Tabs will not open automatically (link appears but I have to manually hit "enter" or reload the tab).

When I recently updated Firefox, my tabs stopped working. When I right-click on a link and select "open new tab," the tab opens with the link in the address bar, but the page is blank. Only when I switch to the new tab, put my cursor on the address bar, highlight the entire address and hit "enter" does the page finally load. I've tried to look for answers in the forums and have played around with the tabbing options, but I cannot resolve the problem. Any suggestions would be appreciated!

This issue can be caused by an extension that isn't working properly.
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
* Don't make any changes on the Safe mode start window.
* https://support.mozilla.com/kb/Safe+Mode
If it does work in Safe-mode then disable all extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
* Use "Disable all add-ons" on the [[Safe mode]] start window to disable all extensions.
* Close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit")
In Firefox 4 you can use one of these to start in <u>[[Safe mode]]</u>:
* Help > Restart with Add-ons Disabled
* Hold down the Shift key while double clicking the Firefox desktop shortcut (Windows)
* https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

Similar Messages

  • I downloaded the Adobe free trial to convert a PDF to Word and it will not open.  Further, even though I have signed in, it reverts back to the sign in page over and over and over again.  How do I to convert?

    I downloaded the Adobe free trial to convert a PDF to Word and it will not open.  Further, even though I have signed in, it reverts back to the sign in page over and over and over again.  How do I convert?

    Moving this discussion to the Adobe CreatePDF forum.

  • Additional tab will not open for links

    previously i have been able to click on a link, and the link would open in a new window or tab. but now whenever i try to open a link through a website, it will not open the link in a new window or new tab. how can i fix this?

    Hi ArletteGH, I'm not sure which one of these is the better description of your issue:
    If you Ctrl+click or middle-click a link:
    * Firefox creates a new tab, loads the link in that tab, but the tab stays in the background rather than being made active (default behavior)
    * Firefox creates a new tab, but doesn't actually fetch the page until you make the tab active
    * Firefox creates a new tab, but the tab and address bar stay blank, as though the address never got transferred to the page
    Are any of those close to describing your problem?

  • HT4623 My Iphone 4 has locked me out. Can see my homescreen but the slide will not open to keypad to unlock. Sometimes I can hit enough things where the keypad will show up but the password will not go in unless I hit each number twice. Strange boxes on s

    My Iphone 4 has locked me out. Homescreen will show up but cannot get slider to open keypad. SOmetimes if I tap enough things the key pad will display. When I enter the passcode it will not register. If I hit each passcode number twice it will register but then tells me I have the wrong code. I also have boxes and rectangles that appear to highlight items which never used to come up. Anyone have any experience with something like this?

    Wow! Its impressive for you to load iOS 4.2 onto the iPhone 4S. How did you do that?
    Moving along, press and hold both the power button and home button together for about 10 seconds. Then, press the power putton to turn it back on.

  • I want my tabs to not open automatically and even though i have set to do that it still opens it automatically, i've tried all solutions that were provided nothing helps.

    i have the "when i open a new link in a tab, switch to it immediately" option unchecked. it still opens them when i open a new link. i found someone who was having the same problem but the solution to his problem did not help me. i have restored my prefrences, disabled all addons and plugins. nothing worked
    == User Agent ==
    Mozilla/5.0 (Windows; U; Windows NT 6.1; en-US; rv:1.9.2.3) Gecko/20100401 Firefox/3.6.3

    Hello Trey.
    I believe your issue comes from a slight misunderstanding... It's not your fault, of course, Firefox should be clearer in this aspect, but I should be able to clear the misunderstanding and make sure you know what's going on.
    The "when i open a link in a new tab, switch to it immediately" option only applies to tabs open deliberately in a new a tab. For example, when you middle-click (click your mouse's scroll wheel) a link (or use the appropriate contextual menu entry). It doesn't apply to links that are set by the site to open in a new tab. This is normal standard behavior, and isn't likely to change any time soon, but there are multiple things you can do so it doesn't bother you.
    For example, you can middle-click (or use the appropriate contextual menu entry) the links you want to open on a new tab, instead of right-clicking them and have them open in a new tab only if the site has instructed your browser to do so. You can also go into ''Tools > Options > Tabs > Open links that open in a new window in:'' and select "Current tab", so the links that are instructed by the website to open in a new window/tab, are open in the same tab, and so you have complete control of where each link opens. This setting, however, is known to cause some trouble in some websites that are pop-up-heavy, so use this with caution.
    I hope this helps.

  • I dl'd Firefox 4, was working great but, Firefox 4 is unable to work w/ Netflix. I hit the Netflix restart in 32-bit mode and now Firefox 4 will not open on my MacPro. I have to "Force Quit". What's the problem?

    I dl'd Firefox 4 on wide release Tuesday. It was working just fine on all news sites I use. Then, I tried to use my Netflix streaming. Netflix alerted me FF4 needed to run in 32-bit mode due to its movie player plug-in. I hit the Netflix restart in 32-bit button, FF4 crashed. I've since re-dl'd FF4 and loaded it into the Apps folder on my MacPro(Mac OS 1.6.7/2.66 Quad-core/2 GB RAM/256MB GPU). It still won't open and I have to "Force Quit". Several "Reports" have been sent to Apple but, I don't think Apple is the problem. As it now stands, I can only run last version of FF on my MacPro.
    I also have a MacBook(Mac OS 10.6.7/2.16 C2D/1 GB RAM/64 MB GPU) and I am able to have 2 versions of FF on that Mac. I even have the newest version labeled as Firefox4, so as to distinguish between the 2 for the purpose of using FF4 for everything but Netflix. So, what happened? What's the difference? Why won't FF4 run on my MacPro anymore?

    If this were just a Netflix problem, why can I access Netflix through Internet Explorer and not through Firefox? I've been using Firefox to access Netflix for at least the past year and starting yesterday (12/6/11) Firefox doesn't seem to recognize that Netflix exists. I've tried the suggested Firefox "help" which was of no help whatsoever and may even have made life more difficult in accessing other accounts. Anyone know how to contact Netflix or Firefox by phone?

  • When I attempt to open a new tab by clicking the "new tab" button on the tabs bar, the tab will not open. Can this be fixed and how?

    When I open my Firefox browser, the normal 1 tab comes up. But when I attempt to open new tabs with the "new tabs" button, a new tab will not open. I have also tried right-clicking on the tabs toolbar but tabs will not open. The only way I can get a new tab to open is by right-clicking on a link and selecting the "open new tab" option in the right-click menu.

    The Ask Toolbar is causing that in the Firefox 3.6.13 version. Disable that extension or un-install it.

  • Content tab will not open

    When trying to manage my pop-ups under the Content tab I'm finding that the tab will not open. All the other tabs will open, but when clicking Content, the previous tab's info stays on the screen and the Content tab's info (Pop-Up Blocker, etc) doesn't appear.

    Do you have that problem when running in the Firefox SafeMode?
    [http://support.mozilla.com/en-US/kb/Safe+Mode]
    ''Don't select anything right now, just use "Continue in SafeMode."''
    If not, see this:
    [http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes]

  • My reader will not open a PDF file that I have downloaded from a government web site (an application form) - it states that the file is not good.  I can open on the web site but not from my mac computer

    My reader will not open a PDF file that I have downloaded from a government web site (an application form) - it states that the file is not good.  I can open on the web site but not from my mac computer.

    Maybe this: http://helpx.adobe.com/acrobat/kb/pdf-error-1015-11001-update.html ?
    Do you have a link to that document?

  • When I click on the "+" to the right of the last open tab on the tab bar, a new tab will not open. Help, Thanks, Jim

    When I click on the "+" to the right of the last open tab on the tab bar, a new tab will not open. Help, Thanks, Jim

    Well, it is showing as being install in the version of Firefox that you posted here with.
    Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; rv:1.9.2.21) Gecko/20110830 '''AskTb'''AD3/3.12.2.16749 Firefox/3.6.21
    ''''' "and whenever I click on a bookmark, it opens in a new tab automatically" '''''
    Probably caused by an extension, or a couple of extensions that are in conflict with each other. <br />
    http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes

  • Mozilla v18 tab will not open with any controls how do I fix

    my tab will not open a new tab when i use any of the open tab functions (file open tab, ctrl +t, or just he + sign on the tab line. I do not have any of the ask toolbars installed. I alos woul like to kow about the pin and tab functions that I read about in the foum but I don't have those eigher.
    I have windows 7 home premium
    Installed Memory 8 GB 7.89 GB usable
    64 bit operating system

    Maybe you should reset all preferences as there seem to be a lot that have been modified (e.g. network.http and plugin.expose_full_path should have the default value). If you haven't changed them yourself and don't know what they are about then you should leave them at the default.
    You can delete the prefs.js file and possible numbered prefs-##.js files and a possible user.js file to reset all prefs to the default values.
    *http://kb.mozillazine.org/Resetting_preferences
    *http://kb.mozillazine.org/Preferences_not_saved

  • H8-1237c will not open web links/connection issues.

    Hello,
    I have a new HP H8-1237c with Windows 7 64bit.  Verizon dsl with a Westell Versalink 327 modem and an Apple Airport Extreme.
    Internet Explorer 9 will open the standard homepage, but will not open any links, or will sporadically open a few.  It will connect to google.com when I type that in the address bar, but not when I try to click on any search results.  
    Verizon tech support had me reset IE9 and it got hung up.  We restated the system in safe mode with networking and were able to ping google with good results.  Most links opened.
    Upon restarting the system in standard mode, the links are not working again,  He suggested HP support.
    I have not had any previous problems.  My laptop and ipads/touchpad all connect normally. 
    Suggestions?  Thanks in advance.

    Mazz520, welcome to the forum.
    I suggest trying Firefox or Chrome to see if either of them works properly.  If they do, it is a problem with IE9 settings.  If they don't, it is most likely your ISP/Network settings.
    Please click "Accept as Solution" if your problem is solved.
    Signature:
    HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
    HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
    HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
    HP Photosmart 7520 AIO
    ++++++++++++++++++
    **Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
    Intelligence is God given; Wisdom is the sum of our mistakes!
    I am not an HP employee.

  • I have a 1st generation MacBook Pro and I recently downloaded OS X Maverick.  My iTunes will not open because it says i need a 64 bit version.  Already followed the promted instructions but no luck.  Any suggestions??

    I have a 1st generation MacBook Pro and I recently downloaded OS X Maverick.  My iTunes will not open because it says i need a 64 bit version.  Already followed the promted instructions but no luck.  Any suggestions??

    Oh, you do have the C2D! That's great!
    I'm no technical expert, I just like to help out whenever or wherever I can so... I don't know if this can help you, but let me tell you about how I got my Snow Leopard to run in 64 bit mode. When I got my (late 2008) iMac it was running in 32 bit mode under Tiger (2.4 GHz/Core 2 Duo). I eventually upgraded to Snow Leopard & it was running in 32 bit mode (by default) w/1 GB RAM.  
    Somewhere along the line, I happened to watch a YouTube Video that showed how to upgrade an iMac's RAM, so I ordered two - 2GB sticks of Crucial RAM and then - under the guidance of the 14 or 15 year-old young man who posted the video on YouTube; wearing a rather fashionable static-electricity-neutralizer-wrist-strap, I removed 1GB of RAM & plugged in the 4GBs of RAM. So - boom like that, it was like I bought a brand new machine.
    It was over a year later when I stumbled across a way to boot Snow Leopard into 64 bit mode. Turns out that if you boot while holding down the 6 & 4 key combo (the ones above the QWERTY keys), then the machine runs in 64 bit mode. Go figure. Now my Snow Leopard and just about all of my applications - with the ironic exception of iTunes - runs in 64 bit. iTunes seems fine though; if there's a performance bottleneck, I really can't tell.
    Well, that's about it..
    I hope that something I've mentioned can help you achieve your overall goal.
    Finally, it's hard to jump onto a train, a large cat, or a surfboard that's already moving. But don't be surprised when someone a fraction of your age shows you how to.
    Best Regards,
    mm~

  • I just installed CC Lr 5.5 and it will not open on my laptop but works fine on my desktop.

    I just installed CC Lr 5.5 and it will not open on my laptop, but works fine on my desktop.

    Try this:
    https://helpx.adobe.com/lightroom/kb/unable-launch-lightroom-55.html

  • When I click on the new tab button, a new tab does not open or when I go to file new tab a new tab will not open either.

    When I click on the new tab button, a new tab does not open or when I go to file new tab a new tab will not open either.

    Un-install the '''''Ask Toolbar''''' until Ask fixes the problem caused by their toolbar.
    *http://support.mozilla.com/en-US/kb/Uninstalling+add-ons
    *http://support.mozilla.com/en-US/kb/Cannot%20uninstall%20an%20add-on

Maybe you are looking for

  • Incorrect PO price vs. tax requirement in Poland

    Please advice how to handle situations in SAP, where the Purchase Order price is incorrect at the time of Goods Receipt. 1.     Legal tax requirement: invoice quantity and value must match There are situations when the Buyer enters an incorrect price

  • Can Garageband be updated to include MIDI out

      Such a user freindly app. for us MIDI newbs. And great for on the go sketching ideas out even for the more priofficient. Unfortunatley NO MIDI OUT. What were they thinking? Such wasted potential. Was this an oversight?? Part of an evil conspiracy?

  • Can't match error calc. of rms noise error in NI meas. encyc.

    I get the 1 sigma STD based on Lafrance, "Fund Concepts in Comm. as sigma/ = [{2N (0.5kT)^2}^1/2]/0.5NkT where N = 2BW or = 1/(BW)^0.5 and whereas the meas. encycl. result is 1/[2(BW)^0.5] for a 2 sigma error. Can you help? wouldn't I need 4 1 sec me

  • Printer page size problems

    I have an HP 1180C Deskjet which is set up with A3 paper as the default size. All programs recognise this apart from Adobe Reader which resets it somehow to A4 size. So whenever I receive a pdf that is A3 size I have to go into printer properties and

  • Open IPv6 ports on router IOS

    I have two 2811 routers with open ports that I am told to close. Both routers are running the same IOS version. flash:c2800nm-advipservicesk9-mz.124-25d.bin. These are Internet facing routers and thus we do not run IPv6 on these rotuers (yet). My que