Tablespace Percent Used Displays Incorrectly for Large RIDs?

Hello,
After converting the ODSD tablespace to accomadate Large RIDS, the percent used column displayed in ST04/db6perf is incorrect.
This tablespace can now grow to 16tb, yet displays 92% full at 276gb.
Also the Early Watch lists the growth as critcal.
I opened an OSS message(721687) concerning these issues and the response was
"There is nothing wrong in the calculation of 'Percent used' in db6perf
it works as expected" per Kieran Finn
SAP Active Global Support
and as for the EWA :
please upgrade your
ST-A/PI release (Current = 01K_BCO700, patchlevel 0).
The problem is that I am using that release already.
This is on platform
SAP NETWEAVER 7.0 (basis 14)
Operating System AIX 5.3
Database IBM 09.01.0002
Has anyone else encountered thses issues and have any suggestions?

Hi Yvonne,
If you have the need to monitor the growth of your tablespaces in that way, that you want to know, whether the tablespace filling becomes critical, you should look at the alert monitor under 'Alert->Alert Monitor' or the database monitor under RZ20. This will take into account the autoresize property of tablespaces. This feature has been recently added with SAP note 1149240.
Best regards
Ralf

Similar Messages

Deluge and KDE - displaying incorrectly for one user only

My deluge (and possibly other gtk apps) are being displayed incorrectly in KDE. You can see the screenshot attached, but the thing I mostly notice is the progress bar. On my laptop, as well as any other user account on the PC in question, it's a very blue progress bar (so 100% torrents will be all blue, 0% no blue, and obviously in between as % increases). In the past I've messed with various gtk/kde rendering apps (so that gtk apps will display "correctly" in KDE), but I don't currently have any installed. I also have rm'ed the configs in question per the wiki ( https://wiki.archlinux.org/index.php/Un … plications ). I have tried removing the deluge config for my current user and it still doesn't "fix" the issue. I've gone through kde system settings to setting all display options to default-type options (which is what my laptop is set to).
Just wondering if anyone had any thoughts on where I could look to fix this? It's mostly an annoyance, but I've been trying to fix it for a while now so thought I'd finally ask for some help.
EDIT: I realize this should be in the Desktop/Apps sections, so if a mod could move it for me, that would be much appreciated.
Last edited by vladthedog (2013-12-05 18:08:10)

1. You said the projects were all saved "to a shared folder." Do you mean THE Shared folder? Your Mac's Users folder should list two Users, plus a folder named "Shared". Is that the folder you mean?
2. The trouble is that an iMovie project isn't actually a file. It's a special kind of folder called a package, which contains other files and folders. (To look inside the package, Control-Click on the package icon and choose "Show Package Contents" from the popUp menu.)
3. When YOU are the user and you create a new iMovie project, the package and everything it contains is configured with you as the owner. You are the designated owner of all the items that comprise the project. No one else can Write to the project.
4. To change that, you have to change the project package into a normal Finder folder, adjust its permissions and the permissions of all the contents of that folder, then change it back into an iMovie package.
Here's how:
In the Finder, choose Finder > Preferences. Click Advanced and turn ON "Show all file extensions".
The name of your iMovie project "My Sample Project" is now displayed as "My Sample Project.iMovieProject" in the Finder.
Remove ".iMovieProject" from the project name, removing the period. When the Finder asks, say OK.
The project package has now turned into a folder. Select the folder and choose Get Info.
Set Others permissions to "Read & Write". Then click "Apply to enclosed items". When the Finder asks, say OK.
Select the folder name again and add the extension ".iMovieProject" to the name. The folder will change back to an iMovie package.
The package will now allow anyone to Read and Write to the project.
Karl
PS: This solution isn't very handy, obviously, but it does the job. A better solution is to buy an external hard drive, and configure it to Ignore permissions. (In the Get Info window for the disk.) That lets both users save projects to the drive without permission issues.

Change transaction using BDC-problem for large number of lines on screen

Hi All,
I am developing BAPI (using BDC) which creates quality notification in SAP which is entered via front end web application. Structure p_qmsm contain 3 lines of task in notification. The code is as given below. To avoid problem of large no of lines on screen,code lines starting with * is used. This actually for pagedown after entering every 2 lines and creates new line. so that 2 lines always push up on screen and there will not be problem for creating large no of lines on screen
perform bdc_dynpro using 'SAPLIQS0' '7200'.
perform bdc_field using 'BDC_OKCODE' '=10\TAB11'.
LOOP AT p_qmsm INTO wa_qmsm.
*IF wa_qmsm_cntr > 2.
       wa_qmsm_cntr = 2.
       perform bdc_dynpro using 'SAPLIQS0'                   '7204'.
       perform bdc_field   using 'BDC_OKCODE'                 '=PEND'.
ENDIF.
perform bdc_dynpro using 'SAPLIQS0' '7204'.
perform bdc_field using 'BDC_OKCODE' '/00'.
CONCATENATE 'VIQMSM-QSMNUM(' wa_qmsm_cntr ')' INTO wm_qmsm_qsmnum.
CONCATENATE 'VIQMSM-MNGRP(' wa_qmsm_cntr ')' INTO wm_qmsm_mngrp.
CONCATENATE 'VIQMSM-MNCOD(' wa_qmsm_cntr ')' INTO wm_qmsm_mncod.
CONCATENATE 'VIQMSM-MATXT(' wa_qmsm_cntr ')' INTO wm_qmsm_matxt.
perform bdc_field using wm_qmsm_qsmnum wa_qmsm-qsmnum.
perform bdc_field using wm_qmsm_mngrp wa_qmsm-mngrp.
perform bdc_field using wm_qmsm_mncod wa_qmsm-mncod.
perform bdc_field using wm_qmsm_matxt wa_qmsm-matxt.
wa_qmsm_cntr = wa_qmsm_cntr + 01.
ENDLOOP.
CALL TRANSACTION 'IQS2' USING wt_bdc
MODE 'N' UPDATE 'A' MESSAGES INTO P_MESSTAB.
The same code is used in modify mode also. web application is sending all 3 lines in modify mode even if single line is modified. It is already decided to send all rows back from web application to SAP in same sequence. It is working fine if i comment 5 lines which is starting with *. But in modify mode, how can i ensure that correct row is modified? and how can i achieve problem of large no of lines on screen?Please suggest?

Hi yogesh,
how can i ensure that correct row is modified?
1. For this we need to know two things ;
   a) the database table in which the entries are already stored
   b) the sequence in which they are displayed in the transaction.
2. So before changing any line, we need to compare (the primary key values / important values)
   a) as per the database table and as per the incoming data from web application (using bapi)
b) if the match is ok, it means that particular row was not modified, else modified.
how can i achieve problem of large no of lines on screen?
1. For this I am not sure about the transaction and its screen. Manytimes for appending row on the screen,
there is a PLUS + button on the grid toolbar. So for every entry, (inspite of some empty/filled rows already visible on the screen), we should use the + button, and this new row always appears on the top i.e. row number 1.
hope this helps.
regards,
amit m.

Other display option for larger fonts?Is now1920 x 1200 on Imac 24

HI,
I have an IMac 24, the matte display, however I always had this resolution set to 1920 x 1200...
I wear glasses, always had probles with teh small type...
what is the next larger resolution, that I can set the display at,
without distorting the screen???
thanks

FYI, this is the discussion area for the much older iMac G4.
Since your iMac is an Intel-based iMac you should post your future questions in the Intel-based iMac discussion area.

I want to configure my ipad2 only to use cellular even for large Apps download

since cellular network cheaper in india, want to configure ipad2 to download all Apps even larger size through cellular network. need a help.

Can't do it.
20mb limit can't be bypassed.

Using display tag library

Hi,
I am new to JSP. I am using display-tags for pagination purpose. I have checkboxes for each row. When I select some rows and go to next page and come back to the old page, the status of selected rows is lost. Is there any way to store the status of selected rows when I navigate to other pages? I am using struts framework.
Another question, can I use javascript along with the display-tag? If I can, then how can I use it.
Is there any other tags for pagination, that may solve my problem?
Regards
--Vaishakh

Can you please tell me how did you pass it thru session?
What I mean is, when the user clicks on the next page, control is not transferred to our code (which would have allowed me to store selected items in session), instead the displaytag code is being called behind the scenes.
Thanks.

Faster alternative to cfcontent for large file downloads?

I am using cfcontent to securely download files so the user
can not see the path the file is stored in. With small files this
is fine, but with large 100mb+ files, it is much, much slower than
a straight html anchor tag. Does anyone have a fast alternative to
using cfheader/cfcontent for large files?
Thanks

You should be able to use Java to handle this, either through
a custom tag or you might be able to call the Java classes directly
in Coldfusion. I don't know much about Java, but I found this
example on the Web and got it to work for uploading files. Here's
an example of the code. Hope it gives you some direction:

Using getter/setter for returing a string variable to display on an Applet

have two classes called, class A and class testA.
class A contains an instance variable called title and one getter & setter method. class A as follow.
public class A extends Applet implements Runnable, KeyListener
     //Use setter and getter of the instance variable
     private String title;
     public void init()
          ASpriteFactory spriteFactory = ASpriteFactory.getSingleton();
          // Find the size of the screen .
          Dimension theDimension = getSize();
          width = theDimension.width;
          height = theDimension.height;
          //Create new ship
          ship = spriteFactory.createNewShip();
          fwdThruster = spriteFactory.createForwardThruster();
          revThruster = spriteFactory.createReverseThruster();
          ufo = spriteFactory.createUfo();
          missile = spriteFactory.createMissile();
          generateStars();
          generatePhotons();
          generateAsteroids();
          generateExplosions();
          initializeFonts();
          initializeGameData();
          //Example from Instructor
          //setMyControlPanel( new MyControlPanel(this) );
          // new for JDK 1.2.2
          addKeyListener(this);
          requestFocus();
     public void update(Graphics theGraphics)
          // Create the offscreen graphics context, if no good one exists.
          if (offGraphics == null || width != offDimension.width || height != offDimension.height)
               // This better be the same as when the game was started
               offDimension = getSize();
               offImage = createImage(offDimension.width, offDimension.height);
               offGraphics = offImage.getGraphics();
               offGraphics.setFont(font);
          displayStars();
          displayPhotons();
          displayMissile();
          displayAsteroids();
          displayUfo();
          //displayShip();
          //Load the game with different color of the space ship
          displayNewShip();
          displayExplosions();
          displayStatus();
          displayInfoScreen();
          // Copy the off screen buffer to the screen.
          theGraphics.drawImage(offImage, 0, 0, this);
     private void displayInfoScreen()
          String message;
          if (!playing)
               offGraphics.setColor(Color.white);
               offGraphics.drawString("\'A\' to Change Font Attribute", 25, 35);
               offGraphics.drawString(getTitle(), (width - fontMetrics.stringWidth(message)) / 2, height / 2
                         - fontHeight);
               message = "The Training Mission";
               offGraphics.drawString(message, (width - fontMetrics.stringWidth(message)) / 2, height / 2);
               message = "Name of Author";
               offGraphics.drawString(message, (width - fontMetrics.stringWidth(message)) / 2, height / 2
                         + fontHeight);
               message = "Original Copyright 1998-1999 by Mike Hall";
               offGraphics.drawString(message, (width - fontMetrics.stringWidth(message)) / 2, height / 2
                         + (fontHeight * 2));
               if (!loaded)
                    message = "Loading sounds...";
                    int barWidth = 4 * fontWidth + fontMetrics.stringWidth(message);
                    int barHeight = fontHeight;
                    int startX = (width - barWidth) / 2;
                    int startY = 3 * height / 4 - fontMetrics.getMaxAscent();
                    offGraphics.setColor(Color.black);
                    offGraphics.fillRect(startX, startY, barWidth, barHeight);
                    offGraphics.setColor(Color.gray);
                    if (clipTotal > 0)
                         offGraphics.fillRect(startX, startY, (barWidth * clipsLoaded / clipTotal), barHeight);
                    offGraphics.setColor(Color.white);
                    offGraphics.drawRect(startX, startY, barWidth, barHeight);
                    offGraphics
                              .drawString(message, startX + 2 * fontWidth, startY + fontMetrics.getMaxAscent());
               else
                    message = "Game Over";
                    offGraphics.drawString(message, (width - fontMetrics.stringWidth(message)) / 2, height / 4);
                    message = "'S' to Start";
                    offGraphics.drawString(message, (width - fontMetrics.stringWidth(message)) / 2, height / 4
                              + fontHeight);
          else if (paused)
               offGraphics.setColor(Color.white);
               message = "Game Paused";
               offGraphics.drawString(message, (width - fontMetrics.stringWidth(message)) / 2, height / 4);
     public String getTitle() {
          System.out.print(title);
          return title;
     public void setTitle(String title) {
          this.title = title;
}displayInfoScreen method in class A calls out for getTitle( ) to be displayed on an applet as an initial display string for the application.
The instance variable title is set by setTitle method which is called out in class testA as follow,
public class testA extends TestCase
      * testASprite constructor comment.
      * @param name
      *          java.lang.String
     public testA(String name)
          super(name);
      * Insert the method's description here.
      * @param args
      *          java.lang.String[]
     public static void main(String[] args)
          junit.textui.TestRunner.run(suite());
          // need to figure out how to get rid of the frame in this test
          System.exit(0);
     public static Test suite()
          return new TestSuite(testA.class);
      * Basic create and simple checks
     public void testCreate()
          A theGame = new A();
          assertNotNull("game was null!", theGame);
      * Basic create and simple checks
     public void testInit()
          A theGame = new A();
          Frame gameFrame = new Frame("THE GAME");
          gameFrame.add(theGame);
          int width = 640;
          int height = 480;
          gameFrame.setSize(width, height);
          // must pack to get graphics peer
          gameFrame.pack();
          theGame.resize(width, height);
          theGame.setTitle("TEST THE GAME");
          theGame.init();
          assertEquals("ASprite width not set", A.width, width);
          gameFrame.dispose();
          gameFrame.remove(theGame);
}Basically, class testA invokes the init( ) method in class A and start the applet application. However, it displays a white blank display. If I change the getTitle( ) in the displayInfoScreen method to a fixed string, it works fine. Did I forget anything as far as using getter & setter method? Do I have to specify some type of handle to sync between setter and getter between two classes? Any feedback will be greatly appreciated.
Thanks.

Your class A extends runnable which leads me to believe that this is a multi-threaded application. In that case, title may or may not be a shared variable. Who knows? It's impossible to tell from what you posted.
Anyway, what is happening is that your applet is being painted by the JFrame before setTitle is called. After that, who knows what's happening. It's a complicated application. I suspect that if you called setTitle before you added the applet to the frame, it would work.

Storage values under about this mac displaying incorrectly, but amount of space used IS correct. Any ideas?

I noticed recently that the "storage" under "about this mac" is displaying incorrectly. It doesn't show the correct values for my photos, videos, and audio files. It classifies this data under "other". I have been searching all over the internet, I went to the Apple genius bar yesterday and they recommended I re-install OSX. I did and it still shows up incorrectly. They were baffled, said they never really came across this issue. I have tried re-indexing spotlight, that didn't seem to help.
The amount of storage used IS correct. It just doesn't show up under the correct categories in storage, under about this mac. Also, the computer seems to work fine. No real issues. It's a mid 2012 MBP. 500gb hard drive. Most recent OSX is installed.
I DO NOT think it is local snapshots, cause my backups category is small and the amount of space used and free is correct. I have downloaded omnidisk sweeper to confirm this.
I have seen a few posts on here and around the web referring to this, but no real answers. I have also reviewed Pondini's info on this to no avail.
Does anyone have any ideas?!?!

Also,
I had installed a version of parallels with windows 7, but deleted it. Would parallels be causing my computer to index incorrectly? I I used appcleaner to delete all the parallels files so I do not have it anymore.

List Views displaying error - when using Lookup column for filtering ( which are indexed )

I'm trying to filter a large list that has more items than the list view threshold. The list has a lookup column that is indexed. If I try to filter by other columns, the view works fine as long as it returns fewer than 5,000 items. However, if
I try to filter by the lookup column, I get the error about not being able to display the items because the list is too large.
The views are returning items which are less than threshold value , but still I am seeing the same issue.I Created some pages and added this filtered views to the pages it is showing below error
This view cannot be displayed because it exceeds the list view threshold ....
IF I navigate the view in the list it's returning zero records with out any error page . But no records.
Is there a known issue with filtering large lists by lookup column? Any other troubleshooting suggestions? Everything I'm doing here is through the web interface.

Thank you for your reply. Yeah it’s default limit. But when I created view based on some filter condition on lookup column it’s not working.
For example:
Created a View based on Lookup column DEPT using filter condition Dept = HR , returned 1400 items
Created another View based on Lookup column DEPT using filter condition Dept=Admin , returned 3600 items
Adding this list view webparts to the page also working fine , displaying the results .
After adding one item to this list , both the views are not displaying any results. Now the count is 5001.(it exceeded the list view threshold)
The page where the list view web parts are added throwing the below error.
This view cannot be displayed because it exceeds the list view threshold (5000 items) enforced by the administrator.
To view items, try selecting another view or creating a new view. If you do not have sufficient permissions to create views for this list, ask your administrator to modify
the view so that it conforms to the list view threshold.
Learn about
creating views for large lists.
I am experiencing this problem only with lookup columns, Choice and site columns are working fine in this same situation .
Thanks,

Amount of temporary tablespace size used for index rebuild

Hi All,
I want to know approximate amount of temporary tablespace size used for index rebuild. I need this information to avoid the insufficient temporary tablespace error during the huge index rebuild.
Is there a query or procedure to find it out.
Thank you.

Hi,
While creating the index, the temporary segment is created in the permanent tablespace. So permanent tablespace must have sufficient space.
http://www.oracle-base.com/articles/10g/SpaceObjectTransactionManagement10g.php
http://aprakash.wordpress.com/2010/01/05/numeric-segment-name/
Anand

How to use Source Code Control for Large Application?

Hi, All!
I would like to collect knowledge about "best practice" examples for using Source Code Control and project organization for relative large application (let's say approx 1000 SubVIs).
Tools used:
LabVIEW 8.0
CVS Server
PushOK CVS Proxy Client
WinCVS
With LabVIEW 8 we can organize large project pretty well. This described in article Managing Large Applications with the LabVIEW Project.
I have read this article too: Using Source Control Software with LabVIEW In this Article Source Safe used, but with PushOK all looks nearby the same and works (some tricks for compare function are required).
Example. Two developers working together on same project. Internally project is modular, so one developer will work with module "Analysis", and another one with "Configuration" without interferences. These modules placed into Subfolders as shown in example above.
Scenario 1:
Developer A started with modification of module "Analysis". Some files checked out. He would like to add some SubVIs here. So, he must also perform check out for the project file (*.lvproj), otherwise he cannot add anything into project structure.
Developer B at the same time would like to add some new functions into module "Configuration". He also needed to check out project file, but this file already checked out by Developer A (and locked). So, he must wait until lvproj file will be checked in. Another way is mark *.lvproj files as text files in PushOK, but then one of developers will get conflict message by checking in and then merging will be necessary. This situation will coming very often, because in most cases *.lvproj file will be checked out all the time.
Question: Which practice is better for such situation? Is Libraries better than folder for large project?
Scenario 2:
Developer C joined to the team. First, he must get complete project code for starting (or may be at least code of one Library, which assigned to him).
Question: How it can be done within LabVIEW IDE? Or WinCVS (or other SCC UI) should be used for initial checkout?
Scenario 3:
Developer D is responcible for Build. Developers A,B,C have added lot of files into modules "Analysis", Configuration" and "FileIO". For building he need to get complete code. If our project splitted into folders, he should get latest *.lvproj first, then newly added SubVIs will appear in Project Explorer, then he should expand tree, select all SubVIs and get latest versions for all. If Project organized in Libraries, he must do the same for each library, isn't?.
Question: Is this "normal way", or WinCVS should be used for this way? In WinCVS its possible with two mouseclicks, but I prefer to get all code from CVS within LabVIEW IDE recursively...
That was a long post... So, if you already working with LabVIEW 8 with SCC used for large project, please post your knowledge here about project structure (Folders or Libraries) and best practices, its may be helpful and useful for all of us. Any examples/use cases/links etc are appreciated.
Thank you,
Andrey

Regarding your scenarios:
1. Using your example, let's say both developers checked out version 3
of the project file. Assuming that there are only files under the
directories in the example project, when Developer A checks in his
version of the project, there will be new files in one section of the
project separate from where Developer B is working. Developer B,
notices that there is now a version 4 of the project. He needs to
resolve the changes so will need to merge his changes to the latest
version of project file. Since the project file is a text file, that is
easy to do. Where an issue arrises is that after Developer B checks in
his merged changes, there is a revision 5. When Developer A and B go to
make another change, they get the latest version which will have the
merged changes to the project file but not the referenced files from
both Developer A and B. So when A opens version 5, he sees that he is
missing the files that B checked in and visa versa. Here is where the
developers will needs to manually use the source control client and,
external to LabVIEW, get those new files.
Where libraries help with the above scenario is that the library is a
separate file from the project so changes made to it outside of the
project do not require the project to be modified. So this time, the
developers are using a single project again which time time references
two libraries. The developers check out the libraries, make changes to
the libraries, and then check those changes in. So when each developer
opens the project file, since it references the project file, the
changes to the library will be reflected. There is still the issue of
the new files not automatically coming down when the latest version of
the library is obtained. Again, the developers will needs to manually
use the source control client and, external to LabVIEW, get those new
files. In general, you should take advantage of the the modularity that
libraries provide.
2. As noted in the above scenario, there is no intrinsic mechanism to
get all files referenced by a LabVIEW project. Files that are missing
will be noted. The developer will then have to use the source control
provider's IDE to get the initial contents of the project (or library).
3. See above scenarios.
George M
National Instruments

Can I stream a movie from my Macbook to my Apple TV on one display, and still use my Macbook for other things?

I have a Macbook Pro and an Apple TV. What I'd like to do is stream a movie from my CinemaNow Account to my television by using my Apple TV and my Macbook. I know that I can do this my using the mirroring feature, however then I can no longer use my Macbook for anything else because my TV will only display what is on the screen of my Macbook. Now with this is mind, what then is the point of having multiple displays through the use of my Apple TV, if only one display can be used at a time unless they both show the same image? Or is there a way for me to be able to stream the movie to my TV and still use my Macbook for other purposes (multi-tasking)?

To enable a second display over AirPlay, you first need to be connected to the same network as your Apple TV. Next, open System Preferences > Displays, and select your Apple TV from the “AirPlay Display” drop-down menu.
Once you do this, your display may flash as the second display connection is acquired, and the Apple TV takes over as the second display. If the displays are mirrored, then you can correct this by opening the “Arrangement” tab in System Preferences > Displays, and ensuring that the “Mirror Displays” checkbox is unchecked.
In this same “Arrangement” tab, you can move the displays around in the pane to ensure that they're positioned correctly, relative to your physical space (usually side-by-side, or top-down). The primary display here is denoted here by the Menu bar on the display. The arrangement helps with being able to drag windows from one display to the next: if your secondary display is arranged to be to the right of your primary one, for example, you can drag things to it through the right side of your primarcy screen.

Calendar Tile on Windows 8.1 displaying incorrect date for icloud calendar but date icon displays correct date on iPhone 5 and iPad Air

Calendar Tile on Windows 8.1 displaying incorrect date for icloud calendar but date icon displays correct date on iPhone 5 and iPad Air. Date on Windows 8.1 is correct. Thank you.

Try doing a reset on your phone. Sounds like your carrier's time set is not getting through to your device. If the reset doesn't do it, then go to Settings>General>Reset>Reset Network Settings. That should do it.

I have Adobe Photoshop and Adobe Lightroom on my MacBook Pro laptop. I bought an iMac and I'd like to move my installations to the larger display desktop for editing purposes. How can I go about transferring them?

I have Adobe Photoshop and Adobe Lightroom on my MacBook Pro laptop. I bought an iMac and I'd like to move my installations to the larger display desktop for editing purposes. How can I go about transferring them?

I have the same question. It seems that Adobe is almost impossible to contact (I ended up here at the forums to ask the same question).
I will never buy another Adobe product again if I can get another program to replace it. If this is customer service then it is NON EXISTENT!
I notice that your question has not been answered and why should you have to get the information from a forum? I know of no other company that makes you do this for simple product information.
NOT HAPPY with this version of arrogant customer service (nor am I happy about renting Photoshop products into the future - it is just a money grab in my opinion). I will be voting with my feet and going elsewhere in future.

Tablespace Percent Used Displays Incorrectly for Large RIDs?

Similar Messages

Maybe you are looking for