Tables, views, packages, etc. not showing for most users

11.1.0.7
trying sqldeveloper 2.1.1 & 3.0.02 (64 bit)
jre 1.6
Started getting blanks this morning when expanding the nodes of most of my local users (cleared filters). Seeing no tables, views, packages. However, if I login sqlplus as that user and select * from tabs, I CAN see all tables are there.
I can use sqldeveloper to view all the SYSTEM user objects and one recent user that I imported (impdp) from a 10g database. However, every other user appears empty in sqldeveloper.
I grant connect, resource to all users since this is just a development database. Also tried granting CREATE SESSION and even ALL PRIVILEGES, no luck. All tried restarting.

self is also facing the same issue. workstation is install WINDOWS 7 Pro and 10g client is not available as of now for Windows 7 Pro so oracle client 11.2.0.1.0 installed. Database pertains to one datacenter is serving as desired but databases lying with remote data center, none of objects are shown even not as SYS also where as sqlplus is showing all objects. tried with TNS option and without TNS as well but objects not listed. don't understand the behavior of SQLDeveloper 2.1.1.64 Build-Main 64.45. for information all DBs are of 10.2.0.4 with mix flavour of non windows o/s.
Edited by: 824691 on Dec 30, 2010 10:33 PM

Similar Messages

SharePoint 2010 List View Web Part not showing for read-only users?

Hello all,
I have List View Webparts on my Blank Web Part page, and it's not showing for Read-Only users.
Is this intended by Microsoft or is it a bug?
Thank you!

Hi,
According to your post, my understanding is that the read only user could not see the list view web part.
Per my knowledge, the issue may be cause that the user do not have the proper permission for the list.
1. Check whether the user can access the list.
2. Check whether the user can view all the items instead of partial items in the list.
3. Check whether there are some fields refer to other lists or terms, especially the lookup field or managed metadata filed.
If that is the case, make sure the user can access the lookup list.
Thanks,
Jason
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Jason Guo
TechNet Community Support

Why responsibility is not show for my user?

Hi experts,
Recently i need to enable one responsibility(named as R below) for my user. As i examined, R is already assigned to the user but
it's expired, so i set the end date as null. Further more, i found that R itself has an expiration date and it has arrived, so i set it as null too.
Till now, i re-login my user and expect R shown on the left tree of home page. But it doesn't exist, really.
I guess there should be a concurrent request need be run but i can't figure this out. Appreciate your help.
Thanks,
ted

If you are on R12, please see (Concurrent Processing - Concurrent Program "Sync Responsibility Role Data Into The WF Table" errors: Cannot Find File affurg02.sql [ID 727534.1]).
R12 is the EBS version i am using. From the note 727534.1, this concurrent program is obsolete and replaced by "Workflow Directory Services User/Role Validation".
Please post the contents of the concurrent request log file here.Log for "Synchronize WF LOCAL tables"
Application Object Library: Version : 12.0.0
Copyright (c) 1979, 1999, Oracle Corporation. All rights reserved.
FNDWFLSC module: Synchronize WF LOCAL tables
Current system time is 09-SEP-2012 03:35:33
**Starts**09-SEP-2012 03:35:33
**Ends**09-SEP-2012 03:37:49
Start of log messages from FND_FILE
End of log messages from FND_FILE
Executing request completion options...
Output file size:
0
------------- 1) PRINT -------------
Disabling requested Output Post Processing. Nothing to process. The output of the request is zero byte.
Finished executing request completion options.
Concurrent request completed successfully
Current system time is 09-SEP-2012 03:37:51
Log for "Workflow Directory Services User/Role Validation"
Application Object Library: Version : 12.0.0
Copyright (c) 1979, 1999, Oracle Corporation. All rights reserved.
FNDWFDSURV module: Workflow Directory Services User/Role Validation
Current system time is 09-SEP-2012 03:36:03
**Starts**09-SEP-2012 03:36:04
**Ends**09-SEP-2012 03:36:31
ORA-08103: object no longer exists
Start of log messages from FND_FILE
End of log messages from FND_FILE
Executing request completion options...
Output file size:
0
Finished executing request completion options.
Concurrent request completed
Current system time is 09-SEP-2012 03:36:31
Thanks,
Ted

SCSM - Service Request Area list - modifications not showing for all users

Hi All
As you cant edit the Service Request Area list, i've settled on changing the default display names to better reflect the categories we want for our SR's. The changes i've made are visible in SCSM on my computer (where i made the changes from), however if
i fire up another instance on a different computer - i can only see the defaults. Anyone seen that before? Typically when i make any sort of change to a list item it is visible for all users.
I'm aware that there is a custom MP out there to allow you to have your own SR Area List, however i was not able to get it to work in our environment (link: http://gallery.technet.microsoft.com/Custom-Service-Request-e4d40738/view/Discussions#content)
Any help would be appreciated.
Thanks

Have you made sure that the selected language in both consoles (the one you are editing from and the one you are testing in) are the same?
When editing lists you will only be asked to save changes (be that changing existing values or adding new ones) if they are stored in a sealed MP - which they should be according to best practice.
If you are not asked which MP to save to then you have already "commited yourself" to a specific MP. You could delete this MP (if there is nothing but the list values in it) or delete them one by one using the console. Then when back to square one the console
will once more ask you which MP to save changes to.
http://codebeaver.blogspot.dk/

UWL Subview does not show for one user

Hi All - We have a UWL Subview. It is working fine except for one user. He cannot see the entire Subview drop down box at all. It is as if it does not exist. I've verified he has the tasks for the Subview to appear. Can anyone give some ideas as to what other possibilities this can happen? I've tried several things. Verified with security no roles exist for functionality within the UWL. The user have tried going to our QA system and logged in as a test user id - Subview visible. His ID is valid and active in ECC. If you don't have a direct answer, maybe you know of tools on how to debug or trace the UWL. I've seen two threads exactly like my situation and they receive no responses. Hopefully, there is something new to my request.
Thanks in advance.

The issue is resolved. In the Portal UWL Admin screen, the user showed personalization settings for the Subview. We decided to delete all entries. He can now see the Subview drop down. It is weird because on his own his access to his own personalization settings is empty.

Special characters in SBWP dynamic columns are not showing for some users

Hi experts,
We have set up a dynamic columns for business workplace. One of the field displays the comments entered by the user. Some users are able to see the values entered perfectly. But for some users, if we enter special characters like @gopal, it is not displaying the value in dynamic column.
Are there any workflow/user settings need to be changed.
Thanks
Gopal

I had the same issue, you should check the link between AD and CRM, so you could make a new user in AD and connect your CRM account with it, then you should return the old AD account back. It worked for me, try it :)

Where is my table,if Package is not given for RPY_TABLE_INSERT?

Hi,
I have a question on FMs RPY_TABLE_INSERT and DDIF_TABL_PUT.
When the RPY_TABLE_INSERT is called ,a dialog is poped up to give package name and so on.If I don't select any package or I click 'Cancel' in this dialog,then use DDIF_TABL_PUT to write a table in ABAP dictionary and get success.But where is my table saved?
I can only use se14 or se16 to check this table,but I never seen in which location thie table lies.
Any idea?
Thanks in advance
B.R.
Liying

Can you view the table via SE11? If so, check the object directory entry.
Click Go To--> Object Directory Entry.
Regards,
Rich Heilman

2.1 Battery Better (for most users)? & Apps Not Crashing, True? Worth it?

Does it really fix these things? And how can Apple claim it fixes the battery for (most) users, are there phones with different batteries and or hardware? And more important, are the Apps not crashing to the Apple logo? Calls not dropping, really?
Copied from the 2.1 update screen:
iPhone 2.1 Software Update
iPhone version 2.1 contains many bug fixes and improvements, including the following:
• decrease in call set-up failures and call drops
• significantly improved battery life for most users
• dramatically reduced time to backup to iTunes
• improved email reliability, notably fetching email from POP and Exchange accounts
• faster installation of 3rd party applications
• fixed bugs causing hangs and crashes if you have lots of 3rd party applications
• improved performance in text messaging
• faster loading and searching of contacts
• improved accuracy of the 3G signal strength display
• repeat alert up to two additional times for incoming text messages
• option to wipe data after ten failed passcode attempts
• Genius playlist creation
For feature descriptions and complete instructions, see the user guide for your iPhone at:
<http://www.apple.com/support/manuals/iphone>
For more information about iPhone, go to:
<http://www.apple.com/iphone>
To troubleshoot your iPhone, or to view additional support information go to:
<http://www.apple.com/support/iphone>
For information on the security content of this update, please visit this website:
<http://support.apple.com/kb/HT1222>

no idea about any of these things all i want to know is if it fixed the txt sound not working and what on earth is the 2 txt sounds mean?? im assuming if u dont look at ur txt it will sound again???, ive checked 3g its still sh1t here even tho im in a huge 3g area apparently but i didnt have many probs with last update so who knows

2013 Custom Web Parts in Page Layouts not showing for users

Custom Web Parts in Page Layouts not showing for users
I have created a master page in the root site collection for a subsite I am developing. I created content types and custom page layouts for the pages within the subsite.
I used the snippet tool in the design manager to create web parts and page field markup which I copied into the custom layout HTML pages in the root site collection. For instance I have an image viewer web part that I place there to serve as a section title.
The problem is that I can see all these customer layout page parts no problem but my users cannot. This leads me to believe its permissions, I am site owner of both the subsite and root site collection.
The users that cannot see the web parts are site members of the site and restricted read users on the root site collection (where the layouts are stored).
What gives I'm finding it hard to understand why a snipet generated web part wouldn't show in all pages created from that layout page.
Any help would be appreciated, Havent found anything on this issue online. weird.

It is a permission issue indeed. Fix is simple, make sure you check out the page layout page, then check it back in as published version.
John Architect

REPORT VIEW OUT PUT NOT SHOW

HI ALL
Report view output not show. only one user cant not view report output
here is a 1 user who cant see report view output what ever other user can see view
when the user click view output no error show nothing happen
can anay 1 tell me how can i slove this problem ?
Regards
Yasir
[email protected]

Hi,
Report view output not show. only one user cant not view report output
here is a 1 user who cant see report view output what ever other user can see view
when the user click view output no error show nothing happenWhat is the application release?
What is the type of this concurrent program? Is it a seeded or custom one?
can anay 1 tell me how can i slove this problem ?Please see if these docs help.
For R12:
Concurrent Report Access Level [ID 736547.1]
How To See Log And Output Files Of Requests Ran By Other Users Using Same Resp In R12 [ID 563946.1]
R12 RBAC Unable to View Output of Requests Submitted by other Users [ID 862812.1]
In EBS R12 How Setup UMX / RBAC To View A User's Request Under Any Responsibility [ID 960405.1]
For 11i:
How to View the Output of a Request Launched by Someone Else [ID 413382.1]
Thanks,
Hussein

How to Export from table view to Excel (not BI query)?

There is a 'How to' document explaining how to export from an iView using a BI query:
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/47fe4fef-0d01-0010-6f87-ed8ecb479123
However:
This 'How-To' document is using an example of a BEx query. I am not using a BEx query, therefore I do not have an "Info port". How can I download to Excel from a table view that is not an iView of a BI query? (It is just a internal table coming from a BAPI).

keenneth,
i am using the query from SQL server, i am having the same problem of not having info port. so did you find a work around for exporting to excel with filters for non sap queries ?
any body who had come across this situation , plz guide me.
thanks in advance
ravi

View 'CUT Home Page View (CME)' is not licensed for this site.(SBL-DAT-0032

Hi Siebel guru,
I am getting below error when i login in to sibel server.
View 'CUT Home Page View (CME)' is not licensed for this site.(SBL-DAT-00327)
can any one help me out to solve this issue ASAP.
Regards
Prabhat

Hi Goud,
In Installtion time it asked pls update your license key.
then i updated my license key from http://licensecodes.oracle.com/siebel.html.
Ifound ther is four row license key information.
I updated only first row licencse key.
Is there any workaround for updating license key.
pls provide me steps.
Regards
Prabhat

Oracle validated package is not available for OEL5

Oracle validated package is not available for OEL5 yet. Does anyone know when it will be available?
Available now:
oracle-validated-1.0.0-3.el4.i386     Oracle Software for Enterprise Linux 4 (i386)
oracle-validated-1.0.0-3.el4.x86_64     Oracle Software for Enterprise Linux 4 (x86_64)
oracle-validated-1.0.0-4.el4.i386     Oracle Software for Enterprise Linux 4 (i386)
oracle-validated-1.0.0-4.el4.x86_64     Oracle Software for Enterprise Linux 4 (x86_64)

Looking forward to the release. Will the release also include updates for 11g readiness and validation?

Account Number In Bank Account Transfer CM It Show For My User Only and Not

Hi,
Cash Management / Bank Account Transfers
when make transfer From Bank Account Transfer and Enter Of All The Required Data
And Search Bank Account Number It Show For My User Only And Not Show For Some Other Users
With The Knowledge That The same responsibility For My User and All Users In Cash Resp.
How to solve this problem ??
Thanks,
Mohamed Gamal
Edited by: Mohamed Gamal on May 12, 2011 11:12 AM

I bought MLB.tv premium through Apple TV however I was not provided with a user ID and password to be able to log in on to the computer to watch as I would if I bought directly from MLB.tv. Is this a scam? Anyone else have this issue.

Time column duration not showing for my podcast

the time column duration is not showing for my podcast shows on the iTunes Store: https://itunes.apple.com/us/podcast/income-press-podcast-blogging/id500448874
For some odd reason it just stopped showing the duration.
Any help or ideas would greatly be appreciated.
Thanks,
Joey

Your feed is at http://feeds.feedburner.com/incomepresspodcast
You have no 'itunes:duration' tags in the feed, which are necesssary for the duration to show in the Store and when subscribing, though in that case the duration will show once the show has downloaded as the iTunes application will detect it from the file itself. In order to show the duration in the Store you need to add this tag, though I can't advise on how to go about it in Wordpress.

Tables, views, packages, etc. not showing for most users

Similar Messages

Maybe you are looking for