Tablet is not turning on..

Hello I have a Lenovo Tablet A1000. The warranty is expired, and it is not turning on. The screen stays blank. When I press the power button it vibrates a little. It was nearly dead so I put it on charge and wen to sleep. When I woke up and checked on it it hadn't charged. I tried different chargers and ports, but it didn't work. Then it died. Now it is not turning on at all. A similiar issue like this happened before, but I solved that with the volume + power button thing. Now, that is not working. I tried that thing you do with a pin in that hole near the sd card but nothing has happened. I pressed the power button for 30 secs 40 secs nothing happnned. I have tried all sorts of combinations with how long press the volume and power button, nothing. Please help. 

Please read this:
Article ID: KB27705 BlackBerry PlayBook Power - Battery charge and discharge characteristics
Starting in BlackBerry Tablet OS 2.0.1:
Once the yellow LED begins pulsating indicating charging mode, if the BlackBerry® PlayBook is disconnected from the charger, the following graphic will be displayed on the screen, indicating charging is not complete, and to reconnect the power source. The graphic will be displayed for 20 seconds before the BlackBerry® PlayBook powers off if the power source is not reconnected. The same graphic will also be displayed if the BlackBerry® PlayBook is turned on and there is not sufficient power to perform the boot process.
If the BlackBerry® PlayBook is plugged into a power source, and the power button is pressed to power on the device, the following graphic will be displayed if there is not sufficient power to perform the boot process. If this occurs, the BlackBerry® PlayBook should be left plugged in to gain enough charge to boot.
If, after charging the Tablet for 4 - 6 hours still results in no LED's, attempt to force power on the Tablet by pressing and holding only the Power Button for only 20 seconds.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4   Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA   Display/Scan Bar Code

Similar Messages

  • My tablet does not turn

    My tablet does not turn
    Hello nearly a year ago bought a tablet lenovo thinkpad 1 with feeding problems, we sent for warranty to bogota, and after nearly a month and returned it worked fine, but do not use very often two days ago I returned to use but not lit, the charger does not get it, that I can do?

    i have the same problem with my envy x2 13 j002dx. tried reinstalling drivers and windows 10. the auto rotate button is there but doesnt do anything when i toggle it

  • Upgrade to Windows 10 by using my notebook as a tablet does not turn the screen

    I realized that after doing my upgrade to Windows 10 by using my notebook as a tablet does not turn the screen  (al realizar mi actualizacion a windows 10 mi laptop ya no gira la pantalla en modo tableta... y es 360 grados.. como lo resuelvo??? gracias!!!

    i have the same problem with my envy x2 13 j002dx. tried reinstalling drivers and windows 10. the auto rotate button is there but doesnt do anything when i toggle it

  • Disabling data usage on Elipsis Tablet does not turn of Data Usage

    Yesterday purchased 3 tablets for my kids. First thing I did when I got home was add home wifi and disable data usage. Ridicoulous but this does not disable data usage. Tablet used 4gb of data before I realized what was going on, all the while connected to home Wifi, like the data connectio took precedence. This is a major flaw of this tablet. Called Customer Service, waiting for a mgr to call back. Unfortunatly waiting on hold for over 45min without getting to tech support but in the end the only way to turn off data apparently (or at least I found) was to put in Airplane mode. This is not right!
    Even support forum states this is the way to enable/disable data. I feel dooped!

        I'm sorry you waited so long trying to get through to Tech Support dm805. I know being able to disable Mobile Data is important to keep usage under control. As Ann154 mentioned, you are able to turn off Mobile Data in Settings. You can go to Settings> Data Usage> Select Mobile Data (at top right hand side), and it will turn off.  You can also go to Settings> More> Mobile Networks> Uncheck Data Enabled.
    I hope this helps.
    Thank you,
    VanessaS_VZW
    Follow us on Twitter @VZWSupport

  • My tablet is not turning on...

    I didn't charge it one night and the battery life was on about 8%. So I charged it and turned it off. When I try to turn it on nothing happens. Do I need to change battery ot is it dead?
    thanks in advance.
    doll houses
    Solved!
    Go to Solution.

    Please read this:
    Article ID: KB27705 BlackBerry PlayBook Power - Battery charge and discharge characteristics
    Starting in BlackBerry Tablet OS 2.0.1:
    Once the yellow LED begins pulsating indicating charging mode, if the BlackBerry® PlayBook is disconnected from the charger, the following graphic will be displayed on the screen, indicating charging is not complete, and to reconnect the power source. The graphic will be displayed for 20 seconds before the BlackBerry® PlayBook powers off if the power source is not reconnected. The same graphic will also be displayed if the BlackBerry® PlayBook is turned on and there is not sufficient power to perform the boot process.
    If the BlackBerry® PlayBook is plugged into a power source, and the power button is pressed to power on the device, the following graphic will be displayed if there is not sufficient power to perform the boot process. If this occurs, the BlackBerry® PlayBook should be left plugged in to gain enough charge to boot.
    If, after charging the Tablet for 4 - 6 hours still results in no LED's, attempt to force power on the Tablet by pressing and holding only the Power Button for only 20 seconds.
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Tablet will not turn off or on even with hard reset

    Dear Apple Support,
    Bought my refurbished Apple Ipad 4th generation 2 weeks ago directly from Apple.  Tonight it went to a blue screen.  I tried over and over to force a shut down with the Home button and the Sleep/Wake button, to no avail.  I do get the screen now that tells me to hook to ITunes via my computer and the directions say to use the cable that came with my tablet.  However, I did not receive a cable with my tablet, only the lightning plug to recharge the battery.
    Could you please tell me what to do, as I am devastated since this tablet is only 2 weeks old.
    Sincerely,
    Pauline E Booher

    If you got it from Apple just two weeks ago, I would just drop into an Apple Store and they will set you up in no time flat!
    That cord they are talking about is also the very same cord used for charging. In other words, there is only ONE cord, and if you got one cord, that's it.

  • My Lenovo Tab S8-50 will not turn on?

    Hi,  i bought myself a new Lenovo Tab s8-50 2 days ago and as i went to put it on charge today it was on a 50% battery life so plenty of juice left but i'm going out tonight and so i wanted it filled up. After coming back after a few hours the tablet will not turn on it just has a black screen. the charger is on and anyway it would not lose 50% of its battery on idle just after a few hours. Is this a fault commonly know and can i fix it? Please help. Thanks, Tom

    Weird problem. I would go to the shop from where you bought it. Or you could try turning it on with power button pressed for like 20 secs or power+both volume buttons.

  • Dell XT2 Upgrade to Windows 8, Embedded WWAN Not Turned On

    I've been working on a friend's computer, and upgraded her Tablet/Laptop Inspiron XT2 (originally with XP Media) to Windows 8 Pro. The laptop has an embedded (believe it's the 5600) WAN card for Verizon. I got the driver installed from Dell's website, yet Verizon's Broadband software (VZAccess) tells me it's not turned on. I've checked hardware switches, the fn+f4 (or whichever combo it was), looked in network connections, checked using Unknown Devices to detect, and still no avail. In device manager, the only unknown devices are the fingerprint reader and the touch screen, which makes me think the wwan card is properly installed, just not being detected by connection manager. Any ideas on how to proceed?

    I've been working on a friend's computer, and upgraded her Tablet/Laptop Inspiron XT2 (originally with XP Media) to Windows 8 Pro. The laptop has an embedded (believe it's the 5600) WAN card for Verizon. I got the driver installed from Dell's website, yet Verizon's Broadband software (VZAccess) tells me it's not turned on. I've checked hardware switches, the fn+f4 (or whichever combo it was), looked in network connections, checked using Unknown Devices to detect, and still no avail. In device manager, the only unknown devices are the fingerprint reader and the touch screen, which makes me think the wwan card is properly installed, just not being detected by connection manager. Any ideas on how to proceed?

  • A1000l-f will not turn on after firmware update

    i bought my tablet last night  as a black friday sale item from office depot and it was working fine for about 2 hours. it then said i needed to update my firmware so i did. after a minute or two a screen popped up stating it needed to shutdown or something and did i want to do this now or in 30/60/90 minutes. i picked for it to do it now. i went for a walk and ever since then the dang thing will not turn on, it will do nothing. no vibrations, no noises, nothing. the back sticker says it is an a1000L-F, but it is an 8gb so i am assuming it is not an actual F? any help? the battery was at 68% and plugged in/charging when i updated the firmware. i also left it plugged in and charging all night (10 hours) and still does nothing.
    Solved!
    Go to Solution.

    well, before taking it back to the store i tried plugging it into my iphone base charger/plug. turned right on! not sure why it died so fast when it was at "68%" while plugged in charging...but it did. i charged it to 100% and it has worked perfectly fine ever since. maybe the charger plug that comes with this thing sucks, i dont know....but it works now just fine.

  • My razr m just stopped working turned off by itself and will not turn on

    my razr m just stopped working turned off by itself and will not turn on

    raamw,
    My wife has the exact same phone and I have the razr HD (basically the same, just larger screen etc).
    We have run into the same thing a few times, and as stated above by Callie I have found it is a dead battery issue. BUT unlike my previous phone (Droid incredible) that I could usually plug in, wait a few minutes, then at least turn on and use while plugged in, I have found for the M and mine it really took a bit to get it charged.  Kind of like as long as there is some battery you are ok, but once it dies it takes a bit of charging.
    ALSO - I am going to perhaps not use the right terms or words for this, but  I THINK (emphasize think) at least once it wasn't enough to use one of the lower amp chargers.  at least on mine.  tried to charge and charge and didn't seem to work.  Finally I took a charger that I normally need to use for my daughters tablet and use that then it had enough kick.  I will note I think that was the issue.
    regardless each time yes it took awhile before we could turn them on.  ALSO it seemed like it took a much longer time in holding the power button down.  BUT eventually they started up and we were good to go.
    we love our phones, she especially loves the size of the M.  BUT we have learned in the short 2-3 months we have had them, if possible, don't let the thing drain all the way.  just seems to cause a bit of a hastle

  • Pro Book 450 G1 will not turn back on

    Hi all,
    My HP Pro Book 450 G1 will not turn back on, and a orange light blinks 8 times next to the AC adapter whenever I press the power button. I couldn't do anything. Any other suggests regarding how to fix this problem?
    Thank you.

    Hello @TK2 
    Thank you for posting on the HP Forums.
    To get your issue more exposure I would suggest posting it in the commercial forums since the ProBook 450 G1 is a commercial product. You can do this here: Notebook - HP ProBook, EliteBook, Compaq, Slate/Tablet PC, Armada, LTE
    The support page for your product may be helpful in the meantime: HP ProBook 450 G1 Notebook PC
    I hope this helps!
    Malygris1
    I work on behalf of HP
    Please click Accept as Solution if you feel my post solved your issue, it will help others find the solution.
    Click Kudos Thumbs Up on the right to say “Thanks” for helping!

  • X220 Sudden shut down and will not turn back on

    I have a Thinkpad X220 Tablet. It has worked fine the last 1.5 years. It recently shut down suddenly, no shutting down screen or warning, just straight to black. The battery was full and it was plugged in. It will not turn on and when plugged in with the AC adapter no lights come on. I have no idea how to go about fixing this or what could be causing this. Any advice would be greatly appreciated. 

    Hi Zevain,
    Welcome to Lenovo Community Forums!
    I’m sorry to hear that your Lenovo ThinkPad X220T is not powering on.
    I would suggest you to perform Flee Power – remove the battery and any other peripheral device connected to the computer. Hold the power button for 10-15 seconds and then connect only the AC Adapter and try to turn ON the computer.
    Swap the battery and AC adapter with a good known one if you can to check if it’s a battery/adapter failure. Take out the memory, start the system and check if you hear beep sounds.
    Please let me know the happenings!
    Best regards,
    Mithun.
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • My new LG G 8.3 pad will not turn on.

    I've only had it two weeks and used it maybe a dozen times.  Yesterday it still  have a significant charge when I stopped using it and today it will not turn on.  I've plugged it in using the charger that came with it and another charger and it still won't turn on.  This seems to be an issue with this pad.  How can I get it to work?

        I'm sorry you're having issues with your tablet ssnowandsurf . I know its frustrating. I recommend checking the charging port on your tablet to ensure its not loose or damaged. Are there any problematic apps on  your tablet? If so, when you are able to turn it on, remove those to check if that will resolve the issue. Keep us posted.
    KinquanaH_VZW
    Follow us on Twitter @vzwsupport

  • Toshiba Encore 2 WT10-A264 will not turn on.

    hello
    first of all i bought new tablet( Toshiba Encore 2 WT10-A264 ) 3 months ago...
    3days ago
    I had connected tablet into charger at night. and i slept well
    In the morning... it wasn't turned on
    and it continues untill now....
    it doesn't work, it will not turn on....
    how can i solve this problem...?
    Solved!
    Go to Solution.

    Press the power button and hold for at least thirty seconds. Then release, wait a few seconds, and press the button again briefly. See if this works.....

  • LG G Pad 8.3 Tablet won't turn on

    I see a few threads where people have had problems with their LG G 8.3 LTE tablet not powering on.
    Mine worked fine yesterday, and I don't think the battery level was super low, but I might be wrong. My old apple devices had to charge for a bit when the battery was completely dead, are the LG products the same way?
    This tablet is essentially brand new, it's never even left the house, much less had any damage at all. It's probably been used less than a dozen times.
    Really hoping that it's not dead. I plugged it into the charger than came with it, and also into the USB port of my computer (at someone's suggestion). So far, nothing.

    tbo27 wrote:
    https://community.verizonwireless.com/mobile/mobile-access.jspa#jive-content?content=%2Fapi%2Fcore%2Fv3%2Fcontents%2F1942808
    The desktop version of the link is a little easier to follow. Re: LG G 8.3 Tablet won't turn on.

Maybe you are looking for

  • Not Able to Generate Out of the Report by adding the new 2 fields

    Hi, I'm Very new to ABAP. I have created one report. after 2 new fields added they are EKNAM and EKGRP. The Thing is the remaining fields are displaying in the output. The Newly added fields are not displaying the out. I was able to add this 2 fields

  • Updates for Remote Desktop via App Store Software Update

    Hello, and Happy Thanksgiving. On a computer running Mavericks, I installed Apple Remote Desktop 3.5 from the disk (not from the App Store.) On it's first startup, I was greeted with the message "The Remote Desktop Administrator software must be upgr

  • Table maintanance generator.........

    Hi, I heard that client will be able to access ztable through tablemaintanance generator(tmg).so What operations the client  can be done in tmg for the ztable purpose. Plz provide me any exact answers. i ma posting this questn after completn of searc

  • Bad Quality of Fade to black

    Hi everybody! I have a problem with Encore/Premiere Pro CS3. I created a sequence in Premiere and send it via "Export to encore" to Encore. It was a DV movie and I chose "PAL High Quality" for the convertion. Most of the video is fine but when there

  • Alert Message on Quick Campaign Create

    Hello All, I am using CRM 2013. We have an requirement. Where, wanted to get an alert/confirmation message ("Campaign Created Successfully.") on click of the Create button as shown below : I am not getting the way to do this. Please suggest me, How I