Tablet turns off when touching off screen border with cover on

Hi, I have a 1050L with a kwmobile cover. When the cover is on, it is enough to touch the side of the cover (off screen, where you hold it with your hands) with the built-in camera and the unit shuts itsself off. I need to hit the power button to turn it back on. This is very annoying. Without the cover, the problem does not occur at all. I looked for sensor settings and such, but so far to no avail. Please anyone help so I can continue using the tablet. The problem is only on the side with the camera, the other edges I can touch and hold without problem. Thanks a lot. Gunther Schwarz

Reset the device:
Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
If that doesn't help, tap Settings > General > Reset > Reset All Settings

Similar Messages

  • When I turn off the phone, the screen flashes with sony logo. any solution?

    Hi,
    when I turn off the phone, the screen flashes with sony logo. any solution?

    repair your phone with
    Update Service (SUS)
    PC Companion (PCC)
    Bridge (for Mac)
    Alternatives on How to backup Xperias
    http://talk.sonymobile.com/thread/36355
    "I'd rather be hated for who I am, than loved for who I am not." Kurt Cobain (1967-1994)

  • Is it bad to turn your iPod touch off every night? If I don't, the screen will be blank/distorted.

    I just got my new iPod touch from Fry's electronic, and just last night, I put it on sleep thoughout the whole night. I wake up, press the home button, and it lights up a gradiant grey-white. It happened the other day when I was playing with Draw Something. I then tried turning it off, and it took forever. But now its working. So I was wording if it's bad/not the best to turn your iPod touch off everynight, and if you do it?

    I just let my iPod sleep overnight. I turn on airplane mode to minimnize battery drain.

  • Hi can anyone help with a mac that had magnet put on it. I turned it on and then off but a white screen appears with a file with a question mark on it?

    Hi can anyone help with a mac that had magnet put on it. I turned it on and then off but a white screen appears with a file with a question mark on it?

    File icon with ? mark on it means it can't read from the hard drive. The hard drive is now wiped or bad. If just wiped then you will need to reinstall your operating system, OS X. If bad you will need to replace the drive.
    Start with booting the computer from the OS X install DVD that came with your system. If the Mac came with Lion Pre-Installed then you use the Lion internet recovery system to reinstall (Hold down Command+r keys or Command+Option+r keys to boot the computer from over the internet to the Lion recovery HD system).
    Good Luck.

  • My iMac (2007) keeps shutting off when in Full Screen mode (DVD, iTunes Visualizer, etc.) This only happens when I have an external monitor hooked up HDMI.

    My iMac (2007) keeps shutting off when in Full Screen mode (DVD, iTunes Visualizer, etc.) This only happens when I have an external monitor hooked up HDMI. Help?

    Try using another connection such as VGA or DVI to see if the problem repeats itself.

  • I want to know what happened to my ipod cause for exemple, when I turn on sometimes all the screen appears with lines and everything look like lines and I have to turn off again..

    I want to know what happened to my ipod, cause after a while that it was off when I want to run in on it gets lines, like if that would be broken and I have to turn off again..

    What generation is your iPod? My sister's 2g/3g(I'm not sure which) was doing something similar, but it would put a different graphic on the screen every time. We took it in to the apple store and they didn't determine what it was. One thing they said to try was to restore it and gradually add content on to see if it's an app or something loaded on it. If that doesn't work then they said it's probably something in the software or firmware. They gave her the option of getting one exactly like the one she had or getting the new one like I have. She ended up getting the new one on sale at target.

  • Should i turn the zen touch off when recharging?? or should i leave it o

    thanks.

    You can either of the two.
    If you go to settings you can turn idle shutdown time OFF, and that way your player will always stay on when you are charging.
    Wheter or not you want it on is up to you...

  • My Wifi turns off when trying to sync Itunes with ATV

    I have just brought an ATV and have the up to date software on everything. When trying to sync my itunes library with ATV after 45 mins -90 mins i lose my wifi connection on everything (mac computer, apple tv, iphone) this has not happened before I got the Apple TV and I have always have a strong and perfect connection, even when I am syncing itunes & ATV it is perfect for the first 45 mins.
    I have tried resetting the ATV to its factory settings and switching all other devices off when syncing. this hasn't worked.
    I would appreciate some help on this and some instructions on how to solve this in dummy form.

    PFL 1978 wrote:
    can you give me step by step instructions on how to do this as I'm an amateur?
    without knowing the make/model of your router, then no.
    and even then, unless someone here has that specific router, then we can't give you a 100% step-by-step instructions for doing it.

  • HP Pavillion dv3: Volume Icon on keyboard doesn't turn on when touched

    Hi guys!
    I have an HP Pavillion dv3 notebook and it has touch sensitive volume and wifi controls at the top of the keyboard. when you touch it and it turns blue, then it's on, when you touch it and it turns red, then its off.
    recently though, the volume control on my keyboard has been red, and even when I click it it's still red. it doesn't turn on. I checked the volumes on the screen and they're all alright, the sound card is fin, only problem is the volume button on the top of my keyboard doesn't turn on.
    how do I fix this? I can't hear any sounds because of this.
    thanks. God bless

    Hi undignified,
    Welcome to the HP Consumer Support Community!  It looks like this message was accidentally posted twice.  I am going to lock this instance of the thread and redirect everyone to this thread, or the one posted first.
    Thanks!
    Clicking the "Kudos star" to the left is a great way to say thanks!
    When your problem has been solved, accept the solution by clicking the "Accept as Solution" button to help other members in the future!
    Rules of Participation

  • Screen light auto turn dark when I use program/web with background dark in windows 8.1

    Hi there,
    I used HP Pavilion dv6t-6000 CTO Quad for 3 years.
    CPU: Intel core i7-2630QM
    GPU: AMD Radeon 6490m
    It build in windows 7 and I manual install ( fresh install ) windows 8. It's fine. But when I upgrade to windows 8.1, it have an issue and I really hate it.
    When I use "Sublime Text" ( with background is black ), the screen light is become darker. And when I back to ( e.g: a website with background is white ), the screen turn back to lighter.
    I tried many ways, included 4 ways here but it's NOT WORK. 
    NOTE: When I used Option 1 ( upper )
    1. Open PC settings, and click/tap on PC and devices on the left side
    2. Click/tap on Power and sleep on the left side, and turn on or off Adjust my screen brightness automatically on the right side under Brightness.
    ==> It's NOT SHOW button "Adjust my screen brightness automatically". It mean: I have NO built in auto brightness sensor.
    I think this issue is about AMD driver or Intel Graphic driver.
    Is anybody have idea???

    Hi @kolz,
    Welcome to the HP Forums!
    It is a wonderful  place to find answers and solutions!
    For you to have the best experience in the HP forum I would like to direct your attention to the HP Forums Guide Learn How to Post and More
    i grasp that after updating your system from Windows 8 to 8.1 you are having an issue with the display going dim.
    You have tried some steps you located on the web but there was no change.
    Windows 8 an 8.1 are not supported Operating Systems for your notebook.  This does not mean they will not work only that HP has not tested it and therefore does not supply updated drivers.  You would need to check the manufacturer's site for any updated drivers.
    Downloading or Updating Software and Drivers for HP Computers
    When I checked the driver page for your notebook I did notice there is a  bios update, have you done that?
    HP Pavilion dv6t-6000 CTO Quad Edition Entertainment Drivers and Software
    As a bios update does have a potential to cause damage I suggest contacting HP support for assistance with that process.
    Updating the BIOS
    Please call our technical support at 800 474 6836. If you live outside the US/Canada Region, please click the link below to get a support number for your region.
    World Wide Phone Support
    Good Luck!
    Here is a link to Troubleshooting a dim display (Windows 8, Windows 7 and Windows Vista)
    Sparkles1
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

  • HT3964 My iMac turns on and a white screen appears with the mac apple and the wheel just sits and spins for a long period of time. Any ideas?

    My iMac turns on. A white screen appears, then a apple appears, then the wheel starts to turn but my computer never boots all the way on?

    Please carefully read Apple's Gray screen appears during startup advice letter for steps on how to troubleshoot the issue.

  • I need to turn the horizontal and vertical scroll bars off when in full screen mode is this possible

    I am using a touchscreen monitor and am running the website at 1280 x 1024, however there are scroll bars and I dont want them and I dont want to alter the HTML

    Try this code in the file [http://kb.mozillazine.org/userContent.css userContent.css]
    <pre><nowiki>html,body { overflow: hidden !important; }</nowiki></pre>
    * http://kb.mozillazine.org/Editing_configuration
    * ChromEdit Plus: http://webdesigns.ms11.net/chromeditp.html

  • Subtitle text position off when in full screen

    I'm adding captioning/subtitles to my video (FLVPlaybackCaptioning) using dfxp.xml files. Everything works great when the video plays at it's initial resolution (640 x 360). The positioning of the captions is perfect. But I've included a Full Screen button and when the video goes full screen, the captions appear but their position is off. They are higher on the screen and they actually move upward 1 or 2 lines after they initially appear. I cannot seem to control this and am not sure why it only happens in full screen mode. In the component inspector I have set autoLayout to true and to false and it does not effect the captions one way or another. I cannot seem to find any support for this. Any help greatly appreciated.

    I've worked around this by placing the captions in a Text area below the movie. It works fine. But when I go full screen the captions remain the same size since I have had to turn off AutoLayout to get them to display in the Text Area. Anyone know how I can resize the captions automatically when the user clicks Full Screen?

  • Turning the iPod Touch off.

    Whenever I turn off my iPod Touch 32gb and turn it back on, it starts off with recovery mode, and then it makes me restore the iPod on iTunes. This has happened quite a few times, and everytime I restore I lose all my songs and apps. Is this supposed to happen?

    IM having the same problem. What happened to me was i tried to update my ipod from 2.2.1 firmware on a 2gen ipod touch, to FW 3.0. in the middle of the update (the bar on the pod was about halfway complete) i recieved an error message, the pod went black, and HAS NOT turned on or ANYTHING since then. NO hard reset, no restore. NOTHING is working. Plugging into the comp and it says the USB has encountered an error, but no resolution. I Tried to plug it into the wall socket for about 5 hrs and still no action from the pod.
    It seems to be a FW issue of it not installing completely/properly. SOoooooOoo... where do i go from here???

  • Just got the new 5s iphone keeps cutting off when working on screen

    l just got it to day cuts off screen to much

    Hi there,
    You may find the troubleshooting steps in the article below helpful.
    iPhone: Hardware troubleshooting
    http://support.apple.com/kb/TS2802
    -Griff W.

Maybe you are looking for

  • Vendor capacity check when creating PO

    Hello Friends. We have a business process situation where we would like to check Vendor capacity at time of creating PO (NB) for raw materials to ensure that we do not place POs for more than Vendor capacity. Ideally it would be great if there is any

  • Page up and down buttons nor working in preview

    Changes to preview seem to prevent the recognition of the page-up and page0down buttons. How do I fix this or report it as a bug to apple?

  • APEX 4.0.2 Project Gantt Chart - Error Code: 2002 Message: Empty input

    Hi I have created a brand new page containing a Project Gantt Chart region. The Gantt chart is designed to track the progress of a job over time. The page has one chart series containing the following SQL. SELECT null LINK, stage NAME, rownum ID, nul

  • Status 56 in receiving system

    Hi SDNers, By BD87 transaction, I have to catch the status in receiving system. To perform this task, I do the following steps: 1) Go to BD87 trx. 2) Select an idoc with status 3. 3) Execute the Tracing IDOCS system-wide (Trace IDOC). I should obtain

  • Cs5 surface pro 3

    Just bought a Surface Pro 3 and installed my copy of CS5 on it.  The letters and numbers on the menus and toolbars are so small as to be unreadable.  I tried going to Options but no good.  I changed the display resolution but no better.  How can I ma