Tabs Open Directly After Current Tab

I updated to Firefox 3.6.6 and before, the settings were that when I opened a link in a new tab, it would go to the end of the tab list, but now it opens the tab right after the current tab and I can't find how to change it back. I've checked the settings and I skimmed through the about:config, but still can't figure it out. It's starting to be kind of annoying.
== This happened ==
Every time Firefox opened
== I upgraded to the newest version

Look at Tab Mix Plus Options. Tools > Add-ons > Extensions, locate and click on Tab Mix Plus, click Options, in the Tab Mix Plus interface, click Events, click the Tab Opening tab, look at what you have check marked on that panel. Un-check any that you need to, restart Firefox and test.
If that does not solve the problem, reset a preference:
You can change a preference to make tabs open
(1) at the end of all open tabs, '''''or'''''
(2) immediately after the current tab.
-Type '''about:config''' in the URL bar and press the Enter key.
-If you see the warning, accept it (promise to be careful).
-Filter = browser.tabs.insertRelatedAfterCurrent
-Look at the "Value" column ('''''false'''''=open at end, '''''true'''''=open after current tab)
-Double-click that preference to change the value, if you need to
-Restart Firefox (File > Restart Firefox)
NOTE: The settings in Tab Mix Plus '''will over-ride the preference setting'''.

Similar Messages

How do I get bookmarks on the toolbar to open in the current tab, and not open in a new tab?

how do I get bookmarks on the toolbar to open in the current tab, and not open in a new tab?

Start Firefox in [[Safe Mode]] to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode
*https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

Address bar google search does not open in the current tab

When I do a address bar google search, the search window does not open in my current tab (which is usually a newly blank tab window), instead it opens in a previously opened tab window (or sometimes even a new tab), but never does the search appear in the current tab. When it does this, it ofteb replaces a web page which I can no longer view it without going backwards.
The only fix I have found is to open a new tab and go to Google's web page and search from there. But, this takes extra time and I have to remember to do this. Otherwise, I might lose web pages I wish to view.
This never used to happen until recently. I have a Mac using Lion for the past year.
Any help would be appreciated. Thanks, Anna

I appreciate your input, but I don't want the google web page to open in a new window.
Instead, I want to search using the address bar in using google to open the search in the tabbed webpage I am viewing, rather than open another tabbed webpage. When it opens in a different tab from the one I am in, it either creates a brand new tab, or more problematically, opens the search in an tabbed window which has an existing webpage I still want to access for viewing.
This is a Firefox issue. Address bar searching works as it should in Safari.

Bookmark Toolbar buttons open new tabs - how do I get them to open bookmark in current tab?

I've got the bookmark toolbar with buttons for all my bookmark links. However, when I click on one, it opens the page in a new tab. I would like those bookmark buttons to open in the current tab.

Right-click on the bookmark button. Depending on any add-ins you have, the context menu may offer you a range of options e.g. Open (in existing tab), Open in New Tab, Open in New window, etc
Try the Tab Mix Plus add-in.

I just did an update to 6.0 on Lion. Now when I re-open Safari after closing it by clicking the red button it re-opens to my home page, not all my previous tabs.. prior to the update it would re-open with all my previous tabs, which is what I want.

I just did an update to Lion 10.7.4 with Safari 6.0. Now when I re-open Safari after closing it by clicking the red button, it re-opens to just my home page, not to all my previous tabs as it did before the update. I prefer having my old tabs re-open. How can I fix this?

I've had what I think is the same problem since the most recent software update. I have Lion 10.7.4 and have updated to Safari 6.0. The most noticeable difference is that where previously I had two boxes at the top of the Safari window (one to enter URL addresses, one for Google searches), there is now only one box for both functions. I don't like that as well, but I can live with it. However, since the most recent software update my "back button" only works about 5% of the time. Most of the time it is grayed out. So I usually can't get back to previous pages using the back button. Also, when I've clicked a link that opens a new window (for instance, going through the return process at Amazon, I clicked UPS locator and it opened a new window), where in the past I would have just clicked the red button after I had the information, the UPS locator window would have closed, and I would have been back at Amazon - now if I close the UPS locator window, all Safari windows close. The Safari application doesn't close, but the Amazon window closes, I'm back to an empty screen, and I have to open a new Safari window and reenter everything. I'm using a work-around of clicking on History and selecting the description of the window I want to get back too, but that only works part of the time. In the Amazon example, that's what I did once I had the UPS info, but even though I clicked the correct window description, it took me back to the beginning of the return process & I had to reenter all the info. Of course, that info was easy to reenter, but if I'm in the middle of a complicated process, it's a big problem. I've filed a bug report; I surely hope the Apple engineers are able to fix this. I'm used to using the back button function a lot!

Musicplayer crash directly after opening

Since yesterday my musicplayer crash directly after i open it. What can i do or what's the fault?

Dyld Error Message:
Library not loaded: /Library/Frameworks/PluginManager.framework/Versions/B/PluginManager
Referenced from: /Applications/Aperture.app/Contents/MacOS/Aperture
Reason: no suitable image found.
The Final Cut installation has made your system library incompatible with Aperture. It installed a wrong PluginManager.framework.
See: Aperture 3.x: Aperture unexpectedly quits if Final Cut Express 4 is installed
Do fix this, reinstall Mt. Lion on top of your current system. Then Aperture and Final Cut both should work.
Regards
Léonie

Charm implementation: No maintenance cycle is open for the current system

Gurus,
I'm in implementation project to use charm.
I've created SDCR using charm_create, and choose transaction type subject "Development (implementation)"
After approving the change request, so that the status become "Approved", I re-open the request to set into "in development", but there's error:
"No maintenance cycle is open for the current system"
I've checked notes and search the forum but not relevant to my subject.
Please help.
Regards,

Hi Cesar,
I'm facing this issue now. I have followed Dolores blog
- The IBase is wrong: The IBase/component must represent the production system in the project landscape. RP1 is my production
- Lack of authorizations: Assign role "SAP_SOCM_ADMIN" or "SAP_CM_ADMINISTRATOR_COMP" (or equivalent) to the user who would like to approve the change request. I have updated all roles and given the users SAP_ALL
- Project is locked in table /TMWFLOW/PROJMAP: If an error is detected during the processing, then the project might be locked in this table. The customer can unlock it by pressing the refresh button under tab "System Landscape" -> "Change Requests". If there are other error messages shown during the refresh process, the customer must fix those errors beforehand. Refreshed it many times without errors
I'm on the latest level of Solman 7.1 SP8, I have implemented all the new notes as well.
I have attached a screenshot
To me it seems like a bug, but haven't found anything on marketplace. Any help is much appreciated.
Cheers
Jimmy

Open URL in current browser window

I'm developing an application that works side-by-side with the user's default web browser. The browser communicates with the app through a proxy, and that works great. The issue I'm having is going the other way. So far, I've only been successful opening a new browser window each time. However, it would be much better to be able to open a page in the current window/tab. I mainly want this to work with Firefox (or anything other than IE). Has anyone ever done this, and is this even possible with Java?
Thanks in advance.

Desktop.getDesktop().browse() is what I'm using currently. I don't think you understood my problem. Currently it is opening in a new browser window. In Firefox, it's opening in a new tab, since I have it set to open in a new tab instead of new window. But, what I want it to do is open in the CURRENT tab. In other words, navigate from the current page to a new page, just as if the user had typed in an address into the address bar and pressed enter, or just as if he had clicked a standard link on the webpage.

RAW files open directly into Photoshop

Odd issue here: when launching RAW files they open directly into Photoshop. Either Camera Raw gets bypassed or it just processes them on the fly.
This happens after a bit of usage, re-launching Photoshop solves the problem for the next few files.
This happens if I launch the RAW files from the Finder, Bridge or Photomechanic. Only the right-click on my mouse in Bridge will show the option of opening images in Camera Raw.
This is driving us nuts here. Happens on 4 work stations.
RAW files are mostly CR2's. Mac OS 10.4.10

Are you using PhotoKit or PhotoKit Sharpener? If so, this is a known issue with the previous builds...go to the CS3 Beta page and redownload the current builds.
http://www.pixelgenius.com/CS3BETA.html
If you AREN'T usinf PhotoKit or Sharpener, try resetting your Bridge preferences and purging the cache.

Prevent uploading files to open directly in Lightroom 5

When I upload image files to my computer hardrive, they open directly into Lightroom 5. How can i prevent this?
Jean-Paul

Lightroom Preferences> General tab> Import options> make sure "Show import dialog when a memory card is detected" is not selected.

Do I not get the "open file after publishing" checkbox with the trial version?

I owned the Adobe Acrobat 8 Professional version on my pc, and recently bought a Mac. Do I not have the option to "Open file after publishing" checkbox with the trial version? Do I have to repurchase the whole program to get that?

uninstall.
download from prodesigntools.com.
if you follow all 7 steps you can directly download a trial here: New Adobe Lightroom 6 (CC) Direct Download Links – Free Trials | ProDesignTools
and activate with your serial number.
if you have a problem starting the download, you didn't follow all 7 steps, or your browser does not accept cookies.
the most common problem is caused by failing to meticulously follow steps 1,2 and/or 3 (which adds a cookie to your system enabling you to download the correct version from adobe.com).
failure to obtain that cookie results in an error page being displayed after clicking a link on prodesigntools.com or initiates the download of an incorrect (eg, current) version.

Firefox is saving my open webpages after closing suddenly

I have been using Firefox for a while, and recently noticed this new feature that is causing problems. Firefox is saving my open webpages after closing suddenly, and then when restarted tries to open the same webpages. Huge problem: If it's a site with a virus it goes right back to that site. Huge problem for me- viruses must love this feature. I just want my regular homepages to open if Firebox closes suddenly. Help.

This can be a problem with the file [http://kb.mozillazine.org/sessionstore.js sessionstore.js] and sessionstore.bak in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Profile Folder]
Delete the files sessionstore.js and sessionstore.bak and any existing files sessionstore-##.js with a number in the left part of the name like sessionstore-1.js .
Session restore works more reliable if you choose Tools > Options > General > Startup: "When Firefox Starts": "Show my windows and tabs from last time"
See http://kb.mozillazine.org/Session_Restore
Other things that need attention: 
Your above posted system details show outdated plugin(s) with known security and stability risks that you should update.
*Next Generation Java Plug-in 1.6.0_14 for Mozilla browsers
Update the [[Java]] plugin to the latest version.
*http://java.sun.com/javase/downloads/index.jsp (Java Platform: Download JRE)

I can't open safari after downloading yosimite

Help I can't open safari after downloading Yosimite

Remove Genieo manually:
http://support.apple.com/en-us/HT203987
First follow these steps to stop the Genieo or InstallMac processes, if they're running. Be particularly careful to restart your Mac when instructed.
Open the Activity Monitor app:
You can use Spotlight (Command-Space) to search for "Activity Monitor," then choose Activity Monitor from the search results.
In the Activity Monitor window, click the CPU tab, then click Process Name at the top of that column to sort the list alphabetically.
Look for the process "Genieo." Select it, then click the Force Quit button in the upper-left corner of the window.
Look for the process "InstallMac." Select it, then click the Force Quit button.
Quit Activity Monitor.
From the Finder, choose Go > Go to Folder.
Type /private/etc/launchd.conf in the text field, then press Return.
If the file is on your Mac, a window opens with the file you searched for already selected. Drag the file to the Trash.
Restart your Mac, then continue to the next steps, below.Remove the files related to Genieo:
Select each item in the list below, starting with /Applications/Genieo.
Choose Edit > Copy.
From the Finder, choose Go > Go to Folder.
Choose Edit > Paste to paste the line you copied into the text field, then press Return.
If the file is on your Mac, a window opens with the file you searched for already selected. Drag the file to the Trash.
Repeat the steps above for each item in the following list. If you get a message that the folder can't be found, continue to the next item in the list./Applications/Genieo
/Applications/InstallMac/Applications/Uninstall Genieo
/Applications/Uninstall IM Completer.app~/Library/LaunchAgents/com.genieo.completer.download.plist
~/Library/LaunchAgents/com.genieo.completer.update.plist/Library/LaunchAgents/com.genieoinnovation.macextension.plist
/Library/LaunchAgents/com.genieoinnovation.macextension.client.plist/Library/LaunchAgents/com.genieo.engine.plist
/Library/LaunchAgents/com.genieo.completer.update.plist~/Library/LaunchAgents/com.genieo.completer.ltvbit.plist
/Library/LaunchDaemons/com.genieoinnovation.macextension.client.plist/Library/PrivilegedHelperTools/com.genieoinnovation.macextension.client
/usr/lib/libgenkit.dylib/usr/lib/libgenkitsa.dylib
/usr/lib/libimckit.dylib/usr/lib/libimckitsa.dylib
~/Library/Preferences/com.apple.genieo.global.settings.plist~/Library/SavedState/com.genieo.RemoveGenieoMac.savedState
Now do the same for each folder in the following list. When these folders open, no file will be selected. Instead, select all items (Command-A) in the folder and drag them all to the Trash.~/Library/Application Support/Genieo/
~/Library/Application Support/com.genieoinnovation.Installer/~/Library/Saved Application State/com.genieo.RemoveGenieoMac.savedState/
Restart your Mac, then continue to the next steps, below.
From the Finder, choose Go > Go to Folder.
Type /Library/Frameworks/GenieoExtra.framework in the text field, then press Return.
If the file is on your Mac, a window opens with the file you searched for already selected. Drag the file to the Trash.
Restart your Mac, then choose Finder > Empty Trash to permanently remove the files.

Cannot open mail after upgrading to leopard

I cannot open mail after I upgraded to leopard. I keep getting this message that "mail has unexpectadly quit. I have sent reports to apple. Does anyone have any suggestions?

5.1.4 will solve the compatibility issue, however, it is no longer available from Apple -you would have to find a copy on Ebay or similar. The current version is FCP 6 -part of Final Cut Studio 2.
Going back to Tiger will also solve it and will not cost anything, apart from the time spent reinstalling.
Unless there is some feature in Mac OS X 10.5 that you really need, this would be the easiest way to get FCP running again.

Can't open iPhoto after fresh OSX install

I recently re-installed my operating system (on the advice of a Guru) and now I cannot open iPhoto. I moved all my documents, applications, photos (EVERYTHING) to an external hard drive and then re-installed.
Once installed I tried to open iPhoto and received this message:
"You can't open your current photo library using this version of iPhoto.
You have made changes to your photo library using a newer version of iPhoto. Please quit and use the latest version of iPhoto."
So I then proceeded to download updates. I am running version 4.0.3. When I tried the version 5 upgrade it said there were no valid versions of iPhoto in my applications folder. Version 6 upgrade says the same.
Any ideas on what I can do. I can't even load new photos (photos not changed in a newer version of iPhoto). I'm at my whits end.
Anybody PLEASE help!!!!
Thanks,
Matt

Hi, Matthew. The error message you're seeing appears whenever iPhoto 4.x detects an iPhoto Library folder anywhere within its reach that was created by iPhoto 5.x or 6.x. Is it possible that the hard drive on which you backed up all your stuff also contained a library folder created by iP 5 or 6, and you copied that folder to your main drive along with the data that had been on it previously?
Alternatively, is it possible that someone has given you a picture CD burned with iP 5 or 6, and that that CD is in your optical drive now, or that you copied it to your main hard drive before backing up, but never tried to open iPhoto after doing so? iP (any version) creates an iP Library folder when you burn a CD, and the mere availability of such a folder to an older version of iP will trigger the error message, even if an appropriate Library folder is also available.
Or might you have backed up your data, including your original iP Library folder, to a drive that contained a newer version of iPhoto, and opened the library in that version while it was backed up on that drive? That would have caused the library to be updated, which would make it (and any copy of it) unreadable by iP 4.x.
Search your hard drive (the one with the newly-installed OS on it) for folders named "iPhoto Library". If you find any besides your main library, and you're confident that your main library couldn't have been updated by a newer iP version, you'll need to remove any newer-version libraries from the hard drive or disconnect (or eject) any storage medium that contains them, so iP 4 won't detect them and put up the error message.

Tabs Open Directly After Current Tab

Similar Messages

Maybe you are looking for