Tables in controlling
hi
i want to develop a report in controlling for cost center's. In which table i can get the total amount posted to a cost center group (both actual and planned values).
We can take standard report available in SAP (S_ALR_87013611) as a base for developing new report. If it is possible then on what basis we have to do.
one more thing what is meant by structures ,how they are useful and where we can see this structures (T.CODE).
1st dissolve your cost centrer groups
wtih a fm (search for setdissolve*)
and use table cosp
regds
Andreas
Similar Messages
-
How to put scrol bar in table viw control in module pool programming
how to put scrool bar in table-view control in module pool programming
Hi Rani,
You need not insert Scrollbar in the table control, it appears automcatically once the amount of data vertical or horizontal limit of table control.
Regards,
Sathish
Note : Reward useful Answers -
Input field in a table view control
Hi,
I have a table view control, with input field in one of the columns.
That is meant for entering some values.
My problem is when i am entering a 3 input field with value and then by using mouse control i enter say 20th input field with value. After that when i use the directional keys to enter the 21st field, the cursor is not in 21st field, it is somewhere else.
How to correct this problem.
Regards,
VijayalakshmiHi,
Try to use the TABINDEX property of <input>.
Best regards,
Guillaume -
Total sum to be displayed in a table view control ?
Hi,
I am unable to display the total sum of a column in a table view control( using HTMLB ). How should one display the sum of a column ?
THanks in advance,
VaraPrasadHi,
it should work once you are restricting the capacity of the out put port then it should provide that much rows only otherwise its a Bug.
Alternativily you are tellin to disaply using sorting then add a Sort operator to the output port and the display ur output port in down order.
But first option should work just check it again.
On which SP u r working?
Regards,
Govindu -
To display Total sum of a column in a table view control ?
Hi,
I am unable to display the sum of a column in a table view control ( using HTMLB ). How should one display the sum of a column in a table view control ?
Thanks in advance.
Vara.Hi there, do a search in this forum for TableView Iterator. Then check out these weblogs:
/people/thomas.jung3/blog/2004/09/15/bsp-150-a-developer146s-journal-part-xi--table-view-iterators
/people/brian.mckellar/blog/2003/10/31/bsp-programming-htmlb-tableview-iterator
An Iterator is the way to go for you -
TABLE VIEW CONTROL IN MODULE POOL PROGRAMMING
Hai Friends,
<b>My problem is i design table view control using se51. I entered the data on table view and when i press ENTER button on keyboard the total data is disapears from the screec(i.e table view).
but i do not want this functionality. when i press ENTER button on keyboard that data is must be on the screen only.....................
please tell me how it is possible
</b>Hello,
Fill the data of the table control in PBO event of the screen.
CHeck this sample report:
DEMO_DYNPRO_TABCONT_LOOP
Vasanth -
Table view control problem in screen painter
Hi All,
i am unable to display the contents in the table view control in screen painter....actually i have created two screen one to take input and second to display details on next screen in table view control..but i m nt getting that details...
my second screen PBO/PAI code is
PROCESS BEFORE OUTPUT.
loop at itab with control TCNTRL CURSOR tcntrl-current_line.
MODULE STATUS_0101.
endloop.
PROCESS AFTER INPUT.
loop at itab.
endloop.
MODULE USER_COMMAND_0101.
can anyone solve my problem????????
Thanks,
JayshreeHi,
Use below approch (syntax may not be correct as I have typed it in notepad but use it as guide line)
***In screen flow logic
PROCESS AFTER INPUT.
module cancel at exit-command.
chain.
field: zproject_details-originator,
zproject_details-proj_type.
module check_data on chain-request.
endchain.
module user_command_002.
***In abap code
module cancel input.
leave program.
endmodule.
module check_data input.
if zproject_details-originator is initial.
message exxxx "throw error message here
endif.
if zproject_details-proj_type is initial.
message exxxx "throw error message here
endif.
endmodule.
module user_command_002.
save_ok = ok_code. "good practice to save okcode
clear ok_code.
case save_ok.
when 'save' " using constant for fcode here is better
perform save_data. "make it moduler instead of writing whole code in case statement
enscase.
endmodule.
form save_data.
** do some additional checks if required before saving
update zproject_details from zproject_details. " update database table here from work area contents
endform.
Regards,
Vishal -
Table wizard control in screen painter
hi
while v r creating table wizard control fields r getting enabled and displayed in table wizard control..only mandt field z shown.no other fields r shown in that..Kota ,
When you are trying with WIZARD for table control, In the seq, step it will ask you for DDIC table name OR from PROGRAM with Internal table and corresponding workarea. Try to do proper selection and assign correct values it willl give the correct definition.
Thx
Parthi
Note : Reward points if helpful. -
WHATS THE USE OF TABLE STRIP CONTROL AND TABLE VIEW CONTROL
WHATS THE USE OF TABLE STRIP CONTROL AND TABLE VIEW CONTROL
Subhash,
You create and distribute a model in BD64. The details of that are stored in this tables.
A model gives you the details of the sender / receiving systems and what are the message types that are getting transferred between these systems.
Regarding the IDOC segments issue, can you explaing how are you triggering the IDOC and which message / idoc type you are dealing with.
Regards,
Ravi
Note :Please mark the helpful answers
Message was edited by: Ravikumar Allampallam -
What table storing controlling area from C.Element, wbs group?
Hi All,
Greeting.
In my project right now, I need to bring over data Cost Element Group and WBS Group to BW.
In order to cater this, I fetch data up from setHeader and setLeaf tables.
My Question is how to get information about controlling area that belong to those object, because when I see org. unit field on the table (setHeader table), it's populated with different value with controlling area that I see on their t-code (KAH3 and KJH3).
Is that any table storing controlling area seen on t-code: KAH3 and KJH3 ?
Really need your help.
Thanks a lot and have a good day,
Best regards,
Daniel N.Hi Daniel,
It does not work this way. If you want to extract the controlling area of the obejcts you have to go to the relevant tables of the master data, e.g. for cost elements - CSKB, WBS - PRPS, etc.
Regards,
Eli -
Help Needed regarding to Table View Control
Hi Abapers
In Table View Control which property or system variable keeps the user selected row's row id.
Situation is that user enters many records into sales details table view. Table view contains the fields, productid product no qty discount and rate. Suppose user wants to delete one particular record(sales details) from that table view while entering this sales details .here i want to know which is that particular row that the user selected. Table views which property keeps this row no information. i am very glad if you people give me more information abount table View Controls .
With regards
Anoop.Hello Anoop,
post your questions in the correct forums and you can hope to get a better answer. This forum as you see is the suggestions and comments forum and not the ABAP forum.
Sameer -
Help Needed on Table View Control
Hi Abapers
In Table View Control which property or system variable keeps the user selected row's row id.
Situation is that user enters many records into sales details table view. Table view contains the fields, productid product no qty discount and rate. Suppose user wants to delete one particular record(sales details) from that table view while entering this sales details .here i want to know which is that particular row that the user selected. Table views which property keeps this row no information. i am very glad if you people give me more information abount table View Controls .
With regards
Anoop.You would have to use the outbound plugs to transfer data from your component to the other component. Here you have a parameter IV_DATA_COLLECTION. Fill the entries you want to fill here.
Check the Sold to Party pop up while creating Quotation for Sales cycle when you log in with SALESPRO.
Regards
Kavindra
Edited by: joshi_kavindra on Nov 23, 2011 5:03 PM -
How to create tables for control data
HI
How to create tables for controls of types of data (screen control)? what is the process for this
Regards,
AnilWell, do you want to do it the easy way? If so, then just create a table maintenance program. You can do this via SE11, utilites, table maintenance generator. The table maintenance will be generated and you can then maintain the table via SM30.
If you want to go the more challenging way, you can write your own table maintenance program using a table control on your screen. You can use the table control wizard to help you along.
Regards,
Rich Heilman -
Get selected row values from Table view control
Hi ,
I am using transaction ME23N, would like to access row values from item table for selected row. I have written a script as in screen shot and its giving me error at java script step two. I want to get the PR number from item table for selected row.
With Regards
Vishal LokapurH Vishal,
Can you please share how you were able to resolve the issue regarding the selected row
in case of a table control .
Regards -
How to delete a single data from table using control file
I want delete a single row data from table using sql loder control file
Edited by: 977940 on Dec 19, 2012 9:00 PM977940 wrote:
I want delete a single row data from table using sql loder control file
Edited by: 977940 on Dec 19, 2012 9:00 PMWhy?
And how do you imagine this happening with sqlloader?
The entire purpose of sqlloader is to load data (hence, the name sql*loader*) into a table from an external source. If you want to delete rows from a table, you use the sql DELETE statement.
What is the business problem you are trying to solve? -
Data not viewable in table using Control file CharacterSet AL32UTF8
i have a flat file which contains Chinese characters and English Characters
I have to create a control file, to insert the data in this flat file to the Table
The characterset i am using in my control file is AL32UTF8
When i use this characterset the data is getting loaded into the table,but i am not able to view the Chinese characters.
i am able to see some Upside down question mark symbol
Please help me of how to view the chinese characters into the table
Is that any other characterset i have to set in Control fileNLS_LANG is an environment variable. I'm assuming you're on Windows, so it's probably something like
Control Panel | System | Advanced | Environment Variables
Given that you're using Toad, though, there may be someplace there where you set the character set. There is a discussion on Eddie Awad's blog on how various tools can be made to display Unicode data
http://awads.net/wp/2006/07/06/sql-developer-and-utf8/
Some of the comments discuss Toad, though that's not a tool I'm familiar with.
If you happen to be able to use iSQL*Plus, since that's browser based, it supports unicode natively. That's often the easiest solution.
Justin
Maybe you are looking for
-
What has happened to the essence to what a phone w...
I have been meaning to discuss this for monthsand have never got around to it. The normal land line phone work 100 percent of the time you pick it up and it works you make calls from it and you put it down when your finished. The mobile phone has los
-
How to pass a form value as a url parameter??
I have following form and I want to pass the selected value of the drop down choice in as one of the parameter in the URL. How can I do that ?? something like proposalid that I have done in the url, I want to pass the selected value of the variable d
-
Will my friend be able to use voice to text on her iphone 4 after upgrading to IOS 5?
My friend thought she would have the ability to use voice to text message on her 4 after upgrading to IOS 5. Will she be able to?
-
30 GB recognized by itunes, new 80 GB locks up itunes...help please
i have a 30 gb video ipod, works great no problems at all. i connect it to my computer and it connects with itunes just fine. ive downloaded the updates, and everything is perfect. i got a new 80 GB video ipod, and i try and connect it to itunes, my
-
Hi Can I stream content from my macbook pro to my Apple tv3 using a cable connection?, I dont want to use wifi Regards