Tablespaces reach 100 percent even though limit is higher and Autoextend ON

I am working as an APPS DBA and am running the E-Business Suite in a production environment. The problem is that sometimes when I check the tablespace growth some of the tablespaces reach 100%, and available space showing zero (e.g APPS_TS_MEDIA) even though there is a higher limit set for that tablespace. AUTOEXTEND is also ON. Could anyone please let me know what causes that to happen?

To add to what Nick said, it also possible that immediately after extending that the tablespace will still show near 100% used based on the file extension size and the next extent size as is 64M for both. Plus a second object could extend consuming left over space soon after the file extension.
If you use extendable files measure space used as the total used space / total available to allocate based on maxsize and not on what is used out of what is currently allocated.
HTH -- Mark D Powell --

Similar Messages

Window 8.1 Chinese character cannot display properly in a game even though I have downloaded and install all chinese language packs

Hi,
The operation system for my computer is Window 8.1. I am currently trying to install a chinese game. Even though I have downloaded and install all the chinese language pack, I have even set the regional language locale to chinese (similified / traditional),
the chinese characters will not display properly in the game. Some people told me i need to set the locale to Chinese PRC, but I am not sure where to download this PRC language pack for window 8.1 (as I only have chinese simplified and chinese traditional).
I would greatly appreciate if someone can give me a hand in solving this problem. Thank you for your help in advance.

Hi,
The operation system for my computer is Window 8.1. I am currently trying to install a chinese game. Even though I have downloaded and install all the chinese language pack, I have even set the regional language locale to chinese (similified / traditional),
the chinese characters will not display properly in the game. Some people told me i need to set the locale to Chinese PRC, but I am not sure where to download this PRC language pack for window 8.1 (as I only have chinese simplified and chinese traditional).
I would greatly appreciate if someone can give me a hand in solving this problem. Thank you for your help in advance.
Hi,
Please open Region, under administrative -> Language for non-Unicode programs: choose Chinese.
Kate Li
TechNet Community Support

I have updates for iMovie and iPhoto but when i try to update them i'm told To update this application, sign in to the account you used to purchase it." even though i bought it and it is on my iMac!

I have updates for iMovie and iPhoto but when I try to update them through App Store I'm told that "To update this application, sign in to the account you used to purchase it." even though I bought it and it is on my iMac! Any suggestions on what I need to do?

Hi...
Delete both apps using this utility > Download AppCleaner for Mac - Uninstall your apps easily. MacUpdate.com
That will delete the apps and all associated files.
Then re download the apps. That will download the most recent version updates included.
How to re download apps from the Mac App Store:
Open the App Store. From the menu bar click Store > Sign In
Click Purchases from the top of the App Store window.
Select which apps you want to re download. Then right or control click where you see Installed then click Install.
Make sure and use the same Apple ID used for the original purchase.

In IE I keep getting "adobe flash player 10 required" even though I have uninstalled and reinstalled

in IE I keep getting "adobe flash player 10 required" even though I have uninstalled and reinstalled the latest version. Weirdly, the sound still works

Just to update: Before posting, I tried everything I could find on Flash Player Help | Installation problems | Windows and nothing worked. The flash player stopped working in early November. I know it is some setting somewhere that I need to fix, but I just can't find it. I get a message that "adobe flash player 10 required" but, oddly, I still get sound.

After using my macbook for 2 years with same printer,all of a sudden I can't print a page doc even though printer is working and I can print from I/Mail, etc.Anybody had this happen and have a possible answer?

After using my MacBook Pro and pages for 2 years with the same printer, all of a sudden I can't print a pages doc even though the printer works and I can print from I/Mail, etc. Anyone have a possible answer?

Often printing problems are a sign of corrupt preferences. Go to HD > Users > (your account) > Library > Preferences, delete the com.apple.iwork.pages.plist file & then restart Pages.

TS3159 Some songs that I've bought on iTunes won't play on my iPhone 3GS even though they used to and they will still play on iTunes. Anyone know what I can do to get these songs to play on my iPhone again?

Some songs that I've bought on iTunes won't play on my iPhone 3GS even though they used to and they will still play on iTunes. Anyone know what I can do to get these songs to play on my iPhone again? Please help!

No, I haven't figured it out. And no one from Apple has contacted me to help. Very frustrating. Sure makes me want to not buy music on iTunes and just buy CD's.
Do you have a 3GS too? Maybe it's something with that phone??

I am trying to use screens and it keeps telling me it cannot detect Java even though I have installed and updated Java? What might be the problem?

I am trying to use "screenr" and it keeps telling me it cannot detect Java even though I have downloaded and updated Java? What is going on or what might I do to correct this?
Thanks

Firefox needs 32-bit plugins, so you'll need to install 32-bit Java for Firefox.
No, you can't change Firefox from 32-bt to 64-bit. There is a Nightly 64-bit version (alpha) of Firefox, but it is used only to test for regressions until development is resumed.

I can't install photoshop elements 12 even though I restarted computer and turned off firewall.

I can't install photoshop elements 12 even though I restarted computer and turned off firewall.

Moving this discussion to the Downloading, Installing, Setting up forum.
Surgeon21 do you receive any specific errors when trying to install Photoshop Elements 12? Also which operating system are you using?

TS4532 My iPhone V will not connect to a Microsoft Exchange server. It says that the User Name or Password are incorrect even though they're not and I can log on directly to Exchange using the web browser. The connection worked until IOS 6.1.2 was Install

My iPhone V will not connect to a Microsoft Exchange server. It says that the User Name or Password are incorrect even though they're not and I can log on directly to Exchange with the same parameters using the web browser.
I bought the phone when it came out last October. The connection did not work at first, then started without warning in December. It worked perfectly for 2 months then stopped again when IOS 6.1.2 was Installed.
Help please!

I have forwarded these questions about the version of Exchange server that is being used and whether Microsoft host the mai themselves to the IT Dept but I will not get a reply from them until tomorrow.
In the meantime I have also tried:
Deleting and re-creating the account AGAIN!
And re-setting the phone (recommended as a solution to a similar problem with an iPad in another forum.
But please remember that:
The phone would not connect for 2 months after I bought it
Then started working unexpectedly in December
Then stopped working again when IOS 6.1.2. was installed
Also why am I the only person affected by this when colleagues with iPhone 3s and 4s who use the same mail system are not (I am still trying to find one with an iPhone V to see if their's works).
Like I said I think that there must be a fault, either with my own phone or with iPhone Vs in general.

The wi-fi on my iphone 6 is "locked", even though the password correct and has been accepted. How do I unlock it so I can get back on the 'net?

The wi-fi on my iphone 6 is "locked", even though the password correct and has been accepted. How do I unlock it so I can get back on the 'net

Only the carrier to whom the device is locked can unlock it.
StraightTalk is not a supported carrier... not all features may work.

Why do i constantly get 1009 and 100 errors even though i'm updating what i previously downloaded from same country and from the same app store??...its just simply awful

It has been like a month since i can't update my apps which i downloaded from the App Store...now i keep getting error1009 followed by error100 even though i'm still living in the same country and using the same account and updating from the same App Store...this is getting awful,painful and very frustrating???is there any solution...even if when i try to download from third parties,i just get sent back to the same awful App Store...So WHAT is the Solution??????????

I would delete the apps that you are trying to update. The MAS should then offer to install the app and it will install the updated version.
If you are afraid of completely loosing the app then either copy the app to an ext HDD or put it in the Trash, but do not empty the Trash until you are sure that the MAS has installed a new version.

Trying to download just ONE audiobook... it downloaded them all! even though I have "selected" and just the one checked -- help!

i downloaded the iTunes update to 11.1. Normally I just download one audio boo to my iPhone (5) at one time, this time, even though I had "selected audiobooks" checked and just the one audio book checked, it downloaded all of them. That's taking up almost a gig of space on my 16G phone. Before I realized it was trying to download every book, i deleted about 500 pictures (okay, I really needed to delete them anyway...) along with a bunch of apps I never use, to make room for what I thought was just the one new book I purchased.... is there a fix for this?

Hi!
This could be done in many ways so it's quite hard to pin point what's going on and how it's done.
The first thing I would do is to reset the the router you have, creating a new password for loging on in case they have gained access this way, then create a new password for the wireless network if you are using it.
Then reinstall your computer, if they/you have installed some software and gotten a Trojan, the only way to get rid of it to 100% is to reinstall. There is no meaning in trying to find it and uninstalling it since it's gotten this far allready.
Depending on what router you have, you might be able to get the logs and see from where they are connecting and trying to pinpoint their location.
There are probably other ways to find out more, but if this happened to me, the first thing I would do is to get rid of the problem, ignoring who they are.
Best regars
Andreas Molin
Andreas Molin | Site: www.guidestomicrosoft.com | Twitter: andreas_molin

My iPhone 4 doesn't connect to any wifi sources anymore (even though it used to) and regularly cuts out of service.

My iPhone is from the US and I've had it for nearly two years. I'm with optus. I know that this is not allowed to be discussed but my phone was bought jailbroken. Neither my father nor I had any idea what this meant at the time and would not have bought it if we did know. My wifi connectivity worked fine up until a month ago when it cut out for no reason at all. Since then it cannot connect to any wifi sources. Also, my phone has recently been cutting out of service 1-2 times everyday. I understand that this may due to the fact that my phone is jailbroken. However is there anyway I could unjailbreak my phone? I'm not sure if it is factory unlocked because the iPhone wasn't bought from Apple even though it is legit. So is there really anything I could do to fix my phone? It's running on IOS 4.0.1.
Please help me. I'm fifteen and I really have no idea what to do!
Any help would be greatly appreciated!

In settings>general> cellular do you have it turned ON?

Single songs don't play even though they are synced and work fine on the computer??

I only recently discoverd this problem. Single songs that I synced into my iPod 5th gen just wont play (they used to work before) even though when I check on my iTunes they work fine and even after syncing it again and even reseting my iPod it just wont work. All that happens is that I click the play button on the song the cover art with the timeline pops up for a split second as if it is going to play and then it just goes back to the title menu with the songs name, and nothing plays. This only happens with a few songs that used to work fine but from what I've noticed its only from songs that are pulled out of an album and placed alone (as in I only have one song from an album on my iPod) even though other songs that are singles like that work fine. It's very confusing and I have no idea how to fix it, please help.

Odds are, the tracks causing the issue are bad. When the ipod tries to play a track that has a problem, it skips to the next track. I realize your track plays in iTunes, but iTunes can play just about anything. Just because something plays in iTunes, does not mean it will play on everything else.
Your best bet is to re-import the bad tracks or re-sample the ones you have. In iTunes you can do this by highlighting the track causing a problem then selecting create AAC or MP3 version... whatever options you get. Then take that new track and sync it and see if that fixes it.
i

HT4352 I have home sharing turned on on my computer but the Apple TV does not recognize it even though the same Appleid and password is used. Does anyone have this issue and, if so, how did you resolve it?

Issue with Apple TV not recognizing the home sharing option in itunes. Calls for paswrod but even when added it still does not recognize it. iTunes indicates that the home sharing optionis on but this is apparently not seen by Appletv. How can this be resolved?

Hi Augstiner57, I have the same problem. Did you figure it out? Mine seems to have happened after I updated Apple TV. Now it doesn't recognize my Home Sharing even though on my MacBook is it turned on.
I am running an old OS though (Leopard) so I am wondering if I need to upgrade.

Tablespaces reach 100 percent even though limit is higher and Autoextend ON

Similar Messages

Maybe you are looking for