Tabs not appearing on ruler of Report Designer Component

I'm using the Report Designer Component in a Visual Basic application. Everything seems to be working fine except for some reason I can't seem create a tab on the ruler. I believe that all I should have to do is click on the ruler, is that correct?
Has anyone else had this problem??

Please re-post if this is still an issue to the Legacy Application Development SDKs Forum or purchase a case and have a dedicated support engineer work with you directly

Similar Messages

  • Shipping tab not appearing in PO

    Dear Sir,
    I hv made all the relevend configuration and vendor creation for PO but still shipping tab not appearing in po.
    I dont know wht step i hv missed out, please advise what should i do.
    Looking forward for your quick response on th same.
    Regards
    Parul

    Hi Parul
    Pls check the following settings.
    1.     Define receiving plant for sto. (Storage location also for this plant if required).
    2.     Assign receiving plant to company code.
    3.     Assign receiving plant to the supplying plants sales org, distribution channel.
    4.     Assign shipping point of supplying plant to receiving plant.
    5.     Maintain purchasing organization and assign it to receiving plant and company code.
    6.     Create receiving plant as a customer in supplying plant (normal customer creation).
    7.     Define shipping data for plants: imgu2014mm-----po-----setup sto.
                         Select receiving plant and assign customer number (previous step number)
                         Assign the sales area of supplying plant.
                         Select supplying plant assign the sales area of supplying plant
    8.     Assign delivery types and checking rules (imgu2014mm-----po-----setup sto)
    9.     Assign document types, one-step procedure, under delivery tolerance. (same above path)
    10.     Extend the material to the receiving plant.
    11.     For Second plant assign manual shipping point as of first plant (OVL2)
    Br.
    Ramana

  • HR BENEFIT:dependent tab not appear

    Dear Experts,
    I got problem with HR Benefit Administration.
    When I do the Enrollment process, dependent tab not appear.
    I check in IT0021, family member was there.
    at SPRO - at step "Claim Variant for Plan" I did check claim grouping
    so, at "Claim Rule for Plan" I choose the claim group and add dependent cover.
    my problem is when uncheck the claim grouping at claim variant for plan - dependent tab at enrollment appear.
    BUT I need those claim grouping as for rule plan, but then dependent tab not appear.
    how to make it appear?
    is there any missing configuration?
    thanks in advance
    Edited by: nzworld on Oct 18, 2011 4:39 AM

    Hi,
    anyone got this situation?
    thanks

  • Excise Tab not appearing in MIGO Screen

    Excise Tab not appearing in MIGO Screen
    Reg
    Sunil

    Hi,
    For GR, which movement type you are using...?
    If it is 103, you will get the excise invoice tab only in 105 GR.
    If it is 101 only, check the following configuration.
    SPRO-Logistics General-Tax on goods movements-India-Business Transactions-Incoming Excise invoices-Specify which movement type involve excise invoices.
    Please revert for further analysis.
    Regards,
    Siva

  • Vendor evaluation tab not appearing in ML81N

    Hi,
    Vendor evaluation tab not appearing in ML81N.
    Please suggest

    Hello,
    Please maintain vendor evaluation for related purchasing organization. Afterwards, vendor evaluation tab will be appeared in ML81N.
    Thanks.
    Regards,

  • Results recording tab not appearing in QA32

    hi,
    can anyone tell me why results tab not appearing in QA32 , is there any authorisation missing?

    Just check which roles are added to that used id
    selec 1 role that is relevent to inspection (result recording) and add QE01 t_code in that role.
    take help from ur basis guy for this.

  • Part 1 generated while creating migo but display mode Excise tab not appear

    Hi
    I created migo Part 1 generated. and excise tab also appeared.
    but while display mode Excise tab not appearing. In table J_1part1 Part 1 details are updated.
    Please explain What could be the reason
    Regards
    sitaram

    Hi
    Please any body give me valuable suggesition.
    Thanks and regards
    sitaram

  • Quantity is not appearing on Cost Center report S_ALR_87013611

    Hi Fellows,
    Quantity is not appearing on cost center report S_ALR_87013611. When we go to the line items it is appearing. Could you please help me in this regard.

    Hi,
       Please refer note 64120
    regards
    Waman

  • Shipping data tab not appearing while creating intercomapny STO PO

    Hi all,
    I am processing the intercompany stock transfer scenario. I have done all the necessary settings for the plant and intercompany billing, but while creating the purchase order I am unable to get the shipping tab as the system cant read the shipping data for the respective vendor. In turn I cant see the purchase order in VL10B.
    Kindly help in this.

    Hi,
    1. Please check in your vendor master  in T-code XK03
    2.  In vendor master , the plant might have defined as plant as vendor  in Tab purchasing data > Extras >additional purchasing data,
    3.If plant field is not appearing there then change plant field in vendor account group field status maintenance from suppress to optional & maintain in vendor master.
    Regards,
    Ajit

  • Excise tab not appearing for non cenvatable po

    Hi All,
            while doing MIGO , the excise TAB is appearing for cenvatable items.
    but in case of non -cenvatable item this TAB is not appearing in MIGO, is it like this.
    i have maintained in J1ID the excise material type as non-cenvatable. the excise tab is not appearing in MIGO.
    If i want to have excise tab in MIGO for non cenvatable material, what has to be done ?
    pl guide
    regards

    thanks,
          I have maintained every thing, this TAB is coming for cenvatable material, but not coming for non-cenvatable material.
    the material is excisable but we are not taking cenvat credit. so we have maintained it as non-cenvatable in j1id.
    Any reason that for the exciseable material where we are not taking cenvat credit, this TAB is not appearing?
    pl reply
    regards

  • New entries tab not appearing in tcode VOR1, VOR2 in application tool bar

    Hi guru's
    Suddenly overnight the new entries tab present in the application tool bar seems to have been vanished from tcode VOR1 & VOR2, in the sandbox, development & quality server, even when the client is open, i.e in tcode SCC4 we have allowed changes to be made, protection level is "0" and changes to repository and cross-client customising allowed.
    Please suggest where & what are the other changes I have to make so that I can get the new entries tab in tcode VOR1 & VOR2
    Thanks & best regards
    satish

    Hi Venkat
    That is where the problem lies. The sales organisation, distribution channel & division has been defined & assigned and even the respective sales area's has been assigned to the respective document types.
    But still the system ECC 6.0 does not allow to create any sales orders because the assgnment in tcodes VOR1 & VOR2 is still pending and the entries do not appear there by default.
    Once again the  distribution channels and divisions has to be assgined to the respective sales organisations in VOR1 & VOR2
    But since the new entries tab is absent I am not able to create any new sales orders because the assignment in tcodes VOR1 & VOR2 is pending.
    Please suggest a solution.
    Thanks
    satish

  • Excise tab not appearing in GR display

    Hi,
    After creating the Goods reciept, when we display the GR document the excise tab is not appearing. While creating only the excise tab appears and can enter all the excise details. But if want check the values entered in the display mode of the GR, we tab does not appear.
    Please let me know if any customising setting needs to be done so that this tab will appear in display mode also. We are on ECC 6
    Thanks,
    SR

    Hi,
    As per my understanding ......
    While Doing MIGO, Excise Tab appear at header level in Excise Tab and also at Item Level.
    But when u post part1  only, then Excise Entries also found there.
    But after posting Part1 in MIGO and Part2 in J1IEX,
    while going to back MIGO Document, Exicse Does not appear there becoz u post only part1 not part2.
    u can observe there entries like this
    During GR
                                        Material Stock            Dr.
                                        GR/IR clearing                        Cr.
      During Excise Invoice Credit           
                                        Cenvat Account          Dr.
                                        Cenvat Clearing                     Cr.
    Hope Clear U !
    Regards,
    Pardeep Malik

  • Object Ref Prof R/s tab not appearing in complaint Tx?

    Dear All,
    I added object ref profile in complaint transaction. But I am unable to see relationship tab at header or item. The same profile is working fine with Service order. But its not working in complaint transactions.
    Please suggest.

    Dear Arun
    Thanks for your valuable input. But pbm is if I use reference data tab then sold to party of the tx in which we are putting ref data and sold to party of ref data shoud be same..otherwise it will not allow to attach..
    Please suggest why relationship tab does not appear and is this product error?
    Thanks

  • Reciept element purchase requisition not appearing in  mrp order report

    Dear Gurus
    Receipt element purchase requisition is not appearing when I am trying to see the order report after running the mrp for the finished product .But the reciept element planned order is appearing for the semifinished products which are in the bom of the finished product.And if stock for raw materials are there then also it is showing the reciept element stock.Why is this happening ?
    Regards
    Sandip Sarkar

    Unable to interpret your query.
    Based on my guessing.... a PR is not visible for the Finished material as it must be a make material & if a planned order is showing up it means there is not enough stock to meet the demand. Now the dependent demand flows down from the finished to SFG & RM respectively & hence the supply proposal.
    The above is a straight forward planning cycle flow, so what the issue am not able to figure it out. Either you upload some screenshots & paste the link here or provide a detailed explanation to get a clear understanding.

  • Text Functions Not Appearing in PDF (Financial Reports)

    In the header of Financial Reports we are using common text functions to create the report titles with POVAlias and related functions. These headers correctly appear when printing or web viewing the reports. However, when viewing or printing to PDF - the header appears blank - the function results are not displayed.

    <p>Hi Brianeccher</p><p>We've the same problem. We use the financial reporting studio9.3.0.502. The background color from text boxes do not appear, whenprinting to pdf.</p><div dir="ltr" id="result_box">Did you find a solution?Thanks</div>

Maybe you are looking for

  • Issue while mapping two entity column into one entity column

    Not able to succeed with when trying to join 2 entity columns to an entity. Entity A Id, AName, ADesc, AQty Entity B Id, AName, BQty Entity C Id, AName, CQty Mapping Entity A to Entity B & Entity C with column reference, not able to succeed with two

  • Measuring different values with different intervals

    I have a program which is measuring temperatures every second (or how often I want it to) and writes this to a file. But now I want it to open a digital line to measure the current through a resistant and if the current is higher than a certain limit

  • Apply template to many pages

    Hi there, I have 100 html pages, and i want to switch the template from the old one to a new design. How could I do this quickly without opening each single one of them and "applying template" ? Thanks

  • Custom RFC model in ESS General Data

    Hi, I want to create a custom RFC model in generaldata component and personaldata component. This is my requirement. I want fax number in Generaldata view and I want to hide date of birth in personaldata view. I dont see fax number in model used for

  • External GPU in FCPX- Using a Thunderbolt Chasis with external GPU's in FCPX

    I recently ran across external expansion chasis here http://store1.sonnettech.com/product_info.php?products_id=413 Can I load these up with GPUs for use in FCPX? Will FCPX recognize and utilize mutliple GPU's at once?