Tables in CRM- Sales Area Data

Hi,
We have downloaded the Customer Master from R/3 to CRM system. Initial Load was successful and delta is also working fine. We are getting the R/3 sales area data in CRM system when we open a BP.
But here our issue is, we could not locate the sales area data in any of these below CRM tables -
CRMD_ORGMAN
CRMM_BUT_FRG0081
CRMM_BUT_FRG0080
This data we require for BW purpose, Can anyone help me where I can get this data?
The Bdocs coming from R/3 to CRM contains complete sales area data.
Thanks&regards,
kalyan

It depends on the tab you have maintained for sales area.
CRMM_BUT_LNK0011 holds the sales area data for the sales tab on the screen.
CRMM_BUT_LNK0021 holds the sales area data if the shipping tab is maintained.
Similarly if the billing tab is maintained, you ll find the data within the CRMM_BUT_LNK0031 table.
I hope this helps.
Regards,
Gaurav Gera

Similar Messages

Business Partner - CRM Sales Area Data disabled

Hi Experts,
Facing a small problem in Business Partner screen.
I have created a Sold-to-Party role and when i go to the Sales Area Data
data set, i should be able to Choose Sales Area for determining the Sales Org and Distribution Channel. But the Button Choose Sales Area
is not enabled. Kindly help me out in Enabling this button so that i can choose Sales Area and determine the Sales Org and Distribution Channel.
Thanks
Shiva

Hi,
1. Go to transaction sm30
2. Open T77OMATTR in display mode.
3. Select SALE and go to Attributes/Scenarios.
4. Now go to the detail of attributes IS_SA_GRP, IS_SA_OFF and
IS_SA_ORG.
There you will see that Flag is not checked for 'Simulated'. For
Enhanced model it should be checked. Check the checkbox for all the
three attributes and then run the report
HRBCI_ATTRIBUTES_BUFFER_UPDATE.
Smita.

Need to know how to extract those Sold to Party with sales area data

Hi,
As in our system i need to check that for all
sold to party existings , who are all the having the sales area data.
how can i able to pull those Sold to Party that does not having sales area data.
I know that the data is huge , but canot help because some of the Sold to Party maintained in CRM is without sales area data.
I want to know that if the numbers ar ehuge it can be a customizing problem.
Waiting for your reply
Thanks & Regards
Prajith P

Hi Prajith,
Refer to the link, might help u in getting the BP's with sales area.
Tables in CRM- Sales Area Data
Hope this helps!!!
Prerna

Unable to see the sales area data while creating BP

i am working on ides while creating BP data set (Sales area)is in not visible i am unable maintain the sales area deatils ( shiping and billing relevant data .etc).
could some help me how to retrive the sales area data
thanks in advance
Swamy

Hi Kumar,
In that case I recommend you to check the view V_TBZJ1 in transaction SM30 and see whether the line
Subheader Screen text Description Appl. Scrn.seq.cat.
CRM001 Sales area data CRM CRM1 CRM001
exist or not if not then pls maintain it.
Also check the view V_TBZJ1C for the lines below
Subheader Description Item number Active
CRM001 CRM:Sales area data 2 X
If this also not exist then maintain it.
After this you will be able to see sales area tab when you will create the BP in role SP.
Allot points if my post helps!!
Best regards,
Vikash.

Function module to read sales area data of a Business partner

Hi,
Could anyone please tell me if there is a functio module to read the sales area data of a business partner.
Also, what tables contain the sales area data of a BP.
Thanks,
Sahil

Hi Gregor,
I was basically looking for a function module that would give me the details on the Billing Tab from the BP Sales area data.
we can use BAPI_BUPA_FRG0030_GETDETAIL function module to retreive that data.
Thanks,
Sahil
Message was edited by: sahil gupta

Product sales area data missing in crm

hi, expert
I'm currently having a problem with some of the products that are being replicated from R/3 to CRM.Product sales data initial synchronization is complete from ecc to r3,user create order is ok in crm.After a period of time,product sales area data missing in crm,we don't know when is lost,the problem is that we can't do an order for several products because there's no data in the sales and distribution tab(Sales Org., Distribution Channel) of the product master in CRM.

Hi ,
What you can do is,
Create a request for a material whose Sales Area data is missing in
CRM , and perform the request load in transaction:R3AR4.
And please check whether sales area data flows to CRM.
Put a filter in txn:R3AC1, to download single material or material
range.And before performing an initial load in txn:R3AS,please make
sure that sales area data is missing in CRM.Now, perform the initial
load in txn:R3AS.And please check whether sales area data flows to
CRM.
Check the filter settings in transaction R3AC1 for
object MATERIAL and please make sure that it would bring down all
the expected materials from R/3 along with the sales area data. I guess there is some
filter setting which is blocking it.
Please check the entries you have maintained in table MVKE - the entries
for the sales data maintained here must match with the ones maintained in the
filters.
thanks & regards,
Krishnen
Edited by: Krishnen Subramanian on Aug 9, 2011 8:47 AM

Trying to add sales area data to sold to party in CRM using

Hi all,
i am trying to add sales area data to a sold to party business partner and i used the BAPI BAPI_BUPA_FRG0010_ADD. it executes i dont get runtime error but i get the error "invalid sales and distribution area" in return table.
also i see that the sales area data of the sold to party is not updated after i execute my program
can anyone tell me what i am missing
Edited by: jessica sam on Nov 13, 2008 8:17 PM

hey Rob i dont know if the configuration is done.but if i try to create a sold to party business partner in the screen in CRM i sales area data tab----->sales area, i find the drop down list with the values for sales organization, ditribution channel and division.
i am able to create a sold to party in CRM and it is replicating in ECC. but if i try to display the sales area data of a sold to party that i created using the function module BAPI_BUPA_FRG0010_GETDETAIL
it throws me an error saying invalid sales area data.
Also i find that data is there in CRMM_BUT_LNK0021, CRMM_BUT_LNK0031 tables but not even one entry in CRMM_BUT_LNK0011
Also i find that data is there in CRMM_BUT_SET0020, CRMM_BUT_SET0030 tables but not even one entry in CRMM_BUT_SET0010
is some thing missing in functional configuration. the CRM guy did an intial upload from R3 and brought the sales organization to CRM.

CRM 3.0 BP Maintenance - Sales Area Data

Hi Gurus
In CRM 3.0 for Transaction BP
In the Sales Area Data is a Tab for Partner Functions.
In which table is this Partner Function data stored please. Please do not provide a Structure name as I am not technical
Many Thanks
Panduranga

Hi Panduranga, how are you?
The information contained there is in table CRMM_BUT_FRG0081.
Kind regards,
Garcia

No sales area data in CRM

Hello,
When we download BP or product for R/3, the sales area data are not available in CRM.
We checked :
- in the org model, the flag 'object relevant for determination'
- programs HRBCI_ATTRIBUTES_BUFFER_UPDATE and CRM_ORG_INDEX_CREATE
But no effect.
What we noticed is table CRMD_ORGMAN empty.
Any advice?
Thanks
Regards,
Fred

Hello Frederic,
I also maintained the table T77OMATTR to activate buffering for Service and Sales.
Next I ran the report HRBCI_ATTRIBUTES_BUFFER_UPDATE .
The job runs, but on our system (development and quality) the job is finished after only 4 to 5 seconds, which seems a bit to fast in my eyes.
do you have any idea which tables are being filled by the report?
and has anyone an idea about the time it takes in average to run the report HRBCI_ATTRIBUTES_BUFFER_UPDATE ?
thanks for a reply
davy

Table for BP sales area in CRM 7.0

Hi Experts,
This is regarding the BP tables in CRM where assigned sales area information is saved. I could not able to figure out in which table I can see only assigned sales areas. I have checked tables like CRMM_BUT_LNK0140, CRMM_BUT_LNK0141, CRMM_BUT_LNK0010, CRMM_BUT_FRG0080, CRMM_BUT_FRG0081. In these table I can see all the sales areas in the systems for a single BP. But I am looking for only maintained sales areas for a single BP.
Could you please advise in which tables I can find this info and how to pull exact information.
Thanks in advance!
Regards,
Kumar Budidagaddapalli.

Sincere Vishal,
DB CRMV_BP_FRG0140 returns Sls group, office and organization, but no Sales area. I would simply like to check sales area for two organizations.
Example (how it should be):
-sales organization: 1, sales area: blank
-sales organization: 2, sales area: 1000
I can find sales organization in different table, but can't find sales area, even in Tx BP (under sold-to-party role, Sales Area Data section. Any suggestions?
Regards,
Matej

About Business Partner Marketing, Sales Area Data tables

Hi,
I want the table names where Business Partner sales area data and Marketing Attributes are stored.
Thanks in advance.
Regards,
Dhanraj.

Hi Natarajan,
Thanks for your help.
But There is no data inside this CRM_MKTPL_ATTR table.
I want the Sales Organisation,Distribution Channel, Division data and Marketing Attributes of Every Business Partner.
I found table CRMM_BUT_FRG0080 contains data, but when I created a new Business Partner and maintain the Sales Area Data, the saved data does not reflect in the CRMM_BUT_FRG0080 table.
Regards,
Dhanraj.

Sales area data is missing when Customer contact replicated to CRM

Dear Experts,
I am facing some problem with the Customer Contact replication from isu to crm, problem is when i create a customer contact by using bct0 interaction record is replicated to the crm, when i open the interaction record in the webic i am getting the error maintain the sales area data ,i am manually maintaing the sales are data in the crm could you please tell me why sales area data is missing while replication could you tell me how to rectify this error.I am using the standard transaction type 0010.
Thanks & Regards
Boyz..

Hello Shravanthi,
Have you looked at the screen in the screen painter in ERP (transaction SE51)? Maybe this will give you a clue to what data is missing.
Kind regards,
Johan Wigert

Sales Area Data isnt replicating from CRM to ECC

Hi Gurus,
We are replicating some BPs of certain groupings from CRM to ECC.
We performed all steps relevant for this task mentioned in Best Practice u201CMaster Data Replication C03u201D. After performing the
steps results are as follows:
u2022     BP General Data is replicating without any trouble.
u2022     When registering sales area data in CRM and trying to get this replication to ECC we see that the BP Sales Area data isnu2019t replicated.
Monitoring SMW01.
The BDOC BUPA_MAIN ended with the following error:
Messages for business partner 0007000362: Fill in all required entry fields
Action already taken:
After reading this message I have reviewed the mandatory fields per Account Group in ECC and mapped them with the CRM ones. Even this changes I still can get sales area data in the ECC BPs replicated.
Is there something I am missing here.
Thanks for your help.

Hi,
Regarding debugging from CRM to R3. Please follow the below steps.
There are 2 methods to debug the Business Partner (BP).
First Method:
1)     In CRM, Go to SM59 -> ABAP Connections => The ECC client -> See if the saved user (in logon details) that is used to connect to ECC from CRM is a Dialog user.
2)     You can use transaction code SU01 to check User Type of User.
3)     Deregister the Queue through SMQS.
4)     Make changes to BP.
5)     Go to SMQ1, Select the Queue name Double Click 2 times then select the Tool bar (Debug LUW).
Second Method:
1)     Put a break point in Function Module SMW3_MFLOW_UPDATETASKBDOC.
2)     Create a BP and before save, type /h to activate debug, Mark update debugging option.
3)     When stops in Function Module u201CSMW3_MFLOW_UPDATETASKBDOCu201D you must be sure to set header-dbgmode = 'X' this will make the BDoc stay stopped in SMW01.
4)     Go to SMW01 and type /h and process the BDoc.
5)     Put a breakpoint in Function Module u201CCRM_UPLOAD_AFTER_MAP_HANDLERu201D and be sure to change LV_SYNCHRON = 'X' this will allow you to connect in ECC.
If the variable LV_SYNCHRON does not have any value, then it will work as background task, if the value is filled with the value u2018Xu2019, then it will allow debugging in R3.
And another point to be noted here is, the user type of the R3 should be Dialog User. If the user is not dialog, then it will not connect with R3.

Customer sales area data not replicated to CRM

Hello,
I'm setting up the data replication model for master data based on configuration guide C03.
We have the following customer master situation:
existing customers with nr range 500000 - 599999 and account group A are created in ERP and replicated to CRM.
new customers with nr range 600000 - 699999 and account group B are created in CRM and replicated to ERP.
PIDE settings are fine.
The initial download of CUSTOMER_MAIN en CUSTOMER_REL went well. I've set a filter in CUSTOMER_MAIN on field KUNNR: value between 500000 - 699999. Everytime a sold-to business partner is created in CRM or a customer is created in ERP, the data gets replicated to the other system.
So far so good.
But here comes the problem: when I assign a sales area to a customer created in CRM (nr range 600000-699999) in ERP, the sales area data is NOT replicated back to CRM. When I assign a sales are to customer created in ERP (nr range 500000-599999) in ERP, the sales area is replicated back to CRM.
Do I have to run BUPA_MAIN? I don't think so, because sold-to business partner are already replicated to ERP.
Is the filter in CUSTOMER_MAIN not good? Should I split the nr ranges into 2 rows: 500000-599999 and 600000-699999 instead of 500000-699999
System environment:
CRM 7 EnhP2 (CRM RDS)
ERP 6 EnhP6
Kind regards,
Koen

Hello,
I found the problem. The PIDE was not set up completely: I only set the account group for ERP customer in the 'R3-->CRM' dialog structure. I've added the account group for CRM customers as well, and now customer data of CRM customers added in ERP, is replicated to CRM.
Cheers

Prospective Account Sales Area Data on CRM Online

Hi Experts,
I am using CRM2007 SP4, and i am trying to assign Sales Area Data to a Prospective Account on CRM Online. However, unlike a reqular Sold-to account (CRM000) there does not seem to be a Sales Area Data Button where the Sales Area can be maintained for a Prospective account.
The BP Role for the Prospective account is BUP002.
It only seems possible to maintain this through the Web Client. Is there anyway which the Sales Area can be assigned to a Prospective Account through CRM Online.
Any assistance would be appreciated.
Thanks,
Jonathan

Hi Sasha,
I've been checking it in our system (CRM 6.0). The field Price group (cust) from ECC (KNVV-KONDA) gets standard replicated to field Price Group (Cust) on the billing tab of customer data (BP).
No additional customizing or development is needed.
The field is stored in: CRMM_BUT_SET0030-PRICE_GROUP
regards,
Wim

Tables in CRM- Sales Area Data

Similar Messages

Maybe you are looking for