Tabular - Parent/Child hierarchy - hide duplicated rows problem
Hi All, in all the Tabular parent-child hierarchy examples I could find a measure is created to calculate current node depth. Later that measure [CurrentNodeDepth] is compared with aggregated node depth using MAX/MIN functions. The current node depth measure
uses ISFILTERED DAX functions like
CurrentNodeDepth := IF (ISFILTERED ('Hierarchy'[Level3]), 3,IF (ISFILTERED ('Hierarchy'[Level2]), 2, IF (ISFILTERED ('Hierarchy'[Level1]), 1)))
All works ok until you start filtering the hierarchy - that might happen with very big hierarchies - showing only part of hierarchy to speed up calculations. Once you set a filter there, [CurrentNodeDepth] measure gives wrong output and whole parent-child hierarchy
doesn't work as it should.
Can you provide more info on this, how have you modeled the hierarchy with the fact table, are you rolling up the measures for the child to the parent level (modeling as measures) or each employee is showing its own revenue only (modeled as attribute)? If it is modeled as measures where you join the employee table to the closure table and then that to fact table then are you applying any filters in your report ? If you are applying filters in your report and somehow only parent is filtered (and not its children) then you won't be able to drill down, though you will see the + sign against it.
Similar Messages
-
Problem creating standard ECC Parent-Child Hierarchy in HANA
Hi all -
I've been trying to get a hierarchy to work on the front end of a stand alone HANA system using profit center hierarchy data from SETLEAF / SETNODE tables from ECC. Here is how my test hierarchy looks:
Following another post I found around here, I created an attribute view and filtered SETNAME to 'TST_HANA'.
The resulting data when connected to my attribute view caused an error that there was no root node, so I manually inserted the last row shown here (where PCA_PARENT = SETNAME and PCA_CHILD = SUBSETNAME):
Finally, I created my parent-child hierarchy in the attribute view and connected that view to my data foundation in the analytic view via left-outer join between Profit Center and VALFROM. However, when I go to connect to my view via MDX in excel, I get the following message:
"Hierarchy create error: Multiple parents not allowed for hierarchy node TST_ND1" Clearly from the data, there aren't multiple parents for TST_ND1. It's already a pain that to use a standard hierarchy I have to manually insert a root node, but that doesn't even seem to fix the problem.
Can anyone suggest how to fix this to get a standard profit center hierarchy working?
Thank you!
AZHi,
According to me, Hierarchy level will work fine in ms excel for all analytical, calculation view using MDX Provider..
Do you have any composite primary key or composite foreign key in the tables....
r u getting correct level hierarchy output in Hana studio... plz check with all types of permutation possible.if u r getting correct output in analytical view w.r.t hana but fails to get in Ms excel..
please create Calculation view of that.. & then check the output in ms-excel..
Thanks, -
Hide parents in a parent-child hierarchy with dynamic rights
Hi all,
I'm facing the following issue with dynamic rights on a parent-child hierarchy:
scenario:
- a cube with a company parent-child hierarcy
- dynamic security on through a role on dimension data based on a list with user (login names) and their
departments, with Enable
Visual Total is switched ON
- Multiple facts connected to this hierarchy.
When a user connects to the cube (in this case with Excel or through a dashboard in Performance Point services) he/she is allowed to see the facts belonging to theirs departments and all child departments, so far so good. But the totals of the facts are
repeated for all higher parents. Now i know thats nog 'wrong' but our users think thats very confusing in some cases, so is there a way
- to hide the parents in the hierarhcy
- or to set all the parent measures to null/empty?
I prefer to make a solution in the cube so that all client programs can benefit from this solution.
thanx in advance for all input!so that User A have scope: [Dimension_Name].[Attribute XYZ] and User B: [Dimension_Name].[Attribute ABC] ?
Hi Wilfred,
If I understanding correctly, you want different user can see different dimension attributes based on the different right on role, right?
Based on my research, it seems that there is no a directly way to achieve this requirement. What we can do is that "Deselect all members" for each attribute of the dimension in Dimension Data tab, which will hide all members of the dimension for the role.
Even the dimension metadata is visible in the cube in clients, its members can't be seen. Here are some useful links for your reference.
http://saysmymind.wordpress.com/2013/01/15/hide-a-specific-attribute-hierarchy-in-role-playing-dimension-ssas-multidimensional/
http://social.msdn.microsoft.com/Forums/sqlserver/en-US/e2596eec-7c2d-48c0-8e81-538a8c632360/hide-dimension-based-on-roles
Hope this helps.
Regards,
Charlie Liao
TechNet Community Support -
No Results after build a Parent-Child Hierarchy in OBIEE11G
Hi All:
Here's an problem. I followed the "http://sandybi.wordpress.com/2010/08/17/hierarchies-in-obiee-11g-part-1/" this article step by step to create a parent-child hierarchy in admin tool in OBIEE11G.
But after check in and try to retrieve the hierarchy data in Answer. There's always displays "No Results."
Is there any suggestions for this ? Really urgent and thanks for your help.
Best regards
Sunny@Aketi
It is One way that We derive
"sys_connect_by_path(RowIDToChar(RowID),'.') as
RowIDList"
Then
We use Left Join Using
"instr(RowIDList,RowIDToChar(RowID))".sorry, didn't catch what you mean.
my site :-)
http://oraclesqlpuzzle.hp.infoseek.co.jp/4-13.html
pity, I don't know Japanese :(
@Rob
your query is good and simple :) probably it's the best alternative for the OP.
But it won't work with not a plain hierarchy, e.g.:
1
2 3
4
5 6
SQL> create table hierarchy (child,parent)
2 as
3 select 1, null from dual union all
4 select 2, 1 from dual union all
5 select 3, 1 from dual union all
6 select 4, 3 from dual union all
7 select 4, 2 from dual union all
8 select 5, 4 from dual union all
9 select 6, 4 from dual
10 /
Table created
SQL>
SQL> create table data (hierarchyid,value)
2 as
3 select 5, 10 from dual union all
4 select 6, 25 from dual
5 /
Table created
SQL>
SQL> select h.child
2 , sum(connect_by_root d.value)
3 from hierarchy h
4 , data d
5 where h.child = d.hierarchyid (+)
6 connect by prior h.parent = h.child
7 group by h.child
8 order by h.child
9 /
CHILD SUM(CONNECT_BY_ROOTD.VALUE)
1 70
2 35
3 35
4 70
5 10
6 25
6 rows selected
SQL> -
Parent Child Hierarchy - Display other dimension fields against parent
Hi,
I have a Dimension for Customer with a parent child hierarchy. The problem I have is with additional fields within the dimension. See data below:
Row Labels
Customer Group Description
Value
500116 - OOO "Starline"
30
500116 - OOO "Starline"
A - Dealer
5
818781 - OKNO
Direct / End User
10
400464 - OKNO TV
Other
15
500123 - VIDAU SYSTEMS
300
500123 - VIDAU SYSTEMS
A - Dealer
100
400396 - VIDAU SYSTEMS
Other
200
Grand Total
330
I want the Customer Group to show "A - Dealer" for the parent of the first row (against "500116 - OOO "Starline"), but its shown blank. Also, I would like other fields to do the same. As the parent relates to a row in
my dimension table, this should be possible?
Thanks in advance,
DominicHi,
Sorry it took me a while to come back to this.
My dimension has the following columns:
ID
Customer
Customer Group
Parent
1
500116
A - Dealer
NULL
2
818781
Direct / End User
1
2
400464
Other
1
My measure has 3 rows:
customerKey
value
1
5
2
10
3
15
So when this is presented in the cube, the 3 items with values are correctly presented but my problem is that the "Customer Group" doesnt show against record 1 (the parent). In usual circumstances my users will not expand the hierarchy, i
just want the associated row value shown.
Does this make more sense? I hope so, and i hope somebody can help me resolve it.
Thanks,
Dom -
No data for Parent-child hierarchy column in Pivot table view
Hi all,
I used OBIEE 11.1.1.6.2 Version.
I drag one Parent-child hierarchy column and one measure and show result with a pivot table view.
But when I click "+" icon to show detail level data,
It messaged that: "*the layout of this view combined with the data,selections,drills,or prompt values chosen resulted in no data*."
But it can show every-level data when I used table view.
It was so strange..
Did anybody meet this before?
Thanks in advance.
regards,
AnneHi,
Yes, I have the same problem with pivot table for hierarchy dimension.
If you use a normal table (not pivot) it seem to work. Unfortunatley with restrictions as normal table view have.
Same problem still exist in 11.1.1.6.5
I have logged a SR to Oracle about this. -
Parent Child Hierarchy Issue in OBIEE 11g
Hi All,
I am in OBIEE 11G v6. I have a sales fact table where the grain is one sale. So I have one row for every sale done.
Now I have a ragged employee hierarchy like this with David at the root node.
David >>Richard>>Sean
David >>James
Also, I have a role dimension which gives me what role each employee has performed on a sale. Only one employee can be associated with one sale. This is the way Roles have been asssigned
David = Manager
Richard = Off1
Sean = Off2
James = Off2
Both Sean and James can have same Roles. Now I have created a parent child hierarchy for my employee dimension and the closure table. Defined the member key, ancestor key relationship in the parent child setting etc.
Now in the report when I pull the parent child hierarchy and the sales_amount in the report, it comes out perfect with all the ragged hierarchy resolved. But the issue comes when I try to limit the report on Role = Off2. It gives me an error saying " The layout of this view combined with the data, selection , drills resulted in no data. Undo drill and view prompt values". Basically what i want is to be able to select any role type and then my hierarchy should be adjusted to show me that data. Like when I select Off2, I want to see David at the Top level and Sean and James under him because they are both Off 2 and David is their manager.
Is that possbile? Also, am I getting this error because when I select Off2 though it gets Sean and James but since David is not Off2, I don't get the data?
I hope I was able to explain the issue, any help on this would be greatly appreciated.
Thanks
RonnySo basically this means that if I build a parent child hierarchy on table A having the stucture like
--David (Manager)
-----James (Off1)
--------Bill (Off2)
and in my sales fact table for let's say today, I have only rows for Bill (Off2) because he is the only officer who did the sales today. Now when I will join my fact table to parent child hierarchy table A I will NOT get any data ? because there is no James who is the parent of Bill. So obiee need to have parent pulled off in the data (ANCESTOR) to be able to roll up the child.(IS_LEAF = 1)
I testes this and if my data only contains only rows for Bill (or I limit on ROLE = Off2) then it won't show the hierarchy. The query which OBIEE fires is to look for either ANCESTOR_KEY = NULL OR (DISTANCE = 1 AND ANCESTOR KEY IN (Bill). Therefore it doesn't I am wondering then what is the use of builiding the parent child hierarchy when we need to pull in all the ancestors (like in this case James for bill and David for james) because in real scenarios there can be cases wherein we would want to filter the data based on other dimensions to which the parent child hierarchy joins ? -
Parent Child Hierarchy for Type 2
I have read the articles on Parent Child hierarchy setup in OBIEE 11g, however, most are based on what seems to be a current snapshot of the Employee-Manager relationship. Has anyone tried to build out a Parent-Child hierarchy/table off a Type 2 dimension. Being able to navigate what the hierarchy may have been on a specific date.
I would welcome any feedback, thanks.Hi,
Thanks for the reply, I'm actually using snapshots. But even with the Type 2 Dim I don't think it will work.
When OBIEE generates the very first sql against the Parent-Child table the fact table is not included in the query. It seems to create 2 queries - one to find the top level parent (ancestor key is null) and then one to find all the leaf nodes.
It does not have any join to the fact table when it does this. So if you have multiple rows in the table (with date stamps) for a single row (person in this case) - it picks up both rows. Therefore, when you have a person who was, say, promoted to manager, and WAS a leaf node, and is now a manager, they show up in the leaf query and don't display in the hierarchy as a manager.
Once it has the leaf nodes and it joins to the fact table everything works (ie the surrogate key join).
I'm trying to figure out if there is any way to influence those initial queries against the parent-child table.
Hopefully that made sense.
Thanks,
Tori -
Parent-Child hierarchy based on two-column key
Hello
Is it possible to create a parent-child hierarchy, if the primary key of the table consists of two columns?
My table looks like:
TRACE_ID | DIAG_ID | SUPER_DIAG_ID
with TRACE_ID and DIAG_ID as PK.
If I define only DIAG_ID as PK, I can add a logical dimension (PC-hierarchy) without problems.
However when I also add TRACE_ID to my PK, I cannot select a member key in the new logical dimension window and therefore not create a logical dimension.
Is this a limitation of OBIEE and I have to merge the two colums (which would be rather bad, as there are FK relations to DIAG_ID) or is there a solution?
Regards
MatthiasDear Gowtham ,
I am very well aware of the level based hierarchy available in BO .
The issue that i have raised is all about the Parent Child Hierarchy which creates the recursive query.
I.e Every Parent has a child and that child can be parent of some other . (See the original example for more illustration) -
OBIEE 11g Parent Child hierarchy
Hi,
I'm trying to setup a parent-child hierarchy dimension. I have setup a new hierarchy dimension using numeric keys but want to display another field in the hierarchical column on a report e.g. employee fullname & not the member_key based on a numeric value. Can this be done & how do you do it? All the examples I have seen use varchar2 type columns as the keys to do this.
Thanks in advance, Phil
My Setup
=============
Dimension - logical level
===============
member key = employee_id
parent-child table source
===============
member key = employee_id
parent key = supervisor_id
relationship distance = levels_removed
leaf node identifier = isleaf
Employee logical folder
==============
employee_id ( number)- primary key
full_name (varchar2) - unique key
supervisor_id ( number)
Closure table
=========
employee_id ( number)
supervisor_id ( number)
level ( number)
isleaf ( number)Thanks for the link Suresh but the aggregations are working correctly.
My problem is only at the display level. I need to create a dashboard that displays the complete hierarchy.
So for example if I have this hierarchy:
- Steven King
- Adam Frip
Alexis Bull
Anthony Cabrio
Alberto Erraruriz
Den Raphaely
I want the dashboard to display immediately that complete hierarchy. If someone adds a member to the hierarchy in the database, the dashboard should display this new member without having to manually modify the dashboard.
- Steven King
- Adam Frip
Alexis Bull
Anthony Cabrio
- Alberto Erraruriz
Mozhe Atkinson
Den Raphaely
Also, if I just manually open the hierarchy and save the dashboard, if "Steven King" is replaced by "Shanta Vollman", the dashboard doesn't like it and returns a result looking like:
- Adam Frip
Alexis Bull
Anthony Cabrio
- Alberto Erraruriz
Mozhe Atkinson
Den Raphaely
+ Shanta Vollman
So I'm looking for some option that will tell OBIEE to open the hierarchy without having to specify "Drill down on member "Steven King"", "Drill down on member "Adam Frip"...
I hope I'm explaining correctly... -
Script populate parent-child hierarchy not running
Hallo guys
I have problem when running script populate Parent-Child Relationship Table.
Here is the script.I don't even change the script.just run it in PL/SQL
declare
v_max_depth integer;
v_stmt varchar2(32000);
i integer;
begin
select max(level) into v_max_depth
from V_D_BRANCH
connect by prior BRANCH_KEY=PARENT_BRANCH_KEY
start with PARENT_BRANCH_KEY is null;
v_stmt := 'insert into DM_ANALYTICS.BRANCH_HIERARCHY (MEMBER_KEY, ANCESTOR_KEY, DISTANCE, IS_LEAF)
select BRANCH_KEY as member_key, null, null, 0 from V_D_BRANCH where PARENT_BRANCH_KEY is null
union all
select member_key,
replace(replace(ancestor_key,''\p'', ''|''), ''\'', ''\'') as ancestor_key,
case when depth is null then 0
else max(depth) over (partition by member_key) - depth + 1
end as distance, is_leaf
from
select member_key,depth,
case when depth is null then '' || member_key
when instr(hier_path, ''|'', 1, depth + 1) = 0 then null
else substr(hier_path, instr(hier_path, ''|'', 1, depth) + 1, instr(hier_path, ''|'', 1, depth + 1) - instr(hier_path, ''|'', 1, depth) - 1)
end ancestor_key,
is_leaf
from
( select BRANCH_KEY as member_key, PARENT_BRANCH_KEY as ancestor_key, sys_connect_by_path(replace(replace(BRANCH_KEY, ''\'', ''\''), ''|'', ''\p''), ''|'') as hier_path,
case when BRANCH_KEY in (select PARENT_BRANCH_KEY from V_D_BRANCH ) then 0 else 1 end as IS_LEAF
from V_D_BRANCH
connect by prior BRANCH_KEY = PARENT_BRANCH_KEY
start with PARENT_BRANCH_KEY is null
( select null as depth from dual;
for i in 1..v_max_depth - 1 loop
v_stmt := v_stmt || union all select '' || i || '' from dual;
end loop;
v_stmt := v_stmt || ) )
where ancestor_key is not null;
execute immediate v_stmt;
end;
but I got errors like following:
Error report -
ORA-06550: line 19, column 12:
PLS-00103: Encountered the symbol "insert into DM_ANALYTICS.BRANCH_HIERARCHY (MEMBER_KEY, ANCESTOR_" when expecting one of the following:
( - + case mod new not null <an identifier>
<a double-quoted delimited-identifier> <a bind variable>
continue avg count current exists max min prior sql stddev
sum variance execute forall merge time timestamp interval
date <a string literal with character set specification>
<a number> <a single-quoted SQL string> pipe
<an alternatively-quoted string
06550. 00000 - "line %s, column %s:\n%s"
*Cause: Usually a PL/SQL compilation error.
*Action:
what should I do guys?any idea,any solution would be appreciated.thanks alot guys956850 wrote:
hi,
i tried making "Dimension with Parent-Child Hierarchy" as described in your tutorials.
i finished with the admin tool and database changes and with no errors.
when trying to create a new answer, by only puting the hierarchy column in the answer.
the result show "no result" exist.
i am not sure what i am doing wrong. maybe you can point me to the problem?
thanks
Mirit.Hi Mirit,
What is the table that you created hierarchy on?
Which column in the hierarchy you pulled into your reports to see the No Result message?
Please query the table and see if has data.
Thanks,
G. SK -
Parent Child Hierarchy in OBIEE 11G
Hi All,
I am working on the parent child hierarchy in OBIEE 11g Source ESSBASE ..followed some of the blogs.
http://www.rittmanmead.com/2010/07/obiee-11gr1-enhancements-to-essbase-support/
I followed the following steps.
1.Imported the Cubes from ESSBASE.
2.Selected Accounts Hirearchy and changed the Hierarchy type to Value.
3.Dragged the subject area to BMM and to Presentation.
4.Now when i checked the Account Hierarchy from in the dashboard its not drilling down.
If i change the Hierarchy type to Unbalanced ...then the Account hiearchy is working fine.
Is there is any settings or process i have to follow..inorder to implement the Value based Hierarchy in OBIEE 11G source ESSBASE.
ThanksSo basically this means that if I build a parent child hierarchy on table A having the stucture like
--David (Manager)
-----James (Off1)
--------Bill (Off2)
and in my sales fact table for let's say today, I have only rows for Bill (Off2) because he is the only officer who did the sales today. Now when I will join my fact table to parent child hierarchy table A I will NOT get any data ? because there is no James who is the parent of Bill. So obiee need to have parent pulled off in the data (ANCESTOR) to be able to roll up the child.(IS_LEAF = 1)
I testes this and if my data only contains only rows for Bill (or I limit on ROLE = Off2) then it won't show the hierarchy. The query which OBIEE fires is to look for either ANCESTOR_KEY = NULL OR (DISTANCE = 1 AND ANCESTOR KEY IN (Bill). Therefore it doesn't I am wondering then what is the use of builiding the parent child hierarchy when we need to pull in all the ancestors (like in this case James for bill and David for james) because in real scenarios there can be cases wherein we would want to filter the data based on other dimensions to which the parent child hierarchy joins ? -
I have an Employees dimension that contains a parent-child hierarchy as the supervisor->employees (Org. chart. starts from the CEO to the lowest level of employees). The hierarchy is built on a relation between the employee_id (as the primary and
surrogate key) and supervisor_id (as a foreign key). There are many other attributes in this dimension one of them is the Termination_Date. The value for Termination_Date for the current employees in the source
system is "1800-01-01 00:00:00.000" (which is also the default value). The weird thing is that keeping this value in the employee dimension will cause the previously mentioned parent-child hierarchy to show nothing! if I change it to any other
value or NULL, the hierarchy works fine and shows the expected tree of employees!
I can change "1800-01-01 00:00:00.000" to Null in the ETL stage and solve the problem, but I want really to know what causes this ? why ?!I have an Employees dimension that contains a parent-child hierarchy as the supervisor->employees (Org. chart. starts from the CEO to the lowest level of employees). The hierarchy is built on a relation between the employee_id (as the primary and
surrogate key) and supervisor_id (as a foreign key). There are many other attributes in this dimension one of them is the Termination_Date. The value for Termination_Date for the current employees in the source
system is "1800-01-01 00:00:00.000" (which is also the default value). The weird thing is that keeping this value in the employee dimension will cause the previously mentioned parent-child hierarchy to show nothing! if I change it to any other
value or NULL, the hierarchy works fine and shows the expected tree of employees!
I can change "1800-01-01 00:00:00.000" to Null in the ETL stage and solve the problem, but I want really to know what causes this ? why ?! -
Guys,
I have a parent-child hierarchy and users would select a randomn level from the prompt (Hierarchical column used in the prompt). So for the level selected I need to capture all the leaves and put a top n function on them.. Any ideas??
Things that i have tried are using Selection steps with hierarchical columns.
Step 1: Start with all Memebers
New step: Step 2 is Selected Members based on hierarchy relation Ship (Keep only members of leaves of hierarchy)
But the problem is I am not able to override the Step -2 with dashboard prompt. I was able to do only fior STEP -1
So any ideas??
If i can atleast capture all the leaves of selecte level from the prompt that would solve my problem to a large extent?/ Thought abt Hierarchical Navigation Functions but didnt succeed?? Any suggestions really appreciated
Thanks..
Prash
Edited by: Prash11 on Aug 6, 2012 11:14 AMI have got lot of hierarchies which are atleast 20 levels deep. So its not really feasible for me to create multiple views for multiple levels.
I tried to use hierarchical column functions and it works but not able to override the values from prompts in the selection steps. So still trying few things
Step 1: Start with All members (over ride with prompt checked)
Step 2: Select a level with in the hierarchy and Keep only leaves of the selected level
Step 3: Apply Condition do a TOP 10 and keep only that result set.
This works fine with out any issues from an ad-hoc stand point. Only problem there is no way for me to over ride the dashboard prompt value in Step - 2 as it expects me to select a value from the hierarchy. Any alternativeS? -
Except function with parent child hierarchy using mdx query
HI,
I need to remove some items using mdx query in parent child hierarchy.
I tried with below query,it is not removeing ,could you please help me.
SELECT
{[Measures].[Amount]} ON
COLUMNS
NonEmpty([Account].[Accounts].[Account Level 01],[Measures].[Amount])
ON ROWS
FROM (SELECT
-Descendants({[Account].[Accounts].&[47]},,Leaves)
} ON COLUMNS
FROM [Adventure Works])
induHi Indu,
Why do you remove some itmes using
Descendants function? Generally, we use FILTER function to achieve the requirement.
WITH SET [CustomAccounts] AS
FILTER ([Account].[Accounts].[Account Level 01].Members , [Account].[Accounts].CurrentMember.Name<>'Net Income')
SELECT {[Measures].[Internet Sales Amount]} ON 0
[CustomAccounts] ON 1
FROM [Adventure Works]
WITH SET [CustomAccounts] AS
FILTER ([Account].[Accounts].[Account Level 01].Members , [Account].[Accounts].CurrentMember.Name='Net Income')
SET [RemainingAccount] AS
[Account].[Accounts].[Account Level 01]- [CustomAccounts]
SELECT {[Measures].[Reseller Sales Amount]} ON 0
[RemainingAccount] ON 1
FROM [Adventure Works]
Results.
References.
http://www.databasejournal.com/features/mssql/article.php/3306101/MDX-Essentials-Basic-Set-Functions-The-Filter-Function.htm
http://social.msdn.microsoft.com/Forums/sqlserver/en-US/c0149678-97f2-4066-903f-7f9e9ff09b56/filtering-out-dimension-members-with-mdx?forum=sqlanalysisservices
Regards,
Charlie Liao
If you have any feedback on our support,
please click here.
Charlie Liao
TechNet Community Support
Maybe you are looking for
-
Stupid question: my top 'dock' is not displayed on the screen. How do I get it back and what is it called? It's just annoying that I have to reach high for it!
-
How do I prevent iCal from auto filling in my times?
Whenever I enter an event into iCal - I put in the time of the event - iCal then takes that time and makes it disappear (by assuming I don't want to see it on my text message, but instead inputs it as data into the actual iCal event). So if I type in
-
HOW DELTA WORKS IN FI MODULE?FI_AR,FI_AP
HOW DELTA WORKS IN FI MODULE?FI_AR,FI_AP
-
i, Please tell me the link for OracleBAM 11.1.1.1.0 and enterprise manger 11g download.Is it comes with BPEL or it is independent or it supports integration for SOA thanks Edited by: rider on May 16, 2011 5:31 AM
-
My Magic Mouse doesn't scroll vertically after installing Lion.
Prior to installing Lion, I frequently turned the 'Scrolling' option off and on in the Mouse page of System Preferences. This is because my little boy plays minecraft on this mac and he kept accidentally scrolling while using the mouse, so when he pl