Tabs names are not displayed in Report Composer screen of XL Reporter

Hi Buddies,
Below mentioned is the current version of my SAP Business One.
SAP Business One 2007 B (8.60.033) SP: 00 PL: 06.
The problem I am facing is, I cant see the names of the tabs in the Report composer of XL Reporter that comes inbuilt in 2007B. Instead of tab names am getting a combination of alphabets& numbers....... like B1_17_1536 in place of Finacials , B1_30_10496 in place of Budget_Setup, n so on ...
Could someone help me out in sorting out this problem????????? Is there any other patch level that can be upgraded for rectifying this .......
Regards,
AnSan

Check this thead:
[Re: Run time 430 error Class does not support automation]
Also check this SAP Note
[https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/smb_searchnotes/display.htm?note_langu=E&note_numm=1223041]

Similar Messages

All fields are not displaying in the infotype screen control

Hello Everybody,
All the fields from infotype 2001 and 2002 are not getting displayed in the screen control for these infotypes and
when I checked the screens for these infotypes, the mod. groups/functions has not been set for field 'Group3' for those
infotype fields.
Is there a way I could set this field ' Group3' for these infotype fields also ? Can it be done thru screen exit and if yes could
anyone tell me what's the screen exit for these infotypes ?
Thanks
Alok

solved it myself.

In Infopath - From User Group webservice First & Last Name are not displaying

Hi, I am working on Internet faced Infopath Sharepoint 2010 web application.In Infopath form we used a User Group web service to retrieve the first and last names when opening the form. In Development environment its working fine (Ex:- http://sharepoint2010dev:45/)
then we extend the webapplication with domain name in url.(Ex:http://Domainsp:80/) then the first and last names from User Groups is not working.
Please give your suggestions to resolve this isssue.
Any help is appreciated..!

Hi,
According to your post, my understanding is that the User Group web service not worked when extend the web application with a domain name in URL.
Did you change the URL to the UserGroup web service in the Data Connection Wizard?
As you had changed the URL, I think you should change the URL(http://<site>/_vti_bin/UserGroup.asmx), then check whether it works.
http://blog.ianchivers.com/2011/01/using-sharepoint-usergroup-web-service.html
Thanks & Regards,
Jason
Jason Guo
TechNet Community Support

I am trying to set up new folders under another e-mail in my inbox. The folder names are not displaying under the e-mail name. How can I get them to appear?

In my mail program on my Mac Book Pro I cannot get new folders to appear / be listed under a second e-mail account. They show up at the bottom of the window but not at the top as do the other folders in the initial e-mail account. How can I get my folders to appear?

- It does not make any difference what ID was used for setup.
- I would delete the email account from the iPod and then Goog for how to set up the account for yur particular provider. Example is: setup earthlink email on iphone
YOU can also go to your provider's support site and they should have instructions.

Filter values are not displayed in the Popup Screen

Hi Gurus,
I have executed the query from the Query Designer using Execute to the browser and tried to filter the values for 0plant
Then i am getting the values as question mark '?????' for Key as well as Text.
Note: I am not getting the key values for any of the characteristics.... in any report...
Is there any setting need to done in BI or Portal side...
Please help me if any one got a similar issue....
Thanks in Advance
Seshu
Edited by: seshagiri.rao on Oct 25, 2010 2:19 PM

Hi Vandana thanks for the reply.... i have been waiting from yesterday... to see some replies....
The values in the BW are ok & i have activated the master data too..
I am getting all the filter values for the query in RSRT, but when i execute the same query to the browser i am getting the values as '????' in the filter...
Eg.
Plant Key Plant medium Text.....
but when i select a particular row and add the values i can see the data as below.
1901 Bhubaneswar Depot
Please let me know if any more information is needed.
Regards
Seshu

Compounded characteristic are not displayed in the variable screen (BI 700)

Hi Experts,
How to display compounded characteristic in the variable screen of queriies?
Example :
IO 0PROFIT_CTR is compounded to 0CO_AREA. Tryimg to select 0PROFIT_CTR via a variable,
only values of 0PROFIT_CTR are displayed in F4 opo up, not those of 0CO_AREA.
0CO_AREA is not restricted in any way in query definiton.
This happens in BEx Analyser as well as in web apllication.
Did anybody face this issue? How to solve it?
Thanks in advance for helpful replies.
Regards
Joe

Hi,
Thanks for replies. Possibly I did't explain my problem i a correct way.
'I 've a variable for 0PROFIT_CTR. When I call F4 , values for 0PROFIT_CTR are displayed
e.g. as
7062 PC 7062
7062 PC /062
My problem is, that these PCs belong to different Co_areas. so i expected
3200 7062 PC 7062
4300 7062 PC 7062
3200 an 4300 are representing compounded Co_areas in this example. In 3.5 this worked perfectly,
if Co_areas was not restricted itself with a variable or a defined value.
Now I'm looking for the option to achieve this as well in 700.
Regards
Joe

In query, turkish column name is not displayed correctly?

In my characteristic and key figure infoobjects , i used turkish characters for explanation but in Bex they are displayed as illegal characters for column names.
How can i correct this or where would i make a mistake?
Thanks.

Hi Tuncer,
I am dealing with the same problem you had.
Turkish characters in the column names, infocube names are not displayed although in BW turkish characters are displayed properly. Did you solve your problem about Turkish characters in column names.
If you could solve, I would be glad to hear your solution.
Thank you.
Mehmet Cekdemir

Users are not displaying in Management Console's Sessions (AS Java)

Hi,
Recently we upgraded our Development Server to EHP 7.11.
In SAP Management Console, inside AS Java, when we are trying to view the Sessions, in the User Column the user names are not displaying.
Those users are authenticated through UME.
Before upgrading users logins were displaying.
Please help us to rectify this problem.
Thanks and Regards
Ravi Shankar K

Did you try to run the MMC on url. http://hostname:5xx13.
where xx denotes the instance no of thet host.
Thanks
Rishi Abrol

Group tabs name no longer displays in taskbar

I just updated Firefox again to 11.0. Before the previous update, all my group tab names would appear in the taskbar, also at the upper left after the Firefox symbol. Now they don't, just whatever tab happens to be up in that group, but the group is still named. How do I get it to work so that the tab groups name appears in the taskbar rather than the name of the page that was last looked at?

I have a similar problem. My Group Tab Names would appear as the name in the window title bar (I don't need the name of the tab as I have the tab for that), but after the latest update the Group Tab Name does not display as the window name (the current tab name is the title of the window) and I have to go digging for my Group Tab Names. This is a really pain that I lost the nice feature of finding the Group Tab using the window title. I hope some how we can get this back.

Enabled UDF's are not displaying in XL Report Composer.

Hi,
I Enabled User Defined Fields (UDF) under manage user defined fields. But itu2019s displaying only Light dimensionu2018s fields. But Dimension attributeu2019s fields are not displaying in XL Report composer. How we can display Dimension attribute fields in XL Report.
Regds,
Sampath Kumar.

Hi,Danie Posthumus
First of all we are not able to see my User define filed in report composer except for light dimensions type. Only we are getting Light Dimension Data Item type only we are not getting Dimension Attribute Data item type.
Regds,
Sampath Kumar Devunuri.

Header Fields are not displayed when there is no data in the report

Hi,
I am having this strange situation in my webi report.
When I refresh my report and when there is no data, column names are not being displayed in my report. All it is showing is two empty rows. When I have data, then report is displaying data along with column headings.
Please suggest me where I am going wrong.
Thanks,
VenMen

Thanks for the update.
Can you try this.
Run the report first time for some data.
When the report is rendered select the table that is displayed.
On the left pane side properties tab.
Expand display and check all the options
Show rows with empty measures
show rows with empty dimensions
Show when empty
Hope this will help
Regards
Kultar

Column Heading are not displayed in ALV Report using CL_SALV_DISPLAY?

Hi,
   I am using CL_SALV_DISPLAY class to display data. I Created an Internal Table Dynamically based fieldcatalog which was prepared based data at run time. When i displayed data using CL_SALC_DISPALY data is display in output but column headings are not displayed.
can anyone suggest me how to display heading in ALV using CL_SALV_DISPLAY class, My code is
      CLASS lcl_report DEFINITION
CLASS lcl_report DEFINITION.
PUBLIC SECTION.
    METHODS:
      display IMPORTING l_table TYPE string
                         l_fcat   TYPE string.
ENDCLASS.                    "lcl_report DEFINITION
      CLASS lcl_report IMPLEMENTATION
CLASS lcl_report IMPLEMENTATION.
METHOD display.
    DATA: gr_table   TYPE REF TO cl_salv_table.
    DATA: gr_columns TYPE REF TO cl_salv_columns_table,
          gr_column TYPE REF TO cl_salv_column_table,
          ls_fcat    TYPE slis_fieldcat_alv.
    DATA: gr_display TYPE REF TO cl_salv_display_settings.
    DATA: l_o_functions TYPE REF TO cl_salv_functions_list,
          l_field    TYPE string.
    FIELD-SYMBOLS : <fs_table>    TYPE STANDARD TABLE,
                    <ft_fcat>     TYPE STANDARD TABLE.
Get the ALV object refering to the output table
    ASSIGN (l_table) TO <fs_table>.
    ASSIGN (l_fcat) TO <ft_fcat>.
    TRY.
        cl_salv_table=>factory(
          IMPORTING
            r_salv_table = gr_table
          CHANGING
            t_table      = <fs_table> ).
      CATCH cx_salv_msg.                                "#EC NO_HANDLER
    ENDTRY.
Add basic default functionality in the ALV report
Functions
    l_o_functions = gr_table->get_functions( ).
    l_o_functions->set_all( abap_true ).
    gr_columns = gr_table->get_columns( ).
    gr_columns->set_headers_visible( abap_true ).
Display the list
    gr_table->display( ).
ENDMETHOD.                    "extract
ENDCLASS.                    "lcl_report IMPLEMENTATION
*& start-of-selection declaration
START-OF-SELECTION.
PERFORM :
get store codes
    get_storecodes    USING      p_stfile
                      CHANGING   it_t001w,
fetching mard data
    read_mard_data,
preparing fieldcatalog for Final Data
    create_filedcat   USING      it_t001w
                                 it_site
                      CHANGING   it_fieldcat,
preparing structure & internal table for Final Data
    create_final_table_structure USING it_fieldcat,
prepare output data
    prepare_final_data.
*& end-of-selection declaration
END-OF-SELECTION.
PERFORM :
display data
    display_data    USING l_table
                          l_fcat.
*&      Form get_storecodes
FORM get_storecodes USING    p_p_stfile
                     CHANGING p_it_t001w LIKE it_t001w[].
DATA :
internal table for RAW
lt_raw    TYPE truxs_t_text_data,
rs_site   LIKE LINE OF rt_site,
l_index   LIKE sy-tabix.
FIELD-SYMBOLS :
field symbol for it_t001w
<fs_t001w>   LIKE LINE OF p_it_t001w.
calling function module to get Stores Data from File
CALL FUNCTION 'TEXT_CONVERT_XLS_TO_SAP'
    EXPORTING
      i_line_header        = 'X'
      i_tab_raw_data       = lt_raw
      i_filename           = p_p_stfile
    TABLES
      i_tab_converted_data = p_it_t001w[]
    EXCEPTIONS
      conversion_failed    = 1
      OTHERS               = 2.
IF sy-subrc <> 0.
    EXIT.
ENDIF.
SORT p_it_t001w BY werks.
CLEAR rs_site.
rs_site-sign   = 'I'.
rs_site-option = 'EQ'.
rs_site-low    = p_dccode.
APPEND rs_site TO rt_site.
IF it_t001w[] IS NOT INITIAL.
    LOOP AT p_it_t001w ASSIGNING <fs_t001w>.
      l_index   = sy-tabix.
      CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
        EXPORTING
          input = <fs_t001w>-werks
        IMPORTING
          output = <fs_t001w>-werks.
      MODIFY p_it_t001w FROM <fs_t001w> INDEX l_index.
      IF <fs_t001w>-werks GE s_site-low AND <fs_t001w>-werks LE s_site-high.
      append site to ranges
        CLEAR rs_site.
        rs_site-sign   = 'I'.
        rs_site-option = 'EQ'.
        rs_site-low    = <fs_t001w>-werks.
        APPEND rs_site TO rt_site.
        CONTINUE.
      ENDIF.
    ENDLOOP.
    SORT p_it_t001w BY werks.
    SORT rt_site.
ENDIF.
ENDFORM.                    " get_storecodes
*&      Form create_final_table_structure
FORM create_filedcat   USING    p_it_t001w      LIKE it_t001w[]
                                p_it_site       LIKE it_site[]
                       CHANGING p_it_fieldcat   LIKE it_fieldcat[].
FIELD-SYMBOLS :
field symbol for p_it_t001w
<fs_t001w>     LIKE LINE OF p_it_t001w,
field symbol for p_it_site
<fs_site>      LIKE LINE OF p_it_site.
DATA :
fieldname
l_fieldname    TYPE slis_fieldname,
workarea for site ranges
rs_site        LIKE LINE OF rt_site.
CLEAR : l_fieldname, rs_site.
l_fieldname    = p_dccode.
PERFORM
prepare fieldcatalog
build_fieldcatalog USING :   'MTART'      'CHAR'        '5' ,
                               'MTBEZ'      'CHAR'        '25' ,
                               'MATKL'      'CHAR'        '6' ,
                               'WGBEZ'      'CHAR'        '20' ,
                               'MATNR'      'CHAR'        '18' ,
                               'MAKTX'      'CHAR'        '30' ,
                                l_fieldname 'CHAR'        '17' .
create header for excel
PERFORM create_excel_header USING : 'Division',
                                       'Divsion Description',
                                       'MC Code',
                                       'MC Description',
                                       'Article',
                                       'Article Description',
                                        l_fieldname.
loop for creating fieldcatalog
LOOP AT it_site ASSIGNING <fs_site>.
    READ TABLE it_t001w ASSIGNING <fs_t001w> WITH KEY werks = <fs_site>-werks
                                                              BINARY SEARCH.
    IF sy-subrc = 0           AND <fs_t001w> IS ASSIGNED AND
       <fs_site> IS ASSIGNED AND <fs_site>-stock GT 0.
      CLEAR : l_fieldname, rs_site.
      l_fieldname    = <fs_site>-werks.
    prepare fieldcatalog
      PERFORM build_fieldcatalog USING : l_fieldname    'CHAR'   '17'.
    create header for excel
      PERFORM create_excel_header USING l_fieldname .
      CONTINUE.
    ENDIF.
ENDLOOP.
l_fcat = 'it_fieldcat[]'.
ENDFORM.                    " create_final_table_structure
*&      Form build_fieldcatalog
FORM build_fieldcatalog USING    p_fieldname      TYPE slis_fieldname
                                  p_datatype       TYPE datatype_d
                                  p_length         TYPE intlen.
DATA : ls_fieldcat    LIKE LINE OF it_fieldcat.
CLEAR : ls_fieldcat.
ls_fieldcat-fieldname   = p_fieldname.
ls_fieldcat-datatype    = p_datatype.
ls_fieldcat-intlen      = p_length.
APPEND ls_fieldcat TO it_fieldcat.
ENDFORM.                    " build_fieldcatalog
*&      Form create_final_table_structure
FORM create_final_table_structure USING    p_it_fieldcat.
Create dynamic internal table and assign to FS
CALL METHOD cl_alv_table_create=>create_dynamic_table
    EXPORTING
      it_fieldcatalog = it_fieldcat
    IMPORTING
      ep_table        = t_table.
ASSIGN t_table->* TO <ft_final>.
ENDFORM.                    " create_final_table_structure
*&      Form create_excel_header
FORM create_excel_header USING    p_p_fieldname.
DATA : ls_header LIKE LINE OF it_header.
CLEAR ls_header.
ls_header-col_name = p_p_fieldname.
APPEND ls_header TO it_header.
ENDFORM.                    " create_excel_header
*&      Form prepare_final_data
FORM prepare_final_data .
DATA          : l_matnr       LIKE g_matnr,
                  l_werks       LIKE g_werks,
                  l_index       LIKE sy-tabix.
FIELD-SYMBOLS : <fs_mard>     LIKE LINE OF it_mard.
Getting No. of Lines in IT_MARD internal table
DESCRIBE TABLE it_mard LINES g_lines.
LOOP AT it_mard ASSIGNING <fs_mard>.
    l_index    = sy-tabix.
    IF l_matnr IS INITIAL.
      l_matnr = <fs_mard>-matnr.
      CLEAR : l_werks.
      l_werks    = <fs_mard>-werks.
      UNASSIGN : <fs_value>, <fs_final>.
    Create dynamic work area and assign to FS
      CREATE DATA t_line LIKE LINE OF <ft_final>.
      ASSIGN t_line->*   TO <fs_final>.
      ASSIGN COMPONENT 'MATNR' OF STRUCTURE <fs_final> TO <fs_value>.
      <fs_value>        = <fs_mard>-matnr.
      ASSIGN COMPONENT l_werks OF STRUCTURE <fs_final> TO <fs_value>.
      <fs_value>        = <fs_value> + <fs_mard>-labst.
    getting Article Type,MC & its Descriptions
      PERFORM get_other_data    USING     l_matnr
                                          l_werks.
    ELSEIF l_matnr <> <fs_mard>-matnr.
      APPEND <fs_final> TO <ft_final>.
      CLEAR l_matnr.
      l_matnr = <fs_mard>-matnr.
      CLEAR : l_werks.
      l_werks    = <fs_mard>-werks.
      UNASSIGN : <fs_value>, <fs_final>.
    Create dynamic work area and assign to FS
      CREATE DATA t_line LIKE LINE OF <ft_final>.
      ASSIGN t_line->*   TO <fs_final>.
      ASSIGN COMPONENT 'MATNR' OF STRUCTURE <fs_final> TO <fs_value>.
      <fs_value>        = <fs_mard>-matnr.
      ASSIGN COMPONENT l_werks OF STRUCTURE <fs_final> TO <fs_value>.
      <fs_value>        = <fs_value> + <fs_mard>-labst.
    getting Article Type,MC & its Descriptions
      PERFORM get_other_data    USING     l_matnr
                                         l_werks.
    ELSE.
      CLEAR : l_werks.
      l_werks    = <fs_mard>-werks.
      ASSIGN COMPONENT l_werks OF STRUCTURE <fs_final> TO <fs_value>.
      <fs_value>        = <fs_value> + <fs_mard>-labst.
    ENDIF.
    IF l_index = g_lines.
      APPEND <fs_final> TO <ft_final>.
    ENDIF.
ENDLOOP.
l_table = '<ft_final>[]'.
ENDFORM.                    " prepare_final_data
*&      Form get_other_data
FORM get_other_data USING    p_l_matnr
                              p_l_werks.
FIELD-SYMBOLS : <fs_mara>     LIKE LINE OF it_mara,
                  <fs_t023t>    LIKE LINE OF it_t023t,
                  <fs_t134t>    LIKE LINE OF it_t134t,
                  <fs_makt>     LIKE LINE OF it_makt.
READ TABLE it_mara ASSIGNING <fs_mara> WITH KEY matnr = p_l_matnr.   " BINARY SEARCH.
IF sy-subrc = 0 AND <fs_mara> IS ASSIGNED.
    ASSIGN COMPONENT 'MTART' OF STRUCTURE <fs_final> TO <fs_value>.
    <fs_value>        = <fs_mara>-mtart.
    ASSIGN COMPONENT 'MATKL' OF STRUCTURE <fs_final> TO <fs_value>.
    <fs_value>        = <fs_mara>-matkl.
    READ TABLE it_makt ASSIGNING <fs_makt> WITH KEY matnr = <fs_mara>-matnr   BINARY SEARCH.
    IF sy-subrc = 0 AND <fs_makt> IS ASSIGNED.
      ASSIGN COMPONENT 'MAKTX' OF STRUCTURE <fs_final> TO <fs_value>.
      <fs_value>        = <fs_makt>-maktx.
    ENDIF.
    READ TABLE it_t023t ASSIGNING <fs_t023t> WITH KEY matkl = <fs_mara>-matkl BINARY SEARCH.
    IF sy-subrc = 0 AND <fs_t023t> IS ASSIGNED.
      ASSIGN COMPONENT 'WGBEZ' OF STRUCTURE <fs_final> TO <fs_value>.
      <fs_value>      = <fs_t023t>-wgbez.
    ENDIF.
    READ TABLE it_t134t ASSIGNING <fs_t134t> WITH KEY mtart = <fs_mara>-mtart BINARY SEARCH.
    IF sy-subrc = 0 AND <fs_t134t> IS ASSIGNED.
      ASSIGN COMPONENT 'MTBEZ' OF STRUCTURE <fs_final> TO <fs_value>.
      <fs_value>      = <fs_t134t>-mtbez.
    ENDIF.
ENDIF.
ENDFORM.                    " get_other_data
*&      Form display_data
      text
FORM display_data USING    p_l_table
                            p_l_fcat.
DATA:
Variable for Object Creation
o_report TYPE REF TO lcl_report.
CREATE OBJECT o_report.
o_report->display( EXPORTING l_table = p_l_table
                               l_fcat = p_l_fcat ).
ENDFORM.                    " display_data

I don't know how to read the code you pasted or I would have checked this myself.
Do your fields in the internal table reference dictionary objects or elementary types? If not using dictionary types, the column names will be blank by default. If you can't change your fields to be dictionary types, you can try this to change the column names:
I made a method inside my local class to add the names:
        call method set_colname
          EXPORTING iv_tab = alv_tab
                    iv_colid = 'xxxx' "fieldname from the table
                    iv_stxt = text-t54
                    iv_mtxt = text-t55
                    iv_ltxt = text-t55.
METHOD set_colname .
data:
          alv_cols type REF TO cl_salv_columns_table,
          alv_col type REF TO cl_salv_column.
TRY .
*... Change fieldnames
        call METHOD iv_tab->get_columns RECEIVING value = alv_cols.
        call method alv_cols->get_column EXPORTING columnname = iv_colid RECEIVING value = alv_col.
        IF iv_stxt <> ''.
          CALL METHOD alv_col->set_short_text EXPORTING value = iv_stxt.
        ENDIF.
        IF iv_mtxt <> ''.
          CALL METHOD alv_col->set_medium_text EXPORTING value = iv_mtxt.
        ENDIF.
        IF iv_ltxt <> ''.
          CALL METHOD alv_col->set_long_text EXPORTING value = iv_ltxt.
        ENDIF.
   CATCH cx_salv_not_found.
ENDTRY.
ENDMETHOD. "set_colname

Substitution string used in custom Report column name does not display in PDF version of report

I am using Apex 4.2.6.00.03, Apex Listener 2 via Glassfish4 and have set up all my applications and reports on this system. We previously used Oracle 10.2, with Apache with a custom fopping document.
My issue is that I have a report that has custom column headings using a substitution string to pull in the begin or end date for the report. When the report is run and displayed, the column headings appropriately display the date. However, when I try to set up the Print to PDF option, the column headings are not displaying correctly.
Is it possible to use a substitution string in the column heading? I am able to use the substitution string in the Page Header and Page Footer and those display correctly.
In the Report Attributes setup I have set the "Strip HTML" to Yes and I have four columns that are using the &"ITEM NAME". string. See below for actual display:
The report column headings in APEX displays correctly (bold is the substitution detail):
Fund Account Description Balance 07/01/2014 Budget/Goal FY 14-15 YTD Actual 02/28/2015 Ending Balance 02/28/2015
In the Print Attributes setup, when I get to the Report Columns section, the Heading column displays the headings as set up in the Report Attributes custom and I am not able to edit these names. See below:
In the version of the report that is Printed to PDF I get the following for display:
Fund Account Description Balance %26amp;P347_BEGIN_DATE. Budget/Goal %26amp;P347_FY. YTD Actual %26amp;P347_END_DATE. Ending Balance %26amp;P347_END_DATE.
Any assistance would be greatly appreciated.
Thanks,
Pat

First, the misspelled word is a test object and not data.
Second, all data display correctly.
Third, text object is displaying the old misspelled word.
Fourth, I have eliminated the possibility that problems in of my pdf export routine cause this issue by exporting directly from Crystal Reports Viewer. I print the report to the crystal report viewer. The report looks good. The text object is spelled correctly. Then I click the Crystal Reports viewer's export button in the left upper corner and I export to both EXCEL and PDF. The excel export looks good. The pdf export is misspelled. All the export occurs internally in Crystal reports.
Fifth, I found outthat all users who have this problem have the ADOBE PDF writer installed. I am just suspicious that ADOBE writer is interferring with Crystal export
Sixth, I cannot recreate this problem on any of our development and test machines. It only happens on end-user laptops.
Seventh, I changed the name of the report that had this problem and created a new version and installed on end-user laptop. The behaviour still persists. User saved the report as both RPT and PDF. RPT export looks good. PDF version has the spelling problem. Data on both reports is up-to-date and good. I copied the same RPT export to my PC and exported it to PDF, the pdf looks good. That is why I think something on the end-users laptops is causing the export to use some cached template.
One more thing I did was to change the report name in VB.NET project, recreated a new package and installed on end-user's laptop. The same exact problem is still there.
I have worked with Crystal Reports more than 15 years and I have never such a weird behaviour before. I know this sounds very weird. We are all baffled by what is happening.

Groups are not displaying in the user's member of tab

Hi ,
We have a issue,
After mapping any AD group in CMC,the groups and users are displaying in the cmc list. but when we go to the properties of the user and member of option ,the groups are not displaying .
After restarting the CMS every thing works fine.
Every time after adding a new user we should restart the CMS, it is very difficult for us as number of users are working on this .
We are using number of AD groups.
Is there any resolution for this with out restarting the CMS.
Thank you in advance.
Environment -
BO XI3.1,
LDAP authentication.
Thanks & Regards,
Collin.

The LDAP graph is responsible for showing the membership when viewing the user properties, an issue like this would indicate the graph is not auto updating. It normally builds when starting the CMS then every 15 minutes or so for new users (depending on system activity). It shouldn't lose any info (if it does this indicates a caching or communication problem with AD). There is a graphtimeout setting in the registry (search SAP notes) if this were disabled then it may cause similar symptoms.
I'm not aware of any bugs in 3.1 causing this behavior so you may need to open a case with support (authentication team) to help troubleshoot.
Regards,
Tim

Portal Forms are not displayed in the new migrated environment.

Hi All,
We have a distributed Portal environment. Application server and Portal Repository running on one system(System1) and one more portal repository and portal components existing in anothor system(System2). Through DAD we connect to System2 and access the componets. Recently we have done a migration.The Database along the Portal Repository in system2 was migrated to a new server. For this we have edited the DAD and made the necessary changes. But after the migration, the Forms residing in migrated portal repository(System2) are not getting dispayed.The rest of the things(Reports, Pages, Links,LOVs etc..) are working fine. The forms are not getting displayed in the pages where it's added. When forms are run from RUN link in Develop Tab it's showing ERROR but not the cause of the error. Will anyone tell what changes I have to do to make the Forms work?
Thanks in Advance,
Tom

Hi DIAdemUser1,
This feature was indeed removed. R&D felt like it caused more confusion than benefit, and I agree. I do apologize to you and others who liked the feature that has now disappeared. When DIAdem 9.0 released the custom properties in the Data Portal showed their data types, but that feature was also removed in favor of simplicity. I often miss that feature, but it's for the greater good.
Brad Turpin
DIAdem Product Support Engineer
National Instruments

Tabs names are not displayed in Report Composer screen of XL Reporter

Similar Messages

Maybe you are looking for