Tabs float away from panel in Dreamweaver

In DW-CS3, when I insert a tabbed panel, not always, but
frequently, the Tab1 & Tab2 tabs will be floating randomly to
the upper left of the TabbedPanels panel. Should be in place above
the Content window. Does anyone have a remedy for this?

See screenshot:
Nancy O.

Similar Messages

Mailto links open google (desired) but load in current tab, moving away from website, and cannot hit "back" button to return.

I have firefox set to open "mailto" links, which is desired. However, when clicking the link, the gmail compose window opens in the current tab/window, and therefore leaves the website. Most of the time, the "back" button is not active, so I cannot get back to the website. The back button issue does not happen 100% for some reason.
To further explain, this is a website I am creating, so I am not sure if the fault lies with my code or in the google mailto option in firefox. (Code shown below)
>>>>>
<a class="email" href="mailto:[email protected]">email: [email protected]</a>
>>>>>
I tried using a target in the mailto link, but they seem not to work with mailto links like they do for links to other webpages. (Code shown below)
>>>>>
<a class="email" href="mailto:[email protected]" target="_blank">email: [email protected]</a>
---or---
<a class="email" href="mailto:[email protected]" target="_new">email: [email protected]</a>
>>>>>
Any pointers will help. Is my code bad? Or if the problem is with firefox's way of handling mailto links, is there a way to code to get around this?

I don't wanna claim total credit for it. I remember seeing someone mentioned a Back button problem with McAfee Add-on in the forum. I dismissed it initially because it seems far-fetched...

Text variable + text with tabs to align away from spine

Hello
I need a document header that shows the chapter captions. So I created a text variable that picks the format of the caption.
But the chapter captions have tabs:
I.>Introduction
So in the header, on the left pages it looks fine:
alignment is "away from spine"
I.>Introduction
But on the right page the chapter number remains with the spine, only the text after the tabs aligns "away from the spine":
I. > Introduction
I found it difficult to search for this on google and the forum (and no result) - and hope I made it clear in the text above I can't believe it's a rare problem and really hope I just oversee something and it can be solved..
Thank you!!

Some details about how the paragraph is constructed would help. I'm guessing here that the variable is a running head variable based on paragraph style, and that the nmber is manually typed, along with the tab, rather than being a numbered list.
If that's the case, substituting one or more em spaces or other fixed-width spaces in combination for the tab should solve the problem in the headers, but may cause other issues in the body of the text if your intention by using the tab was to always have a variable space between the number and the words depening on how many characters there are in your number. With roman numerals and proportional fonts it would be difficult without the tab to always have the chapter title itself begin at the same x-coordinate in the frame regardless of the number.
To overcome that issue, you can use two variables in the header, both designated as Running Header (character style), and separate them with an em-space or similar (not a tab). If there are not already nested styles in use for the titles, create two character styles that are nothing but names, then in the paragraph style for your chapter titles go to Drop Caps and Nested Styles and apply the first character syle up to 1 tab character, None through 1 tab character, and the second character style through 1 sentence. You two character style based variables in the header will pick up the two parts of the paragraph. It seems unlikely that anyone would notice or care that the spacing is fixed between number and text in the headers but not on the page, especially since the alignment shifts from page to page.

DW CS6 - Spry collapsible panels - How to have panel close when you click away from it?

I know typically onmouseout is used to close other items, but I could not figure it out with the spry collapsible panel. I have the panel opening onclick and closing onclick, but I would really like for it to close when you click anything else on the page outside of the panel.
Thank you!

Sorry, I did not mean other collapsing panels close when you click away from it. I simply meant in general for the closing after clicking away function, you can use onmouseout. I was working on something with collapsing panels and I wanted it to show the information when you clicked on it, but when you click on another panel, they both remain open. I really want both to close. I believe accordion does this, but not quite what I am looking for either.
Here is a better example of what I would prefer: Houston Public Library
If you visit their page and click "Find it" a box pops down with information and then when you click anywhere else on the screen, it closes that box. When you click "Research," it closes the "Find It" box and opens the "Research" box. There is likely a much better way to do this, but I am pretty new to this.
Any assistance is very much appreciated.
Thank you!

A problem with copy/paste from extract panel in Dreamweaver 2014.1.1

I have a problem with copy/paste from extract panel in Dreamweaver 2014.1.1 :
Russian letters pasting in dreamweaver html in such way: ffd0 ff9e ffd0 ff9a ffd0 ff9e ffd0 ff9c ffd0 ff9f ffd0 ff90 ffd0 ff9d ffd0 ff98 ffd0 ff98
Can you help? What could it be?

Hi,
I test the issue with my colleague and didn't find the same issue.
Here is the screenshot:
So please check if Lync Server 2013 and all the issued Lync 2013 client update to the latest version firstly, it not update to the latest version, update it and then test again.
Best Regards,
Eason Huang
Eason Huang
TechNet Community Support

Firefox crashes every time I try to navigate away from a page to a different site.

It seems to only happen when I have more than one tab open, but every time I try to navigate away from the originally opened page, it crashes. This has just started happening today (3/19/14) and I have tried to resetting Firefox but it did not remedy the problem.

hello, could you provide your latest few submitted crash reports? please enter '''about:crashes''' into the location bar, copy the latest few report ids from there & paste them here into a forum reply. this will give us a better understanding what may be triggering those crashes.

TS1292 I have recently received an iTunes card and after scraping away the panel to get my code the first part of the code is unreadable how do I go about getting a code for the card

Hi there I have recently been given an iTunes card as a present.i went to use it today to put credit on my account and after scraping away the panel found that I couldn't read part of the code that was on the card how do I go about getting the card activated?

If the page that you postted from doesn't help then you will need to try contacting iTunes support (you will need to give them as much of the serial number and activation code from the card as you can read) : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then iTunes Cards And Codes

How can I set the new version of firefox so that things I write in journals and other things are remembered in case I accidentally navigate away from the page?

In Firefov version 3 there is a feature that will remember what I have typed in a journal or note entry before posting it. This is not like an autofill because the test disappears if I navigate too many pages away from it. The usefulness of it was that if I accidentally navigated away from the page before sending my message or posting my journal, I could just press the back button and what I had written previously would still be there. I had to return to version 3.6.19 because version 5 does not seem to have this feature enabled unless you preform a very specific routine. You have to re-enable the ability of firefox to save tabs when exiting. then you have to close down firefox while saving the tab with the page you wish to write a journal on pulled up. Then when you bring firefox back up, you can type on the saved page and if you accidentally navigate away from it, you can hit the back button and it is saved. However, this goes away when you refresh the page or try it on any other page. I would like to know if it would be possible for me to enable this feature on firefox 5, or if I will have to continue using version 3.

Try using this extension. <br />
https://addons.mozilla.org/en-US/firefox/addon/textarea-cache/

My Macbook Pro is at a "death crawl" pace, and I'm a hundred miles away from an Apple Store!

Please help! All of a sudden, my Macbook Pro has slowed to a death crawl. I downloaded and installed OS X 10.8.3 but it was running pefectly fine for about 3 weeks. But after I downloaded and tried to install the latest safari update (my computer ran out of bettery and shut down before I could finish installing) my computer has slowed down to an excrutiating pace. It starts up very very slow and I constantly get the spinning beach ball, even to close an application or type. I tried starting in safe mode, clearing my cache, running system repair, checking my RAM and CPU usage, and even tried re-installing. Might it be Mountain Lion? I also was trying to download a movie from a sketchy website at the time my computer took a **** on me, might it be that? Anyways, please help because I am hundreds of miles away from civilization and the nearest Apple Store. Thanks in advance!

First, back up all data immediately, as your boot drive might be failing.
There are a few other possible causes of generalized slow performance that you can rule out easily.
Reset the System Management Controller.
If you have many image or video files on the Desktop with preview icons, move them to another folder.
If applicable, uncheck all boxes in the iCloud preference pane.
Disconnect all non-essential wired peripherals and remove aftermarket expansion cards, if any.
Check your keychains in Keychain Access for excessively duplicated items.
Boot into Recovery mode, launch Disk Utility, and run Repair Disk.
Otherwise, take the steps below when you notice the problem.
Step 1
Launch the Activity Monitor application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Activity Monitor in the icon grid.
Select the CPU tab of the Activity Monitor window.
Select All Processes from the menu in the toolbar, if not already selected.
Click the heading of the % CPU column in the process table to sort the entries by CPU usage. You may have to click it twice to get the highest value at the top. What is it, and what is the process? Also post the values for % User, % System, and % Idle at the bottom of the window.
Select the System Memory tab. What values are shown in the bottom part of the window for Page outs and Swap used?
Next, select the Disk Activity tab. Post the approximate values shown for Reads in/sec and Writes out/sec (not Reads in and Writes out.)
Step 2
If you have more than one user account, you must be logged in as an administrator to carry out this step.
Launch the Console application in the same way you launched Activity Monitor. Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Select the 50 or so most recent entries in the log. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V). You're looking for entries at the end of the log, not at the beginning.
When posting a log extract, be selective. Don't post more than is requested.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some personal information, such as your name, may appear in the log. Anonymize before posting. That should be easy to do if your extract is not too long.

Changeing a site from Muse to Dreamweaver in business catalyst

HI guys, I have used various forums in the past to answer many questions about web design but never have I actualy asked a queastion - I really hope someone can help me please! (I can't seem to find a simple answer anywhere!)...
So here goes...
Being new to web design I created my very first site in Adobe Muse. My reasons for this were coming from a graphics/ print bacground the transition between the programs were really easy. I created my muse site quickly and uploaded it to business catalyst (incredibly easily) under the domain www.keep21.co.uk.
However as I progressed in learning more about web I decided to try and move away from Muse because I wanted to have more control of the code. For this reason I started to learn Dreamweaver. Being a person who never does anything by half I decided I would start from the basics and firstly learn HTML and CSS before I looked into the program. Having gotten my head around that I created a root directory and began to re-create the site I had built in Muse by hand-coding it into Dreamweaver. I made a few changed a long the way to simplify the design and I am now happy enough to take this site live (replacing the muse site I'd already created). HOWEVER.......... I have noooooo idea how to do this and have become very confused.
Can anyone please explain how to do this please? So to re-iterate I am looking to replace the files I have on business catalyst for the site 'keep' with my new dreamweaver site.
When I started the site I created a root directory and have four basic pages within the folder (index.html, about.html,pricing.htm and contact.html) I a lso have images, templates and CSS ready to go.
Any ideas?
Kind regards
Hannah

Hi INTW,
While in Dreamweaver, Go to Site>>Manage Sites... >>Import Business Catalyst Site
Login if prompted and then select the site from the list and choose your current root folder
A connection will be automatically setup.
If you left the download entire site checked, the current remote site folders and files will be downloaded to your root.
All you have to do is upload your new files then go to your admin and set the 'site's start page'.
That's all there is to it.
PS, id suggest you 301 redirect the old pages instead of deleting them.

Business Catalyst Panel in Dreamweaver 6

I am having trouble getting the Business Catalyst panel in Dreamweaver CS6 to work. The panel works just fine on another computer using Dreamweaver CS 5.5, but I cannot get CS6 to show any of the standard BC panel elements. I've tried the few solutions suggested in the forum, but I have to resort to sticking with Dreamweaver 5.5 to work with Business Catalyst sites.
It appears that this subject has been covered for several months. Is there a fix for Dreamweaver CS6?
Dreamweaver CS6 - Mac
Dreamweaver CS 5.5 - Windows
Thanks.

Ah, okay. What that tells me is you may not have set up your website properly in CS6. What I am guessing happened is you set it up the old way using the extension?
My next suggestion would be to delete the site from your Site definitions.
Sites -> Manage Sites -> (Select the site you are having problems with) -> then click on the '-' in the bottom left corner.
Then you need to import the site from the site manager - not from the extension like you used to do.
Use the Import Business Catalyst Site button in the site manager and that should properly set up your site in CS6.

OS x 10.7.2 hangs, resumes when clicking away from active window

I have a 2010 iMac i3 running 10.7.2 - configured as shown in the About pic.
Lately, it has become very slow and unstable - by that I mean that Safari is very slow, mail hangs and I get a beach ball multiple times.. I did a Disk verify and repaired some issues. I have also verified and repaired permissions. The problem mostly occurs in Safari and Mail - I either get a beach ball when surfing or entering information, but have noticed that it corrects if/when I click away from the active window and return. Mail does a similar thing - a new message will 'hang' in that it is translucent and I cannot enter anything, but if I click away from the active window, it will correct and I can continue. I appears to be intermittant and I cannot get it to happen on command. I checked the Activity Monitor and do not see any processes that are eating processor and I have plenty of free memory - currently up over 6 days and 0 page outs. Any help would be greatly appreciated. I do have a PC laptop running Win & and a 2011 MBA both on the same network (wireless) and neither have any lag/slow issues.
Thanks!

You mentioned you have "plenty of free memory" but did not state how much is Free when you are getting beach balls. Leave Activity Monitor open and click the System Memory tab. OS X likes to have approximately 500MB or more of FREE RAM, if you get a beach ball and the FREE RAM is in the 500MB or less range then you would benefit by upgrading the RAM.
I would also STRONGLY recommend reading the XLab's Spinning Beach Ball of Death article, it's a valuable resource for troubleshooting this issue.

Hi. I have temporarily moved away from home. I am using a different internet connection, and I have lost my bookmarks. How do I get them back?

Hi. I have temporarily moved away from home. I am using a different internet connection, and I have lost my bookmarks. How do I get them back?

Generally speaking, your bookmarks are private to your computer, and if you set up multiple Firefox profiles on your computer, to the one profile.
Your bookmarks might be available to you at another location if you used the Sync service. In order to connect a new computer to the Sync service when you aren't near your old computer, you need a recovery key. https://support.mozilla.org/en-US/kb/share-bookmarks-tabs-and-more-your-other-computers#w_what-if-im-not-near-my-first-computer
If you didn't use Sync or can't access your account, someone with access to your old computer could email you your bookmarks. Since there is a range of different ways to do that and the best choice might depend on what you can expect the person you ask to be able to do... could they start up Firefox in your profile and follow menu steps to export a file? Could they drill down into a hidden folder on the system, zip a file, and mail that to you? Etc.

Premire Pro CS6 crashes every time I multitask away from it

Just like the topic says, every time I swtich to another application besides Premire Pro CS6, the application freezes/crashes. I get the following error message:
Adobe Premire Pro CS6 has stopped working. A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is availible.
Windows 8 machine w/ a Matrox MX02 connected.

my machine is a 6 core amd phenom ii clocked at 2.8ghz w/ 4gb of ram and an ssd main drive. sure i could spring for more ram but overall the system is quite performant.
i know that video capture and editing is higher bandwith than audio work but in this case the system is under no load. fresh project, one audio clip on the timeline. multi-task away from PPCS6 and the program hangs. my cpu, ram and disk ussage are non-existant at that point, don't think i need a faster pc.
this is most definitely a bug, somewhere between PPCS6 and the Komplete Audio 6 interface. i've got the latest drivers, control panel, and firmware for the audio interface and the latest PPCS6 from CC. submitted a bug to the black box of https://www.adobe.com/go/wish/ and with the hardware manufacturer.
for now my work around is connecting the Matrox MX02 audio output to line inputs 1/2 on the Komplete Audio 6 and use the interface's direct monitoring feature to listen without any latency. jury rigged solution =[ but it works until i hear anything back from the true creators.

Spaces switches away from application when moving window to another monitor

Using multiple monitors in Mavericks:
I often want a window from the same application on each monitor. Why? Because I'm working in one window, and I want to refer to another. Mostly it's the brower (Firefox), but sometimes it's Word or Excel too although I think this is a Mavericks issue.
Here's the issue: When I move the a window to another monitor, Spaces on the original monitor changes away from the current application.
This is frustrating, because I have to keep Cmd Tabbing to get back to my original application on both monitors... how do I prevent this from happening?
Thanks!

This reply from Grzegortz Krzminski was helpful - problem solved:
"Hover your mouse over the tasbar icon of the application (the thumbnail preview appears) > right click on the thumbnail preview > select Move > hold the button and move the window."

Tabs float away from panel in Dreamweaver

Similar Messages

Maybe you are looking for