Tables in CCMS Monitoring

Dears,
We are using ECC 6.04 .
In which we are planning to gererate a report daily that will fetch all CCMS monitoring data to get review of all system Monitoring daily.
For it I need to know the all table names,CCMD use to fetch data.
Please suggest the table names for it.
Regards,
Shivam Mittal

Similar Messages

Error in CCMS monitoring Batch job SAP_CCMS_MONI_BATCH_DP.

Hi All,
I am using a Sanbox system for CCMS Monitoring activities. I assigned a method CCMS_ONAlert_Email under auto reaction to the MTE class ABAP shortdumps on node System errors. So the requirement is when an alert triggered i have to receive an alert email. I just found there is an error in Batch job created for Alert monitoring, please find the error details mentioned below. Please let me know how to solve this error
Job started
Step 001 started (program RSAL_BATCH_TOOL_DISPATCHING, variant , user ID NBKIPXP)
:Exception CX_DBA_ADBC in class CL_DB6_RDI method GET_SNAPSHOT line 431
: Kernel Error ID:
: SYSID: ES1
: SY-SUBRC: 1208
: Message: ADBC error
: SQL statement: SELECT '20110613075617',0 as DB6PMCF_PARTITION,FS_NAM
: E,'T','20110521174003','700',FREE_KB,USED_KB,TOTAL_KB,NUM_IUSED,PCT_IU
: SED FROM SYSIBM.SYSDUMMY1, TABLE(SAPTOOLS.DB6PMCF('/db2/ES1/sapdata1')
: ) AS FS_CONFIG
: Database:
:caused by
:Exception CX_SQL_EXCEPTIONin class CL_SQL_RESULT_SET
: Kernel Error ID:
: DB Error: Yes
: SQL Code: 444-
: SQL Message: SQL0444N Routine "SAPTOOLS.DB6PMCF" (specific name "D
: B6PMCF") is implemented with code in library orpath "/usr/sap/ED2/SYS
: /exe/run/db6pmudf", function "Db6pmcf" which cannot be accessed. Reas
: on code: "4". SQLSTATE=42724
: DB Object Exists: No
: Duplicated Key: No
: Internal Error: 1
: Invalid Cursor: No
: Unknown Connection: No
: Connection Closed: No
Exception CX_DBA_ADBC in class CL_DB6_RDI method GET_SNAPSHOT line 431
:Exception CX_DBA_ADBC in class CL_DB6_RDI method GET_SNAPSHOT line 431
: Kernel Error ID:
: SYSID: ES1
: SY-SUBRC: 1208
: Message: ADBC error
: SQL statement: SELECT '20110613075633',0 as DB6PMCF_PARTITION,FS_NAM
: E,'T','20110521174003','700',FREE_KB,USED_KB,TOTAL_KB,NUM_IUSED,PCT_IU
: SED FROM SYSIBM.SYSDUMMY1, TABLE(SAPTOOLS.DB6PMCF('/db2/ES1/log_dir/NO
: DE0000/') ) AS FS_CONFIG
: Database:
:caused by
:Exception CX_SQL_EXCEPTION in class CL_SQL_RESULT_SET
: Kernel Error ID:
: DB Error: Yes
: SQL Code: 444-
: SQL Message: SQL0444N Routine "SAPTOOLS.DB6PMCF" (specific name "D
: B6PMCF") is implemented with code in library orpath "/usr/sap/ED2/SYS
: /exe/run/db6pmudf", function "Db6pmcf" which cannot be accessed. Reas
: on code: "4". SQLSTATE=42724
: DB Object Exists: No
: Duplicated Key: No
: Internal Error: 1
: Invalid Cursor: No
: Unknown Connection: No
: Connection Closed: No
Exception CX_DBA_ADBC in class CL_DB6_RDI method GET_SNAPSHOT line 431
:Exception CX_DBA_ADBC in class CL_DB6_RDI method GET_SNAPSHOT line 431
: Kernel Error ID:
: SYSID: ES1
: SY-SUBRC: 1208
: Message: ADBC error
: SQL statement: SELECT '20110613075633',0 as DB6PMCF_PARTITION,FS_NAM
: E,'T','20110521174003','700',FREE_KB,USED_KB,TOTAL_KB,NUM_IUSED,PCT_IU
: SED FROM SYSIBM.SYSDUMMY1, TABLE(SAPTOOLS.DB6PMCF('/db2/ES1/sapdata4/d
: b2es1/NODE0000/ES1/T0000003/C0000000.TMP') ) ASFS_CONFIG
: Database:
:caused by
:Exception CX_SQL_EXCEPTION in class CL_SQL_RESULT_SET
: Kernel Error ID:
: DB Error: Yes
: SQL Code: 444-
: SQL Message: SQL0444N Routine "SAPTOOLS.DB6PMCF" (specific name "D
: B6PMCF") is implemented with code in library orpath "/usr/sap/ED2/SYS
: /exe/run/db6pmudf", function "Db6pmcf" which cannot be accessed. Reas
: on code: "4". SQLSTATE=42724
: DB Object Exists: No
: Duplicated Key: No
: Internal Error: 1
: Invalid Cursor: No
: Unknown Connection: No
: Connection Closed: No
Exception CX_DBA_ADBC in class CL_DB6_RDI method GET_SNAPSHOT line 431
:Exception CX_DBA_ADBC in class CL_DB6_RDI method GET_SNAPSHOT line 431
: Kernel Error ID:
: SYSID: ES1
: SY-SUBRC: 1208
: Message: ADBC error
: SQL statement: SELECT '20110613075634',0 as DB6PMCF_PARTITION,FS_NAM
: E,'T','20110521174003','700',FREE_KB,USED_KB,TOTAL_KB,NUM_IUSED,PCT_IU
: SED FROM SYSIBM.SYSDUMMY1, TABLE(SAPTOOLS.DB6PMCF('/db2/ES1/sapdata2/d
: b2es1/NODE0000/ES1/T0000003/C0000001.TMP') ) ASFS_CONFIG
: Database:
:caused by
:Exception CX_SQL_EXCEPTION in class CL_SQL_RESULT_SET
: Kernel Error ID:
: DB Error: Yes
: SQL Code: 444-
: SQL Message: SQL0444N Routine "SAPTOOLS.DB6PMCF" (specific name "D
: B6PMCF") is implemented with code in library orpath "/usr/sap/ED2/SYS
: /exe/run/db6pmudf", function "Db6pmcf" which cannot be accessed. Reas
: on code: "4". SQLSTATE=42724
: DB Object Exists: No
: Duplicated Key: No
: Internal Error: 1
: Invalid Cursor: No
: Unknown Connection: No
: Connection Closed: No
Exception CX_DBA_ADBC in class CL_DB6_RDI method GET_SNAPSHOT line 431
:Exception CX_DBA_ADBC in class CL_DB6_RDI method GET_SNAPSHOT line 431
: Kernel Error ID:
: SYSID: ES1
: SY-SUBRC: 1208
: Message: ADBC error
: SQL statement: SELECT '20110613075634',0 as DB6PMCF_PARTITION,FS_NAM
: E,'T','20110521174003','700',FREE_KB,USED_KB,TOTAL_KB,NUM_IUSED,PCT_IU
: SED FROM SYSIBM.SYSDUMMY1, TABLE(SAPTOOLS.DB6PMCF('/db2/ES1/sapdata1/d
: b2es1/NODE0000/ES1/T0000003/C0000002.TMP') ) ASFS_CONFIG
: Database:
:caused by
:Exception CX_SQL_EXCEPTION in class CL_SQL_RESULT_SET
: Kernel Error ID:
: DB Error: Yes
: SQL Code: 444-
: SQL Message: SQL0444N Routine "SAPTOOLS.DB6PMCF" (specific name "D
: B6PMCF") is implemented with code in library orpath "/usr/sap/ED2/SYS
: /exe/run/db6pmudf", function "Db6pmcf" which cannot be accessed. Reas
: on code: "4". SQLSTATE=42724
: DB Object Exists: No
: Duplicated Key: No
: Internal Error: 1
: Invalid Cursor: No
: Unknown Connection: No
: Connection Closed: No
Exception CX_DBA_ADBC in class CL_DB6_RDI method GET_SNAPSHOT line 431
:Exception CX_DBA_ADBC in class CL_DB6_RDI method GET_SNAPSHOT line 431
: Kernel Error ID:
: SYSID: ES1
: SY-SUBRC: 1208
: Message: ADBC error
: SQL statement: SELECT '20110613075634',0 as DB6PMCF_PARTITION,FS_NAM
: E,'T','20110521174003','700',FREE_KB,USED_KB,TOTAL_KB,NUM_IUSED,PCT_IU
: SED FROM SYSIBM.SYSDUMMY1, TABLE(SAPTOOLS.DB6PMCF('/db2/ES1/sapdata3/d
: b2es1/NODE0000/ES1/T0000003/C0000003.TMP') ) ASFS_CONFIG
: Database:
:caused by
:Exception CX_SQL_EXCEPTION in class CL_SQL_RESULT_SET
: Kernel Error ID:
: DB Error: Yes
: SQL Code: 444-
: SQL Message: SQL0444N Routine "SAPTOOLS.DB6PMCF" (specific name "D
: B6PMCF") is implemented with code in library orpath "/usr/sap/ED2/SYS
: /exe/run/db6pmudf", function "Db6pmcf" which cannot be accessed. Reas
: on code: "4". SQLSTATE=42724
: DB Object Exists: No
: Duplicated Key: No
: Internal Error: 1
: Invalid Cursor: No
: Unknown Connection: No
: Connection Closed: No
Exception CX_DBA_ADBC in class CL_DB6_RDI method GET_SNAPSHOT line 431
:Exception CX_DBA_ADBC in class CL_DB6_RDI method GET_SNAPSHOT line 431
: Kernel Error ID:
: SYSID: ES1
: SY-SUBRC: 1208
: Message: ADBC error
: SQL statement: SELECT '20110613075634',0 as DB6PMCF_PARTITION,FS_NAM
: E,'T','20110521174003','700',FREE_KB,USED_KB,TOTAL_KB,NUM_IUSED,PCT_IU
: SED FROM SYSIBM.SYSDUMMY1, TABLE(SAPTOOLS.DB6PMCF('/db2/ES1/sapdata3/d
: b2es1/NODE0000/ES1/T0000004/C0000003.UTM') ) ASFS_CONFIG
: Database:
:caused by
:Exception CX_SQL_EXCEPTION in class CL_SQL_RESULT_SET
: Kernel Error ID:
: DB Error: Yes
: SQL Code: 444-
: SQL Message: SQL0444N Routine "SAPTOOLS.DB6PMCF" (specific name "D
: B6PMCF") is implemented with code in library orpath "/usr/sap/ED2/SYS
: /exe/run/db6pmudf", function "Db6pmcf" which cannot be accessed. Reas
: on code: "4". SQLSTATE=42724
: DB Object Exists: No
: Duplicated Key: No
: Internal Error: 1
: Invalid Cursor: No
: Unknown Connection: No
: Connection Closed: No
Exception CX_DBA_ADBC in class CL_DB6_RDI method GET_SNAPSHOT line 431
:Exception CX_DBA_ADBC in class CL_DB6_RDI method GET_SNAPSHOT line 431
: Kernel Error ID:
SYSID: ES1
SY-SUBRC: 1208
Message: ADBC error
SQL statement: SELECT '20110613075634',0 as DB6PMCF_PARTITION,FS_NAM
E,'T','20110521174003','700',FREE_KB,USED_KB,TOTAL_KB,NUM_IUSED,PCT_IU
SED FROM SYSIBM.SYSDUMMY1, TABLE(SAPTOOLS.DB6PMCF('/db2/ES1/sapdata4/d
b2es1/NODE0000/ES1/T0000004/C0000000.UTM') ) ASFS_CONFIG
Database:
caused by
Exception CX_SQL_EXCEPTION in class CL_SQL_RESULT_SET
Kernel Error ID:
DB Error: Yes
SQL Code: 444-
SQL Message: SQL0444N Routine "SAPTOOLS.DB6PMCF" (specific name "D
B6PMCF") is implemented with code in library orpath "/usr/sap/ED2/SYS
/exe/run/db6pmudf", function "Db6pmcf" which cannot be accessed. Reas
on code: "4". SQLSTATE=42724
DB Object Exists: No
Duplicated Key: No
Internal Error: 1
Invalid Cursor: No
Unknown Connection: No
Connection Closed: No
xception CX_DBA_ADBC in class CL_DB6_RDI method GET_SNAPSHOT line 431
Exception CX_DBA_ADBC in class CL_DB6_RDI method GET_SNAPSHOT line 431
Kernel Error ID:
SYSID: ES1
SY-SUBRC: 1208
Message: ADBC error
SQL statement: SELECT '20110613075634',0 as DB6PMCF_PARTITION,FS_NAM
E,'T','20110521174003','700',FREE_KB,USED_KB,TOTAL_KB,NUM_IUSED,PCT_IU
: SED FROM SYSIBM.SYSDUMMY1, TABLE(SAPTOOLS.DB6PMCF('/db2/ES1/sapdata2/d
: b2es1/NODE0000/ES1/T0000004/C0000001.UTM') ) ASFS_CONFIG
: Database:
:caused by
:Exception CX_SQL_EXCEPTION in class CL_SQL_RESULT_SET
: Kernel Error ID:
: DB Error: Yes
: SQL Code: 444-
: SQL Message: SQL0444N Routine "SAPTOOLS.DB6PMCF" (specific name "D
: B6PMCF") is implemented with code in library orpath "/usr/sap/ED2/SYS
: /exe/run/db6pmudf", function "Db6pmcf" which cannot be accessed. Reas
: on code: "4". SQLSTATE=42724
: DB Object Exists: No
: Duplicated Key: No
: Internal Error: 1
: Invalid Cursor: No
: Unknown Connection: No
: Connection Closed: No
Exception CX_DBA_ADBC in class CL_DB6_RDI method GET_SNAPSHOT line 431
:Exception CX_DBA_ADBC in class CL_DB6_RDI method GET_SNAPSHOT line 431
: Kernel Error ID:
: SYSID: ES1
: SY-SUBRC: 1208
: Message: ADBC error
: SQL statement: SELECT '20110613075634',0 as DB6PMCF_PARTITION,FS_NAM
: E,'T','20110521174003','700',FREE_KB,USED_KB,TOTAL_KB,NUM_IUSED,PCT_IU
: SED FROM SYSIBM.SYSDUMMY1, TABLE(SAPTOOLS.DB6PMCF('/db2/ES1/sapdata1/d
: b2es1/NODE0000/ES1/T0000004/C0000002.UTM') ) ASFS_CONFIG
: Database:
:caused by
:Exception CX_SQL_EXCEPTION in class CL_SQL_RESULT_SET
: Kernel Error ID:
: DB Error: Yes
: SQL Code: 444-
: SQL Message: SQL0444N Routine "SAPTOOLS.DB6PMCF" (specific name "D
: B6PMCF") is implemented with code in library orpath "/usr/sap/ED2/SYS
: /exe/run/db6pmudf", function "Db6pmcf" which cannot be accessed. Reas
: on code: "4". SQLSTATE=42724
: DB Object Exists: No
: Duplicated Key: No
: Internal Error: 1
: Invalid Cursor: No
: Unknown Connection: No
: Connection Closed: No
Exception CX_DBA_ADBC in class CL_DB6_RDI method GET_SNAPSHOT line 431
Job finished

Hi Dinesh,
Please check the note is applicable for you [Note 978319 - DB6: Incorrectly cataloged table functions|https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=978319]
so please check wheter db2<sid>user has enough permission
Thanks,
Jansi

CCMS monitoring

Hello,
We want to configure CCMS monitoring for one our systems.
But we don't want to configure CEN using Solution manager.
After searching, I found that every source describes the process for configuring CCMS using CEN.
I know that we can configure CCMS on individual systems also. But I am unable to find the right set of steps for it.
Any help would be appreciated.
Thanks.

To configure CCMS on the single system (not as CEN) Please follow the steps below.
1. Got to RZ20
2. Select "SAP CCMS Monitor Templates"
3. Drill down the MTE which you need to monitor and select that.
like to monitor table space:
SAP CCMS Monitor Templates->Database->Oracle->Space Management-> table space name->used space
4. click on properties
5. assign the autoreaction method which you already copied from CCMS_OnAlert_Email
you would need to provide the info in autoreaction method before assigning it to any MTE like email distribution list, sender user id and releasing this method as autoreaction.
Email distribution list should be created in SBWP in client 000, send user id should also be created in client 000 and email should be configured in client 000 under SCOT transaction for auto reaction method working properly.
Thanks,
Best Regards,
Prabhat Sharma

CCMS monitoring a remote server on a ditributed system that is not an R3 in

CCMS monitoring of a remote server using RFC-SAPOSCOL on a distributed system that is not an R3 install but just an DB server. Has anyone any idea how to set this up? I've read SAP note that refer to it and where to download the files but nothing on how to set it up.
Sorry to make that clear we have a distributed system with a SAP CI on one server and a SQL DB on the other. I would like to monitor the os through CCMS on the DB server.
Message was edited by:
        Chris Soden
Message was edited by:
        Chris Soden

Thanks Gary,
I haven't seen this no where would I find it. Had a quick look on the market place and can't find it!
Chris
Just to add were using Netweaver 2004s
Message was edited by:
        Chris Soden

File Systems are not shown in CCMS Monitoring

Hi Gurus,
We have installed all SAP components in Solaris 10 zones including Solution Manager.
Solaris File Systems are not shown in CCMS Monitoring under FileSystem. It looks like SAPOSCOL is not sending the OS data to CCMS. It does not show file systems in OS06 also.
The probles exists on Systems runnig in Solaris 10 zones only and NOT on systems running on individual Servers. [without Solaris zones]
Thanks,
Pj

Hi,
You need take some special considerations while installing SOLMAN on SOLARIS 10 zones. Check these notes
Note 870652 - Installation of SAP in a Solaris 10 zone
Note 724713 - parameter settings for Solaris 10
Hope this will solve your problem.
--Ragu

CCMS monitoring for adapter engine

Hi,
We have configured CCMS monitoring for Adapter Engine for our client.
In RZ20 im able to see the alerts come up,with the default data that the system provides.
1. I need to send a mail when the alert is triggerred, but if I try to set the autoreaction method, it is greyed out and I get a info saying that the adpter engine node cannot be changed. How do I get over this?
2. Incase im able to set the autoreaction method , I want to send additional information like communication channel name etc in the alert message. How can I change the text in the alert email?
Thanks
Shakthi

Hello!
Please check the blog entry below
Configuration for forwarding Alerts as Emails
Configuration for forwarding Alerts as Emails

Missing "SAP XI Adapter engine" in CCMS Monitor

Dear all,
we try to configure PI CCMS monitor but we can't find the subtree "SAP XI Adapter engine " in Visual admin.
In detail:
the subtree "SAP XI Adapter engine "is not displayed in Visual administrato under
server->service->monitoring->Monitor tree ->Root application .
So we have set to true the value "CCMSEnabled" of seervice "SAP XI AF core" , and we have restarted the instance.
After the restart i DO NOT find the "SAP XI Adapter engine " in
SAP NetWeaver Administrator,
'System Management' -> 'Monitoring' -> 'Java System Reports' -> 'Reports'. From the dropdown list 'Report' choose 'Monitor Browser', and display all monitors
So I can't activate the monitor.
and if the subtree is not present , i can't see the MTE in "SAP XI Adapter engine " RZ20.
Additional info:
- In RZ20 I have my system under SAP J2ee Monitor template->All system
but the MTE "J2EE Applications" is grayed.
- In file application.xml under /usr/sap/ccms/XIT_10/j2ee<server0> i do not find the tag:
<app name="application sap.com/com.sap.aii.af.app">
<node>\XIT\XIT 10 Appl .... sp30t0\SAP XI Adapter Engine</node>
</app>
I think this is the correct procedure that we have done in other different landscape whithout problems.
Is there something else to check ?
I've alredy checked following Blogs
/people/sap.user72/blog/2005/11/24/xi-configuring-ccms-monitoring-for-xi-part-i
/people/sap.user72/blog/2005/12/05/xi-grmg-customizing-for-xi-ccms-heartbeat-monitoring-part-ii
Thanks in advance
Steven

Hi Sekhar,
I am using PI 7.0 instead so I have followed the instruction in (http://help.sap.com/saphelp_nw70/helpdata/en/e5/5d1741b393f26fe10000000a1550b0/frameset.htm) instead.
The problem is, Adapter Engine is still not listed as one of the application avaialble for Monitoring in Visual Admin even though the SAP XI AF Core has definitely been set with CCMSEnabled = true.
Any further suggestions?
Thanks,
Wi

Content Tables in CCM 2.0

Hi guys,
Can anyone indicate in which tables in CCM 2.0 the content is stored for:
Supplier catalogs
Product Catalogs
Contract catalogs
We installed CCM 2.0 in the same client as SRM 5.0
Thanks,
Aart

Hi,
Here are the table which i have seen.
/CCM/D_CTLG                        Catalog Header
/ccm/d_schm                          Schema header
/CCM/D_CTY_ITMAP               Category Mapping of an Item
/CCM/D_ITM                            Catalog Item Header Data
/CCM/D_ITM_H                        History of Catalog Item Hea
/CCM/D_ITM_ITM_R                 Catalog Item - Catalog Item
Cheers, Renga

CCMS monitoring of SRM's own XI integration engine

I have CCMS problems when monitoring XI integration engine of a SRM system. The integration engine will not appear in CCMS. I opened a question on SRM solution forum, could somebody have a look at it there. Here is the link to original question and earn your points there:
CCMS monitoring of SRM's own XI integration engine
background: I have previously managed to successfully set up CCMS monitoring for a plain XI system, but there seem to be some difference while SRM's XI only has integration engine and not J2EE engine running. SRM XI Integration engine is in place due to ABAP Proxies used by SRM.
best regards,
Kimmo

You have to follow the note <a href="https://websmp110.sap-ag.de/~form/handler?_APP=00200682500000002442&_EVENT=DISPLAY&_OBJECT=012006153200000552232003&_NNUM=634771&_NLANG=EN">634771</a>
and following this document <a href="https://websmp110.sap-ag.de/~sapdownload/011000358700004422742005E/XIMonitoringHowTo_01aSR.pdf">How To Monitor Exchange Infrastructure 3.0</a> pay attention to page 34, for the use of a Central Monitoring (CEN) System.
Of course you have to adjust the GRMG in order to have only the ABAP part under monitor.
Best Regards

Cannot see CCMS Monitor Templates - System is not configured

I just finished installing SAP Netweaver Trial, and I have been able to login using the SAP* and DDIC accounts.
I can see the standard tree via the SAP client GUI.
I am trying to take a look at the CCMS Monitor Sets, and I can see the standard collection of "Entire System", "Performance Overview", etc. all fine.
However, when I double-click to load any of the monitors, I see nothing inside.
No sub-trees, nothing.
I enabled "Display error nodes" and see a node that says
"NSP : System is not configured"
I have tried creating my own user, adding in profiles like SAP_ALL, S_A.System, etc.
I also notice everytime I access the CCMS Monitor Templates, there is an entry in the Syslog:
Severity: Warning
Process Type: D0
Transaction Code: RZ20
Client: 001
User: DDIC
Message ID: BYE
Description:
Database: Invalid parameter ObjTooLar transferred to database interface
Please let me know if I am missing any components, or if there is something I need to do.
Thank you.

Thanks Sunny.
That thread did indeed helped me to resolve the issue.
However, the thread did not really provide clear instructions to complete newbies like me.
For those who also have the same issue, this is what I did:
1. Execute RZ10 (Edit Profiles) via the SAP client GUI
2. Click on the menu Utilities - Import profiles - Of active servers
3. Edit the "Instance Profile" NSP_DVEBMGS00_{Your Computer Name}
Select Extended Maintenance, and select Change
4. Change the following two parameters:
alert/MONI_SEGM_SIZE from 0 to 60000000
rdisp/autoabaptime from 0 to 300
5. In the SAP MMC, right-click on NSP and select Restart
6. After restarting, login and you should be able to see the CCMS Monitor Template nodes

CCMS monitoring alerts

Hi Experts,
I need to install and configure CCMS Monitoring alerts.I don't have idea about CCMS, please help me for this and give me any links or docs.
In my Landscape we have 4 SAP systems.
1. SAP CRM7.0 EHP2
2.SAP ECC6 EHP5
3.NET WEAVER 7.3 EHP1
4.SAP SRM7.0 EHP2
Thanks
Jana

Hi Jana,
Please see link:
http://help.sap.com/saphelp_crm700_ehp03/helpdata/en/49/2d927507361903e10000000a42189c/frameset.htm
Normaly CCMS alrts are set as default. If it is not activated please see as well note 1827820 which might have been applied in your system.
Best regards - Christophe

CCMS Monitoring Sets in SAP Netweaver ABAP 7.01 Trial

Hi community,
I have successfully installed the trial in the subject but I can't see the alerts in transaction rz20 under CCMS Monitoring Templates. If I click on a node the message "No alerts data exists" appears in the status bar
I am not an expert of these functionalities, but I suspect that they have been disabled in this trial edition. Am I right, or I have to do some post actions to activate it?
Thanks, Valerio

Hi,
this is true, but these are disabled (in gray color) and the alert tree is empty, because these graphical icons reflect the status of monitoring alerts.
I found that parameter alert/MONI_SEGM_SIZE was set to 0 in the instance profile
By setting it to 40000000 (minimun value) now I can see the alerts in SAP MMC and the tree of alerts is full.
Unfortunately if I go in transaction RZ20 i see nothing as before...
Regars,
Valerio

CCMS monitor, BPE is red

In CCMS monitoring RZ20, the node XI_system Business Process Engine -> Overall status -> Status of the automatic customizing is red. The text is BPE customizing not fully maintained.
When clicking this text, an information page is shown, and you can go directly to Automatic Workflow Customizing to Perform Automatic Workflow Customizing. Here, all the steps are green! A few days ago I had to manually execute the job scheduling for Packaging and Reorganization. They where grey before I did this. But now, they are all green.
So why is the status red in the CCMS monitoring?
BTW: The nodes Runtime -> Process scheduling -> Status of automatic clean up and Status of container definition buffer are also red!
Anyone with a suggestion of what the problem could be?
Edited by: Rune Johansen on Aug 19, 2008 2:39 PM
Edited by: Rune Johansen on Aug 19, 2008 2:41 PM

Hey Rune, how are you dude... long time no hear.. how are those shoelaces.
Let me just get your issue straight... your issue is in the CCMS monitor itself?
Becuase two things here:
1: I am sure there are two views... as in one with current alerts and one with previous alerts. (Open Alerts and Current Status). Check which one you are in...
2: When an error is solved I think you have to update it manually...
I am just taking a stab at this since it is a while since I last worked with CCMS...
Could any of these be your issue?
Edited by: Alex on Aug 19, 2008 4:05 PM

CCMS monitoring configuration

Hello,
I am trying to configure CCMS monitoring in Solution Manager. However I am unable to find any documents to guide me through the process. kindly help.
Thanks.

Hi
Please use the standard Monitoring Setup Guide, for CCMS Configuration of Solution Manager.
Just keep in mind, that Solution Manager will be then your CEN (central monitoring) system. And other satellite system will be Monitored system.
Refer to guide available @
https://service.sap.com/operationsnw70 > Monitoring > Monitoring Setup Guide SP15.
I hope this will help. Please revert for further details.
Best Regards,
Pradeep Bishnoi

Ccms monitoring single definition under and MTE class

Hi Guys
For CCMS monitoring under RZ20 i am looking for a way to define a node that allow me to monitor a specific definition for those mte that dinamically create those definitions from the source system, for instance
if you select MTE class: filesystem you get the list of all the filesystems, like
/db2/SM1/sapdata1
/db2/SM1/sapdata2
/var
So lets says I just want to monitor /db2/SM1/sapdata1 and not to display the rest of the filesystems on RZ20
is there a way to configure this? maybe using some kind of filter for the name.
I want to configure this for the j2ee connector service but i get a buch of connector Applications RZ20 and I just want to monitor one of those Applications
Thanks for your help.

Thanks for this good document but I think it is not enough for me. I had registered the sapccmsr agent with J2EE option but it is not monitor the database correctly on the same physical server. In the Monitoring node of server process in Visual Admin i can't find a relevant object to activate database free space monitoring. In posted document I can't find the detailed information, too. Please provide me with a detailed specific information. Many thanks.
Which service is relevant to collect database relevant data to monitor non ABAP databases like single J2EE instances oder non-SAP Databases.
Edited by: Rene Schulz on Nov 19, 2008 3:16 PM

Tables in CCMS Monitoring

Similar Messages

Maybe you are looking for