Tacacs+ access issue with ASA firewall after integrating with RSA SecureID
Hi,
In my earlier post, I raised the same question but let me rephrased it again. I have configured TACACS+ in cisco ASA firewall and able to access . But when I integrated it with RSA secure ID , I am not able to enter in enable mode. It is not accepting enable password nor RSA passcode. I have created enable_15 in ASA , ACS and RSA server but no luck.
Did any one face similar issue with ASA access ?
Rgds
Siddhesh
Hi Siddesh,
In order to help you here, I need to know few things:
1.] Show run | in aaa
2.] When you enter enable password on ASA CLI, what error do you see on ACS > Monitoring and reports > AAA protocols > tacacs authentication > "look for the error message"
3.] Turn on the debugs on ASA "debug tacacs" and "debug aaa authentication" before you duplicate the problem.
~BR
Jatin Katyal
**Do rate helpful posts**
Similar Messages
-
The problem with forecast reports in SCOM 2012 after integration with VMM 2012
Hello.
I have problem with forecast reports in SCOM 2012 after integration with VMM 2012. All other reports (not forecasting) works fine. For example, report “Host Group Forecasting” don’t work. The report is generated, but I have error: “Subreport
could not be shown”. I find only errors in SQL Server Reporting logs like this:
library!ReportServer_0-13!1758!06/26/2012-18:26:23:: i INFO: RenderForNewSession('/Microsoft.SystemCenter.VirtualMachineManager.2012.Reports/Microsoft.SystemCenter.VirtualMachineManager.2012.Report.ForecastHostGroup')
processing!ReportServer_0-13!1758!06/26/2012-18:26:28:: e ERROR: Throwing Microsoft.ReportingServices.ReportProcessing.ReportProcessingException: , Microsoft.ReportingServices.ReportProcessing.ReportProcessingException: Не удалось выполнить
запрос для набора данных "DiskSpaceUsageForecasting". ---> Microsoft.AnalysisServices.AdomdClient.AdomdErrorResponseException: Execution of the managed stored procedure GetTimeSeriesForecast failed with the following error: Exception has been thrown by
the target of an invocation..
Query (5, 58) Parser: The syntax for '6' is incorrect.
at Microsoft.AnalysisServices.AdomdClient.AdomdConnection.XmlaClientProvider.Microsoft.AnalysisServices.AdomdClient.IExecuteProvider.ExecuteTabular(CommandBehavior behavior, ICommandContentProvider contentProvider,
AdomdPropertyCollection commandProperties, IDataParameterCollection parameters)
at Microsoft.AnalysisServices.AdomdClient.AdomdCommand.ExecuteReader(CommandBehavior behavior)
at Microsoft.AnalysisServices.AdomdClient.AdomdCommand.System.Data.IDbCommand.ExecuteReader(CommandBehavior behavior)
at Microsoft.ReportingServices.DataExtensions.AdoMdCommand.ExecuteReader(CommandBehavior behavior)
at Microsoft.ReportingServices.OnDemandProcessing.RuntimeDataSet.RunEmbeddedQuery(Boolean& readerExtensionsSupported, Boolean& readerFieldProperties, List`1 queryParams, Object[] paramValues)
--- End of inner exception stack trace ---;
The Russian string “Не удалось
выполнить запрос для набора данных "DiskSpaceUsageForecasting"” is translated to “Could not execute query for data set "DiskSpaceUsageForecasting"”.
I have clean installation SCOM 2012 RU1, VMM 2012 RU1. Integration SCOM with VMM work fine.
SQL collation for all SQL DB instances (SCOM and VMM and SCOM reporting) – “SQL_Latin1_General_CP1_CI_AS”
SQL Analysis service: SQL collation – “Latin1_General” ; language for the server – English (United States)
I think the problem in regional settings. By my opinion there are two possible mistakes:
SQL collation for all SQL DB instances. May be need use “Latin1_General_CI_AS”
as provided by
http://blogs.technet.com/b/momteam/archive/2012/05/25/clarification-on-sql-server-collation-requirements-for-system-center-2012.aspx
Need change regional setting. Question is for what (OS regional setting, SQL Analysis service settings,…) ?Error: Subreport could not be shown
Opening a report for Client Security might result in the following error being displayed in one or more areas of the report: "Error: Subreport could not be shown."
Background
There are two possible reasons for this error:
1. Wrong location The reporting server is pointing to the wrong computer running SQL Server or a SQL Server instance.
2. Insufficient permissions The account configured (in SQL Server Reporting Services) to connect to the reporting database does not have appropriate permissions for the database.
Solution
To determine which reason is causing the error, attempt to directly open the subreport reporting the error, by clicking the name of the subreport.
If the reporting server is pointing to a wrong location, the report displays an error similar to the following:
Error message
An error has occurred during report processing.
Cannot create a connection to data source 'SystemCenterReporting'. Cannot open database "SystemCenterReporting" requested by the login. The login failed. Login failed for user username.
To verify the correct SQL Server computer and instance path
In Report Manager, navigate to the report generating the error and click the Properties tab.
Click Data Sources and under a Shared data source, note the path.
Open the reporting Web site. If you chose the default virtual directory for reports, the URL is: http://hostname/Reports/
If you chose to secure the viewing of reports with HTTPS, the URL is: https://hostname/Reports/
Click SCDW.
In the Connection type list, ensure that Microsoft SQL Server is selected.
In the Connection string box, ensure that the correct SQL Server computer and instance name are entered.
Note:
A period (.) denotes the local computer.
If the account has insufficient permissions, the report displays an error similar to the following:
Error message
An error has occurred during report processing. (rsProcessingAborted) Query execution failed for data set 'DSDashboardComputersTrend'. (rsErrorExecutingCommand) EXECUTE permission denied on object 'prSAS_UX_DashboardComputersTrend', database 'SystemCenterReporting',
schema 'dbo'.
To determine if you are experiencing the SQL Server permissions issue
Open the reporting Web site. If you chose the default virtual directory for reports, the URL is:http://hostname/Reportserver/
If you chose to secure the viewing of reports with HTTPS, the URL is:https://hostname/Reportserver/
Click Microsoft Operations Manager Reporting, click Microsoft Forefront Client Security, and scroll to DashboardComputersTrend.
Click DashboardComputersTrend.
If you are experiencing a SQL Server permissions issue, an error similar to the preceding error appears.
To grant permissions to the SQL Server computer
1. In Report Manager, click SCDW and note the account in the Connect using section. This is the account under which the database is contacted.
2. On the server with the System Center Reporting database, start SQL Server Management Studio.
3. In the tree, expand Security, and then expand Logins. Do one of the following:
If the user account is listed, right-click the account, click Properties, and then go to step 5.
If the user account is not listed, right-click Logins and choose New Login.
4. In the Login name box, enter the user account (domain\username).
5. In the Login Properties dialog box, click User Mapping, and then under Users mapped to this login, select the System Center Reporting check box.
6. Under Database role membership for: System Center Reporting, select the db_owner check box, and then click OK.
Thanks,
Yog Li
TechNet Community Support -
LMS 3.1 Slow after integrating with ACS
Dear All, have any one faced issue of slowness after integrating LMS3.1 with ACS4.2. I dont know how can I resolve this issue. Is there any patch to resolve it...
Any kind of help will be very helpful.I'm using LMS 3.2 into ACS 4.0 and it actually seemed a bit faster after ACS integration. Nothing I measured but subjectively it seems faster. Both my servers are on Windows and the ACS is across the WAN from my CiscoWorks.
How do your devices fare with their ACS? You can debug tacacs at the router/switch level as one tool. I'm sure one of the cisco guys on here will point you to one of the many logs that LMS generates, possibly with debugging activated, to dig deeper there also. -
How Can i Use two Different Public IP Addresses no my DMZ with ASA Firewall.
How To Using Two Different Public IP Address on My DMZ with ASA 5520
Postado por jorge decimo decimo em 28/Jan/2013 5:51:28
Hi everyone out there.
can any one please help me regarding this situation that im looking for a solution
My old range of public ip address are finished, i mean (the 41.x.x.0 range)
So now i still need to have in my DMZ another two servers that will bring some new services.
Remember that those two server, will need to be accessable both from inside and from outside users (Internet users) as well.
So as i said, my old range of public ip address is finished and we asked the ISP to gives some additional public
ip address to address the need of the two new servers on DMZ. and the ISP gave us the range of 197.216.1.24/29
So my quation is, on reall time world (on the equipment) how can i Use two different public ip address on the same DMZ
on Cisco ASA 5520 v8??
How my configuration should look like?
I was told about implementing static nat with Sub Interfaces on both Router and ASA interface
Can someone please do give me a help with a practical config sample please. i can as well be reached at [email protected]
attached is my network diagram for a better understanding
I thank every body in advance
JorgeHi,
So looking at your picture you have the original public IP address range configured on the OUTSIDE and its used for NAT for different servers behind the ASA firewall.
Now you have gotten a new public IP address range from the ISP and want to get it into use.
How do you want to use this IP address range? You want to configure the public IP addresses directly on the servers or NAT them at the ASA and have private IP addresses on the actual servers (like it seems to be for the current server)?
To get the routing working naturally the only thing needed between your Router and Firewall would be to have a static route for the new public network range pointing towards your ASA OUTSIDE IP address. The routing between your Router and the ISP core could either be handled with Static Routing or Dynamic Routing.
So you dont really need to change the interface configuration between the Router and ASA at all. You just need a Static route pointing the new public IP address towards the ASA outside IP address.
Now when the routing is handled between the ISP - ISP/Your Router - Your Firewall, you can then consider how to use those IP addresses.
Do you want to use the public IP addresses DIRECTLY on the HOSTS behind the firewall?This would require you to either configure a new physical interface with the new public IP address range OR create a new subinterface with the new public IP addresses range AND then configure the LAN devices correspondingly to the chosen method on the firewall
Do you want to use the public IP addresses DIRECLTY on the ASA OUTSIDE as NAT IP addresses?This would require for you to only start configuring Static NAT for the new servers between the inside/dmz and outside interface of the ASA. The format would be no different from the previous NAT configuration other than for the different IP addresses ofcourse
Of the above ways
The first way is good because the actual hosts will have the public IP addresses. Therefore you wont run into problems with DNS when the LAN users are trying to access the server.
The second way is the one requiring the least amount of configurations/changes on the ASA. In this case though you might run into problem with DNS (to which I refer above) as the server actually has a private IP address but the public DNS might reply to the LAN hosts with a public IP address and therefore connections from LAN could fail. This is because LAN users cant connect to the servers OUTSIDE NAT IP address (unless you NAT the server to public IP address towards LAN also)
Hopefully the above was helpfull. Naturally ask more specific questions and I'll answer them. Hopefully I didnt miss something. But please ask more
I'm currently at Cisco Live! 2013 London so in the "worst case" I might be able to answer on the weekend at earliest.
- Jouni -
Has anyone had issues with their music volume after syncing with iCloud ?
There have been several posts here and on the iphone site about this.
The jury is still out what the fix will be. Some posts say it's a problem with the metadata and the orientation data contained there-in. I can not confirm that.
I do know that when I take a landscape screen snap, the orientation is wrong when I email or upload the photo to my computer. -
Cisco BE6k with CUCM 10.X integration with Siemens with Hipath 3350 and 3550
Dear Experts;
We have one requirment from customer.
They have 4 branches with Siemens Hipath 3350 and 3550 PBX and they want to integrate with cisco CUCM 10.x.
The Head Quater with complete CUCM as IPT and branches with with Hipath 3350 and 3550 PBX.
CIsco TAC says interoperability doc is not available and also I can see tehre is no doc.
TAC Reply As below.
We do not have any documents about CUCM integration with Hipath 3350 and 3550 on our interoperability portal. This means that their integration with CUCM was never properly tested. So we can not confirm that all features will be working. But from CUCM perspective this is third-party device that can be integrated using SIP or ISDN (with Voice Gateway between them).
Link for interoperability portal:
http://www.cisco.com/c/en/us/solutions/enterprise/interoperability-portal/networking_solutions_products_genericcontent0900aecd805b561d.html#callmgr10
Regards
DebashisIf the Siemens supports SIP or H323 you can attempt to simply create a trunk between the systems and route calls via it. If IP integration is not an option then as pointed by TAC integrate via PRI circuit (preferably QSIG). From CUCM side it will be just another GW, similarly from Siemens side. You'll need to select which side is going to be ISDN network (I always use Cisco side) and then make the other side user.
-
Issue in rendering the characters in pdf after integrating with jdeveloper
hi all,
i have a strange problem, i have get the jar files of the bi publisher and integrated it with the jdeveloper 11g and it's workin great in viewing reports in all format except the pdf format because we are working on a project in the middle east so we need to render arabic letters, the arabic letters rendered correctly on all formats except in pdf it renders "????? ??? " only question marks, but the strange issue that when we are using the bi publisher desktop and preview the reports in pdf format it renders correctly so we don't know what's wrong right now.... any idea
hope for help, our customer will kick our ass if we don't do this arabic reports
thanxHi
I am also having the same issue, could you please let me know how to display arabic characters properly in pdf. I am using the following java code to generate the PDF using xml publisher java API..
try { // Convert RTF to XSL-FO
InputStream rtfInputStream = new FileInputStream(
"C:\\ebpp\\template\\BillTemplate.rtf");
RTFProcessor rtfProcessor = new RTFProcessor(rtfInputStream); // input
// template
rtfProcessor.setOutput("C:\\ebpp\\xsl\\XslBillTemplate.xsl"); // output
// file
rtfProcessor.process();
// Create XSL-FO objects for multiple XML input streams
InputStream[] in = new InputStream[1];
InputStream xmlInputStream = new FileInputStream(
"C:\\ebpp\\xml\\192359_B1-533.xml");
Reader xmlReader = new InputStreamReader(xmlInputStream, "UTF-8");
InputStream xslInputStream = new FileInputStream(
"C:\\ebpp\\xsl\\XslBillTemplate.xsl");
Reader xslReader = new InputStreamReader(xslInputStream, "UTF-8");
InputStream fFOStream = FOUtility.createFO(xmlReader, xslReader);
Array.set(in, 0, fFOStream);
// FOUtility.createFO
// FileInputStream
// Generate the merged FO
InputStream mergedFOStream = FOUtility.mergeFOs(in, null);
Reader mergedReader = new InputStreamReader(mergedFOStream, "UTF-8");
if (mergedFOStream == null) {
System.out.println("Merge failed.");
// Create FO Processor
FOProcessor processor = new FOProcessor();
processor.setData(mergedReader);
processor.setTemplate((String) null);
// FORMAT_EXCEL , FORMAT_HTML, FORMAT_RTF , FORMAT_PDF
// Set the format
processor.setOutput("C:\\ebpp\\pdf\\192359_B1-533.pdf");
processor.setOutputFormat(FOProcessor.FORMAT_PDF);
processor.generate();
} catch (XDOException xe) {
System.out.println(" XDOException " + xe.getMessage());
} catch (Exception e) {
System.out.println(" Exception " + e.getMessage());
Please reply me back .. -
Unable to configure Outlook with ASA firewall and IWSVA
Dear Sir,
We are unable to configure MS outlook in our network which is having IWSVA proxy and cisco ASA 5510 firewall.
snapshot of outlook error details are attached for your reference.
In our network L3 is behind IWSVA which is behind cisco ASA 5510.
when we change following NAt rule and ACL incoming rule it works fine
nat (inside,outside) source static any interface unidirectional
nat (inside,outside) source static obj_Proxy interface unidirectional
access-list 100 extended permit ip any any
access-list inside_access_in extended permit ip object-group Proxy_Server any
all required ports are allowed in IWSVA also please tell me if we have to make any changes in IWSVA like mapping ports etc.
Thanks in advance
Regards:
Anand Singh DhouniHello Anand,
I already replied to you on the other post, Please mark this as answered so we can focus on one ticket and avoid duplicates.
For more information about Core and Security Networking follow my website at http://laguiadelnetworking.com
Any question contact me at [email protected]
Cheers,
Julio Carvajal Segura -
How can we allow internal users to access internet through ASA firewall?
Hello,
I am new to security track, i have been asked to setup lab and allow users from inside firewall to access internet. here is my lab setup
PC -> switch 1 (layer2) -> (inside) ASA (outside) -> switch 2 (Layer2) -> Router
does switch 2 port needs internet access through router?
what configuration required on ASA to allow users behind the firewall to access internet?
any help on this would be much appreciated.
thanks,Hi,
Okay , can you clarify on this for me. Are you able to ping the internet from the ASA outside interface ?
Just try something like this:-
ping 4.2.2.2 .. Does this work ?
If this does not work , then i think the ASA even is not able to get to the internet and that would be a problem on the router.
Also , internet from Switch 2 is not a requirement as that is only a Layer 2 device.
You can assign the ISP allocated address on the PC , connect it to the Switch 2 port and then try to ping something on the internet or surf internet and i think that should work.
Thanks and Regards,
Vibhor Amrodia -
Command key issues with some apps after highlighting with trackpad
When I attempt to use command-c to copy from Microsoft Office or Lotus Notes I often get nothing. I've gotten in the habit of pressing command-c 2 or 3 times to make sure I got it. Its not physical keyboard issue since I do not have this problem with other apps and I tested a BT keyboard as well. I've noticed that other command key sequences also get dropped, e.g. command-u for underline. I've also had the delete key get dropped. It feels like Office and Notes are just to slow to respond and somehow lose the key, this frequently happens after I highlight something and quickly press command-something.
I used tap to touch. If I tap tap drag tap then command-whatever it appears to work. But tap tap drag command-whatever does not appear to terminate the drag. Is there a way to make Office/Notes react faster? Or tune the touch pad? Hack OS/X?
Thanks.And after all is said and done, you may very well need to restore the device as new and start from the beginning again, especially if the glitch is contained in your previous backup. Restoring from that backup (if it contains the glitch) will also restore the glitch. This is the reason for possibly restoring as new.
Make note of all your Settings (write them all down, preferably using a PC/notepad type program), backup all your music & apps and any other important information you will lose by restoring as new. As far as text messages go, you may not be able to back those up manually (I believe you can but you'd need to purchase additional software for the PC/Mac) and will likely lose them. -
Issue in BI 7.0 integration with SRM 5.0
Hi All,
We are trying to integrate SRM 5.0 with BI 7.0. I have activated all the business content reports and was trying to check the validity in Business Analyzer. When i hit <b>check</b> i get the following error in Query Designer:
<b>System Error in program SAPLRRI2 and form CUDIM_FUELLEN_QUELL-01-</b>
I tried looking up in Notes but could not find any related matching. Can someone help me out on this ASAP...
ThankyouHi,
Try to Translate to English apply below the Note:
Hinweis 989064 - X299 Brain im SAPLRRI2; Form CUDIM_FUELLEN_QUELL-01-
Hinweissprache: Deutsch Version: 1 Gültigkeit: gültig seit 12.10.2006
Zusammenfassung
Symptom
Beim Prüfen oder Generieren einer Query kommt es zum Abbruch X299(BRAIN) Systemfehler: Program SAPLRR2; FORM CUDIM_FUELLEN_QUELL-01-
Weitere Begriffe
Query Währungsumrechnung
Ursache und Voraussetzungen
Die Query benutzt eine Währungsumrechnungsart (CTTNM) in der eine Zielwährung eingetragen ist, die nicht existiert.
Lösung
Mit der Korrektur wird die X-Message durch die gezielte Abbruchmeldung Brain A 288 ersetzt.
BW 3.0B / BW 3.10 Content
Bitte verwenden Sie die angegebene Korrekturanleitung. Für die SAP BW Releases 3.0B und 3.10 werden bis auf weiters keine Support Packages mehr ausgeliefert.
BW 3.50
SpielenSie das Support Package 20 für 3.5 (BW3.50-Patch20 bzw. SAPKW35020) in Ihr BW-System ein. Das Support Package ist verfügbar, wenn der Hinweis 0986891 mit dem Kurztext "SAPBWNews BW SP20 NetWeaver'04 Stack 20" für Kunden freigegeben ist, der dieses Support Package näher beschreibt.
BW 7.0
SpielenSie das Support Package 11 für 7.0 (BW7.0-Patch11 bzw. SAPKW70011) in Ihr BW-System ein. Das Support Package ist verfügbar, wenn der Hinweis 0914305 mit dem Kurztext "SAPBWNews BW 7.0 SP11" für Kunden freigegeben ist, der diesen Support Package näher beschreibt.
In dringenden Fällen kann die Korrekturanleitung verwendet werden.
Vorher sollten unbedingt die Hinweise 932065, 935140, 948389, 964580 und 969846 zur Transaktion SNOTE eingebaut sein, da es sonst beim Ausbauen einiger Hinweise zu Problemen und Syntax-Fehlern kommen kann.
Die genannten Hinweise können bereits vor der Freigabe des Support Packages verfügbar sein, um vorab Informationen zur Verfügung zu stellen. In diesem Fall enthält der Kurztext allerdings noch das Wort "Vorabversion".
Kopfdaten
Freigabestatus: Für Kunden freigegeben
FREIGEGEBEN AM: 12.10.2006 10:12:19
PRIORITÄT: Korrektur mit geringer Priorität
KATEGORIE: Programmfehler
HAUPTKOMPONENTE: BW-BEX-OT-OLAP-HIER Hierarchiebenutzung
ZUSÄTZLICHE KOMPONENTEN: BW-BEX-OT OLAP-Technologie
Releases
Software
komponente Release Von
Release bis
Release Und
folgende
SAP_BW 30 30B 30B
SAP_BW 310 310 310
SAP_BW 35 350 350
SAP_BW 70 700 700
SAP_BW_VIRTUAL_COMP 30 350 30B 30B
SAP_BW_VIRTUAL_COMP 70 710 700 700
Support Packages
Support
Packages Release Package
Name
SAP_BW 700 SAPKW70011
Verwandte Hinweise
986891 - Vorabversion SAPBWNews BW SP20 NW'04 Stack 20 RIN
971631 - Info: Vorlagehinweise und SAPBINEWS
914305 - Vorabversion SAPBINews NW2004s BI SP11
Korrekturanleitungen
Korrektur
anleitung Gültig
von Gültig
bis Software
komponente Ref.
Korrektur Letzte
Änderung
506431 700 700 SAP_BW BR9K040462 12.10.2006 09:58:40
506432 30B 30B SAP_BW_VIRTUAL_COMP J19K026501 12.10.2006 10:10:42
Attribute
Attribut Wert
weitere Komponenten 0000030973
DownPort/UpPort-WF 10
hope this help you,
Krishna -
Myfaces SortableTable stops working after integrated with ADF EA14
Does anyone have a solution on this?
ThanksAfter a quick glance at the MyFaces code, the cause for this is pretty obvious; they've crammed some very funky code into their ResponseWriter, specifically ResponseWriter.endDocument() (including AutoScroll Javascript, etc.). It really doesn't belong there at all, and so when ADF Faces substitutes a different ResponseWriter, their code breaks. I'll bring this up with the MyFaces team.
-
Ingested videos not playing in stereo with Quicktime or after exporting with compressor
Why does it seem like every time I try to do something just mildly complex I'm stymied by some bug or problem with the software?
Here's the deal:
0) I have footage was shot with a stereo camcorder, a JVC GR-DV3000 (circa 2003), with built-in stereo mics.
1) I ingest the footage from the Mini DV tape and save it to a camera archive using Final Cut Pro X (latest version).
2) I use Final Cut Pro to pull the events out of archive.
3) When the events are played from within Final Cut Pro X, I hear strereo and audio meters indicate the audio is in stereo (left and right channels have different volume levels).
4) When the events are played with the open source software, VLC, I hear stereo, too.
5) When I export the files for playing on an Apple device using Final Cut Pro, the audio is in stereo as you would expect.
BUT:
5) When I play the event clips with QuickTime from my hard drive after step 2 above, I get no audio from the right channel. Weird, right?
But most annoying of all:
6) When I use Compressor 4 (instead of Final Cut) to output the event clips to "SD for Apple Devices" using the default audio settings, I get no audio from the right channel, either.
7) I've got hundreds, if not thousands, of clips. I'm not about to save each clip manually with FCPX. I need to batch convert these files with Compressor.
8) I've tried various combinations of the audio import settings ("Analyze and fix audio problems," "Separate mono and group stereo audio," and "Remove silent channels." These options have not solved the issue for me. The clips still play in mono in QuickTime.
When I look at the properties of the file in QuickTime, here's what it shows:
DV/DVCPRO - NTSC, 720 x 480 (640 x 480)
Linear PCM, 16 bit little-endian signed integer, 32000 Hz, Left
Linear PCM, 16 bit little-endian signed integer, 32000 Hz, Unused
Linear PCM, 16 bit little-endian signed integer, 32000 Hz, Unused
Linear PCM, 16 bit little-endian signed integer, 32000 Hz, Unused
Why it's telling me the other 3 channels are unused, I have no idea. As I mentioned, the footage was shot in stereo and even Final Cut plays it in stereo.
Here's what VLC says about the very same file:
Stream 0:
Type: Audio
Codec:PCM S16 LE (sowt)
Channels: Mono
Sample Rate: 32000 Hz
Bits per sample: 16
Stream 1:
Type: Audio
Codec:PCM S16 LE (sowt)
Channels: 1
Sample Rate: 32000 Hz
Bitrate: 512 kb/s
Stream 2:
Type: Audio
Codec:PCM S16 LE (sowt)
Channels: 1
Sample Rate: 32000 Hz
Bitrate: 512 kb/s
Stream 3:
Type: Audio
Codec:PCM S16 LE (sowt)
Channels: 1
Sample Rate: 32000 Hz
Bitrate: 512 kb/s
Stream 4:
Type: Video
Codec: (DV Video (dvc)
Resolution: 720 x 480
Frame Rate: 29.970030
Decoded Format: Planar 4:1:1 YUV
If anyone can point in the right direction, I'd much appreciate it.I ended up just using iMovie to capture video from the camera. The clips now play in stereo in QuickTime perfectly.
It's interesting to note that iMovie saves the clips as .dv file types, not .mov file types like FCPX does.
And it turns out the iMovie capture is *much* smoother. It actually "just works." Ingesting tapes with FCPX, I had to cross my fingers, spin on my head and pray three times to a statue of Steve Jobs before it would work (and even then it would do weird stuff).
The only downside of using iMovie is that it doesn't have the camera archive feature.
I really don't understand why, with $120 billion in the bank, Apple seems to be churning out software as an afterthought. No, software is not where they make their money, but they are ruining their reputation. Ah, well, first world problems. -
Mac Pro 3,1 with 5770 problems after sleep with Lion
Hi,
with 10.7.3 there was a fix for older iMacs with the same issue on an HD 2600 but my mac Pro with the 5770 has the same problem.
Is the Mac Pro user less important for Apple?
My card works fine afer restart. No issues and performance problems (cinebench scores 37fps) but when i sleep my mac and then wake it up all graphic UI things are creepy. There are laggy animations and so on and the speed in Aperture is decreased to a minimum. Cinebench scores after wake up only 16fps.
I bought the card to INCREASE my speed (formerly i have had the HD 2600 built in) and for now, my 249€ is spent for nothing. I dont want to restart my Mac everyday.So, i have set up a completely new system with all updates to 10.7.4 and the problem already exists.
I am not sure, if this was a problem with Lion or with the ATI 5770
Not really nice -
Oracle Identity and Access Management Suite Plus Integration with Oracle ADF
Hi All,
Kindly advice if Oracle Identity and Access Management Suite Plus can be integrated with Oracle ADF based applications to manage the end-to-end lifecycle of user accounts specifically addressing to roles/priviledges and security.
Request you to share links to documentation where I can study the steps to integrate both the frameworks.
Looking forward to hear from you soon.
Best Regards,
Ankit GuptaHi Sébastien,
I came across the below link for the required integrations -
Oracle&reg; Fusion Middleware Installation Guide for Oracle Identity and Access Management 11g Release 2 (11.1.2) - …
Oracle&reg; Fusion Middleware Enterprise Deployment Guide for Oracle Identity Management 11g Release 2 (11.1.2) - Co…
Best Regards,
Ankit Gupta
Maybe you are looking for
-
Mail Messages Going To Drafts Folder
Almost every mail message I compose - both new messages and replies - are showing up in the Drafts folder. These seem to be identical to messages after they are sent and appearing in the Sent folder. I'm not saving them at any time, so why would th
-
I have a windows 8 computer and I installed the newest version of itunes because I used to have an ipod and I have a few purchases that I wanted to listen to. When I try to play them it says it's playing but I can't hear anything. It does not even sa
-
Hi, For some reason, or not, I cannot make font sizes larger with the Apple key + combination. I can make the font size smaller with Apple key - but not larger with Apple key +. Why? The text is NOT at its largest size. I can make things larger by go
-
My Ipod touch 2nd generation stopped making sound
I have had my ipod for many years so I know it doesn't fit under this topic but none of them did... All of a sudden last night my ipod touch 2G just stopped making sound for music or notifications even with headphones. I restored it from itunes but n
-
Design of Time Management infocube
Hi, I need the help of HR BW experts!!! The scenario is this: 1) I'm loading transactional data for time and accidents through Flat files into an ODS 2) My final cube, must have the 0EMPLOYEE and their attributes as well to use in reports 3) I know