Tablet screen works only when using power lead

Hi my screen on my tablet only works when its connected to the mains power

What tablet do you have exactly?
Regarding the screen issue:
Do you have an problem only with the screen or there is an general table problem using the battery?

Similar Messages

  • HT201401 Microphone works only when using the phone in hands-free

    Microphone works only when using the phone in hands-free (speaker on) mode.  Otherwise, only a constant buzz, accompanied by regular clicks (repeating 2-3 times/sec) can be heard by called persons or when recording a memo.  Makes Siri unusable, and cannot make private calls unless in a private area.  Does anybody have a fix for this?

    Okay I just solved the problem myself..
    For anyone that may have the same issue:
    The microphone used when recording video, is the little dot next to the jack on top of the iPhone 4S (maybe also iPhone 4, don't know). There was some dirt in this tiny little hole, and I simply just removed it with a very thin needle, and now it works great!

  • My touch pad does not work only when using Safari browser. The screen was grey. Help!

    My touch pad does not work only when I use Safari browser online. The screen was grey. No matter what I do, there is no reponse. Only the web address box works. What is this problem? I can use App Store and everything else fine.
    Someone please help.
    Thanks

    I would try:
    - Resetting the iPod:
    Reset iPod touch:  Press and hold the On/Off Sleep/Wake button and the Home
    button at the same time for at least ten seconds, until the Apple logo appears.
    - Go to Settings>Safari and delete cache, history and cookies.

  • Burned Image on screen, but only when using Safari

    I have a burned image on my IPhone's screen, but only when I use Safari. Additionally, when I open Safari's multiple window viewer feature, the image is there as well. The home screen and every other app is unaffected. Turning off and on the phone does nothing to fix the problem.
    I know removing the casing and battery is an adventure, so I am trying to avoid it if I can.
    Can anyone think of a way to fix this problem?
    Thanks for the help.

    Troubleshoot Safari extensions ..
    From the Safari menu bar click Safari > Preferences then select the Extensions tab. Turn that OFF, quit and relaunch Safari to test.
    If that helped, turn one extension on then quit and relaunch Safari to test until you find the incompatible extension then click uninstall.

  • E-mail Reply function no longer works -- only when using Firefox. Gives blank compose screen. Have tried settings changes. Have un and re installed firefox.

    Problem does not occur when using a different browser.

    Is it Yahoo! mail?? Many users have discovered all kind of problems and glitches with Yahoo! mail in Firefox when using an old bookmark saved before Yahoo!'s recent server changes.
    I suggest clearing your Yahoo cookies and entering through the main page to get a better address for your current mail server.
    To remove your Yahoo cookies -- save any pending work first -- call up the Cookies dialog while viewing any page on yahoo.com (or your Yahoo site). You can use either:
    * right-click the page > View Page Info > Security > "View Cookies"
    * Tools menu > Page Info > Security > "View Cookies"
    In the dialog that opens, you can remove the site's cookies individually.
    Then go to one of these Yahoo addresses and click on login or mail from there:
    * Yahoo home page: https://www.yahoo.com/
    * My Yahoo page: https://my.yahoo.com/
    * General mail redirect: https://mail.yahoo.com/
    * AT&T users: http://att.yahoo.com/
    * Other country sites (not on .com): the main Yahoo page for your country
    Does that help?

  • Why does my iMac screen flicker only when using Safari? It doesn't happen with Firefox.

    Yesterday, I had an issue with OS X, causing my screen to go black upon waking up my pc. Come to find out through the Apple Forum, that when the OS X was originally installed, it was not a complete install. Once I received the fix solution, completing the OS X install, (10.9.3) everything was back to normal, so it seemed.
    Now, when using Safari, the whole page flickers and so forth, including the address bar. I never had problems with the screen prior to this. Also, it doe not occur when using Firefox.
    Is there a fix for this? or an adjustment that can be made. This never happened prior to the OS X install, which was about 2 months ago.

    Troubleshoot Safari extensions ..
    From the Safari menu bar click Safari > Preferences then select the Extensions tab. Turn that OFF, quit and relaunch Safari to test.
    If that helped, turn one extension on then quit and relaunch Safari to test until you find the incompatible extension then click uninstall.

  • AD is NOT working only when using SMB

    We have all our user account defined in Active Directory. Our Xserve (10.4.9) is bound to the AD using the forest and domain name. (With "Creat mobile account" enabled)
    All Mac end-users can mount AFP shares and using Jabber iChat with their AD account name and password.
    But when Windows user tried to mount the shared points with their AD account, they always got message saying "User name or password is not correct", but we know they are using the right name and password. The only way Windows users (or Mac users using SMB://server_name) can access SMB shares are the local users. NO AD users can use SMB.
    The same AD users can use AFP just fine.
    Anyone might have any suggestion is greatly appreciated.
    Regards.

    Many site issues can be caused by corrupt cookies or cache. In order to try to fix these problems, the first step is to clear both cookies and the cache.
    Note: ''This will temporarily log you out of all sites you're logged in to.''
    To clear cache and cookies do the following:
    #Go to Firefox > History > Clear recent history or (if no Firefox button is shown) go to Tools > Clear recent history.
    #Under "Time range to clear", select "Everything".
    #Now, click the arrow next to Details to toggle the Details list active.
    #From the details list, check ''Cache'' and ''Cookies'' and uncheck everything else.
    #Now click the ''Clear now'' button.
    Further information can be found in the [[Clear your cache, history and other personal information in Firefox]] article.
    Did this fix your problems? Please report back to us!

  • Dead spots on touch screen, but only when using text or safari

    For some reason my phone has dead spots, which CHANGE although one thing is consistent. I cannot press "send" on a message unless I am replying to a text straight away. I cannot initiate and then send.
    What is stranger, is that if i pull up the SAME keyboard on the facebook app, it works perfectly.
    So far i have tried recalibrating, resetting and restoring the phone to no effect. If has not been in water (unless splashed unbeknowns to me)
    Has anyone had a similar issue and how did they fix it? My iphone is 3rd gen so no warranty but was in perfect working order until yesterday.

    I can certainly understand your frustration. I have not heard of any other cellphone or PDA manufacturer that gives out free loaners while their equipment is being replaced. Although I have certainly heard about this practice in BMW and Mercedes dealerships, the cellphone/PDA industry is a little different.
    I am surprised they had never heard of the problem, which probably means they have never visited this forum. I have read many posts regarding this problem, and if a reset/restore doesnt do the trick, it has always required repair or replacement.
    Its the same with a Treo or a Motorola Q or a Blackberry. It is not reasonable to expect the manufacturer (Palm, Motorola, etc) to provide free loaners. The cost for this "free" service would inevitably have to be passed on to all buyers. I have a cheapy GSM phone in a drawer I use to stick my SIM card in when I don't want to use my iPhone, or in the event I have to send it in for repair. Having that alternative is my responsibility, not Apple's.
    Now that I think of it, Palm doesnt even rent loaners. I would have been stuck with NOTHING had my Treo required service. At least Apple gives me a better choice.
    That's another spin on it.

  • Pc repair pc keeper and media player 12.2 are blanketing my screen and only when using firefox

    what the hell has happened to the formerly secure firefox? I cant even use it without all the above mentioned crap overwellming my computer

    Please continue this at your original question. Thank you
    https://support.mozilla.org/en-US/questions/1055713

  • Mac book pro (late 2013) has a lag when sculpting and rotating models in Zbrush only when using my Wacom-capture tablet (if I use a mouse or trackpad its fine no lag). Also Premiere Pro CS5, playback is almost like watching footage in slow motion.

      Mac book pro (late 2013) has a lag when sculpting and rotating models in Zbrush, but only when using my Wacom-capture tablet (if I use a mouse or trackpad its fine no lag).
       Also Premiere Pro CS5 playback is almost like watching footage in slow motion, Premiere Pro is installed on the main drive but the footage is on an external drive connected with USB 2.
      I'm wondering if it is just a problem with the Mac USB drivers maybe not supporting USB 2 ? (Because I have also installed Window 7 on this same MacBookPro and tested the same software "Zbrush and Premiere Pro" And they both work perfectly on the Bootcamp Windows 7 install, and so its using the same hardware so it has to be the drivers right ?)
    Any help would be great, Thanks
    Darius

      Mac book pro (late 2013) has a lag when sculpting and rotating models in Zbrush, but only when using my Wacom-capture tablet (if I use a mouse or trackpad its fine no lag).
       Also Premiere Pro CS5 playback is almost like watching footage in slow motion, Premiere Pro is installed on the main drive but the footage is on an external drive connected with USB 2.
      I'm wondering if it is just a problem with the Mac USB drivers maybe not supporting USB 2 ? (Because I have also installed Window 7 on this same MacBookPro and tested the same software "Zbrush and Premiere Pro" And they both work perfectly on the Bootcamp Windows 7 install, and so its using the same hardware so it has to be the drivers right ?)
    Any help would be great, Thanks
    Darius

  • My up and down arrows as well as page up and page down no longer work properly only when using firefox. Page up and down function more like the "home" and "end" keys as do the arrow keys.

    Honestly I'm not sure if these began just after I updated FF to the current release, but it's been happening for at least 2 weeks. The arrow keys and page up and page down keys all work as if I'm pressing the 'home' and 'end' keys on my keyboard. This is only when using FF. Please contact me if you need more clarification. Thanks in advance!

    Sounds that you have switched on caret browsing.
    * http://kb.mozillazine.org/accessibility.browsewithcaret
    You can press press F7 (on Mac: fn + F7) to toggle caret browsing on/off.
    * Tools > Options > Advanced : General: Accessibility: [ ] "Always use the cursor keys to navigate within pages"
    * http://kb.mozillazine.org/Scrolling_with_arrow_keys_no_longer_works
    * http://kb.mozillazine.org/Accessibility_features_of_Firefox

  • Firefox freezes when opening a window with PDF files, etc., yet it works perfectly when using explorer as browser.

    I think Firefox mozilla is having issues with Adobe reader. It frequently crashes. I think this may be why my computer freezes when pulling up a PDF file or other text windows, yet, everything works perfect when using Explorer as my browser. It is so frustrating using Mozilla because it gets stuck when opening windows which require pulling up certain types of texts or applications, then I have to wait forever, or, reboot, and once in a while it gets so stuck that I have to take out battery and remove all power sources then start from scratch, and set my computer back to all settings previous to failure. Like I said, this only happens with Mozilla, all other browsers work perfectly well, but I love my Mozilla and it is my preferred browser. Please help. Thanks so much,
    susan

    Hi Susan,
    The Adobe plugin in Internet Explorer is a bit different from the one in Firefox, however they're all made by Adobe and they usually come with Adobe Reader.
    When you open a PDF file in Firefox, it "calls" Adobe Reader to help it read the file. In this case, the Adobe Reader takes over, and it is responsible for freezing your browser.
    I suggest you try the last 4 solutions presented on the [[Opening PDF files within Firefox]] (start with "Re-install the plugin" through "Re-install Adobe Reader").
    Good Luck :D

  • Does the NavigationController work only when placed in appDelegate?

    I am trying to build application that has a tab bar controller with two view and the first view contains a segmented control.
    Based on the decision of the segmented control, I load the tableview. The table view has an instance of navigation Controller in which I have assigned the tableview controller as a rootview controller. When I click on any row of the table view, a new controller gets pushed on the table view. In my case, the new view does not show up on the screen, once the row is clicked. I used NSlog and checked that the views pushed on the stack are correct.
    I read many threads here and saw that all of them use tabBarController and then it directly uses the navigationController and viewcontroller. Is this the only config that works ?
    What if I want to have a tabBarController->tableViewController->NavigationController, isn't it possible? Can anyone please help?

    WitchKing wrote:
    So, if I understand this fully, I can initialize the navigation controller as soon as the any row is clicked and put the tableView I am on as my rootView for the navController. and also push the next view controller I want to see, on its stack. and present the navigation controller's view.
    The usual way to implement a table view drill-down would be to make the first table view (or the content view which includes it) the root view of the nav controller. I.e. the table view's controller would be the root controller. When you do it that way all the objects will do what they were designed to do, and the code to push and pop subsequent views will almost write itself.
    However there's no reason you can't do what you described, which (if I understood) would be to attach the nav controller's view to the hierarchy only after a row in the table is selected. Note however, that you couldn't then expect the nav controller to make that first transition from the parent table view. You would have to provide your own transition to the nav controller's view.
    You bring up a good point in any case. I never explicitly answered the question in the Subject line of this thread.
    does the NavigationController work only when placed in appDelegate?
    No, there is no requirement to create a nav controller in any particular position of the view hierarchy. Unlike a tab controller, a nav controller need not be the root of the hierarchy (i.e. added directly to the key window). In fact you'll find several examples in the docs which show one or more nav controllers under some other controller.
    there might be some problem with adjusting bar heights and etc though.
    I'm not sure you proposed anything that would make it difficult to configure a table view. One nav controller issue that will impact table view position and size is the attempt to hide the nav bar which would otherwise appear above the table. I walked, unsuspecting, into this problem when I tried to help with another, currently ongoing thread that might interest you: [http://discussions.apple.com/message.jspa?messageID=9606805#9606805].
    While I'm pasting links, this one is also relevant to your post: [http://discussions.apple.com/message.jspa?messageID=9607946#9607946].
    Thank you for the very kind words about my posts. For some reason, this past few weeks I've been spending most of my forum helper time writing about table views and nav controllers. I sure hope I've been dispensing correct information. It's not like I have any knowlege of the internals. These puppies are black boxes to me, so I'm just going by the same docs you have and my own (growing!) collection of test beds.
    \- Ray

  • My Iphone 5s doesn't work. When i power on appear searching the sim card, but doesn't connect to the operator. Who can help me?

    Hy dear!
    My Iphone 5s doesn't work. When i power on appear searching the sim card, but doesn't connect to the operator. Who can help me? I reset the Iphone, but doesn't fix the probem.
    Thanks

    Hi dear!
    I'm very disappointed with Apple products! I was 15 days without my Iphone 5, because it stopped working and the had to be replaced by authorized apple. Then i bought an iphone 5s in two days it stopped working. Doesn't read the sim card. I call to Apple suport and discovery that the model A1533 is not warranted in Brazil and need to be replaced, because there is a hardware problem. In a moment i don't have anyone Phone. Why Apple does not send other equipment equal to authorized to exchange my Iphone, because in Brasil doesn't have the same model? I liked a lot this Apple phone, but i can't use, i have one brand new, but doen'st work. I don't have anybody in USA to exchange in one Apple store. Please help me!
    Thanks.

  • Why is Fault Policy working only when the BPEL's transaction is requiresNew

    Hi All
    I've defined Fault policy & fault bindings files for faults in my BPEL process. I'm using Oracle SOA Suite 11g.
    But the fault management framework is properly working only when the transaction property(bpel.config.transaction) of the BPEL is set to "requiresNew" in composite.xml
    When i modify it ot required, its not working, i.e. it is waiting for some period and erroring out. I could not manage these errors from the EM as we do for those in Fault Management Framework.
    Why is this behavior?
    I went thru this article, but could not understand it
    Transaction and Fault Propagation Semantics in BPEL Processes(http://docs.oracle.com/cd/E21764_01/integration.1111/e10224/soa_transactions.htm)
    Can someone pls explain this.
    Regards
    RaviKiran.

    Please refer http://docs.oracle.com/cd/E21764_01/integration.1111/e10224/soa_transactions.htm
    Thanks,
    S

Maybe you are looking for