fields in EDI Function Groups |
|EK05A |Communication Area Purchasing - Financial Accounting |
|ESKN |Account Assignment in Service Package |
|EUDB |Development Environment Objects |
|EUOBJ |Workbench: Development Objects |
|EXCLTAB_LINE |Lines of EXCLTAB with OK Code to be Deactivated |
|EXISTING_DOC |Original Document |
|F05ACTRL |Control Fields for SAPMF05A and Subprograms |
|FAGLBSEGL_S |Additional Sender Flds from General Ledger for Doc. Overview|
|FAGL_GLT0_ACCIT_EXT |Line Information for Document Splitting |
|FAGL_MIG_S_BUKRS_LEDGER |Combination of Company Code and Assigned Ledgers |
|FAGL_SPLIT_FLD_S |Characteristics Permitted for Split |
|FAGL_S_APPLICATION |Application and Subapplication |
|FAGL_S_BALDIM |G/L Characteristics of Document Split in New General Ledger |
|FAGL_S_BUKRS |Structure with Company Code |
|FAGL_S_BUKRS_EXT |Structure: Company Codes --> Ledgers |
|FAGL_S_CURTYPES |Currency Types of a Ledger |
|FAGL_S_MIG_001 |Structure for Table FAGL_MIG_001 & FAGL_MIG_001_S |
|FAGL_S_MIG_MGPLN_EXT |Structure: Extended Migration Plan Information |
|FAGL_S_T8G40_BS |Split Fields with Characteristic "Balance Sheet" |
|FCRD_VBKPF |Credit Card: Include for Appends for BKPF, VBKPF |
|FCRD_VBSEG |Include for Appends for VBSE* |
|FDM_AR_CASE_ATTR_1 |FSCM DM: |
|FDM_AR_LINE_ITEM |FSCM: DM |
|FDM_AR_RFPOS |FSCM-DM: Enhancemt of Line Item Disp. with Dispute Case Flds|
|FELD |Screen Painter fields (internal) |
|FICCO |Adjustment Values for External Document Items |
|FICCT |Totals Information for Interclient Posting |
|FICTX |Tax Information for ICT |
|FIELDINFO |Field attributes for a specific field |
|FIN1_PARAM |OBNG: Trans. structure for official doc. numbering (global) |
|FIN1_PARAM_FI |OBNG: FI parameters |
|FIN1_PARAM_MM |OBNG: MM Parameters |
|FIPEX_STRUC |Subfields Commitment Item |
|FIPOEXT |Help structure for line items to be generated automatically |
|FIREVDOC |Transfer Structure for Dialog Module FI_DOCUMENT_REVERS |
|FISTL_STRUC |Substructure Fund Center |
|FM01 |Financial Management Areas |
|FMBLSTRING_COMPONENTS |Component of the BL String |
|FMCI |Commitment items master data |
|FMDY |FIFM: Screen Fields |
|FMFCTR |Funds Center Master Record |
|FMFG_ACCIT_EXTENSION |Extention for all fields that have to be transfered into BL |
|FMFINCODE |FIFM: Financing code |
|FMFPO |FIFM: Commitment Item |
|FMHRBA_NEG_DOC_TYPES |HR Integration: Doc. Types for Negative Funds Commitments |
|FMHRBA_SETTINGS |Integration with HR: Settings |
|FMHRBA_VAD_SETTINGS |HR Integration: Generate Value Adjustment Docs for Changes |
|FMICCN |FM: Append Structure for FMIOI (CCN Fields) |
|FMIDATA |Common Data for Funds Management Actual Data |
|FMIDATAFI |Clean FI Data for Funds Management Actual Data |
|FMIDATAOI |Clean Open Item Data for Funds Management Actual Data |
|FMIFIIT |FI Line Item Table in Funds Management |
|FMIKEY |Common Key for Funds Management Actual Data |
|FMIKEYFI |FI - Key for Funds Management Actual Data |
|FMIKEYOI |Common Key for Funds Management Actual Data |
|FMIOI |Commitment Documents Funds Management |
|FMIOIKEY |Key for Table FMIOI |
|FMIOI_USFG | SD order needs quantity |
|FMIREF |Ref. Funds Management Actual Data to Preceding Document |
|FMISPS |General Parameters for Funds Management |
|FMIT |Totals Table for Funds Management |
|FMMRESERV |Include for the Reduction of Funds Reservations (FM) |
|FMRFC |Function Modules and their RFC Destinations |
|FMSP_SPLIT_FIELDS |PSM Fields used in multiple account splitting |
|FMT001 |Additional Customizing for Funds Management |
|FMUP00T |Update Profiles |
|FMUP01 |Update Control with Value Type Dependency |
|FMUP_INV_KEY |Extension for FM Update: FI Key of Invoice |
|FMUP_PAY_KEY |Extension for FM Update: FI Key of Payment |
|FS006 |Fields for Optical Archiving |
|FTCHECK |Foreign Trade: Import Simulation - Ctrl Fields for Pricing |
|FTEXTS |Communication Structure for Additional Components |
|FTGENERAL |Foreign Trade: General Fields Item |
|FUND_STRUC |Substructure Fonds |
|FVD_TZB0A |Append to TZBOA: Loans Fields |
|GLACCOUNT_CCODE |G/L Account Master Record: Company Code |
|GLACCOUNT_CCODE_DATA |G/L Account Master Record: Company Code - Data |
|GLACCOUNT_CCODE_INFO |G/L Account Master Record: Company Code - Information |
|GLACCOUNT_CCODE_KEY |G/L Account Master Record: Company Code - Key |
|GLX_ORG_INFO |Organizational Assignment |
|GMBSEGZ |Grants Management Add-on |
|GXXLT_H |XXL interface: horizontal features |
|GXXLT_O |XXL_interface: texts for online display |
|GXXLT_S |XXL interface: structure of the semantics table |
|GXXLT_V |XXL interface: vertical features |
|HELPVAL |Restrict Value Range - Transfer Table |
|HELP_INFO |Transfer Values for the Help Processor |
|HELP_VALUE |Structure or Function Module HELP_VALUE_GET_FOR_TABLE |
|HHM_COBL |Include for COBL from FM |
|IADDR_PSO |Local Authority Additional Fields (Address) |
|IBKPF_PSO |IS-PS: Include Structure BKPF Payment Request Doc.Header |
|ICDIND |Structures for generating change document update programs |
|ICON |Icons table |
|ICONS |Icons |
|ICURR |Interface for Currency Translation -
Query for Vendor Payment in SAP
Hello All,
I am a sap abap developer with little knowledge in SAP MM and SAP FI modules.
As per some requirement of my company ,i have created a PO then its GR and finally IR.
Now when i checked EKBE table (History per Purchasing Document) , i found two record in this table out of which one with
VGABE = 1 (Good Receipt) & another with VGABE = 2 (Invoice Receipt) .
Now my requirement is ,i want a entry in this table with VGABE = 5 (Payment) but i don't know how to do payment of vendor in sap so that this table will populate with a entry for payment type.
Please help me and let me know what will be the flow with tcodes to do the vendor payment in sap.
Please reply ASAP.
Thanks in advance.
Regards.
Abhinav Goel.Hello Mr.Raman,
Thanks for your response to my query.
As per my company requirement i have to track duplicate payment made to the vendor against same PO.
So for that after completing the cycle PR-PO-GR-IR-F-53 finally i found two records in BSAK table out of which :
One record was with my accounting document no from my invoice receipt of type RE.
Another record was with the vendor payment clearance document with type KZ.
Now again i have done payment to the vendor using F-53 tcode and now i found one more record with belnr = last payment document no and augbl = new payment document no. with type KZ.
So if i use below mentioned logic to track for duplicate payments made to the vendor ,then it will be fine or if not can you suggests me the needful changes in the logic.
1.) Check If record exists for my belnr no from invoice recipt in bsak.
2.) Take AUGBL No for this BELNR No and check if record exists for this AUGBL with type KZ.
Note:Means payment is done to the vendor upto this logic.
3.) Now if with the found record with type KZ any other record found with type KZ it can be taken of as duplicate payment made to the vendor.
Please suggest me if above mentioned logic is fine.
Regards.
Abhinav Goel. -
Hi All,
I have a requirement to enhance the vendor payment process by using BTE.I am using the P/S BTE 1030 for the same.
Can anyone guide me as to what is the field AUZZ3-AGZEI have any relationship with the other tables of the sample FM.
regards,
Priyanka
Date : 16th april 2007Hi,
The table which is mentioned we couldn't find in the system but anyhow the fiield which you have mentoned will have a rrealtion with the function module and with the tables mentioned below..
BSE_CLR Additional Data for Document Segment: Clearing Information
AGZEI Clearing Item
REGUP Processed items from payment program
AGZEI Clearing Item
BSEG Accounting Document Segment
AGZEI Clearing Item
Regards
Ravi Ganji -
BC Datasource for Vendor:Payment Transaction Master Data
Hi experts,
Is there a standard Business Content Datasource to extract the master data for fields that are visible in the Vendor: Payment Transactions screen?
I basically need data from tables LFBK, BNKA and I wanted to see if there was a way to do it without creating a custom datasource.
Also, how to you obtain the IBAN#. Clicking on it does not yield a technical name for what table and field it comes from.
Thanks.there is no such BC for vendor available but still you can check out 2LIS_02_S013, 0MM_PUR_VE_01
and 0MM_PUR_VE_02. They may help.
for me its good to go for a custom extractor with View based on those table. that will be quick and best.
Maybe you are looking for
-
Is there any known viruses on the 8900?
When using my phone the last 2 days, volume icon keeps going up & down which clips the conversation when I'm talking. Is this a virus or a software problem?
-
Multi - language dvd on appl tv
Dear Group do you know if it is possible to select differents languages on movies stored on apple TV? Thanks
-
Building a JSP which dynamically creates an HTML page with an included javascript file using <script LANGUAGE="JavaScript" type="text/javascript" src="myFile.js"></script> The problem is when I make changes in the file myFile.js, the changes are not
-
Not seeing DNG edits in quicklook and coverflow
I found another archived post about this that went unanswered a few years ago, so I'm asking again. Does anyone have any information on how to see edits to DNG files or edits from Adobe Camera Raw xml files in quicklook and coverflow? I'm trying to d
-
Revision: 3166 Author: [email protected] Date: 2008-09-10 10:16:47 -0700 (Wed, 10 Sep 2008) Log Message: integrate: AIK 20080905ap player 10.0.0.601 Modified Paths: flex/sdk/branches/3.0.x/in/air/mac/AIR Integration Kit.tbz2 flex/sdk/branches/3.0.x/i