Tabstrip control can not switch (Do not respond when focus on field of subscreen)

Hi Colleagues,
     I have met with a very strange question, which worries me a lot these days. Would you please help me with it?
     The problem is like this:
     1. In normal case, I can switch to another tab when I click it. Please see picture in the attachment (Tabstrip1.png)
     2. But when I click on field on the subscreen of one tab, set focus on one field, in the picture of attachment switch2.png, I can not switch to another tab, it just does not respond. I really do not know why this happens.
     Could any colleague give an answer or hint about it? Thanks a lot!!
     You can access the program by TCODE: EPIC_RPR on EBJ client 003 or QI3 system client700 .
BR,
Chris

yea thats what i thought, thats the most sensible answer that they expect you to
know it.
but... have you taken any of the them? would love to hear from someone thats taken a few, i wasn't even sure if i'd put this post in the right forum to be honest.
just seems odd why they say 95% of the material is in the prep stuff seems too easy.
i'd have thought that since the cs4 exam had that many more questions that the cs5 exam would have even more prep material but obviously not so.

Similar Messages

  • My iphone 4s has switched off and will not switch back on even when its connected to power charger or laptop. can someone help please

    My iphone 4s has switched off and will not switch back on even when its connected to power charger or laptop. can someone help please

    Just read that someone had the same problem on 3gs and someone had replied to press the home button and power button at same time, so I tried this and within a few seconds my phone had switched itself back on.

  • My IPOD Touch initially had a white screen.  I tried correcting this by restoring default settings via ITunes.  The Restore Failed with error 1602 and now the IPOD touch is completely dead. It will not power on or respond when I plug it into my PC via USB

    My IPOD Touch initially had a white screen.  I tried correcting this by restoring default settings via ITunes.  The Restore Failed with error 1602 and now the IPOD touch is completely dead. It will not power on or respond when I plug it into my PC via USB.  I get an error on my PC stating that device attached to USB port is not recognizable.  Can anyone help?

    Error 1602: Try the following steps to resolve this error:
    Ensure proper USB isolation troubleshooting has been performed, and test with a known-good cable.
    Follow the steps listed for Error 1604.
    This error may be resolved by disabling, deactivating, or uninstalling third-party security, antivirus, and firewall software. See steps in this article for details on troubleshooting security software.
    Above from:
    http://support.apple.com/kb/TS3694

  • My IPhone 4S is hanged during updating IOS 6 to IOS 8, PHONE was connected WIFI and under charging with computor. Kindly help, it is not switching off, not restarting

    My IPhone 4S is hanged during updating IOS 6 to IOS 8, PHONE was connected WIFI and under charging with computor. Kindly help, it is not switching off, not restarting

    Hi HARISH INDIA,
    That is not good but lets see if we can get it back to life. If you can, see if you can put your iPhone into recovery mode and then use iTunes to restore it. If you can get it to restore, it will erase everything off your iPhone. If you have a back up in iTunes or iCloud then you can put that on after the restore is complete. Take a look at the article below for more information. 
    If you can't update or restore your iPhone, iPad, or iPod touch
    http://support.apple.com/en-us/HT201263
    Take it easy,
    -Norm G. 

  • MacBook Pro late 2011 not switching to ATI graphics when running off mains power.

    Hi there.
    My MacBook Pro late 2011 doesn't appear to be switching to ATI graphics when running off mains power. It always seems to stay on the Intel adapter instead. I've checked the option in the energy saver settings and it's ticked to "Automatically switch..." and when I untick this box, it switches to ATI and stays that way even when running on battery (as expected). Either way it will not switch to ATI graphics when plugged into mains unless forced to in this way.
    Any one else seen this? Very frustrating when trying to run an external monitor with the Intel adapter!
    Thanks in advance.
    Dan

    "As a last resort I opened the bottom cover and disconnected the battery power plug (MagSafe adapter also disconnected)."
    After everything was disconnected did you press the power button and walk away for 5 minutes? Try that, just had one restart after waiting for that long.

  • My iPhone 4s will not switch to landscape view when streaming a video on Facebook. It works on YouTube and safari, just not Facebook. Help?

    My iPhone 4s will not switch to landscape view when streaming a video on Facebook. It works on YouTube and safari, just not Facebook. Help?

    Well I deleted the Facebook app and reinstalled the latest version to try to correct the issue and it still didnt work. I had changed a bunch of settings earlier to try and fix it and it worked for the video to be landscape but as soon as I closed out of the app and re-opened it then it quit working.

  • Have upgraded to IOS 7 now my phone will not switch to cellular data when not connected to WiFi.

    phone will not switch to cellular data since upgrading to IOS 7. Have checked setting and everything is set to use data.

    Hello berkshireds,
    I would be concerned too if my iPhone only connecting to the Internet when connected to Wi-Fi. I recommend following the steps in the following article to assist with your cellular data connection:
    iPhone: Troubleshooting a cellular data connection
    http://support.apple.com/kb/ts3780
    Thank you for posting in the Apple Supprot Communities.
    Best,
    Sheila M.

  • In running application can control can be added are not(i,.e graphs)

    hi , may I know whether any control(i.e, waveform graphs )on running application in front panel , my device is pxi system with 4461 and 4462 device with labview7.1 version in xp backround.
    i am using this in datawirting and data reading.
    looking for answer.
    with regards

    Are you wanting to know if there are any control types other than waveform controls?
    Kudos are (always) welcome for the good post. :-)

  • Bug?  Can't switch off constraint / snapping when dragging multiple points

    Can someone please check this one out:
    Summary:
    Prefs are set to: Snap Vector Tools and Transforms to Pixel Grid OFF. Constrain path dragging in the options bar is OFF.
    If I have a vector path in a document I can drag one selected point freely. If I have two or more points selected transformation is constrained/snapped to the pixel grid.
    CS6, Windows 7/64bit.
    Expected result:
    With settings as above I should be able to drag points without constraint/snapping.
    How to reproduce:
    Ensure settings are as described above.
    Draw ellipse path with the shape tool.
    Select and drag one point with the direct selection tool = free dragging
    Select and drag multiple points with the direct selection tool = constrained dragging

    Thanks for noticing this Mike,
    This may have been overlooked, but we notice that it also appears in CS5.
    We'll have a look at it.
    Thanks again
    Pete

  • I can't get ITunes to respond when I touch the screen. What can I do to get it to respond?

    I can't get ITunes store to respond

    Quit the app and restart the iPad.
    Go to the home screen first by tapping the home button. Quit/close open apps by double tapping the home button and the task bar will appear with all of you recent/open apps displayed at the bottom. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner to close the apps. Restart the iPad. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
    Or try this
    Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.

  • HT1695 i could not switch on my iphone

    my iphone was 60 percentage of battery and goes off automatically. i could not switch it on and when charging nothing appear on the screen

    my iphone was 60 percentage of battery and goes off automatically. i could not switch it on and when charging nothing appear on the screen

  • The volume up and down controls on my wireless keyboard show a no entry sign and do not respond when used...please help?

    The volume up and down controls on my wireless keyboard show a no entry sign and do not respond when used...please help?

    If you want to get a little more "exotic" you can try remapping the function keys.  I did a little google searching and the hits that looked promising are,
    Mapping volume and eject keys to 3rd-party keyboard Other Hardware
    Spark
    Spark is a powerful, and easy Shortcuts manager. With Spark you can create Hot Keys to launch applications and documents, execute AppleScript, control iTunes, and more...
    You can also export and import your Hot Keys library, or save it in HTML format to print it.
    Spark is free, so use it without moderation!

  • I can not get LabVIEW to respond to a VB6 ActiveX event

    I am working with a VB6 ActiveX dll (VBtablet.dll is a wrapper for Wintab32 for a tablet interface) using LV8.2.1 and can not get it to respond to an event.  I have opend the object and registered it for callback, but have had no luck in having an event generated.  Is there anyway to see these events generated or at least that it has been registered?  The dll has no problem working in a VB app or in Excel using a VB macro.  Is there anything special that has to be in the ActiveX object to get LabVIEW to respond to it?
    When I register the callback I use a control reference of the data being returned as my "user data" and in the callback VI I wire the event data into the "Value" of the control reference. I believe this is all I have to do.  Any ideas would be helpfull.
    Thanks,
    Paul 

    cueball wrote:
    I am able to see that events are generated from the dll, but somewhere between the ActiveX object and LabVIEW it is disconnected.  Is it possible that LabVIEW is excepting these events and not allowing then into the code.  The path as I see it is
    dll -> WinAPI -> ActiveX -> LabVIEW
    One thing this dll requires is a windows handle and I am wondering if LabVIEW itself is reads the events directly instead of ignoring them.  The reason I bring it up is that the tablet works like a mouse and I am wondering if it is absorbing these commands directly and not allowing them to be passed through the ActiveX object. Like this
    dll-> WinAPI -> LabVIEW
    therefore the event is never generated.  That is why I wish I could speak with someone at NI that could explain that process better, but it seems like there is no one at NI who knows any high level issues.
    First this are not high level issues but lowest low level issues. Some of it certainly is more Windows related than LabVIEW so support from MS, as unlikely it is to get that, would be at its place. NI people are not there nor can't really help you debug your VB issues.
    Second you say it is a tablet and works like a mouse, then I'm wondering if Windows is not simply claiming it as a Human Interface Device itself and not really letting you control it yourself in your VB control.
    Rolf Kalbermatter
    Rolf Kalbermatter
    CIT Engineering Netherlands
    a division of Test & Measurement Solutions

  • Silverlight 5 WebBrowser Control - Is the SL5 WebBrowser control is set to work in IE7 mode only? I have a 3rd party web site i'm hosting and now they will not work with IE 7 Compatibility mode. Looks like this control can't detect I'm setup for IE 9.

    Silverlight 5 WebBrowser Control - Is the SL5 WebBrowser control is set to work in IE7 mode only? I have a 3rd party web site I'm hosting and now they will not work with IE 7 Compatibility mode. Looks like this control can't detect I'm setup for IE 9. I'm
    running IE 11 with registry hack for IE 9. I think the SL5 webbrowser control is set to work only in IE 7. can some one verify this or tell me how to set the WebBrowser control up to run either IE8, 9, 10 or 11? I have same issue with machines running IE 8
    and above. This Silverlight 5 application is running out of browser with the elevated privileges (hack) and at test certificates install in proper stores. This application has been running for 2.5 years. Vender switch on some changes a couple days ago that
    broke this application. Help!!

    Hi,
    It seems there is nothing to do with IE mode.
    Please make sure your link still can be accessed.
    The WebBrowser displays HTML content in applications running in a Silverlight 4 or later out-of-browser applications or in Silverlight 5 in-browser trusted applications only.
    For more infromation,please check link below:
    http://msdn.microsoft.com/en-us/library/system.windows.controls.webbrowser(v=vs.95).aspx
    Best Regards,
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • Mission Control: Application Does Not Switch To Assigned Desktop Once Open

    I have Adobe Photoshop CS5 assigned to DESKTOP 2 in Mission Control. If Photoshop is closed, and I launch it from the dock or Launchpad, Lion switches to DESKTOP 2 to launch Photoshop. This is what I want.
    However, if Photoshop is already open and I click on an image file in Adobe Bridge, or Finder, Lion does not switch to DESKTOP 2. Photoshop will launch on whatever desktop I am on, in front of Finder or Adobe Bridge.
    I have experienced this when I have "Automatically rearrange spaces based on most recent use" and "When switching to an application, switch to a desktop with open windows for this application" on or off. Both settings seem to have the same problem.
    Is anyone else experiencing this? Any suggestions? I used this feature extensively with Spaces, and Lion is killing my workflow unless I can get this figured out.
    Thanks!!

    Wait DONT reinstall yet!!! there is a switch for this:
    I bet yours is toggled the wrong way.
    Message was edited by: coocooforcocoapuffs: never mind, did not read your post properly.

Maybe you are looking for