TABULAR BLOCK WITH PICTURES BELOW IN REPORTS 10G

I have a requirement to create a tablular report that usually holds 4 to 5 line items. Each line item has a picture that i must put at the bottom of the tabular block and the pictures need to be horizontal as they correspond to the items in the tab block. i have been trying to create two queries then link them, then create two Report Blocks, but the second block always says it's below the group level. any thoughts?
thank you,
steven

I have had this sort of problem before and I have just had to play around with the sizes of my margins and repeating frames and the elasticities until I finally get it to work the way I want. I think for your case I would start by setting the Main margin the same size as the page then leave the horizontal elasticity set to Fixed and the Vertical to Expand. Then for my main Repeating Frame I think I would set it up the exact same way as the Main margin but change the Page Break After property to Yes and leave the Page Break Before to No. Then for any additional repeating frames within that repeating frame I would try to set the width in such a way that I could leave it as Fixed and set the Vertical Elasticity to expand so that it only grows if I couldn't leave it as fixed. For those additional repeating frames I would leave the Page Breaks set to No for Before and After. If that doesn't work... you will probably just have to mess with the properties until it does. Oracle Reports is a nasty little bugger that is very tempermental as you are probably aware of.

Similar Messages

  • ORARRP Problem with Oracle Forms and Reports 10g

    hi,
    i have a problem with orarrp utility. the printeroutput is sometimes mirrored or only a blank sheet. is this a known problem? are there any workaraounds available? what can i do to fix the problem? please help me.
    thanks very much
    gunnar kieck

    Hi Rajesh,
    But i have not installed IAS at all. I have only Forms and Reports 10g and Oracle database installed. As you said it only save on IAS, but can we save it on local machine. Is there any other alternative.
    Again my second issues is --> I want to remove Mail option and rename Cache option to PDF from Destype combo box which appears at run time.
    Any idea how we can do this?

  • Cofiguring & sending email with attachment from Oracle Report 10g

    I want to run report from Oracle 10g reports to be sent as email attachement to differnt people with their respective personal content.
    The first problem is to know how to configure Oracle reports 10g to be able to send output to email address.
    The second problem is to be able to route seperate pages of the report to seperate email address.
    Thanks to all.

    For configuring email for reports
    http://download-east.oracle.com/docs/cd/B14099_17/bi.1012/b14048/pbr_conf.htm#sthref472
    For sending the output to different mail id's you can use bursting and distribution feature of Oracle Reports. For details,
    http://download-east.oracle.com/docs/cd/B14099_17/bi.1012/b14048/pbr_dist.htm#i1007338

  • Tabular Block with list item

    I have tabular block (4 items) in this block and created a list item on top of this tabular.
    I insert first record and select an item from list item
    but when I go to 2nd record then list item value go back on this default item.
    there is possibility that when I enter 1st record and select item from item list
    this item (from list) is my default item in each row.

    No.
    Sr#     Item1          Item2          item3          list ( all database items)
    1     abc          abc          abc          xyz
    2     abc          bbc          ccd          
    now see list item this is a item list and having 3 list in item
    1. abc
    2. xyz
    3. bbc
    in first row I post record and select xyz from list item
    in 2nd row i want that xyz will be the default value of all rows in list item.
    null

  • Problem with cgicmd.dat in reports 10g

    Dear Sir/Mam,
    I've configured report serve on solaris 10. When executing reports using web url with key map given in cgicmd.dat file, I'm getting a very strange problem. Whatever parameters m passing to the reports through web url an additional "=" character is appended automatically. I'm giving details of the files below. Please help me out. Thanks in advance.
    Content of rwservlet.properties:-
    SERVER_IN_PROCESS=YES
    RELOAD_KEYMAP=YES
    DIAGNOSTIC=YES
    TRACEOPTS=TRACE_ALL
    TRACEFILE=rwservlet.trc
    TRACEMODE=TRACE_REPLACE
    SERVER=test
    #IMAGEURL=http://<web_server_name>:<port_num>/reports/rwservlet
    KEYMAPFILE=cgicmd.dat
    #DBAUTH=RWDBAUTH.HTM
    #SYSAUTH=RWSYSAUTH.HTM
    #ERRORTEMPLATE=RWERROR.HTM
    #COOKIEEXPIRE=30
    ENCRYPTIONKEY=reports9i
    #DIAGBODYTAGS=<reports_servlet_help_file_title>
    #DIAGHEADTAGS=<reports_servlet_help_file_body_tag>
    #HELPURL=<url_of_customized_help_file_for_reports_servlet>
    #SINGLESIGNON=YES
    OID_ENTITY=%REPORTS_OID_ENTITY%
    #ALLOWHTMLTAGS=NO
    #REPORTS_NETWORK_CONFIG=rwnetwork.conf
    #OIDCON_INIT=10
    #OIDCON_INCREMENT=10
    #OIDCON_TIMEOUT=0
    DEFAULTCHARSET=JA16EUC
    #DEFAULTCHARSET=EUC-JP
    Content of cgicmd.dat:-
    osk47zgenp: report=%1 userid=utimainapp/utimainapp@testdb rundebug=NO desformat=delimited destype=cache mode=bitmap mast_ext=roymask.xls p_start_dt=%2 p_end_dt=%3 p_srvc_id=%4 p_sch_id=%5 p_agnt_cd=%6 p_user_id=%7 p_sesn_id=%8
    Report URL is:-
    http://10.10.100.110:8890/reports/rwservlet?osk47zgenp+rp_os424_mat_recon.rdf+30-JUN-2009+01-JAN-2010++31++shashi+1492544
    Error coming on browser:-
    REP-110: File 'rp_os424_mat_recon.rdf=' not found.
    REP-0110: Unable to open file 'rp_os424_mat_recon.rdf='.
    Content of rwservlet.trc:-
    [2011/1/19 7:37:1:624] (RWClient:doGet) enter...
    [2011/1/19 7:37:1:625] Debug 50103 (RWClient:doGet): QueryString: osk47zgenp+rp_os424_mat_recon.rdf+30-JUN-2009+01-JAN-2010++31+
    shashi1492544
    [2011/1/19 7:37:1:625] Info 50103 (RWClient:processRequest): reload key map file: s_reloadKeyMap: YES
    [2011/1/19 7:37:1:626] Debug 50103 (KeyEntry:replaceParams): report=rp_os424_mat_recon.rdf= userid=utimainapp@testdb rundebug=N
    O desformat=delimited destype=cache mode=bitmap mast_ext=roymask.xls p_start_dt=30-JUN-2009= p_end_dt=01-JAN-2010= p_srvc_id=31=
    p_sch_id=shashi= p_agnt_cd=1492544= p_user_id= p_sesn_id=
    [2011/1/19 7:37:1:626] Debug 50103 (RWClientUtility:isFromPortal): portal: null
    [2011/1/19 7:37:1:626] Debug 50103 (RWClientUtility:isFromPortal): webdbversion: null
    [2011/1/19 7:37:1:627] Info 50103 (RWClientUtility:findServer): Failed to bind to server: test
    [2011/1/19 7:37:1:627] Warning 50103 (RWClient:startInProcessServer): start inprocess server test
    [2011/1/19 7:37:1:657] Debug 50103 (NetworkUtility:getIOR): Found a server and returning the IOR
    [2011/1/19 7:37:1:658] Debug 50103 (ServerManager:getServer): Found server class object
    [2011/1/19 7:37:1:659] Debug 50103 (ServerManager:getServer): ping server successfully
    [2011/1/19 7:37:1:660] Debug 50103 (RWClientUtility:getReportsServer): server: test
    [2011/1/19 7:37:1:660] Debug 50103 (ServerManager:getServer): Found server class object
    [2011/1/19 7:37:1:660] Debug 50103 (ServerManager:getServer): ping server successfully
    [2011/1/19 7:37:1:661] Debug 50103 (AuthManager:getAuthId): server secure: false
    [2011/1/19 7:37:1:663] Debug 50103 (RWClientUtility:getReportsServer): server: test
    [2011/1/19 7:37:1:664] Debug 50103 (RWClientUtility:getReportsServer): server: test
    [2011/1/19 7:37:1:664] Debug 50103 (ServerManager:getServer): Found server class object
    [2011/1/19 7:37:1:665] Debug 50103 (ServerManager:getServer): ping server successfully
    [2011/1/19 7:37:1:666] Debug 50103 (RWClientUtility:isFromPortal): portal: null
    [2011/1/19 7:37:1:666] Debug 50103 (RWClientUtility:isFromPortal): webdbversion: null
    [2011/1/19 7:37:1:667] Debug 50103 (RWClient:runReport): cmdline: p_end_dt=01-JAN-2010= baseUrl=http://10.10.100.110:8890/report
    s/rwservlet/getfile/ userid=utimainapp@testdb USER_AGENT="Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 5.1; Trident/4.0)" p_srv
    c_id=31= SERVER_NAME=10.10.100.110 jobname="rp_os424_mat_recon.rdf=" p_sesn_id= mast_ext=roymask.xls getFilestr=/no> imagekey=re
    ports9i p_user_id= REMOTE_ADDR=10.10.105.54 SERVER_PROTOCOL=HTTP/1.1 authid=RWUser p_start_dt=30-JUN-2009= mode=bitmap REMOTE_HO
    ST=10.10.105.54 destype=cache SERVER_PORT=8890 p_sch_id=shashi= report="rp_os424_mat_recon.rdf=" expiredays=0 ACCEPT_LANGUAGE=en
    -us desformat=delimited p_agnt_cd=1492544= SCRIPT_NAME=/rwservlet rundebug=NO
    [2011/1/19 7:37:1:668] Debug 50103 (ServerManager:getServer): Found server class object
    [2011/1/19 7:37:1:669] Debug 50103 (ServerManager:getServer): ping server successfully
    [2011/1/19 7:37:1:669] Debug 50103 (ReportRunner:connectToServer): New Connection request for userid: RWUser to server: test
    [2011/1/19 7:37:1:673] Debug 50103 (ReportRunner:connectToServer): Connection succeeded for user: RWUser to server: test
    [2011/1/19 7:37:1:709] Info 51022 (ReportRunner:Release): Connection object has been released
    [2011/1/19 7:37:1:711] Exception 110 (): File 'rp_os424_mat_recon.rdf=' not found.
    REP-0110: Unable to open file 'rp_os424_mat_recon.rdf='.
    oracle.reports.RWException: IDL:oracle/reports/RWException:1.0
    at oracle.reports.RWExceptionHelper.read(RWExceptionHelper.java:67)
    at oracle.reports.server._ConnectionStub.runJob(_ConnectionStub.java:504)
    at oracle.reports.client.ReportRunner.dispatchReport(ReportRunner.java:288)
    at oracle.reports.rwclient.RWReportRunner.dispatchReport(RWReportRunner.java:86)
    at oracle.reports.rwclient.RWClient.runReport(RWClient.java:1671)
    at oracle.reports.rwclient.RWClient.processRequest(RWClient.java:1525)
    at oracle.reports.rwclient.RWClient.doGet(RWClient.java:366)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
    at com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:65)
    at oracle.security.jazn.oc4j.JAZNFilter.doFilter(Unknown Source)
    at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:663)
    at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:330)
    at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:830)
    at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:285)
    at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:126)
    at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:192)
    at java.lang.Thread.run(Thread.java:534)
    [2011/1/19 7:37:1:711] Debug 50103 (RWClientUtility:isFromPortal): portal: null
    [2011/1/19 7:37:1:711] Debug 50103 (RWClientUtility:isFromPortal): webdbversion: null
    [2011/1/19 7:37:1:716] Debug 50103 (RWClientUtility:isStatusFormat): statusformat: null
    [2011/1/19 7:37:1:717] Debug 50103 (RWClientUtility:isStatusFormat): statusformat: null
    [2011/1/19 7:37:1:717] (RWClient:doGet) ...exit

    HI,
    From where can I get access of the Doc id 341188.1. Could u tell me the solution? I'm stuck with it for more than 2 weeks.
    Thanks in advance.
    Regards,
    Shashi Ranjan

  • Problem with arabic language in report 10g

    hello all, sorry i can't speak english very well
    im using oracle database 10g and forms,report 10 g
    windows xp sp3 operating system
    i call my report from my form its working very good
    but report language appear  is symbol something like this pic my language is arabic
    [http://imageshack.us/photo/my-images/6/reporterror.jpg/]
    please help me and thank's

    rzuluaga wrote:
    Hi,
    - What is the NLS_LANG value you are using for your reports environment?
    - How is the output if you use desformat=html?
    - What font are you using in this report?
    - When you run the reports in Reports Builder how does it look?
    - There is a good support note regarding Font issues that is worth it to review
    Reference
    Master Note for Font Issues in Oracle Reports (Doc ID 1297012.1)
    Regards
    What is the NLS_LANG value you are using for your reports environment?
    ARABIC_EGYPT.AR8MSWIN1256
    How is the output if you use desformat=html?
    [http://imageshack.us/photo/my-images/221/report1h.jpg/]
    arabic is good is html but design not good
    What font are you using in this report?
    Arabic Transparent -i sure this font is good for arabic-
    When you run the reports in Reports Builder how does it look?
    [http://imageshack.us/photo/my-images/191/report2vl.jpg/]

  • Can I use Oracle Reports 10g with Apps 11.5.10 version?

    Apps Version is 11.5.10
    Oracle Reports 10g is compatible with 11.5.10 or not?
    If Oracle Reports 6i is the only compatible version with 11.5.10 , from where I can download Oracle Reports 6i?
    Thanks in advance.

    Hi;
    As you said 6i should come with ebs, If they are not able to find it can we raise an SR to get/download oracle reports 6i?I still cant get what is reason of you need to install 6i spreatly? Anyway it comes by default installation. Its mean you have it already,if you havent you cant work wiht ebs nomore.
    In addition to EBSDBA post,Please see below great link which is posted by Hussein Sawwan
    rapidwiz options *<< Posted by Hussein Sawwan*
    Regard
    Helios

  • Issue with Oracle Report 10g output

    I want to generate text output in Oracle Reports 10g. I am using paper layout.Length of the fields want to print is 750. Each line is broken in the output after 120 characters length apporx. Please let me know if there is any way to print complete 750 characters.

    Sample output is coming as below :
    T2013 56600084112345                                                                                         FPWC
                                                                           955 OLD WILMINGTON RD                   FAYETTEVILLE
         CUMBERLAND                 NC28301                   00000001CONTACT TESING                          1234567890
                    00000001          I'
    I want it to be discplayed in single line instead of breaking.

  • XML Publisher is not integrating with Reports 10g Concurrent program

    Hello,
    I created report in reports 10g. Saved report in the custom_top/reports/US. Created a concurrent program for the report with output as XML. Created a Data Definition with the same short name as the concurrent program and created a template used the same short name as the Data Definition, associated template with the data definition. Uploaded the .rtf file to the template.
    The issue i have is when i run the concurrent program the output is xml tags rather than the xml publisher report.
    Any help will be appreciated.

    | Starting concurrent program execution...
    +-----------------------------
    Arguments
    P_Start_Date='01-JAN-11'
    P_end_Date='15-AUG-11'
    Forcing NLS_NUMERIC_CHARACTERS to: '.,' for XDO processing
    APPLLCSP Environment Variable set to :
    Current NLS_LANG and NLS_NUMERIC_CHARACTERS Environment Variables are :
    American_America.AL32UTF8
    Enter Password:
    Report Builder: Release 10.1.2.3.0 - Production on Wed Aug 24 09:25:14 2011
    Copyright (c) 1982, 2005, Oracle. All rights reserved.
    Start of log messages from FND_FILE
    End of log messages from FND_FILE

  • Oracle Database10g Express Edition's compatibility with Forms/Reports 10g

    hi,
    I have a problem while connecting from Oracle Forms/Reports 10g to Oracle Database10g Express Edition.I have configured through the net configuration assistant and it shows the test is also successful. But while connecting from Oracle Forms/Reports 10g, an error is being displayed saying that the TNS could not resolve service name(ORA - 012154). I am able to connect to my database server normally. I got a doubt now regarding Oracle Database10g Express Edition's compatibility with Oracle Developer Suite 10g. Can I use Oracle Database10g Express Edition as backend for Forms/Reports 10g in a stand alone machine.
    Can anyone please give me a solution regarding my issue.
    Thanks in advance.
    RAKESH

    12154 means that the TNSNAMES.ora that reports is using does not understand what the '@XE' means.
    Check that you do not have several different TNSNAMES.ora files - there are probably several, and the one you are using probably does not point to XE. This is the most common cause I've seen.

  • I'm debutante in oracle 10g how to create a database with picture?

    I'm debutante in oracle 10g how to create a database with picture? help please

    d7401ec1-d4d6-4e54-9eb4-2181ac367d0c wrote:
    I'm debutante in oracle 10g how to create a database with picture? help please
    Oracle 10g is obsolete.  Oracle 11g is already at terminal release.
    Have you installed the Oracle rdbms software?
    Installing Oracle and Building the Database
    If you are going to be a professional DBA, you need to learn to
    1) read the documentation
    2) wean yourself from dependence on pictures and GUIs.
    3) read the documentation
    =================================================
    Learning how to look things up in the documentation is time well spent investing in your career.  To that end, you should drop everything else you are doing and do the following:
    Go to  docs.oracle.com.
    Locate the link for your Oracle product and version, and click on it.
    You are now at the entire documentation set for your selected Oracle product and version.
    BOOKMARK THAT LOCATION
    Spend a few minutes just getting familiar with what is available here. Take special note of the "books" and "search" tabs. Under the "books" tab (for 10.x) or the "Master Book List" link (for 11.x) you will find the complete documentation library.
    Spend a few minutes just getting familiar with what kind of documentation is available there by simply browsing the titles under the "Books" tab.
    Open the Reference Manual and spend a few minutes looking through the table of contents to get familiar with what kind of information is available there.
    Do the same with the SQL Reference Manual.
    Do the same with the Utilities manual.
    You don't have to read the above in depth.  They are reference manuals.  Just get familiar with what is there to be referenced. Ninety percent of the questions asked on this forum can be answered in less than 5 minutes by simply searching one of the above manuals.
    Then set yourself a plan to dig deeper.
    - *Read a chapter a day from the Concepts Manual*.
    - Take a look in your alert log.  One of the first things listed at startup is the initialization parms with non-default values. Read up on each one of them (listed in your alert log) in the Reference Manual.
    - Take a look at your listener.ora, tnsnames.ora, and sqlnet.ora files. Go to the Network Administrators manual and read up on everything you see in those files.
    - *When you have finished reading the Concepts Manual, do it again*.
    Give a man a fish and he eats for a day. Teach a man to fish and he eats for a lifetime.
    =================================

  • Can Reports 10g Be Run with EBS 11i?

    Can reports 10g be run with E-Business Suite 11i (11.5.10)?
    Thanks,
    Kurz

    Output from EBS Excel is XHTML, so anything that understands that ... from memory Excel 2003 or higher but check doco.
    Gareth

  • Which label printers work with Reports 10g?

    Hi,
    I'm looking to buy a label printer for my application which is Forms/Reports 10g.
    I didn't have a lot of luck with Oracle Reports printing to non-standard printers, so any suggestion on what make / model that you have used in your projects is appreciated.
    By the way, the Application Server is 10g (9.0.4) installed on a Windows 2003 server machine.
    Thanks.

    Anyone?

  • Need help with Oracle reports 10g

    Hi
    we have a requirement in a oracle 10g application
    this application is on the unix server
    the requirement is such that the user must be able to print a report directly to the default printer
    when the user clicks on the button a report must be printed on the users default printer
    can u help us understand that how can we configure the local printer of the user on the unix server?

    hi, piyush9010
    Check this following link...
    Oracle reports 10g output directly to printer
    Oracle reports 10g output directly to printer
    Make your printer as shared printer then try.
    Use DESTYPE=PRINTER.
    http://qamarsyed.blogspot.com/2011/02/how-to-print-oracle-report-to-network.html
    http://docs.oracle.com/cd/E14571_01/bi.1111/b32121/pbr_cla005.htm#i637246
    Hope this helps
    If someone's response is helpful or correct, please mark it accordingly.

  • Oracle 11g 11.1.0.6.0 Standard with Reports 10g . Intranet possible?

    Friends,
    I have Oracle 11g Standard edition and Reports 10g in Win XP. How can I publish my reports in Intranet?
    Kindly guide me
    -mathews

    The reports generated by Reports Builder 10g
    -mathews

Maybe you are looking for

  • Network Problem From a N00b

    hi, i am new in arch.. i installed succesfully and like this.. But can't connected the internet.. i am a standard dhcp user over eth0.. Which files should i edit? i set eth0="dhcp" in /etc/rc.conf when i enter "dhcpd" in terminal, get "no submask" or

  • Can I connect XBox 360 to imac

    how can I fnd out how to connect the xbox 360 to Imac 27 inch

  • Imac8 running slow

    My 2008 iMac 8 is running very slow these days.  I do have 4Gb of SDRAM and can upgrade to 6 I think.  Does anyone have any suggestions? Not sure if I can put a 2 and a 4 GB memeory module(s) in for a total of 6GB.  Thanks in advance.

  • Bose not optimized for iPhone?

    When trying to use my new iPhone with my Bose speakers it states that the accessory is not optimized for this iPhone, yet it plays my husband's just fine (same model).  Any ideas?

  • Embedding Flash Player 9 on Linux

    Hi there. I wish to view some swf movies (i.e. adverts) in my C/C++ app. Is there any way to embed ONLY a flashplayer inside such application? I don't need to embed full featured web browser, and such thing on linux isn't possible in any "portable" w