Tablet Mode stuck in a loop
I just installed the Technical Preview (build 10041) on my Asus Vivo Tab Note 8, but after enabling tablet mode and resuming from sleep the computer has become unusable, it looks like it's stuck in a loop enabling, then disabling tablet mode, even after
restarting the machine it starts happening again straight after logging in.
Here's a video showing what's going on:
https://onedrive.live.com/redir?resid=2cd58d1f09ca931d!184023&authkey=!AGVt6U6kaiwNwUw&ithint=video%2cmp4
I can get the Task Manager with the keyboard shortcut, or Run box, so can open the Command Promt and so on. But it doesn't let me open the Notification Pane, or Settings, or even open the Start Menu.
Is there any way to disable tablet mode from the command prompt, or anything else I can do?
can see the process ID for explorer.exe constantly changing in task manager as well.
If it is crashing then it would be losing all state information, so you couldn't do what I suggested about stepping through it using keystrokes. Can you confirm that it is crashing using Event Viewer or Reliability Monitor?
So perhaps a better tack would be to figure out how to disable the automatic recovery that is apparently happening. Then you could restart explorer.exe elevated using Task Manager. However, I'm not sure if the Settings page would still open
then. TBD.
Is there a Registry key I can edit I wonder?
Good idea. I could try using ProcMon to see what changes when I switch modes. I haven't loaded ProcMon on this VM yet so that will be a good thing to do anyway. Even better than "editing the registry" though would be to find out
if PowerShell knows anything about this. Of course it could substitute as our regedit.exe anyway.
Otherwise, I wonder if "Tablet mode" works any differently in Portrait orientation? <eg>
A related test: use Magnifier in its Fullscreen view. Win++ Ctrl+Alt+F and enable full tracking. (Win+Esc exits Magnifier.)
Robert Aldwinckle
Similar Messages
-
Hello everybody .. I have had this issue since yesterday afternoon.. Some people are saying to keep restoring again and again until it finally goes through.. I have done so like 10 times on my MAC and then I used my husband's PC and tried it 4 times.. No success.. I called apple support, but no help came from there at the end, and the only thing they were able to suggest to me is to sell me a new phone just like mine for a discounted price..
Anyways after about 18h of search and stress I came across this link:
http://techglobex.blogspot.com/2012/06/downgrade-from-ios-6-beta-firmware-to.htm l
That will only make it possibe to go backward.. You will end up back with the IOS 5, but at least you will have a working phone and it will bring back all your contacts and everything else that you ever had backed up on icloud and on your computer. There might be descripencies with the Applications but again this is an issue easily solved, you can always download them back.
Two more things: One, you do not have to download the old version of the itunes, the newest version worked for me without any issues
When choosing to download the older IOS 5.1.1, you will need to figure out whether your carrier is GSM or CDMA but you can easily google this info online..
Well hope that will work for you like it did for meHello jaideniv,
Thank you for using Apple Support Communities!
First I would recommend this article named Can't connect to the iTunes Store found here http://support.apple.com/kb/TS1368. It will get you started with troubleshooting iTunes Store connection issues on the computer and the phone.
If needed there is a more advanced article named iTunes: Advanced iTunes Store troubleshooting found here http://support.apple.com/kb/TS3297 that I would next recommend.
Take care,
Sterling -
Yoga 2 13 stuck in tablet mode
Hello,
I just received a new Yoga 2 13, 8Gb, 256Gb SSD. I have been using it exclusively as a laptop.
It worked just fine for a few days. I did notice once the screen flipped sideways and the keyboard turned off randomly but after turning the laptop on its side and back, everything went back to normal.
Today, after closing the lid and putting the machine to sleep, then waking it up, it awoke in tablet mode with the sideways screen and turned off keyboard. To do anything I have to use the on-screen keyboard, which does work.
Nothing I did could get it to go back to laptop mode, or for autorotate to ever work. Rebooted several times, no. The "Lenovo" signage does show correctly in landscape as soon as the machine turns on, but once it gets to the login window, it's back to sideways tablet mode.
The auto-rotate button (which I had never touched prior) doesn't appear to do anything. I click the button, it says "autorotate off" then I click it again to "autorotate on" and still no rotation.
I called Lenovo technical support, and he tried (after remote desktoping into my machine) to try a different display driver. The Windows "Basic" Driver, the Intel Driver from March 2014, and the latest Lenovo display drivers downloaded did nothing.
He turned off "ycp" or something similar as a startup service, no help.
In Screen Resolution, he changed the orientation of the display from portrait to landscape which did fix the orientation problem but did nothing about the keyboad. I assume this is a brute force solution which does not fix the underlying "endless tablet mode" issue.
Finally, he had me boot into the BIOS. Interestingly, the keyboard works just fine in the BIOS screen, and the orientation is the correct landscape. WHAT?!!
But bottom line, tech support failed to find a fix for the problem. Can I ask any of you for some additional ideas?
Thank you so much!I got lucky after multiple times of trying. It is back on Sync'ing.
-
Ipad will not charge. Stuck in reboot loop.
Hello,
I have an iPad with retina display, 32gb, AT&T.
A few days ago the iPad was left over night with about a 45% charge. The next morning the iPad battery was dead. I plugged it into the wall charger and left for the day. When I came home it still wasn't showing a charge. It seems to want to reboot, but it's stuck in a loop between thowing the red battery and the apple logo, then my home screen picture flashes and it goes back to the red battery. The iPad has been plugged in tthe entire time.
Thanks in advance,
LinvelCould be the charger, cable or iPad. Plug the USB cable into your computer. It may say "Not Charging", however, it is charging slowly and will verify that the cable is good.
Try this first - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
The quickest way (and really the only way) to charge your iPad is with the included 10W or 12W (5W on Mini) USB Power Adapter. iPad will also charge, although more slowly, when attached to a computer with a high-power USB port (many recent Mac computers) or with an iPhone Power Adapter (5W). When attached to a computer via a standard USB port (2.5W, most PCs or older Mac computers) iPad will charge very slowly (but iPad indicates not charging). Make sure your computer is on while charging iPad via USB. If iPad is connected to a computer that’s turned off or is in sleep or standby mode, the iPad battery will continue to drain.
Apple recommends that once a month you let the iPad fully discharge & then recharge to 100%.
How to Calibrate Your Mac, iPhone, or iPad Battery
http://www.macblend.com/how-to-calibrate-your-mac-iphone-or-ipad-battery/
At this link http://www.tomshardware.com/reviews/galaxy-tab-android-tablet,3014-11.html , tests show that the iPad 2 battery (25 watt-hours) will charge to 90% in 3 hours 1 minute. It will charge to 100% in 4 hours 2 minutes. The new iPad has a larger capacity battery (42 watt-hours), so using the 10W charger will obviously take longer. If you are using your iPad while charging, it will take even longer. It's best to turn your new iPad OFF and charge over night. Also look at The iPad's charging challenge explained http://www.macworld.com/article/1150356/ipadcharging.html
Also, if you have a 3rd generation iPad, look at
Apple: iPad Battery Nothing to Get Charged Up About
http://allthingsd.com/20120327/apple-ipad-battery-nothing-to-get-charged-up-abou t/
Apple Explains New iPad's Continued Charging Beyond 100% Battery Level
http://www.macrumors.com/2012/03/27/apple-explains-new-ipads-continued-charging- %20beyond-100-battery-level/
New iPad Takes Much Longer to Charge Than iPad 2
http://www.iphonehacks.com/2012/03/new-ipad-takes-much-longer-to-charge-than-ipa d-2.html
Apple Batteries - iPad http://www.apple.com/batteries/ipad.html
iPhone: Hardware troubleshooting (Power/Battery section also applies to iPad)
http://support.apple.com/kb/TS2802
http://www.overthought.org/blog/2014/the-ultimate-guide-to-solving-ios-battery-d rain
http://www.overthought.org/blog/2014/the-ultimate-guide-to-solving-ios-battery-d rain
Extend iPad Battery Life (Look at pjl123 comment)
https://discussions.apple.com/thread/3921324?tstart=30
iOS 7 Battery Life Draining Too Fast? It’s Easy to Fix
http://osxdaily.com/2013/09/19/ios-7-battery-life-fix/
Poor battery life after installing iOS 7.1? Try these simple tips
http://www.zdnet.com/poor-battery-life-after-installing-ios-7-1-try-these-simple -tips-7000027348/
New iPad Slow to Recharge, Barely Charges During Use
http://www.pcworld.com/article/252326/new_ipad_slow_to_recharge_barely_charges_d uring_use.html
iPad: Charging the battery
http://support.apple.com/kb/HT4060
Best Practices for iPad Battery Charging
http://www.ilounge.com/index.php/articles/comments/best-practices-for-ipad-batte ry-charging/
How to Save and Prolong the battery life of your new ipad
https://discussions.apple.com/thread/4480944?tstart=0
Prolong battery lifespan for iPad / iPad 2 / iPad 3: charging tips
http://thehowto.wikidot.com/prolong-battery-lifespan-for-ipad
iPhone, iPod, Using the iPad Charger
http://support.apple.com/kb/HT4327
Install and use Battery Doctor HD
http://itunes.apple.com/tw/app/battery-doctor-hd/id459702901?mt=8
To Extend a Device’s Battery Life, Get to Know It Better
http://tinyurl.com/b67c7xz
iPad Battery Replacement
http://www.apple.com/batteries/replacements.html
In rare instances when using the Camera Connection Kit, you may notice that iPad does not charge after using the Camera Connection Kit. Disconnecting and reconnecting the iPad from the charger will resolve this issue.
Cheers, Tom -
How to recover ALOM Main Flash (ReFlash EPROM) ? -- ALOM stuck in a loop
Hello,
I had an issue while flashing the ALOM Main Flash of a Sun Fire v210.
Now the ALOM boot is stuck in a loop trying to load the main ALOM image.
As a result the ALOM Main Flash is broken but I can still access the
ALOM Boot Menu. I can also boot Solaris with the Jumper on FP2 or FP3
but it does not recognize the SC anymore.
Is there a way to recover it from Solaris and/or using the
"f - Wait for flash download from host" from ALOM boot menu ?
ERROR ON ALOM Boot
Failure: CRC Error - ReFlash EPROM.
Main Sectors FLASH CRC Test, FAILED.
ERROR ON "OK >"
ERROR: ERROR: Unable to open the SC device.
ERROR ON SOLARIS
WARNING: DP_GET_SDP_VERSION failed, ret=4
scadm: The SC hardware could not be initialized.
MORE INFO:
ALOM LOOP:
ALOM - POST run incomplete previously, no POST this time
ALOM BOOTMON v1.6.10
ALOM Build Release: 001
Reset register: f0000000 EHRS ESRS LLRS SWRS
Check for Handshake
Returned from Boot Monitor and Handshake
Clearing Memory Cells
Memory Clean Complete
Loading the runtime image...
ALOM - POST run incomplete previously, no POST this time
ALOM BOOTMON v1.6.10
ALOM Build Release: 001
Reset register: e8000000 EHRS ESRS LLRS CSRS
Check for Handshake
Returned from Boot Monitor and Handshake
Clearing Memory Cells
Memory Clean Complete
Loading the runtime image...
ALOM - POST run incomplete previously, no POST this time
JP2 1-2 IN ALOM Flash Recovery
JP3 1-2 IN ALOM Reset
JP12 1-2 IN ALOM Console Bypass
http://www.sunshack.org/data/sh/2.1.2/infoserver.central/data/syshbk/Devices/System_Board/SYSBD_SunFireV2x0_CPU.html
Executing Power On Self Test
0>
0>@(#)Sun Fire[TM] V210/V240,Netra[TM] 210/240 POST 4.30.4.a 2010/01/06 15:10
/export/delivery/delivery/4.30/4.30.4.a/post4.30.4-micro/Fiesta/enxs/integrated (root)
0>Copyright 2010 Sun Microsystems, Inc. All rights reserved
0>OBP->POST Call with %o0=00000800.01014000.
0>Test CPU Caches....Done
0>Functional CPU Tests....Done
0>IO-Bridge Tests....Done
0>INFO:
0> POST Passed all devices.
0>
0>POST: Return to OBP.
Configuring system memory & CPU(s)
Probing system devices
Probing memory
Probing I/O buses
Sun Fire V210, No Keyboard
Copyright 2010 Sun Microsystems, Inc. All rights reserved.
OpenBoot 4.30.4.a, 8192 MB memory installed, Serial #********.
Ethernet address *:*:*:*:*:*, Host ID: ********.
Running diagnostic script obdiag/normal
Testing /pci@1e,600000/ide@d
Testing /pci@1e,600000/isa@7/rtc@0,70
Testing /pci@1c,600000/scsi@2
Testing /pci@1c,600000/scsi@2,1
Testing /pci@1e,600000/isa@7/serial@0,2e8
Testing /pci@1e,600000/isa@7/serial@0,3f8
ERROR: ERROR: Unable to open the SC device.
ERROR: ERROR: Unable to open the SC device.
Rebooting with command: boot
Boot device: disk File and args:
SunOS Release 5.10 Version Generic_141444-09 64-bit
Copyright 1983-2009 Sun Microsystems, Inc. All rights reserved.
v210 console login:
WARNING: DP_GET_SDP_VERSION failed, ret=4
WARNING: DP_GET_SDP_VERSION failed, ret=4
v210:~# cd /usr/platform/`uname -i`/lib
v210:/usr/platform/SUNW,Sun-Fire-V210/lib# /usr/platform/`uname -i`/sbin/scadm
download boot alombootfw
scadm: The SC hardware could not be initialized.
LOM <ESC> Menu
f - Wait for flash download from host.
C - Copy Boot Monitor from FLASHBOAT.
j - Jump to main code (at 0x01010000).
m - Run POST Menu.
(Do not try this after a flash update of the boot monitor!)
d - play DOOM
s - Set clock speed
e - Set external and internal console serial ports baud rate
i - Set internal control serial port baud rate
t - Toggle 'OK' flag
R - Reset SC
b,h,w - Read byte/halfword/word
B,H,W - Write byte/halfword/word
r - Return to bootmon
Your selection: m
ALOM POST 1.0
Status = 00007fff
Returned from Boot Monitor and Handshake
ALOM POST 1.0
- MENU MODE
Status = 00000020 I-Cache OFF Loop Mode OFF
System configured with a 50 MHz Clock
1 TTY External - Internal Loopback Test
2 TTYC - Internal Loopback Test
3 TTYD - Internal Loopback Test
4 TTY C to D - AFT Mode Loopback Test
5 TTY D to C - AFT Mode Loopback Test
6 Memory Data Lines Test
7 Memory Address Lines Test
8 Instruction CACHE Test
9 Data CACHE Test
A Memory Cells Test
B Boot Sector FLASH CRC Test
C Main Sectors FLASH CRC Test
E FULL_POST_TEST
X Exit to Main Menu
T Bring up the TOOLBOX Menu
Select a command by entering: 1 - E, X or T
Boot Sector FLASH CRC Test
Boot Sector FLASH CRC Test, PASSED.
1 TTY External - Internal Loopback Test
2 TTYC - Internal Loopback Test
3 TTYD - Internal Loopback Test
4 TTY C to D - AFT Mode Loopback Test
5 TTY D to C - AFT Mode Loopback Test
6 Memory Data Lines Test
7 Memory Address Lines Test
8 Instruction CACHE Test
9 Data CACHE Test
A Memory Cells Test
B Boot Sector FLASH CRC Test
C Main Sectors FLASH CRC Test
E FULL_POST_TEST
X Exit to Main Menu
T Bring up the TOOLBOX Menu
Select a command by entering: 1 - E, X or T
Main Sectors FLASH CRC Test
ALOM POST 1.0
- MENU MODE
Status = 00007fff I-Cache ON Loop Mode OFF
System configured with a 50 MHz Clock
ERROR: ALOM POST TEST
H/W under test = Flash Memory Data
Test name = FLASH CRC Test
Subtest name = Main Sector Flash Test
Failure: CRC Error - ReFlash EPROM.
EPROM CRC: 08d743fc Calced CRC: 26469a8f
END_ERROR
Main Sectors FLASH CRC Test, FAILED.
ALOM <ESC> Menu
f - Wait for flash download from host.
C - Copy Boot Monitor from FLASHBOAT.
j - Jump to main code (at 0x01010000).
m - Run POST Menu.
(Do not try this after a flash update of the boot monitor!)
d - play DOOM
s - Set clock speed
e - Set external and internal console serial ports baud rate
i - Set internal control serial port baud rate
t - Toggle 'OK' flag
R - Reset SC
b,h,w - Read byte/halfword/word
B,H,W - Write byte/halfword/word
r - Return to bootmon
Your selection: d
OK. You're DOOMED!Anybody knows if the source code of scadm tool is available somewhere ? (opensolaris etc. ?)
I don't have any additional advice to offer other than asking that you to try the flash-update all over again,
one more time, as if it were the beginning again.Yes but how because the SC is not discovered anymore by Solaris :
"rmclomv: WARNING: DP_GET_SDP_VERSION failed, ret=4"
"The SC hardware could not be initialized."
Can you try to flash the mainalomfw ? Your log contained only the flash of the alombootfw !
/usr/platform/`uname -i`/sbin/scadm download alommainfw
I guess jumper JP2 allows to recover from a failed flash by selecting the un-touched half the PROM.It does not work as the SC is not responding anymore to Solaris
Sun Microsystems Inc. SunOS 5.10 Generic January 2005
v210:~#
v210:~# cd /usr/platform/`uname -i`/lib/images
v210:/usr/platform/SUNW,Sun-Fire-V210/lib/images# /usr/platform/`uname -i`/sbin/scadm download alommainfw
scadm: The SC hardware could not be initialized.
v210:/usr/platform/SUNW,Sun-Fire-V210/lib/images#
ERROR: ERROR: Unable to open the SC device.
It's a pitty that obtaining OBP/ALOM updates requires a service contract. I got a V210 recently.
Unfortunately both OBP and ALOM are the intial release 4.8.2 / 1.0.I agree but it's probably also because you need support in case it fails ;-)
Thanks for your answers! -
Two "cursors" when in tablet mode
X61 tablet, Windows 7, RC1, 64 bit. , pdfannotator, onenote, office
When using the the tablet in tablet mode (screen folded down), I often will get two cursors on the screen when the pen is near or on it. This happens in various application software, but usually begins after using the eraser, or the flyout keyboard and tablet input menu.
The extra cursor appears above, and to the right of the actual cursor. Actual cursor being a pen tip "dot" while the extra cursor is a random symbol, ranging from another offset dot, to a very dark right click ring, to a very dark hourglass, to an i-beam shaped bar. It happens immediately when using grahl's pdf annotator, but has showed up in other programs as well including onenote, after using the flyout input panel in word, and a number of other programs.
I'm certain it has something to do with the tablet multitouch drivers, escpecially since the drivers for 7 seem to be a wacom dual-touch driver not designed specifically for the X61. Anyone else run into this trouble and come across a solution?This is what Microsoft Support told me to do, and it worked, but I am stuck with a boring standard mouse cursor in Windows (no special Tablet PC cursors - for right click, etc.)
Step 1:
1. Open Local Group Policy Editor:Run... gpedit.msc
2. Navigate to User Configuration - Administrative Templates - Windows Components - Tablet PC - Cursors
3. Enable the Turn off pen feedback setting.
Step 2:
Go to Control Panel. Double click on Mouse. Find "Mouse Properties"
Go to "Pointer Options". Put a check mark in the "Display Pointer trails"
Slide the bar over to "short". Apply the changes and then restart PDF Annotator.
I'm awaiting Microsoft's reply as to whether there is some way to keep my original cursors without having the PDF Annotator problem. -
My iPod touch is disabled with error message to log into ITunes. I log in to ITunes and it does not recognize device as ITouch is disabled. Im stuck in a loop...?
Any assistance is greatly appreciated.Connect the device to your iTunes library in Recovery Mode using the instructions in this Apple support document. From there restore it factory defaults.
http://support.apple.com/kb/ht1808
B-rock -
IPhone 4s stuck in recovery loop and is not detected in iTunes?
Earlier today i plugged my phone into my computer. I didn't transfer any files when i plugged it into itunes. I then backed up my phone, and decided to update it to 6.1.4. My computer took a couple of minutes to download it and then it was applying the update. My phone's screen went black during the process. Then iTunes gave me an error message saying that my phone could not be updated. So i try to turn on my phone and the apple logo appears and a couple of seconds later it shows the usb cable connecting to itunes. I've tried rebooting and putting it into DFU mode but nothing works. iTunes wont recognize it as a device needing to be restored. iTunes wont detect my phone at all and its stuck in a loop. I have tried everything and it wont work.
Was the phone jailbroken or hacked? That will do it especially if DFU mode doesn't work.
-
Im stuck in a loop can any1 help
im stuck in a loop can any1 help me
Does it boot to Single User Mode, CMD+s keys at bootup, if so try...
/sbin/fsck -fy
Repeat until it shows no errors fixed.
(Space between fsck AND -fy important).
http://www.westwind.com/reference/os-x/commandline/single-user.html
Any change? -
My ipod nano 7th gen is stuck on a loop of turning on and off.
My ipod nano 7th gen is stuck on a loop of turning on and off, I've already done the reset, and everything that was recommended on other similar questions. it isn't recognized by iTunes except in recovery mode where it allows me to restore but then goes right back to turning on and off once i'm back to normal play mode. Once on recovery mode it works fine and doesn't turn on and off. I've also uninstalled and reinstalled itunes to avail. I'm super frustrated and am hoping that I won't need to buy a new one. Is there anything else I can do before i just toss it out? i'm getting a bit frustrated just watching my ipod turn on to the apple and then turn right back off.
Hi there tksunrise,
You may find the troubleshooting steps in the article below helpful.
iPod nano (7th generation): Hardware troubleshooting
http://support.apple.com/kb/TS4433
Will not turn on or screen remains dark
Connect iPod to power for at least ten minutes to ensure that the battery has enough charge to allow iPod to turn on.
If iPod does not turn on after ten minutes, try resetting it while it is still connected to power. Reset the iPod by holding down the Sleep/Wake button and the Home button for at least six seconds or until you see the Apple logo appear.
If the Apple logo appears on the display, connect iPod to a computer and verify that it appears in iTunes and can play music. If iPod appears in iTunes and can play music, no further troubleshooting is needed.
If the screen remains dark and will not turn on, then your iPod may need service.
Issue not resolved
If the issue is still not resolved, please read this information on servicing your iPod.
-Griff W. -
Ipod Touch 4g stuck in infinite loop?
I accidentally left my iPod touch 4g on all night on an alarm clock app. When I woke up it was stuck on a loop where it goes to the lock screen for 2 seconds and then back to a black screen with an apple on it for 6 seconds. I can not get it out of this loop this sequence flashes back and forth continually until the ipod runs out of battery. I can still sync the iPod and it is still recognized by the computer. I have tried restarting it and turning it off doesn't work. I have even restored the iPod's software and it still doesn't get out of this loop. Please help me!!Try the recovery mode as a last resort:
see this support article http://support.apple.com/kb/HT1808
Good Luck
Léonie -
TS3694 Apple 4s stuck in a loop and not restoring or updating Help please!!!!
Apple 4s stuck in loggo loop and not restoring or updating. I have tryed all the recomended stuff all the youtube video EVRYTHING!!!!! I cant think of any reasone for it to not work .one minuet it was playing music on my sterio and the next this loggo loop. HELP PLEASE!! **** YOU APPLE!!!!
Maybe:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar
Or
Restore loop (being prompted to restore again after a restore successfully completes)
Troubleshoot your USB connection. If the issue persists, out-of-date or incorrectly configured third-party security software may be causing this issue. Please follow Troubleshooting security software issues. .
Next try placing in DFU mode and then restoring.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
Then try restoring on another computer.
Last, make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar -
New 5th gen touch stuck in Recovery loop at set up
I just got a new Touch and have been in the process of trying to get it set up with iTunes. I started out doing a restore from back up, but now I'm stuck in a loop where I get a message that "iTunes has detected an iPod in recovery mode. You must restore this iPod before it can be used with iTunes." When I restore, it spends an hour downloading iPod software and then I get this same message again. (It will apparently do this ad infinitum.) I do have the most current version of iTunes installed. I've tried turning the iPod on and off, disconnecting and reconnecting it, and resetting it. I've tried different USB ports. I've rebooted the computer. Nothing changes.
Any ideas for what else to try? Thanks!Maybe:
Restore loop (being prompted to restore again after a restore successfully completes)
Troubleshoot your USB connection. If the issue persists, out-of-date or incorrectly configured third-party security software may be causing this issue. Please follow Troubleshooting security software issues. .
Next try placing in DFU mode and then restoring.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
Then try restoring on another computer.
Last, make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar -
Help! Ipod touch 5g stuck in recovery loop and cant restore
Hi. I have an ipod touch only a few weeks old. All was fine, but last week I started to experience dramatic reductions in battery life (flat in 12hrs, even if properly powered off).
I now have the "connect to itunes" logo on the screen and the ipod is not working.
Connecting to itunes, it requires a restore, but I am stuck in a loop of downloading, not recognising and then starting again.
I can see the file (all 900mb of it):
C:\Users\J\AppData\Roaming\Apple Computer\iTunes\iPod Software Updates\iPod5,1_6.0.1_10A523_Restore.ipsw
But it just keeps re-downloading everytime I click restore - even though the file is already there. During the download, I think the ipod/itunes connection disconnects and then reconnects as you get a new "ipod in recovery mode warning".
Considering this file is nearly a gb I am reluctant to try any more. Is there a way I can force it? The ipod is otherwise not working at all now.
I have turned off my firewall per the advice elsewhere on here.
Cheers
JamesWow. I solved this.
To force the restore after downloading, but without the downloading again:
- Disconnect and then reconnect the ipod (important in my case)
- Hold the shift key and then click "Restore" SUPER SECRET or what!
- Navigate to the file as per the above.
Hope the restore happens before the next disconnect (did in my case)!
Sorted.
Now I hope my battery lasts better than before - was going flat overnight, even if turned off properly..... -
Ipod touch 3g 64gb stuck in boot loop
I have an ipod touch 3rd generation 64gb and its stuck in boot loop. how do i fix this?I
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar
Maybe you are looking for
-
How to save resized photo in the event
I am having trouble saving my resized photo in my event. When I open an event, choose the photo I want to resize, and use the export feature, I am unable to choose my event as a place to save to. Any suggestions. What I end up doing is saving it some
-
Is the ProBook 4520s eSATA port multiplier compatible
I have an HP ProBook 4520s running Windows 7 64 bit. Is the eSATA port compatible with port multiplier products? If not, is there any hardware I can purchase to solve this? This is a quote from the external eSATA enclosure that I'm trying to run. Q O
-
You Tube Widget - Flash Security Settings
Hello, I managed to embed sucessfully a You Tube video by using flash factor widget. It works when published to a web server no problem. However it looks like anybody else who views it has to adjust their flash security settings. Is there away arou
-
Using iSync on Panther and Tiger
Hello, I iSync happily between .Mac machines running Tiger. I'm planning to set up a machine running Panther (so that I can run Epicad SyncAgain) and want to run iSync 1.5 to sync contacts, events and tasks on that machine with my .Mac account. Will
-
Why I can't restore mail backup from Mountain Lion on Maverick ?
When I use Time Machine to restore my old mails, it doesn't works, shows the backups on the right but I can't click. The Backup was made on Mountain Lion and I installed a clean Maverick.