TableView without header. Why ?

Updated to java8 and now the tableview is hiding the header.
Run the example in Oracle Tutorial (TableViewSample) and didn´t work too.
Could anybody give me a help ?

It's early access software it doesn't always work.
I found that if you use the latest Java 8b94, the table headers show, but they didn't for the prior couple of builds.

Similar Messages

TableView without header

Hi,
My requirement is a tableview without a tableview header.
Can anybody help me in this case.
Regards,
Vaibhav

use something like below:
<hbj:tableView
           id="myTableView1"
           model="myTableViewBean.model"
           design="ALTERNATING"
           headerVisible="FALSE"
           footerVisible="true"
           fillUpEmptyRows="true"
           navigationMode="BYLINE"
           selectionMode="MULTISELECT"
           headerText="TableView example 1"
           onNavigate="myOnNavigate"
           visibleFirstRow="1"
           visibleRowCount="5"
           rowCount="16"
           width="500 px"
/>
note the headerVisible has been set as FALSE here.
Regards,
Shubhadip

There are only App Store/Books/Podcasts and ITune U on my Itunes store heading without MUSIC, why?

There are only App Store/Books/Podcasts and ITune on my Itune store heading, why? This means I cannot order music as a Hong Kong subscriber?

That's correct. It seems that music is not yet available in the Hong Kong store.
iTunes Store: Which types of items can I buy in my country?, http://support.apple.com/kb/TS3599

Report without HEADER LINE

how to create a report with out the HEADER LINE concept....because I want the output as only some of the fields from the table.....
And this type of programming consumes much processing than the normal one.....
NOTE: In normal process I am facing memory problem. It's giving error like "the WORKAREA <internal table> is not enough"
Regards
Suresh

Check the below example ,it has both header line and withou header line:
Internal table with header line
here i am using get time field command ,so use both program and see comparision time
report zxyz.
Internal table with header line.
DATA:BEGIN OF itab OCCURS 0,
lifnr LIKE lfa1-lifnr,
name1 LIKE lfa1-name1,
END OF itab.
data : f1 type i,
       f2 type i,
       f3 type i.
start-of-selection.
get run time field f1.
SELECT lifnr name1 FROM lfa1 INTO TABLE itab up to 200 rows.
loop at itab.
endloop.
get run time field f2.
f3 = f2 - f1 .
write :/ 'Time taken by query in Micro seconds', f3.
Internal table without header line
report zxyz1.
Internal table without header line.
types : begin of ty_itab ,
        lifnr LIKE lfa1-lifnr,
        name1 LIKE lfa1-name1,
        end of ty_itab.
data itab type standard table of ty_itab.
data wa_itab like line of itab.
data : f1 type i,
       f2 type i,
       f3 type i.
start-of-selection.
get run time field f1.
SELECT lifnr name1 FROM lfa1 INTO TABLE itab up to 200 rows.
loop at itab into wa_itab.
endloop.
get run time field f2.
f3 = f2 - f1 .
write :/ 'Time taken by query in Micro seconds', f3.
I would suggest use always internal table without header line.
Thanks
Seshu

How to read a file which has header and without header

Hi,
I have a file to file scenario wherein there are txt files in the source system, some of which has header and some without header.
How does the sender adapter dynamically identify a file with header and without header.
I knew that File content Conversion in the sender adapter with "Recordsets per message = 1" can read the header. But how to handle dynamically.
Thanks in advance for suggestions and advice.
Regards.
Praveen

Hi,
Let me give a more clear picture:-
One of my file which has header and the corresponding values is listed hereunder:
PERNR;KID;PNALT;NACHN;NAME2;VORNA;TITEL;TITL2 and so on.....
;1200;1200;Angus;; and so on.........
Other file which has no header but only values in it:-
1200;1200;;Werner;Angus and so on.......
The structure remains same for all the files. The only difference is that some of the file has header in it and some without header. The Message Type is mentioned hereunder:-
DT_LegacyEmployee (Category - Complex Type)
     Employees (Category - Element, Occurence - 1)
          Employee (Categroy - Element, Type - DT_LegacyEmployee_Row, Occurence - 0...unbounded)
               PERNR
               KID
               PNALT
               NACHN
               NAME2 and so on......
I read the file in record row. The file conversion parameters in the file sender adapter are mentioned hereunder:-
Document Name - MT_LegacyEmployee
Document Namespace - http://abc.com/xi
Recordset Name - Employees
Rescordset Structure - Employee,*
Recordsets per Message - 1
Key Field Type - String (Case Sensitive)
Employee.fieldSeparator - ;
Employee.endSeparator - 'nl'
Employee.fieldNames - PERNR,KID,PNALT,NACHN,NAME2,VORNA,TITEL,TITL2 and so on........
How do we dynamically identify whether the file has header or not. Even if the file has header or without header, the file needs to be picked and transferred to the target system. Kindly clarify.
Regards.
Praveen

How to create a TableView without Caption

Hi forum,
how can I create a TableView without Caption?
Thanks in advanced
Edited by: 899956 on 13-dic-2011 5.01

Not quite sure what "without a caption" means.
Maybe you don't want the headers displayed in the table, if so, then see =>
Hide / Remove TableView headers and
custom table header

Inspection Lot for Process Order without Header Material

Guys,
We have an scenario that we create a Process Order without Header material using T code CORO. Is it possible to assign or create a Inspection lot for Process order?
Regards,
Senthilraja

Hi
Please refer
QPL10004 User subscreen for displaying additional data in insp. lot
Regards
Sujit

Export data to excel without header in OBIEE

Dear experts,
I have some reports in OBIEE and I want to export them to excel or text(.csv),
I want to export without header .
How can I do that?
Regards,
David

Did you try the following steps?
1. Edit the report layout
2. Go to the columns and measures section
3. Click on the column / Measure properties
4. uncheck the 'Display Heading'
5. Save the report
6. Export to excel/csv
Please mark if helpful/correct.

Creative Cloud Installer gets half way through downloading the desktop app then just disappears, without downloading, why is that?

Creative Cloud Installer gets half way through downloading the desktop app then just disappears, without downloading, why is that?
I have recently purchased a student subscription to the 'complete package', my credit card was charged. Then I download the Creative Cloud Installer from the website, that's fine, then I double click the Creative Cloud Installer as per instructions, it starts downloading the desktop app, but only gets to about halfway then just disappears.
I've tried using both safari and chrome, restarting my computer, but neither has worked.
I have noticed that the website will not keep me logged in for long either, it keeps switching to BUY instead of DOWNLOAD.
Any ideas?

Please read, and reply back here with information https://forums.adobe.com/thread/1499014
-try some steps such as changing browsers and turning off your firewall
-also flush your browser cache so you are starting with a fresh browser
http://myleniumerrors.com/installation-and-licensing-problems/creative-cloud-error-codes-w ip/
http://helpx.adobe.com/creative-cloud/kb/failed-install-creative-cloud-desktop.html
or
A chat session where an agent may remotely look inside your computer may help
Creative Cloud chat support (all Creative Cloud customer service issues)
http://helpx.adobe.com/x-productkb/global/service-ccm.html

Production orders without header material transfer to APO

Hi,
for our process it's necessary to transfer dependent demands from rework production orders (without header material) to APO because the ATP check for the component take place in APO. In standard there is no way tor transfer such orders to APO. Only one possible solution is to add during order transfer a dummy material in order to trigger the transfer to APO. Is there anybody that have already used this???
Best regards
alex

Hi JJ,
1. Reference Operation Set - t-code CA11. In the initial screen, enter description, plant - xxxx, usage - 1 & status - 4, unit of measure - same as the material for which the routing is to be used (eg - EA or KG etc).
Click on operations tab, enter control key, work center, operation description.
2. Settlement - When you enter the basic details in co07 like description, basic qty, dates, the system will take you to the settlement screen where you need to enter the settlement receiver. Here you specity CTR for cost center or G/L for G/L account, you then have to specify the corresponding cost element number & also the % of settlement, which is normally 100%. You can also access this by clicking on header - settlement
Hope the above answers your query. If additional info is required, revert back.
If helpful award points
Regards,
Vivek

Moving data into internal table without header line

Hello experts.
i have two internal tables . itab1 without headerline and itab2 with headerline. itab1 has 10 fields and itab2 has 2 fields.
BEGIN OF itab,
        lifnr LIKE lfa1-lifnr,
        ktokk LIKE lfa1-ktokk,
        name1 LIKE lfa1-name1,
        sortl LIKE lfa1-sortl,
        pstlz LIKE lfa1-pstlz,
        ort01 LIKE lfa1-ort01,
        land1 LIKE lfa1-land1,
       j_1ipanno LIKE j_1imovend,
end of itab.
DATA: itab1 TYPE STANDARD TABLE OF itab.
data: begin of itab2 occurs 0,
      lifnr like j_1imovend-lifnr,
      j_1ipanno like j_1imovend-j_1ipanno,
end of itab2.
now i want to move the data from itab2-j_1ipanno into itab1-j_1ipanno. so pls tell me how to do that. lifnr in both the tables are the same.
thanks for all the replies.

Hi Shiva,
In with out header line,
You declare header line & body separately like
data: IT_MARA type standard table of MARA,
WA_MARA like line of IT_MARA.
Advantages:
1. Clear differentiation of header line over body
2. It is must in the ABAP Objects to have separate header line & body
3. Use ful in Nested Internal tables
Disadvantages:
1. Long syntax
for example: Loop at IT_MARA into WA_MARA.
In with header line
Data ITAB like MARA occurs 0 with header line.
Advantages:
1. Simple to use & declare over without header line.
Also,
With Header line:
codedata : itab like <dbtable> occurs 0 with header line.
Data: begin of itab occurs 0,
f1 type f1,
f2 type f2,
end of itab.[/code]
Without Header line.
codeTypes: begin of ty_tab,
f1 type f1,
f2 type f2,
end of ty_tab.
Data: itab type table of ty_tab, " Internal Table
wa type ty_tab. " Work Area[/code]
at any point of time use internal table without header line,it will be good performance as well OO ABAP will allow only internal table without header line.
Just use one simple example :
create one simple program with header line,use get run time field.
create one simple program without header line,use get run time field.
see the results ,here time will be micro seconds,so take 1000 records to internal table and do calculate the time.
While adding or retrieving records to / from internal table we have to keep the record temporarily.
The area where this record is kept is called as work area for the internal table. The area must have the same structure as that of internal table. An internal table consists of a body and an optional header line.
Header line is a implicit work area for the internal table. It depends on how the internal table is declared that the itab will have the header line or not.
e.g.
data: begin of itab occurs 10,
ab type c,
cd type i,
end of itab. " this table will have the header line.
data: wa_itab like itab. " explicit work area for itab
data: itab1 like itab occurs 10. " table is without header line.
The header line is a field string with the same structure as a row of the body, but it can only hold a single row.
It is a buffer used to hold each record before it is added or each record as it is retrieved from the internal table. It is the default work area for the internal table.
kindly reward if found helpful.
cheers,
Hema.

Read itab without header

Hi,
I'm moving in an internal table (without header) using a loop and I need to read the lines.
With the read line (saving data in a wa) sentence it can be done but it returns me an error because the itab hasn't header.
Can anybody tell me the correct syntax to achieve this?
Thanks in advance.
Regards.

Hi David,
If you delcare Internal table with headerline, system automatically assign headerline,
but
if you delcare Internal table without header line, you should delcare workarea or field symbols.
Syntex.
Data: itab type table of mara,
wa like line of itab.
read table itab into wa with key fieldname = fieldname.
with Header line.
data: itab type table of mara with headerline initial size 0.
read table itab with key matnr = matnr.
Regards,
Venkat.

SetCellFactory for TableView's header row.

I was trying to implement a CheckAll Button for the TableView. Previously, I was able to create a column of checkboxes by using setCellFactory but now I needed to do the same with the header but I can't seem to find anything about the TableView's header. I remembered that I was able get the header object from the table itself back when I was using Swing. Does JavaFX 2.0 have any API function to do with the header?

There is no API in TableColumn yet to support accessing the header rendering, but it is intended for a future release.
Of course, with a little bit of hackery via the lookup method, you can probably find what you want and manually modify it - but this isn't for the faint of heart.
-- Jonathan

Why no fade in from black when clip without head handle is adjacent to ...?

There seems to be a lot of workarounds and unintuitive ways of doing things in FCP. I'm trying to understand if it's something I don't know or if the developers of FCP are lazy to make things just work.
I'd like to know the reasoning for not allowing me to drop a Fade In Fade Out Dissolve on the beginning of a clip when the clip does not have a head handle and when the clip is after another clip that does not have a tail handle.
Why does the workaround (of inserting a gap, dropping the transition, and deleting the gap) work, but not the way it should just work?

Are you coming from iMovie? Because iMovie will adjust the clips so that you have handles. It does this because it is consumer software and strict show timing isn't an issue. But if FCP did this, the timing of the cut would change and professionally, that is a BIG no no.
You have to learn about handles and know how to use them and plan for dissolves.
#1 Transitions "Insufficient Content"
Shane's Stock Answer #1: Trying to add a Transition and get the error "Insufficient Content"
A full 1 second cross fade reaches 15 frames into each clip. So, if you want to change a cut to a cross fade, there has to be at least 15 additional frames of each clip. Say you're trying to cross fade from one clip into the very first frame of a second clip. FCP cannot 'create' 15 more frames of the second clip to do a cross fade. If they're not there, you're out of luck.
What you are running into is that you are marking an out point at the far edges of a clip then adding a cross dissolve, say 30 frames (one second) in duration. Since the dissolve is centered on the cut, it will start 15 frames before the cut, and try to go 15 frames AFTER the cut...which it can't do. What you need to do is plan how long your dissolve will be and back-time your cut so that it works.
You need to make sure that your clips have enough media (called 'handles') at the beginning of the incoming clip and at the end of the outgoing clip for the transition. For example, if you have a 1 second (30 frame) dissolve, your in and out point need to be at least 15 frames from the edge of the clip.
Shane

How to schedule a webi report in csv format without header?

I have a requirement to create scheduled csv reports without table headers? I am unable to do this from CMC. It gives the column headers by default in the exported csv file. However, in the webI rich client, I have an option to save the document as "CSV-Archive" which allows me to omit the column header.
How are these two options different and is there a way to get the "CSV-Archive" option from CMS?
Looking for your valuable suggestions.
Thanks
Sukanto

Is there a way to get the "CSV-Archive" option from CMS?
Customization of existing options or features in CMC is not available, it will become an enhancement request, you have to place this request in SAP Idea place.
WebIntelligence Rich client is a desktop tool, auto schedule of reports as .csv is not possible, save as CSV and save as to "CSV Archive" from Rich Client is a manual job.
BI launch pad, CMC are BOE Server components have the ability to auto schedule as .csv, as a default behavior column headers will be exported to CSV along with report data.
As a workaround, have a copy of original wibi reports in your webi reports you have to hide table headers and schedule them to save as .csv
To hide table headers:
Edit the report -> Select table block properties -> Chose 'Format Table' -> Under 'General' properties 'Display' options un-check "Show table headers"

TableView without header. Why ?

Similar Messages

Maybe you are looking for