Tabular Material consumption with batch char info in PI Sheet

Hi,
I am currently creating PI sheet for blending in a mining company.
We blend several coal with some grade to get the grade we obtain.
coal with different grade maintain in different material with classification,
not in batch classification
In PI sheet , we have created tabular material consumption that need to be inputed,
the problem is we can not output the coal material classification char in the table material consumed in PI sheet
Can you help me how to outpur material classification char in tabular material consumed in PI sheet??
Best regards,
Freddy ha

Are you using the Best practices for mining installation? If so, check out the PI category and PI chars already available for a variety of characteristics - [http://help.sap.com/bp_bblibrary/600/HTML/X13_EN_AU.htm]
If not, why not create a new PI char with customized function module to pull the appropriate material class Characteristics and values? you can use the PI char PPPI_PROCESS_ORDER as a reference

Similar Messages

Qm with Batch chars

Hi Gurus,
I have big requirement which you might have faced this before, but very hard to understand.
we have three components which goes in another component for eg: B1, B2 and B3 goes under component A1.
B1 has got internal and customer specifications and has batch number and characteristics
B2 has got internal and customer specifications and has batch number and characteristics
B3 has got internal and customer specifications and has batch number and characteristics
All the specifications which get recorded in results recording should get copied into component A1.
PLease let me know if you have any queries on the above process and Eagerly waiting for your suggestions.
Thanks in advance,
Quantum.

Dear,
You can do this by Batch Derivation,
Please refer this link,
[Batch Derivation|Batch Derivation]
Regards,
R.Brahmankar

Material consumption thru PI sheet

Hi, I want to do the GI thru PI sheet. Pls advise how to set the same?

Hi
Use any one of the following standard PI char and asssign it in Master recipe to phase.
CONS_1     Material consumption, minimum scope
CONS_2     Material consumption, batch in message
CONS_3     Mat.consumption, storage locat. in mess.
CONS_4     Mat. consumption, reservation in message
CONS_5     Mat.consumpt., final issue ind. in mess.
CONS_BDR     Mat.consumption, batch determinat.,split
CONS_BDS     Mat. consumption, batch determination
CONS_C     Mat. consumption, target/actual value
CONS_I     Material consumption, all message char.

Material Ledger with Split Valuation Type 'X' with FIFO

Hi,
The requirement from the customer is to have Raw Material, Intermediary and Finished Products valued at Actuals and on a FIFO basis. According to me, this is possible only if we activate Material Ledger, have batch split valuation u2018Xu2019 as the valuation type and have a batch search strategy which does a FIFO. Are there any technical issues with this solution? Or is there a better solution? Is any organisation ever using this solution for a similar requirement? As an extension of this requirement, how does commodity trading companies running in SAP handle their inventory and COGS valuation?
Thanks and Regards
Shivram.

Hi,
Using Material Ledger with batch management and split valuation of each batch ("X") leads to most aaccurate FIFO valuation result, however, depending on how many material and batch the customer has, huge number of materials will be processed and it will affect the performance issues. You should check the number and expected period-end time frame scheduling at least.
Financial responsible tell you to need this kind of solution (detailed FIFO calculation)?
They usualy needs to get simple FIFO valuation, meaning they don't care each individual logistic material movement as FIFO, but only care of periodic FIFO. I know, it depends on Finacial responsibes or their auditors, so it's also not general.
Please double-check the new FIFO valuation function for Material Ledger with using Periodic Closing and AVR. Some information is in SAP Note 1431829 and 1247053. Related transactions are there, CKLMBB_xxxx under Actual Costing/Material Ledger -> Balance Sheet Valuation Procedures. I couldn't find any official documents for Material Ledger + FIFO valuation (like Release Notes).
Hope this will be an additional option to yours.
Best regards, Takashi

Milk receiving and consumption with components

Hello SAP Guru's,
We here in Cheese manufacturing use multiple Batch specific UOM, while Milk receiving. Milk has components FAT, Protien, Other Solids and Water. I have created 3 Batch specific UOM AU1- FAT, AU2 - Protien and AU3 - Other Solids. When i receive Milk, i enter the percentages as the batch characteristics for all the 3 batch specific UOM and i can see the stock in each of those UOM's.
So far so good....I have all these 3 Batch Specific UOM's defined in the Cheese BOM, with the same Milk material number and batch specific UOM.
But when i try to consume the Milk Batch, i cannot consume the same Milk batch for all 3 components. Do you know how can i consume the same Milk Batch for all the 3 components in the process order for Cheese manufacturing?
Thanks in advance.
Regards,
Mangesh

Hi Uday,
Pl find answers to your questions;
1. In which unit do you make a GR of any batch of a milk. Do you make payment on the bais of these active contents like Fat, protiens etc.
We receive the Milk in Lbs and also consume it in Lbs. For batch characteristics recorded during receiving inspection, are entered in Batch Specific UOM and are reflected in the stock for each of the components (FAT, Protien and Other Solids). In MMBE, we can check the stock for each component of the Milk.
This is a normal practice in Dairy industry to pay the vendor based on the components of the Milk received. The percentages vary from batch to batch, farmer to farmer. Hence we would like to pay to the vendor based on the components of Milk received. We also do want to value the Milk inventory based on the components.
2. Since you have assigned these componenets as batch characteristics so while GR you enter the % of all these in the classification. Is it so.
Yes, we enter the percentages, for e.g. if the FAT content in the Milk after inspection shows as 3.2%, then we enter 0.032, which would amount to 320lbs of FAT, in 10,000lbs of Milk.
3. What do you mean by
But when i try to consume the Milk Batch, i cannot consume the same Milk batch for all 3 components.
I guess the example would help to clarify;
Lets say you receive 10,000lbs of Milk with Batch # 101, and it has following components;
FAT = 3.2% = 320lbs, (AU1 - Batch Specific UOM)
Protien = 3.4% = 340lbs (AU2 - Batch Specific UOM)
Other Solids = 8.3% = 830lbs (AU3 - Batch Specific UOM),
rest is all water.
So in MMBE you can check the stock for each component using Batch specific UOM.
In the Cheese BOM, Milk is defined as a raw material, but in components, hence in BOM, you enter 3 line items with same Milk material, but with Batch specific UOM to represent each component.
Now when i make a process order for Cheese FG, i want to consume batch 101, for all the 3 components. Thats where system doesn't allow to consume each component with the same batch number. Hope this is clear, pl provide your recommendations on how to handle this.

Packing Material with Batch Management and Shelf life expiration date check

Dear All,
          I created a packing material and activated batch managemnt with shelf life.
            At the time of GR the batch should be created automatically or if i want to create a batch manually for some materials how to do it in the system.
                     Help me

Before going ahead with the batch creation,
you need to activate the batch mngmnt level (i.e.Client,plant,material level)
And also activate the Nor.ranges.
Then Create the Classification,Characteristics and assign the Chrctstics to Class.
Then create the batch
T Code:
CT04 create Char.
CL02-Create Class
CL24N:Assign class to material
MSC1N:Create Batch

Report with customer info for an Sales Order with batch details

Hi
Can any one please tell me the SAP REPORT with contains data of customers were shipped a specific product (material number) by batch number. report with the name and address of the customer, the sales order number and the number of products that were shipped.
Thanks
Nick

Hi nick,
See if anybody has worked on SIS (sales information system) in your team.
He can help you out to create one info structure , by selecting desired characteristics, key figure with respective update rules. though its require lot of configuration but you can make it without abap development.
(I couldn"t make it in time to provide you detailed configuration but below given path will take you to the configuration area )
IMG - LG -Logistick information system -logistick data werhouse- data basis- field catalogue.
IMG - LG -Logistick information system -logistick data werhouse- data basis -
infostructure.
IMG - LG -Logistick information system -logistick data werhouse- data basis - updating - update defination & update rules.
( MC18, MC21, MC24,& MC30)this transaction help to create field catelogue, info system, update rule & generation log respectively.
karnesh

Material with batch management

Hi gurús,
We have a material with Batch management for which already took place movements. Sales orders and lots have already been created.
It is posible removed the mark and use the material as non material with batch lot?
Thanks in advance for the help
Regards
Enzo

Please check:
http://help.sap.com/saphelp_47x200/helpdata/en/eb/650362e5a511d285ed0000e82013e8/frameset.htm
http://help.sap.com/saphelp_47x200/helpdata/en/8d/3e59fd462a11d189000000e8323d3a/frameset.htm

Batch wise actual material consumption and activity cost

hi
my client is steel industry, client requirement is heat wise actual material and machine cost. Heat is a batch number, how i can check batch wise actual material consumption and machine cost.
regards
imdad

Hi Imdad
Whats the batch definition in your case?? have you designed One batch per Prod order or One batch per GR?
If its one batch per Prod order - you can directly see the prod order.. however, chances are less for this as Steel company might be using PCC i.e. repetitive mfg
If its one batch per GR - Then you will have to track using the Confirmation no because each Confirmation will trigger the Goods Issue and Activity Confirmations...
Using Table AFRU - You can track the individual Confirmation no and also the Activity Qty confirmed....COSS / COSSD will have the Activity Cost
If any goods mvt are posted during the Confirmation, you would see a Mat Doc No populated in the field "Mat Doc"
Br, Ajay M

Material with batch is stuck in storage bin.

Dear Gurus,
I have a scenario here.
previously material A has turn on the batch management. later then, it is turn off without checking properly. Now in the system, material A is stuck in a few bins with batch. Our master data user do not allow us to turn on and off the batch because it will affect other plant.
Has anyone encounter such issue before?
I need help badly.
Thanks in advance.
Regards,
Santthi.

You cannot turn off batch managment "without checking properly". You could just turn off BM, if batches already exist, with an own created ABAP. And this alone is causing your troubles.
Best, you take a weekend where nobody in the plants are working, then you use the same uncomplient ABAP to switch BM on again, goods issue your batches, run archiving, for the batch records and switch off BM using the regular way.

Introduction of Tolerrance for consumption of Raw material in a batch.

Hi gurus,
can i introduce tolerrance to the raw materials that are consumed in batches while production order comsumption.This is because, we feel that during Production Order consumption the one batch is not sufficient to confirm the Production Order and either a second batch is consumed or a stock correction is done.
Thanks.
naveen.

Hi ,
At the time of consumption you can put ' * ' aestrix sign in the batch field.
You will get list of batches of that material.select ur batch and consume the quantity.
Regards
Piyush

Call BMBC with specific material plant and batch

Hi, ive searched and tried several option to call t-code BMBC Batch Cockpit from a report with a specific material, plant and batch and untill now i was unable to do this.
Is my last option a batch input?
It seems that all those subscreens make BI my last resource.
Thanks for your help.

Hi,
For,
Step 2 :- Check your Data type of Characterstic.It should be Numeric.
Step 3:- First you have to assign Organization Area in Class Header then only you will find that field active in Characteristic screen.
Regards,
Dhaval

Putaway in Warehouse to Bin with same material but different batch

Hi Everyone,
I'd appreciate some help on this as I'm a bit perplexed.
When a Goods Receipt (MIGO) is being done we have a problem with the Stock not going to the correct Storage Bin. Basically we require to find a storage bin with the same material and add the receipted material to the storage bin.
However the system will not let us do this becuae the batch for the material is different and the system doesnt put the material away into the desired storage bin. Instead the system puts the material in Storage Type 902 with the PO number as the Storage Bin.
The functional consultant has asked me to implement a user exit to search for a storage bin with the same material as is being Goods Receipted and put the material in this bin. I have a problem with this becuase there is no TO being created once the MIGO is done so I dont know where to start on this problem.
To illustrate
1. Migo is done on Material 1234
2. A user exit should search for a bin already containing Material 1234 (ignoring batch) and add this receipted material to the bin.
Is this possible ??
Any help or suggestions is greatly appreciated. Thank you very your time.
Kind Regards
DK

HI,
I hope system will allow to store same material with different batch numbers in the same Bin.
System will treat it as separate quants in the Bin since Batch no: is different.
In this case you can try with Putaway strategy - I - addition to existing stock itself.
If you face any issue regarding Auto-TO creation, check the below link.
[http://help.sap.com/saphelp_47x200/helpdata/en/c6/f85c504afa11d182b90000e829fbfe/frameset.htm]
Also try to do a manual TO creation with reference to the TR in the above case in Simulation system so that you will be able to know the exact reason for the error.
Thanks & Regards,

No ATP with planning material consumption

Hello,
Can you please help to clarify if SAP allow to make an ATP check using MRP strategy 63 of Material master with PIR consumption of planning material?
I didn't find a requirement class that allow both combination Availability check and allocation indicator =3
Thanks for help
Regards

There is no strategy type available to fulfill both availability check and allocation indicator 3 in the system. So it looks your requirement is NOT standard.
Regards,

Cost(vprs) of free goods with batch managment

Dear Gurus,
I have a problem ahout free goods with batch management.
Cost(VPRS) is not accumulated in billing(free goods is not relevant for billing).
My configurations are shown as below:
Ordered goods (and batch) item category :zta1(copied from tan)
Free goods (and batch) item category :zann (copied from tann) pricing:B ;not relevant for billing;dermination cost:X
copy control(from delivery to billing):
ztan: accumulation cost :X
If I use the material without batch management,Cost of free goods(without batch) is accumulated to main item(ordered goods).
So, what can I do?
Thanks and Best Regards,
Lykin Kan

Hi,
These notes are useful:
SAP Note 1365939 - VPRS logic and Customizing settings in SD
SAP Note 547570 - FAQ: VPRS in pricing
If you have the problem in the transfer from SD conditions to CO-PA, check if you transfer only invoices to COPA, if you don't invoice the deliveries of free goods, then you don't transfer this 'sales' or costs of 'gifts' to COPA. You can check the customizing of COPA in tcode ORKE (IMG for COPA). SAP Note 74486 - INFO: Overview of consulting notes for CO-PA is a good summary about this issue.
I hope this helps you
Regards,
Eduardo
PD: I forgot SAP Note Number 33968 SD/CO-PA: Characteristics from sales doc tables
Edited by: E_Hinojosa on Sep 10, 2010 9:44 AM

Tabular Material consumption with batch char info in PI Sheet

Similar Messages

Maybe you are looking for