TableView LINEEDIT works differently when viewed through Portal

I have a simple table with a few columns of data that I display and allow the user to change a row using the selectionMode = "lineedit". The columns are all controlled using htmlb tableViewColumns.
When I test my application from the WebAs the table looks fine. If a user selects a row they can see the entire amount of text that appears in a column they want to change
However, when the BSP comes up in our SAP portal and the user selects a row only the first 20 (or so) characters can be seen and the user must use the arrows keys to get to the part of the text they wish to change. Is this a setting somewhere?

For the <htmlb:inputField> look at attributes maxlength, size and width.
width: Determines the text width for the input field. We recommend that you use the size attribute instead of width.
size: Determines the size of the input field.
maxLength: Maximum length of the user input.
I must admit that this documentation is not tell me enough. Will ask on Monday about this.
As for your remark "works differently when viewed through Portal": You keep in mind that once a BSP application is running with the portal, all stylesheets (*.CSS) files are loaded from the portal server, and not the webAS.
Now it could happen that you are running an EP and an older (or incompatible) patch level than your BSP stylesheets are at the moment. For EP6, starting from what I remember at SP11, there is planned a technique to install the latest stylesheets from service market place. You ask about this via OSS, queue EP-PIN-?-STY (something like this).

Similar Messages

How to Set the Visibility of a field in ESS Address view through portal

Hi experts,
I want to set the visibility of a field in ESS Address view through portal.How to edit a field through portal? Please help me with procedures to be followed..
Thanks&Regards,
Karthik.

Hi,
Login to portal with a user having content administration role.
Navigate to your iview which must be under content provide by SAP(if its a standard iview).
Open the iview and click on preview button.
Then press ctr on keyboard and rightmouseclick on the field for which you want to change.
A popup will open. Change the visibility in the popup and save the changes. This is a way of personalization and it'll be applicable for all the users.

My images in my welcome page are different when viewed on the internet!

My images in my welcome template are different when viewed on the internet! After a while they don't change anymore. Isn't this so basic....?

Please provide your url so someone can see what you are talking about.

IDVD 8 - Slideshows work fine when viewing in iDVD, howver once burned

iDVD 8 - Slideshows work fine when viewing in iDVD, howver once burned the slideshows pause and crackel. I have tired this on two differnet PowerBook G4's that I own and I get same results.
I've tried playing on my DVD player and my two PowerBooks.
Hope someone can help. I've burned about 15 disc and keep getting the same results.

Might be the media you're using...
I recommend a disk image burned to Verbatim DVD-R at 4X or slower using Toast or Disk Utility. You can set burn speed in iDVD '08 if not creating a disc image.
David Pogue also recommends Verbatim on page 356 of his book:
iMovie HD & iDVD 6: The Missing Manual
Quoting David: "Cheaper brands don't use the same amount of organic dyes and are more likely to suffer premature deaths."

I have a powerpoint presentation with music which works fine when played through my macbook onto tv, but want to save the presentation to dvd. Music doesn't play - presently saved as wav. Anything i can do - have tried through idvd.

I have a powerpoint presentation with music which works fine when played through my macbook onto tv, but want to save the presentation to dvd. Music doesn't play - presently saved as wav. Anything i can do - have tried through idvd.

Hi
Please describe How You go from PPT to iDVD. Via iMovie ?
If so - then convert Your .wma file to .aiff (same kHz) and use this in iMovie instead. (no .mp3 either)
Yours Bengt W

Error Crystal report When viewed through SAP B1

Dear Experts
SAP B1 8.8 PL 16,SQL 2008
I am facing error (Unable to retrive data from database)(Vendor code-156) while accessing Crystal report from client machine throgh SAP B1.I have imported Crystal report through manage layout.The crystal reported is in shared in SAP server B1 SHR folder.I am able to access data from crystal report when viewed otherwise.When accessed crsytal report through SAP b1 on SAP Server crystal report is working fine.
Thanks & Regrds
Saurabh Lamba

Hi Saurabh Lamba,
Go To Administration / System Initialisation / Authorisation / General Authorisation & Set Authorisation for user.
If you have to Set Authorisation for user allready then follow this steps.
1.Restore Database as Test Company.
2.Export Report From Live Company.
3.Import this Report in Test Company as different name.
4.Export Report from Test Company have you Imported as deifferent name.
5.Again Import this Report in Live company as different name
I don't know what's the logic behind it.
Thanks,
Srujal Patel

TIFF & JPEG renders of RAW files appear different when viewed in Bridge

I am working with the demo of Photoshop CS6, with ACR 7.1. CS6 System Info will appear at the bottom of this post. Summary: AMD Phenom II x6 1090T, 16GB RAM, Win7-64bit, nVidia GTX 460 video w/1GB RAM, approx. 2.5 TB free space on multiple internal physical drives, Canon 50D, CR2 files. I have a camera profile generated through Profile Editor, and the monitor is calibrated with i-1 Match.
I have been practicing with the new Basic Panel controls (Process 2012). When I felt that I was getting the hang of them I started saving JPEG and TIFF files and noticed differences between what appears in Bridge and ACR. I worked on this for some time and searched out some other discussions in the Forum which seemed to talk about similar results. I have now tried Image Processor via Bridge, Save Image in ACR, and Open>Save manually in PS CS6. By whatever route, the TIFFs and JPEGs are different (lighter in the following examples, but this is not always the case), while PSD saves seem to be close, but not identical to the CR2 when viewed in Bridge or Photoshop. Here is a screen capture of Bridge thumbnails which show the differences.
I hope the labels come through legibly. The two images on the second row are CR2 and PSD respectively. What is really odd to me is that when I resaved the PSD file as a TIFF, the same sort of difference shows up in the TIFF. (See _MG_7960_via_PSD.tif above.) I have uploaded the CR2, its XMP, a TIFF and a JPEG on Sendspace (107 MB). I did this earlier in my experiments and regret that the file naming is not as informative as might be.
http://www.sendspace.com/file/t0lhko
I have run a few other ACR adjusted CR2 images through Image Processor and seen a variety of differences between the rendered files and the RAW versions. The differences seem to be in Exposure and Contrast. Most of these looked somewhat darker, unlike the examples above.
I will happily provide any other information on request. Thanks!
Photoshop System Info:
Adobe Photoshop Version: 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00) x64
Operating System: Windows 7 64-bit
Version: 6.1 Service Pack 1
System architecture: AMD CPU Family:15, Model:10, Stepping:0 with MMX, SSE Integer, SSE FP, SSE2, SSE3
Physical processor count: 6
Processor speed: 3511 MHz
Built-in memory: 16382 MB
Free memory: 13415 MB
Memory available to Photoshop: 14766 MB
Memory used by Photoshop: 71 %
Image tile size: 132K
Image cache levels: 4
OpenGL Drawing: Enabled.
OpenGL Drawing Mode: Advanced
OpenGL Allow Normal Mode: True.
OpenGL Allow Advanced Mode: True.
OpenGL Allow Old GPUs: Not Detected.
Video Card Vendor: NVIDIA Corporation
Video Card Renderer: GeForce GTX 460/PCIe/SSE2
Display: 1
Display Bounds:= top: 0, left: 0, bottom: 1200, right: 1920
Video Card Number: 1
Video Card: NVIDIA GeForce GTX 460
OpenCL Unavailable
Driver Version: 8.17.13.142
Driver Date: 20120515000000.000000-000
Video Card Driver: nvd3dumx.dll,nvwgf2umx.dll,nvwgf2umx.dll,nvd3dum,nvwgf2um,nvwgf2um
Video Mode: 1920 x 1200 x 4294967296 colors
Video Card Caption: NVIDIA GeForce GTX 460
Video Card Memory: 1024 MB
Video Rect Texture Size: 16384
Serial number: Tryout Version
Application folder: C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)\
Temporary file path: C:\Users\Kieren\AppData\Local\Temp\
Photoshop scratch has async I/O enabled
Scratch volume(s):
E:\, 770.4G, 644.1G free
K:\, 931.5G, 482.3G free
L:\, 1.82T, 854.4G free
H:\, 1.75T, 505.2G free
Required Plug-ins folder: C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)\Required\
Primary Plug-ins folder: C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)\Plug-ins\
Additional Plug-ins folder: not set
Installed components:
   A3DLIBS.dll   A3DLIB Dynamic Link Library   9.2.0.112
   ACE.dll   ACE 2012/01/18-15:07:40   66.492997   66.492997
   adbeape.dll   Adobe APE 2012/01/25-10:04:55   66.1025012   66.1025012
   AdobeLinguistic.dll   Adobe Linguisitc Library   6.0.0
   AdobeOwl.dll   Adobe Owl 2012/02/09-16:00:02   4.0.93   66.496052
   AdobePDFL.dll   PDFL 2011/12/12-16:12:37   66.419471   66.419471
   AdobePIP.dll   Adobe Product Improvement Program   6.0.0.1654
   AdobeXMP.dll   Adobe XMP Core 2012/02/06-14:56:27   66.145661   66.145661
   AdobeXMPFiles.dll   Adobe XMP Files 2012/02/06-14:56:27   66.145661   66.145661
   AdobeXMPScript.dll   Adobe XMP Script 2012/02/06-14:56:27   66.145661   66.145661
   adobe_caps.dll   Adobe CAPS   6,0,29,0
   AGM.dll   AGM 2012/01/18-15:07:40   66.492997   66.492997
   ahclient.dll    AdobeHelp Dynamic Link Library   1,7,0,56
   aif_core.dll   AIF   3.0   62.490293
   aif_ocl.dll   AIF   3.0   62.490293
   aif_ogl.dll   AIF   3.0   62.490293
   amtlib.dll   AMTLib (64 Bit)   6.0.0.75 (BuildVersion: 6.0; BuildDate: Mon Jan 16 2012 18:00:00)   1.000000
   ARE.dll   ARE 2012/01/18-15:07:40   66.492997   66.492997
   AXE8SharedExpat.dll   AXE8SharedExpat 2011/12/16-15:10:49   66.26830   66.26830
   AXEDOMCore.dll   AXEDOMCore 2011/12/16-15:10:49   66.26830   66.26830
   Bib.dll   BIB 2012/01/18-15:07:40   66.492997   66.492997
   BIBUtils.dll   BIBUtils 2012/01/18-15:07:40   66.492997   66.492997
   boost_date_time.dll   DVA Product   6.0.0
   boost_signals.dll   DVA Product   6.0.0
   boost_system.dll   DVA Product   6.0.0
   boost_threads.dll   DVA Product   6.0.0
   cg.dll   NVIDIA Cg Runtime   3.0.00007
   cgGL.dll   NVIDIA Cg Runtime   3.0.00007
   CIT.dll   Adobe CIT   2.0.5.19287   2.0.5.19287
   CoolType.dll   CoolType 2012/01/18-15:07:40   66.492997   66.492997
   data_flow.dll   AIF   3.0   62.490293
   dvaaudiodevice.dll   DVA Product   6.0.0
   dvacore.dll   DVA Product   6.0.0
   dvamarshal.dll   DVA Product   6.0.0
   dvamediatypes.dll   DVA Product   6.0.0
   dvaplayer.dll   DVA Product   6.0.0
   dvatransport.dll   DVA Product   6.0.0
   dvaunittesting.dll   DVA Product   6.0.0
   dynamiclink.dll   DVA Product   6.0.0
   ExtendScript.dll   ExtendScript 2011/12/14-15:08:46   66.490082   66.490082
   FileInfo.dll   Adobe XMP FileInfo 2012/01/17-15:11:19   66.145433   66.145433
   filter_graph.dll   AIF   3.0   62.490293
   hydra_filters.dll   AIF   3.0   62.490293
   icucnv40.dll   International Components for Unicode 2011/11/15-16:30:22    Build gtlib_3.0.16615
   icudt40.dll   International Components for Unicode 2011/11/15-16:30:22    Build gtlib_3.0.16615
   image_compiler.dll   AIF   3.0   62.490293
   image_flow.dll   AIF   3.0   62.490293
   image_runtime.dll   AIF   3.0   62.490293
   JP2KLib.dll   JP2KLib 2011/12/12-16:12:37   66.236923   66.236923
   libifcoremd.dll   Intel(r) Visual Fortran Compiler   10.0 (Update A)
   libmmd.dll   Intel(r) C Compiler, Intel(r) C++ Compiler, Intel(r) Fortran Compiler   10.0
   LogSession.dll   LogSession   2.1.2.1640
   mediacoreif.dll   DVA Product   6.0.0
   MPS.dll   MPS 2012/02/03-10:33:13   66.495174   66.495174
   msvcm80.dll   Microsoft® Visual Studio® 2005   8.00.50727.6195
   msvcm90.dll   Microsoft® Visual Studio® 2008   9.00.30729.1
   msvcp100.dll   Microsoft® Visual Studio® 2010   10.00.40219.1
   msvcp80.dll   Microsoft® Visual Studio® 2005   8.00.50727.6195
   msvcp90.dll   Microsoft® Visual Studio® 2008   9.00.30729.1
   msvcr100.dll   Microsoft® Visual Studio® 2010   10.00.40219.1
   msvcr80.dll   Microsoft® Visual Studio® 2005   8.00.50727.6195
   msvcr90.dll   Microsoft® Visual Studio® 2008   9.00.30729.1
   pdfsettings.dll   Adobe PDFSettings   1.04
   Photoshop.dll   Adobe Photoshop CS6   CS6
   Plugin.dll   Adobe Photoshop CS6   CS6
   PlugPlug.dll   Adobe(R) CSXS PlugPlug Standard Dll (64 bit)   3.0.0.383
   PSArt.dll   Adobe Photoshop CS6   CS6
   PSViews.dll   Adobe Photoshop CS6   CS6
   SCCore.dll   ScCore 2011/12/14-15:08:46   66.490082   66.490082
   ScriptUIFlex.dll   ScriptUIFlex 2011/12/14-15:08:46   66.490082   66.490082
   tbb.dll   Intel(R) Threading Building Blocks for Windows   3, 0, 2010, 0406
   tbbmalloc.dll   Intel(R) Threading Building Blocks for Windows   3, 0, 2010, 0406
   TfFontMgr.dll   FontMgr   9.3.0.113
   TfKernel.dll   Kernel   9.3.0.113
   TFKGEOM.dll   Kernel Geom   9.3.0.113
   TFUGEOM.dll   Adobe, UGeom©   9.3.0.113
   updaternotifications.dll   Adobe Updater Notifications Library   6.0.0.24 (BuildVersion: 1.0; BuildDate: BUILDDATETIME)   6.0.0.24
   WRServices.dll   WRServices Friday January 27 2012 13:22:12   Build 0.17112   0.17112
   wu3d.dll   U3D Writer   9.3.0.113
Required plug-ins:
   3D Studio 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Accented Edges 13.0
   Adaptive Wide Angle 13.0
   ADM 3.11x01
   Angled Strokes 13.0
   Average 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Bas Relief 13.0
   BMP 13.0
   Camera Raw 7.1
   Chalk & Charcoal 13.0
   Charcoal 13.0
   Chrome 13.0
   Cineon 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Clouds 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Collada 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Color Halftone 13.0
   Colored Pencil 13.0
   CompuServe GIF 13.0
   Conté Crayon 13.0
   Craquelure 13.0
   Crop and Straighten Photos 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Crop and Straighten Photos Filter 13.0
   Crosshatch 13.0
   Crystallize 13.0
   Cutout 13.0
   Dark Strokes 13.0
   De-Interlace 13.0
   Dicom 13.0
   Difference Clouds 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Diffuse Glow 13.0
   Displace 13.0
   Dry Brush 13.0
   Eazel Acquire 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Embed Watermark 4.0
   Entropy 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Extrude 13.0
   FastCore Routines 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Fibers 13.0
   Film Grain 13.0
   Filter Gallery 13.0
   Flash 3D 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Fresco 13.0
   Glass 13.0
   Glowing Edges 13.0
   Google Earth 4 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Grain 13.0
   Graphic Pen 13.0
   Halftone Pattern 13.0
   HDRMergeUI 13.0
   IFF Format 13.0
   Ink Outlines 13.0
   JPEG 2000 13.0
   Kurtosis 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Lens Blur 13.0
   Lens Correction 13.0
   Lens Flare 13.0
   Liquify 13.0
   Matlab Operation 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Maximum 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Mean 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Measurement Core 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Median 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Mezzotint 13.0
   Minimum 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   MMXCore Routines 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Mosaic Tiles 13.0
   Multiprocessor Support 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Neon Glow 13.0
   Note Paper 13.0
   NTSC Colors 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Ocean Ripple 13.0
   Oil Paint 13.0
   OpenEXR 13.0
   Paint Daubs 13.0
   Palette Knife 13.0
   Patchwork 13.0
   Paths to Illustrator 13.0
   PCX 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Photocopy 13.0
   Photoshop 3D Engine 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Picture Package Filter 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Pinch 13.0
   Pixar 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Plaster 13.0
   Plastic Wrap 13.0
   PNG 13.0
   Pointillize 13.0
   Polar Coordinates 13.0
   Portable Bit Map 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Poster Edges 13.0
   Radial Blur 13.0
   Radiance 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Range 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Read Watermark 4.0
   Reticulation 13.0
   Ripple 13.0
   Rough Pastels 13.0
   Save for Web 13.0
   ScriptingSupport 13.0
   Shear 13.0
   Skewness 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Smart Blur 13.0
   Smudge Stick 13.0
   Solarize 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Spatter 13.0
   Spherize 13.0
   Sponge 13.0
   Sprayed Strokes 13.0
   Stained Glass 13.0
   Stamp 13.0
   Standard Deviation 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Sumi-e 13.0
   Summation 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Targa 13.0
   Texturizer 13.0
   Tiles 13.0
   Torn Edges 13.0
   Twirl 13.0
   U3D 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Underpainting 13.0
   Vanishing Point 13.0
   Variance 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Variations 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Water Paper 13.0
   Watercolor 13.0
   Wave 13.0
   Wavefront|OBJ 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   WIA Support 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Wind 13.0
   Wireless Bitmap 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   ZigZag 13.0
Optional and third party plug-ins: NONE
Plug-ins that failed to load: NONE
Flash:
   Mini Bridge
   Kuler
Installed TWAIN devices: NONE

Thanks very much for that lead, NormanPCN. I do have Auto Tone checked, though the rendered files in the example above do not have XMP sidecars. I will try unchecking Auto Tone even so, and post back when I see what happens.
Thanks again,
Kieren
EDIT: Bingo! I took Auto Tone off in ACR Preferences (in Bridge) and the non-RAW files immediately regenerated thumbs and previews. They now are indistinguishable from the PSD. There is still the very slight difference which I mentioned between the PSD and the CR2. While that seems odd, it is small enough to be relatively trivial.
Many thanks!
Thumbnail view w/o Auto:

Website renders slightly different when viewed in IE vs Firefox

Greetings,
The site is
http://www.ryanscafe.net
The issue: Side Gifs on each end of the web page render
differently in IE and Firefox. I built this site on a Mac with
Photoshop and Dreamweaver. I made the mistake of using tables. I
built a version that looked fine in Firefox, Safari, and Opera. But
had problems with the navigation buttons falling down a few
centimeters out of the header when viewed in IE. So since most
people browse in IE I adjusted the table sizes so the web pages
would work in IE. Only problem now is when you view the site in
Firefox, etc. the outer Gifs I used to frame the site won’t
fit without having the buttons repeat their movement and falling
out of place a few centimeters when viewed in IE. (If I make the
site render in the IE browser it has problems in Firefox with the
side Gifs. When the site renders well in Firefox the Navigation
buttons are out of place when viewed in IE.)
I tried shrinking the tables but still had the same problem
whatever size I made them. I tried a transparent Gif to push on the
cells and that didn’t work. I tried endlessly adjusting but
that hasn’t worked yet.
Any insight into resolving this issue is greatly appreciated.
Thanks,
Mike

Anyone?

Code works fine when stepping through debug, but not without debug

I have the following code that works fine when I step through with the debugger, but when I run it with out the debugger it never gets the objects in the "moveObjects" method. I would appreciate any help. Thank you
import com.crystaldecisions.sdk.exception.SDKException;
import com.crystaldecisions.sdk.framework.IEnterpriseSession;
import com.crystaldecisions.sdk.framework.IEnterpriseSession;
import com.crystaldecisions.sdk.plugin.desktop.program.IProgramBase;
import com.crystaldecisions.sdk.plugin.desktop.common.*;
import com.crystaldecisions.sdk.framework.*; //cesession
import com.crystaldecisions.sdk.plugin.desktop.program.*; //ceplugins
import com.crystaldecisions.sdk.occa.infostore.IInfoStore;
import com.crystaldecisions.sdk.occa.infostore.*;
import com.crystaldecisions.sdk.properties.IProperties;
import com.crystaldecisions.sdk.plugin.destination.managed.*;
import java.sql.SQLException;
import java.sql.Statement;
import java.sql.DriverManager;
import java.sql.Connection;
import java.util.*;
import java.sql.ResultSet;
import java.sql.Connection;
import java.sql.Statement;
import java.sql.ResultSet;
import java.sql.DriverManager;
* @author ag0310m
public class MoveRptInstance implements IProgramBase {
 public void run(IEnterpriseSession enterpriseSession, IInfoStore iStore, java.lang.String[] args) {
 try {
 IInfoObjects objects = null;
 IInfoObjects objs = null;
 IProperties props = null;
 try {
 getObjectsToSend(objects, iStore);
 moveObjects(iStore);
 } catch (SDKException e) {
 //ExamplesUtil.WriteError(request, response, e, "RETRIEVE_ERROR", errorpagerfile);
 System.out.println(e.toString());
 //out.clear();
 return;
 } catch (Exception ex) {
 ex.printStackTrace();
 private void getObjectsToSend(IInfoObjects objects, IInfoStore iStore) throws SDKException {
 objects = null;
 objects = iStore.query("Select * from CI_INFOOBJECTS where si_name = 'ReportBurstingTest' and si_instance = 1 and si_recurring = 0");
 try {
 sendObjects(objects, iStore);
 } catch (Exception e) {
 System.out.println(e.getLocalizedMessage().toString());
 e.printStackTrace();
 } finally {
 private void moveObjects(IInfoStore iStore) throws SDKException {
 IInfoObjects iObjects = null;
 iObjects = iStore.query("Select * from CI_INFOOBJECTS where si_parentid = 716");
 int x = iObjects.size();
 System.out.println("value of x = "+x);
 for (int ii = 0; ii < x; ii++) {
 IInfoObject obj = (IInfoObject) iObjects.get(ii);
 obj.setParentID(868003);
 iStore.commit(iObjects);
 private void sendObjects(IInfoObjects oInfoObjects, IInfoStore infoStore) throws SDKException {
 //Grab the first object in the collection, this will be sent.
 int x = oInfoObjects.size();
 System.out.println("3");
 for (int i = 0; i < x; i++) {
 IInfoObject infoObject = (IInfoObject)oInfoObjects.get(i);
 ISendable obj = (ISendable)infoObject;
 IDestinationPlugin destinationPlugin = getDestinationPlugin(infoStore, infoObject.getKind(), infoObject.getTitle(), infoObject.getUpdateTimeStamp());
 IDestination destination = obj.getSendToDestination();
 destination.setFromPlugin(destinationPlugin);
 //Send the InfoObjects.
 infoStore.sendTo(oInfoObjects);
 private IDestinationPlugin getDestinationPlugin(IInfoStore infoStore, String kind, String title, Date dte) throws SDKException {
 //Retrieve the Managed Destination plugin from the InfoStore
 //this should be cast as an IDestinationPlugin *DON'T FORGET THE get(0) AT THE END**
 IDestinationPlugin destinationPlugin = null;
 destinationPlugin = (IDestinationPlugin)infoStore.query("SELECT TOP 1 * " +
"FROM CI_SYSTEMOBJECTS " +
 "WHERE SI_NAME='CrystalEnterprise.Managed'").get(0);
 //Retrieve the Scheduling Options.
 //This interface is the one which allows us to add the file location for the scheduling.
 IManagedOptions managedOptions = (IManagedOptions) destinationPlugin.getScheduleOptions();
 managedOptions.setDestinationOption(IManagedOptions.CeDestinationOption.ceInbox);
 managedOptions.setIncludeInstance(true);
 managedOptions.setTargetObjectName(title+" - "+dte.toString());
 managedOptions.setSendOption(IManagedOptions.CeManagedSendOption.ceCopy);
 //Set of users that will receive the instance.
 Set userSet = managedOptions.getDestinations();
 //Query for the id of a particular user that will receive the instance.
 IInfoObjects users = null;
 users = infoStore.query("SELECT TOP 1 SI_ID " +
 "FROM CI_SYSTEMOBJECTS " +
 "WHERE SI_NAME='Administrator' AND SI_PROGID='CrystalEnterprise.User'");
 if (users.size() > 0) {
 IInfoObject user = (IInfoObject)users.get(0);
 int id = user.getID();
 userSet.add(new Integer(id));
 return destinationPlugin;

I'm assuming SI_ID=716 is the Inbox where you're sending the objects.
The issue is that you're not clicking the "Step Over" button fast enough when debugging. If you click really fast, then you'll get the same issue.
Workaround for the non-debug case is to count the number of objects you're sending, then when moving, loop till the InfoStore query retrieves the correct number of objects.
You're not giving enough time for the Destination Job Server to send the objects to the Inbox - they're not there yet.
Sincerely,
Ted Ueda
Edit: I see you've identified the issue as well - note that the CMS job scheduling thread triggering interval isn't under programmatic control, so I'd still recommend loop-count-wait workflow.
Edited by: Ted Ueda on Oct 22, 2009 11:59 AM

Photos in 9.2 do not appear when viewed through screen sharing

I recently upgraded my Mac Mini, which stores my master iPhoto library, to iPhoto 9.2. Because this Mac Mini is also used as a media server for an AppleTV, I almost always operate the computer through screen sharing using a MacBook Pro, rather than connecting it to a television. Both computers are running OS 10.6.8.
Since upgrading this setup to iPhoto 9.2, I can no longer view photos in my iPhoto library through screen sharing. Previously, I had noticed that I could not view certain other things through screen sharing (such as watching DVD's). For example, I couldn't view individual photos in detail in iPhoto, but I could view them in grid view. Now I cannot even view them in grid view anymore.
Is there a graphics library that is not compatible with screen sharing that is now being completely used by iPhoto? Is there a setting that I can check? Any help would be greatly appreciated.

Thanks, Michael.
I will give it a try.
Avox Systems Web Site: http://www.avoxsys.com
AVOX SYSTEMS
AIRCRAFT SYSTEMS
Rick Barusic
Senior Technical Writer
225 Erie Street - Lancaster, NY 14086 - USA
Tel: 716-686-1706
[email protected]
http://www.zodiacaerospace.com
The information transmitted is intended only for the person or entity to
which it is addressed and may contain confidential and/or privileged
material. Any review, retransmission, dissemination, or other use of or
taking any action in reliance upon this information by persons or entities
other than the intended recipient is prohibited. If you received this in
error, please contact the sender and delete the material from any
computer.
From: MichaelKazlow <[email protected]>
To: rick barusic <[email protected]>
Date: 11/24/2010 10:32 PM
Subject: Some CGM graphics do not appear when
FrameMakerfiles are converted to PDF
First you should update to the latest version of Acrobat 8, since you say
you are running Acrobat 8, you should update to 8.2.5. Update your
FrameMaker to 7.2p158. Those two steps might do the trick. If that fails
try using a different settings file. Perhaps High Quality or Press
Quality. I would never use Standard for anything where fidelity is
important.

Bullet and number styles different when viewed

I'm using RoboHelp 6 to produce a WebHelp project.
It seems like the bullet and number styles behave differently
than the other styles. There is an automatic indent, even though
Left is set to 0, and a tab. I have been able to get the View
Selected Item to look the way I want (with a hanging indent that
aligns under the tabbed text) even though it looks very different
in the WYSIWYG Editor.
With the Number style, the font size seems much larger in the
View Selected Item than it does in the WYSIWYG Editor. Is there a
way to know what the font size will be/look like to the Help user?
The number size also seems to be different if I use the Create a
Number List button or use the Number style. What is the difference
between using the style and using the button? Can I control the
number and bullet font and size?
I'm still learning.
Thanks

Bummer!
RH doesn't always remove every piece of code when you, for
instance, select bolded characters and click the Bold toolbar
button; it often adds another SPAN tag for normal inside or outside
the bold tag!
The surest way I know to completely purge content is to
filter it through a plain text editor like Notepad:
1. In the RH topic, select the content (some paragraphs or
the entire topic).
2. Cut it (Ctrl+X).
3. Paste it into Notepad (Ctrl+V).
4. In Notepad, select and cut the content.
5. In the RH topic, paste the purged content where the old
content used to be.
Each paragraph will only get P tags assigned to it, allowing
you then to style your way through them. Of course, this
slash-and-burn method eliminates all hyperlinks, pop-ups, etc., so
plan accordingly.
Good luck,
Leon

Images Appear Different When Viewed in Photoshop CS4 vs. LR 2.7

Hello, I hope someone on this forum can help.
I have a series of high quality images that are catalogued using Lightroom 2.7. Many were edited using Photoshop while others were edited in the "Develop" module of Lightroom. All of the images look exceptional in both Lightroom and Brdige. However, when I open some of the images in PS, either directly from Bridge or by using the "Edit in" command from Lightroom, they appear washed out and dull -- very different and much worse. I always use the setting, "Edit a Copy with Lightroom Adjustments." The problem pertains to all images regardless of file format (JPEG, DNG, NEF, etc.) and regardless of whether they are opened from LR, Bridge or directly from the image using the "Open with" command in Windows.
This happens on two completely different set of monitors. At work I have a Dell 2208 WFPt UltraSharp monitor, and at home a dual monitor setup with an Asus VE278Q and an LG flat screen (all are flat screen, high quality monitors). I have a Lenovo X201s with 8gb of RAM and a high-speed i7 processor running Windows 7, 64-bit. All of my Adobe products are up-to-date. Windows Color Management shows all displays as "Generic PnP Monitor - Intel HD Graphics," and the Advanced mode of Intel's HD Graphics correctly identifies each monitor being used. The problem is identical regardless of which monitor is being used and it does not seem to make any difference as to which color profile is associated with the monitor (I have two profiles added -- Adobe RGB (1998) (the default) and sRGB IEC61966-2.1).
Specifically, if I double-click on a particular TIF image in Bridge (where the preview looks great), it then triggers Camera Raw 5.7 - TIF, where again the image looks terrific. The settings applied by Camera Raw are "ProPhotoRGB; 16 bit; 3607 by 2420 (8.7MP); 300 ppi" (although changing these settings makes no difference whatever when the image is subsequently opened in Photoshop). When the image is opened in Photoshop it looks terrible -- dull and washed out. I encounter the exact same problem when using my dual monitor setup at home, so I don't think monitor calibrations are the cause.
Strangely, I don't think this problem existed a couple of months ago. I've been busy on a project and haven't used Photoshop since the end of this past July (of 2011). As I recall, this problem did not exist then, so I'm wondering if a setting in Photoshop inadvertently got altered since then.
I have the following key settings in Photoshop's "Color Settings":
Working Spaces: RGB -- ProPhoto RGB
Color Management Policies -- Preserve Embedded Profiles
Conversion Options -- Adobe (ACE)
I have the following key settings in Lightroom's "Preferences / External Editing":
Edit in Adobe Photoshop CS4
File Format -- PSD; Color Space ProPhoto RGB, 16-bits, 300 dpi
File Format -- TIFF; Color Space ProPhoto RGB, 16-bits, 300 dpi
I have tried and tried to figure this out, to no avail. Any help would be greatly appreciated!
Bob Woods
St. Paul, Minnesota

Thanks, I think you're right.
Any suggestions for a cheap and easy way to calibrate my monitors?

Date Axis Line/bar Chart not working properly when rendering through SDK

Hi all,
When i render a existing Crystal report 2011 through java SDK code(Eclipse) bar chart is working fine, But the Date Axis line chart is not displaying properly. the properties are getting changed.. Any clue how to handle this? Do we have particular jar for Chart?
Thanks in Advance!
Regards,
Mirthu

Hi Mirthu
I moved your post to the SAP Crystal Reports, version for Eclipse SCN Space. Unfortunately, all I know about Java is that it's in the cup in front of me . But I will get someone to have a look that should be able to help you ASAP.
- Ludek
Senior Support Engineer AGS Product Support, Global Support Center Canada

Tableview selection looks different when using iterator

One more litte question about the htmlb:tableView (Design2003, content-style = "tradeshow", selectMode = "MULTISELECT").
When you select a table line, the line is displayed with an orange background. However, if you use a tableView Iterator where you use a textView as the replacement_bee to display some text, this text is not displayed with an orange background, but with only an orange border and a white bacground.
Is there anything I can do?

I'm currently working on SP-Upgrade-Checks (47 to 54) for our web applications, and this is one of the things I've noticed.
Got hold up because of some more urgent duties, but as far as I remember I dealt with part of it already successfully. There are still some open questions I have though, and I hope to get back to this thread as soon as I can make some clear statements about it.
cheers,
Max

Image viewed in Photoshop CC looks different when viewed in Elements 11 Organizer, why?

I'm viewing a Nikon raw file (.nef) in Bridge CC, Camera Raw, and then in Photoshop CC. In Camera Raw I've made some adjustments before viewing it in Photoshop. For cataloging I prefer to use Photoshop Elements 11 Organizer (there are several reasons why that I won't go into here). When I get the image looking the way I want it to look in Photoshop and subsequently view the image in Elements Organizer the image in Organizer is not a good match to what is displayed in Photoshop. I particularly notice that nice blue sky tones appearing in Photoshop are shifted toward cyan in Elements Organizer. What is causing the mismatch in image color between the two Adobe products?
I've also noticed that the new Radial Filter that's available in the latest Camera Raw is not processed by Elements Organizer 11. Would this be processed in Elements 12?

I'm viewing a Nikon raw file (.nef) in Bridge CC, Camera Raw, and then in Photoshop CC. In Camera Raw I've made some adjustments before viewing it in Photoshop. For cataloging I prefer to use Photoshop Elements 11 Organizer (there are several reasons why that I won't go into here). When I get the image looking the way I want it to look in Photoshop and subsequently view the image in Elements Organizer the image in Organizer is not a good match to what is displayed in Photoshop. I particularly notice that nice blue sky tones appearing in Photoshop are shifted toward cyan in Elements Organizer. What is causing the mismatch in image color between the two Adobe products?
I've also noticed that the new Radial Filter that's available in the latest Camera Raw is not processed by Elements Organizer 11. Would this be processed in Elements 12?

TableView LINEEDIT works differently when viewed through Portal

Similar Messages

Maybe you are looking for