Tabs Not Working on Published Website

I recently published a website to GoDaddy using Adobe Muse but for some reason two of my eight tabs re-direct to a generic 404: Page Not Found. How do I fix this issue?
http://buckeyeairfair.com/
I don't know if it will help but this is my website (the volunteer and vendor pages are the ones that don't work).

Hello Kelsey,
Were these pages exported from Muse? Go to the plan mode in Muse and right click/ Ctrl+Click on these two pages and check if the "Export Page" option is enabled. If they're not, enable them and then reupload the site.
Hope this helps.
Cheers
Parikshit

Similar Messages

Why do the "SHOW THE PREVIOUS PAGE arrows not work on some websites such as when I try to return to the previous page the arrows at the top right of the page are not dark black they are light grey and do nothing---HELPPPP

why do the "SHOW THE PREVIOUS PAGE arrows not work on some websites such when I try yto return to a previous page the arrows at the top right of the page do not work instead they are light grey instead black and do nothing---this is frustrating to not be able to return to the page before--HELP

If a page you go to opens in a new tab, there is no 'back' to go to. If that is the case, just close the tab and you'll be at the page you came from.

Top Nav buttons not working after publish, but works in app. WHY?

I have tried to find out why these buttons will not work after publishing. They work fine while in the iWeb app, but not when publishing. I do not have any objects near the top nav buttons. The first site went off without a hitch
<www.serenitycustompools.net> the second site began the problem with the last page, the nav buttons would not work. Now this 3rd site, none of the nav buttons at top will work after publish, but will work in app. Anyone else having the same probs? None of my pages have the same names or any punctuation marks, and they are simple one word named pages.
mini intel Mac OS X (10.4.9)

They all work for me, try clearing your browser cache or using another browser.

IWeb moves pictures by itself, links do not work when publishing to folder

When I first started using iWeb i would save the page I was working on and then publish it to a folder so I could look at it in Safari and it used to work fine. Now when I do this the pictures come up and they are pushed up halfway off of the top of the page and you aren't able to scroll down all the way to see the bottom of the background picture that I have. Also, the links to the other pages of the site do not work after publishing it to a folder. If anyone has any advice I would greatly appreciate it!
17" Powerbook G4 Mac OS X (10.4.6)

I uploaded it to a free host for now. here is the link: http://www.zendurl.com/garrett/cgi-bin/www.garrettramquist.com/Welcome.html

IE 11 - Open in new Tab Not Working

When I click on a link that should open in a new tab (or right-click and select Open in new Tab), IE11 Opens a new tab but the screen is blank, the URL is about:blank and the tab title is 'Blank Page'.
Windows 8.1 x64
Internet Explorer 11 (Desktop)
The 'Metro' version of IE 11 still works fine, it's just the Desktop version which is broken.
I've tried all the fixes listed in the similar thread, but none have helped.
IE 11 TABS NOT WORKING
IE 11 opens blank tab

Thanks, I ran a Command Prompt (Admin) and ran the following scripts:
ie8-rereg.32on64.cmd
ie8-rereg.64on64.cmd
Both seemed to execute correctly, but haven't made a difference.
Unfortunately they have never been a complete repair and now, due to security/obscurity have been made even less effective. There was an example in here a while ago in which the poster helped me see that exploiting the original manifests might have
been a better tack for a repair. IIRC they uncovered some registry corruption which seemed related to mshtmled.dll but which was not repaired by registering that module and was damage which was only hinted at by looking at the manifest.
The poster's repair was found by comparing registries from otherwise identical systems...
OMG look what this recollection has dredged up: <lol/>
http://social.technet.microsoft.com/Forums/ie/en-us/08f7a0f7-6f4b-4def-b399-12a0c281655a/ie9-wont-open-pages-just-give-a-new-tab-thats-blank?forum=ieitprocurrentver
Interestingly, I came across another oddity which might indicate the behaviour is some sort of change to the IE security settings. On a site I frequent http://www.makegamessa.com/ none of the links work.
They've all previously worked and they still work in other browsers, just not my IE. If you click a link it is supposed to open the page in the current window (i.e. not opening a new tab), but nothing happens. However, if I have the F12 developer tools open,
then the links all work as expected OR if I add the site to Trusted Sites the links also work.
That sounds like Active Scripting is inhibited. Scripting would be disabled in a Restricted security zone or in an Internet zone which was set to High level. Scripting would be enabled in a Trusted security zone. Scripting would be required
in order to use IE11 Developer Tools since that is its implementation. It hadn't occurred to me that that might provide an override for Scripting which had been otherwise inhibited.
FYI
Robert Aldwinckle

MY FIREFOX NEW TAB NOT WORKING NIETHER WITH + NOR WITH RIGHT CLICKING ON TAB OR DOUBLE CLICK ON TAB

MY FIREFOX NEW TAB NOT WORKING NIETHER WITH + NOR WITH RIGHT CLICKING ON TAB OR DOUBLE CLICKING ON TAB

'''Try Firefox Safe Mode''' to see if the problem goes away. [[Troubleshoot Firefox issues using Safe Mode|Firefox Safe Mode]] is a troubleshooting mode that temporarily turns off hardware acceleration, resets some settings, and disables add-ons (extensions and themes).
If Firefox is open, you can restart in Firefox Safe Mode from the Help menu:
*In Firefox 29.0 and above, click the menu button [[Image:New Fx Menu]], click Help [[Image:Help-29]] and select ''Restart with Add-ons Disabled''.
*In previous Firefox versions, click on the Firefox button at the top left of the Firefox window and click on ''Help'' (or click on ''Help'' in the Menu bar, if you don't have a Firefox button) then click on ''Restart with Add-ons Disabled''.
If Firefox is not running, you can start Firefox in Safe Mode as follows:
* On Windows: Hold the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
* On Mac: Hold the '''option''' key while starting Firefox.
* On Linux: Quit Firefox, go to your Terminal and run ''firefox -safe-mode'' <br>(you may need to specify the Firefox installation path e.g. /usr/lib/firefox)
When the Firefox Safe Mode window appears, select "Start in Safe Mode".<br>
[[Image:Safe Mode Fx 15 - Win]]
'''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, theme, or hardware acceleration. Please follow the steps in the [[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]] article to find the cause.
''To exit Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
When you figure out what's causing your issues, please let us know. It might help others with the same problem.

Print function is not working with certain websites, specifically PNC bank

When trying to print on specific websites, all that is printed is a blank page, no content. This specifically happens on PNC website, but has occurred on others as well.

Hi vermontgolfer,
I am sorry to hear that the printing is not working for this website. If you go to about:permissions and look for the website name you can check to see if there are any saved preferences that may be causing this.
Since they are printing blank pages, please make sure that you have updated to version 29.0.1 as this was a bug in pdf.js that was fixed with this update. If you are not using pdf.js you can reset the printing settings with these references: [[Fix printing problems in Firefox]]

Pause/Play functionality not working with publish to HTML5

Hi experts,
I am creating a Captivate course to be deployed on iOS and publishing to HTML5. We are using custom buttons (not playback controls) for navigation to advance through the slides. My client would also like Play/Pause functionality for some of our embedded (MP4) videos. I used the following tutorial to create these buttons to toggle the Play & Pause functionality:
http://www.youtube.com/watch?v=0v2F0NyEAfs
This worked PERFECTLY when previewed in a browser from Captivate, but does not work when published and launched in HTML5 format, from the same browser. I didn't use any Flash content, rollover functionalities, or anything noted in the limitations list for HTML5 output. The conditional functions I have set for my buttons are:
PAUSE:
Hide > SPI_Pause
Show > SPI_Play
Assign > cpCmndResume with 0
Assign > cpCmndPause with 1
PLAY:
Assign > cpCmndPause with 0
Assign > cpCmndRsume with 1
Hide > SPI_Play
Show > SPI_Pause
The issue I am encountering is that the video completely pauses itself the moment the pause button displays on the stage (no matter where I place it in the timeline). I'm not pressing it or anything, it just initiates the cpCmndPause function and disregards all the others I have set. From there the conditional sequences are rendered useless as the video is already paused even though I didn't press the button. I've verified this happens anywhere I try to use the cpCmndPause function.
I am running Captivate 6.1.0.309 on Mac OSX 10.8.2. I've tested the HTML5 output in Chrome and Safari with the same results. I did see a thread regarding a patch install (for 6.0.1xxx) that resolved some issues, but this appears to be an earlier version of what I have installed so this should have been resolved with my install?
Please HELP!

So, was this issue NOT resolved with the patch, or is this an entirely new/different issue?
It seems as though this functionality is pretty basic, so I don't understand why this is a restriction with HTML5 output? Please advise, if there are restrictions with advanced actions that are not noted in the HTML5 limitations documentation, then they should be.
Thank you, I too have a client deadline and have purchased this subscription based on the documentation Adobe has provided about the application's ability to publish to this new format.

Scroll to top in Safari is not working on certain website

Hi,
I know that tapping the top status bar bring me to the top of the page on safari, however it seems that on some website I usually visit, the scroll to top function is not working. The websites that I had this problem are : any wikipedia pages, any wikia pages, some wordpress blogs.
Are there anything that exist on those websites preventing me from using the scroll top function?

Thats most likely because the web page is made fr desk top computers and is not for mobile devices. Currently there is nothing you can do about it.

Not working, nothing publishes.

I just installed the new iweb 09. Publishing is not working, the files stay red, instead of turning blue after uploading and none of the changes I'm making on iweb are being published on the web.

It is possible that there are issues with the Apple server.
I do have a MobileMe account but I wouldn't think of publishing my own websites there, never mind a client's.
The Apple server is not known for its reliability and has a restricted bandwidth so that its not suitable for business or commercial use.
The main downside is that it has virtually zero tech support.
I publish to Host Excellence and yesterday I had to move several websites to a new account.
Tech support provided me with all the instructions. When I went to direct the domain names to the new nameservers, I was told it would take 24 to 72 hours. It took 20 minutes.
Late last night there was a side server issue with the new account. I emailed tech support and, when I woke up 4 hours later they had fixed it and put a monitor on it to make sure it doesn't happen again.
This account came with 3 free domain registrations, 15 dedicated IP addresses and unlimited everything else for less than a MobileMe subscription.
With this type of account I can publish 18 different websites without resorting to sub sites, use custom forms, mail forward, redirects, autoresponders and bulk mail. I can run all kinds of scripts and a data base and even build a web store front if I want.
MobileMe was designed with small personal websites in mind and only allows one domain name forwarded using Cname. Any others have to use masking which is absolutely useless for SEO.
If you are really stuck and the site doesn't use hit counter, blog & photo comments etc, you can try uploading it by drag and drop to Finder/Go/iDisk/My iDisk/Web/Sites.

Ctrl+Tab doesnt work with this website

I can't switch between tabs whenever i open the website http://www.chess.com/play/computer.html
May be because it uses some java app.
what do i do?plz suggest

If you see a dotted outline around the chessboard and moves list area, then the Java applet will capture all keystrokes. To send keystrokes to Firefox, you would need to click away from that area so some other part of the page is active. I'm not aware of any magical keystrokes to work around that.

Audio not working when published

When I record an audio clip within Captivate, although I can
hear it when previewing that one slide, I can't hear it when
previewing multiple slides or viewing the published movie. I know
it has nothing to do with push-buttons or other elements on the
slide (I've tried recording on blank slides, with the same result).
I've also tried exporting the audio files and listening to
them in Windows Media Player, and they work just fine (both the
.wav and .mp3 versions). This problem just started happening today.
For the last several months I've recorded tons of audio on several
different movies with no problems, but now it's not working.
I'm even worried that this issue is somehow corrupting some
of my CP files. Even after I delete all of the audio clips from the
slides they were on, and saving the CP file to a different name (it
contains 30 slides and is about 2MB), when I view the Bandwidth
Analysis, the Video size for Slide 1 shows 546KB, even though Slide
1 contains very minor things (an image and a text caption)--the
same kinds of elements as on every other slide, all of which have a
Video size of approximately 20KB.
So I inserted a blank slide after Slide 1 and copied the
elements (an image and a text caption) from Slide 1 to the new
slide, then viewed the Bandwidth Analysis again, and the new slide
was only 20KB or so, much smaller than the original Slide 1. But
then when I deleted the original Slide 1, the new slide I created
suddenly takes on the same huge Video size in the Bandwidth
Analysis as the previous Slide 1.
Bottom line--I can no longer publish any audio in about 1/2
of my Captivate movies. Can anyone please help?

Teri, do this for me, if you would, please:
Check "
Movie > Preferences > Preferences tab > (check)
"Include Audio When Movie Is Generated".
Did that help?
To Everyone Monitoring This Thread: Another easily
overlooked troublemaker is the "Audio" icon (tiny speaker) located
beneath the timeline when you are viewing a single slide
(duh - sorry, brain fart - of course that's when yo see it because
the timeline isn't visible until you go to Edit mode - double duh).
Anyway, if you click it, you will turn audio off for
all single-slide previews - note ... I said ONLY previews of
the currently open slide. This will NOT affect other previews, nor
will it affect audio in the published product . . .
Hope this info helped some - have a good weekend!
.

Tab not working on ALV report output in Persona

In normal SAP GUI we can move the cursor position on ALV report output between different column by pressing TAB on keyboard. But in case of persona 2.00, TAB doesn't work and we have to click on each cell of the report output whatever we want to highlight. Is there any settings or SAP note we can implement to so TAB will work on persona.
Thanks,
harkamal

Hi Devendra Singh,
I think it's not possible to show all field values in another Language (Eg Thai) But it's possible if it's short Text, Long Text etc
SE63 and follow menu
Translation
ABAP Objects
Short Text / Long Text Etc..
AND
Translation
NON ABAP Objects
For that also you have to maintain it first in SE63..
[SAP Help1|http://help.sap.com/erp2005_ehp_04/helpdata/EN/77/5719d2492011d1894a0000e829fbbd/frameset.htm]
[SAP Help2|http://help.sap.com/erp2005_ehp_04/helpdata/EN/b4/54601d77f38e429ffad9e3e11c1b25/frameset.htm]
Hope it will solve your problem..
Thanks & Regards
ilesh 24x7
ilesh Nandaniya

Right Click not working in published output. ??

I'm relatively new to Captivate, and NOT a developer, so please bear with me on this.
I'm recording a training video of a basic application and have a need to use a right-click to bring up a menu. This is a requirement of the app, so I need Captivate to provide the same functionality to avoid confusing the user going through the training video. I have the Click Box options set to Right Click, and it works in the Preview. However, when I Publish the finished video, the right-click does not work - only a left-click will advance to the next slide.
I found a few threads discussing issues with the right-click, but all of them were dealing with permissions issues. I'm saving the output to my desktop (Windows XP) and am launching the HTM file to confirm the video is working properly, so I don't see how a permissions issue would come into play. ?? If it is a permissions issue, how do I fix it within Captivate so that the end user can run this from any PC/MAC, where I have no control of their permissions?
Any suggestions or tips on how to get the right-click working in the final product are greatly appreciated.
D

Hi there
The right-click function relies on JavaScript. JavaScript may also be influenced by the Flash Security Settings.
Please try what is outlined in the link and see if your right-click suddenly begins working. Also note that you don't need to adjust these settings if you are serving content from a server. You only have to worry about it if you are testing by running from your local C drive.
Cheers... Rick
Helpful and Handy Links
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcerStone Blog
Captivate eBooks

Hyperlink is not working after publishing my site!

I can fully activate my newly added page on my iweb site with no problem. I created a button and hyperlinked it to the newly created page. After I publish my site, the new button is NOT clickable. I created a new photo gallery page. I already have 1 photo page so when I clicked on that page, at the very top I am seeing a clickable link that will lead me to my newly created page. THIS IS NOT HOW I HAVE IT SET UP THOUGH! I have a button on my home page that if clicked, it will take you right to the new page! I tested it and it works! I go and publish my site and all the sudden it does NOT work!!! Anybody have a clue why this is?

Turn on DB logging and see what the syntax is that CR tries to send to the Server. You can also enable crlogger ( search for this and you'll find a KBA on how to enable or DB logging component )
First guess is the Date format is wrong, typically is the cause. try removing the date from the SQL and see if that works. Then try to add the selection formula in CR Designer and look at the SQL being generated
Can be specific because you did not mention what DB you are using.
Don

Tabs Not Working on Published Website

Similar Messages

Maybe you are looking for