Tabular form delete button not quite working as it should

Hello,
Theres a little problem with the delete button on my tabular form. When I select the rows I want to delete with the checkboxes then click the button, it deletes the checked rows but it ALSO gets rid of all the rows that I haven't yet saved i.e. that I created while I was on that page, the same time I checked the boxes
If I save the items then go back to the page and select them it works fine, but obviously the end users won't know to do that...
Is there a way to stop this happening? It happens on all the tabular forms I have in my app...so presumably its a fairly common problem? but I can't find an answer on the interwebs...
I did think maybe I could run the MRU process before the MRD process when I click the delete button as well as when I click the save button...but I thought I would ask an expert opinion before messing something up. It all works fine other than that...
Thanks
abarnybox

Apple will not repair this problem, they will offer replacement iPhone 4S for $199, it will be exact perfect iPhone just like yours same color, GB everything. If you want to try Virtual Lock Button, tap Settings App > General > Accessibility > Assistive Touch > ON > tap new screen white button > tap Device > Lock. This can be used to turn OFF iPhone. To turn iPhone ON, connect to power, ie charger or USB of computer.

Similar Messages

I have an iPhone 5. I got it just over a year ago and the power button recently quit working. Since ive had it for over a year, can i take it in and have it replaced or fixed?

I got my iPhone 5 a little over a year ago, and my power button recently quit working. Since ive had it for over a year, can i still get it fixed or replaced?

Wow that is so unlucky. If I was you I would try talking to someone at the Apple Store, explain your situation and don't be shy to shed a tear or too. Its just a shame 3 weeks after your phone getting hardware problems. I know people will say, oh buy Apple Care but I feel ya and I know adding that extra money in the beginning feels pointless and expensive.
Worst case scenarion like I said you will have to pay Apple 269 for them to swap phones. Or if you have any nerd friends have them fix it for you. Its a tedious repair the way the power button has some weird hinge that needs to snap on and ribbons are so thin. I do not advise for you to attempt to fix your self unless you don't care if you break it completely.
Alternatively you could just turn on Assisitive touch on accessibility and use that. That way you wont need to pay anything to fix your phone and wont need to take it apart either.

HT201401 my down button has quit working

My down volume button has quit working. Has anyone else had this problem? Thank you!

So bring your phone in to Apple. If under warranty and the problem is determined to be a hardware failure and not due to user abuse then the phone will be replaced.

Delete Button doesn't work

I have 2 accounts in my Inbox. When the Inbox is highlighted in the Source list ( as opposed to highlighting one of the 2 .Mac accounts) the Delete button works fine when highlighting a message that will be moved to the Trash. However, when an individual account is highlighted and I want to move a messsage to the Trash, the Delete button won't work. Any thoughts ?

It works for me. Is it the Delete button in the Toolbar that doesn't work, or the Delete key in the keyboard, or what? Doesn't any other way of deleting a message work either (e.g. Edit > Delete)?

Trying to delete pages 21-24 on iPhoto book but "remove pages" option grayed out and pressing delete button not doing anything. Help!

Trying to delete pages 21-24 on iPhoto book but "remove pages" option grayed out and pressing delete button not doing anything. These extra pages resulted from using Autoflow and now we can't seem to get rid of them. Help!

Good morning Old Toad.
I did as you suggested:
1) Booted from install CD.
2) Ran Disk Utilities on internal hard drive--no repairs necessary. For good measure, did the same thing on external drive. Also no repairs necessary.
3) Checked software update--no updates found. About this Mac said I was already running 10.4.7. For good measure, I downloaded the latest and installed it. Since it let me run the install, I'm not sure if I installed something new or reinstalled what I already had.
4) I rebooted from CD, ran disk utilities, ran repair disk--no repairs necessary. Repaired permissions and a lot of permissions repaired.
5) Tried to delete the files and the same old thing happened: kernel panic. The specific message:
panic(cpu 0 caller 0x00102A08): jnl: transaction too big (1587712 >= 1572352 bytes, bufsize 8192, tr 0x29f1fb0 bp 0x2801de40)
So there's no change in my status.
I'm trying to delete the files because:
A) They already take .5 Gb.
B) I can't get rid of them ever. If I move the problem files to a different folder, I can only do one successful drag-and-drop backup to the external drive until the "new" thumb segments become unerasable just like the previous versions and crash the system.
C) I can't even "just" drag and drop every file/folder except the thumbs, because that ends up crashing the system as well. So I have to drag and drop every file/folder in the iPhoto hierarchy individually. Which makes me less inclined to backup, which defeats the purpose of a backup.
D) After the iPhoto fiasco I'm just crabby about all the Apple screw-ups I'm experiencing and I want to get them fixed.
Thanks for your help. Any additional suggestions would be appreciated.
G4 Mac OS X (10.4.6)

TS3274 delete button doesn't work

I have been trying to delete multiple photos that I imported from my Macbook. It will let me select the photos, but when I touch the red delete button it does nothing. What should I do?

Synced photos cannot be deleted on the iPad. Only photos taken with the iPad and transferred with the Camera Connection Kit can be deleted.
You need to delete the photos in iTunes and sync again.

Delete button doesn't work in tabular form after upgrade from APEX3.2 to 4

I just upgraded the APEX from 3.2 to 4.0. However, my application is not working anymore.
First of all, my delete button in tabular form is not working. When I select a row and click the delete button, the row is not deleted, however the message showed 1 row is deleted.
Could you anybody tell me how can I debug this problem?
Thanks a lot !

I had the same problem. I first tried the solution above, but that didn't work. I also had a derived column for a custom popup and some display only columns. I removed the derived column and took out the display columns from my query. I then made sure my column order matched the source query. I applied changes and the delete button worked. FYI. I found out by some testing that it was actually trying to delete from the table, but with the wrong id. My first editable field was qty so if the qty was equal to 2 it then tried to delete from the table where pk=2(I had to restore that record). I believe it is related to the bug above. Backup your app first. I always do before I mess with the tabular forms.
Jeff

Table delete button doesn't work with Virtual Forms

I applied all of Winston Prakash's tips to my project table (http://blogs.sun.com/winston/category/Creator), but my table is not the only component in the page, so I had to use Virtual forms.
When I add the "Delete" button, i have to put it on a Virtual Form. I followed the steps on the multi selection table and the "Adding a button panel to the table component header" post, but when I select a row, the JavaScript works well (the row changes to yellow)... but the action code gets a :
getTableRowGroup1().getSelectedRowsCount()==0
and getTableRowGroup1().getSelectedRowKeys().length==0.
I tried almost everything with the forms... I don't know what I missed...

It works for me. Is it the Delete button in the Toolbar that doesn't work, or the Delete key in the keyboard, or what? Doesn't any other way of deleting a message work either (e.g. Edit > Delete)?

Delete button not working on the desktop

Hello There,
I am a new mac user. I don't know but for some reason, delete button on the desktop is not working, i.e. if I want to delete something I have to right click and then select "move to trash", is there are workaround for that, or it is like that only.
Thanks in advance!!
Regards
Nikhil

Hi There,
First, welcome to Macintosh! To delete a file, use Command + Delete (The key with the apple logo on it is the command key.) Pressing delete alone will not move the file to the trash.
Good luck!

InfoButton PJC Demos for Forms (tooltip buttons) - not working

Hello everybody,
I am new to using PJC and JavaBeans in forms. I have on my laptop Oracle Developer Suite 10g (10.1.2.0.1) and Forms Demos version 9.0.4.2.0 I downloaded from OTN. I studied InfoButton PJC application (buttons that show tool-tips at mouse-over).
Now, I want to create in one of my old forms such a button. I followed exactly the steps of the demo, that is:
1. I created a form with a button TEST_BUTTON for which I set the Implementation Class property to oracle.forms.demos.enhancedItems.InfoButton.
2. On the form's canvas I also created a text item named INFO with the following properties:
X Position = 255
Y Position = 107
Width = 100
Height = 100
3. At form level, I created the trigger WHEN-NEW-FORM-INSTANCE in order to set the button's properties as follows:
SET_CUSTOM_PROPERTY('CONTROL.TEST_BUTTON',1,'INFOBUTTON_TEXT','This is the tooltip text');
SET_CUSTOM_PROPERTY('CONTROL.TEST_BUTTON',1,'INFOBUTTON_FIELDPOS','288,128');
4. I created in my formsweb.cfg file a configuration section for my form.
[pjc_demos_dana]
pageTitle=OracleAS Forms Services - InfoButton Demo Dana
IE=jinitiator
baseHTMLJInitiator=demobasejini.html
archive_jini=frmall_jinit.jar,/forms/formsdemo/jars/infobutton.jar
form=pjclaunch_dana.fmx
width=675
height=480
separateFrame=false
splashScreen=no
lookAndFeel=oracle
colorScheme=blue
background=/formsdemo/images/blue.gif
When executing the form, the button has round margins as said in the documentation; at mouse over the cursor takes the form of a small hand but there is no tool tip. I receive no errors, only that it doesn't show the tool tip.
I don't understand why it's not working, what I did wrong ...
When setting the 'INFOBUTTON_FIELDPOS' property - input parameter X,Y - the documentation says: "This property should be set to a string containing a X,Y comma separated pair providing the location of the target field in pixels relative to the top left hand corner of the window. The X,Y pair simply has to define a point anywhere within the target field, it doesn't have to exactly define the corner".
What is the target field? The text item I created at step 2)? The documentation is not clear here ...
Any help will be appreciated.
Daniela

Dear Safwan Bhai,
As salaamo alaikum Rahamatulla hi burakathu!!
Actually I'm having a multi record block in which all the emp no., days of attendance, etc will be displayed when I click on the search button. My requirement is when point the mouse over the emp no, the emp name must be displayed as a Tool tip text. My fields are non-editable, so Post-Change is not working. I placed the coding in the When-new-item-instance - in this case the emp name is displayed, but only for the first field, when I move the mouse to second and third fields, the empname of that particulart field is displayed as a tool tip but in the first field only.
Any other suggestions?
Anyway I would appreciate your help.
Thank you.
With Kind Regards,
Perumal Senthil Alagu.

Setting default value of Tabular form item is not working

Hi,
I have a tabular form and in that I want to set the default value of the username to app_user. So in the default value of the item, I wrote v('app_user') and type Pl/SQL, but that does not seem to work. I tried the static application & page item with :app_user. That threw an error.
Also, I wanted to populate the date field in one column. Doesn't sysdate work?
Thanks,
Sun

Bob, I did read that. MY problem is that it is still not working. I am wondering if this is because the table is in execute query mode maybe? I am wondering if the default value needs to be added after the tabular data is populated through some other way? Maybe the default value would work only for static non database items?
ThanksYou're right, I just tested that using the default setup on the column in report attributes and it did not work.
I think you'll have to update the columns with the default value post query but I'm not sure exactly what you need to do.
I have a form that has a weight entry column. I tried changing the query to set the default value in the query
from..
Select Weight
From...
to
Select 999.99 Weight
From...That appeared to work, but the 999.99 value was not populated back to the Database since it wasn't entered through the form UI. APEX maintains the entered values internally so it can do its checksumm processing and update modified rows back to the DB. I'm thinking you could update what needs to be updated using Javascript in a Dynamic Action, but I'm afraid I don't know how to do that.
Excuse my incorrect assumption when first replying.

IPod Touch 4th gen home button not always working and deletes all songs on iPod.

I bought my ipod touch on may but since that day, the home button is not alway working and also sometimes when I sync my Ipod, it remove all the songs from it without asking me. What can I do? It is so frustrating..
thanks in advance for help.

Try:
fix for Home button
Fix a broken, unresponsive or sticky iPhone Home Button
- If you have iOS 5 and later you can turn on Assistive Touch it add the Home and other buttons to the iPods screen. Settings>General>Accessibility>Assistive Touch
- If not under warranty Apple will exchange your iPod for a refurbished one for:
Apple - Support - iPod - Repair pricing
You can do it an an Apple store by:
Apple Retail Store - Genius Bar
or sent it in to Apple. See:
Apple - Support - iPod - Service FAQ
- There are third-party places like the following that will repair the Home button. Google for more.
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens
Regarding the songs problem, Are you always syncing to one computer/iTunes library? If y sync to another computer/iTunes library your iPod will be erased and its contents replaced with what is in the iTunes library of the second computer.

Why does the delete button not work in iPhoto

How can I get the delete button to work in iPhoto?

Have you tried deleting the app from your history, and restarting it? (Otherwise --> restart/reset the iPad)

How to set a column value in a tabular form via button

Hi All,
I am using Apex 3.0.1. And to create the form I am using the APEX interface tool
I have tabular updateable report. In the same page I have a LOV field where I can choose some possible results.
I want to have a button so I can select a value in the LOV, take this value and populate the column value to the LOV value for all rows in the tabular form.
The LOV and the buttons are done.. to update the column I tried creating a pl/sql that is executed when the button is pressed and has the following update in a loop for each element:
begin
for i in 1..APEX_APPLICATION.g_f01.count loop
APEX_APPLICATION.G_F02(i) := :P1_MY_LOV_VALUE;
end loop;
commit;
end;
When I press the button, the page refreshes but nothing happens. I don't see any changes in the Values for the column I am trying to update
Thanks

Hi user477501,
If you are doing this after a SUBMIT, then try updating your data table instead of the g_f02 array. When you page is re-rendered, it should re-query your data table.
If you do not want to submit the page, then try your hand at JavaScript.
A good reference for this is Mike Hichwa's article at:
http://www.oracle.com/technology/oramag/oracle/06-nov/o66browser.html
Be sure to download the example application, it is very helpful.
I hope this helps.
Patrick

DELETE button not active in Invoice

Hi All,
We have ECC 6.0 and SRM 5.0 . After creating Invoice in SRM front, User keeps the Invoice in HELD or posts it with errors when it goes into "TO BE CORRECTED MANUALLY" status. Now when the user agains views it in display mode, only CHANGE button is active. DELETE is greyed out .This is the case only for invoices created by the same user. So, can you please throw some light on what can be the reason for this inconsistency as for some users the DELETE button works and some it does not.
Any help will be highly appreciated.
Regards,
Sheetal.

We had raised a call with SAP and SAP has replied back saying " This logic was implemented for technical reasons, to avoid, that the invoice data is still in the buffer and modifications to the document which could lead to inconsistencies. This logic was implemented by note 728714, and should prevent above mentioned situation.
This issue is resolved now.
Regards,
Sheetal.

Tabular form delete button not quite working as it should

Similar Messages

Maybe you are looking for