Tachometer not found in chart type, based on exceptions

Hello all,
i cannot find tachometer in any of my chart types, only speedometer. I tried speedometer but it does not read my exceptions even after checking exception ON in the web item.
I want to display 3 simple value ranges in green, yellow and red based on exceptions. I have only one column and one one value. tachometer is the best ..
can you help please,
rgds,

Hi Iryna,
there is an entry "Show expanded Hierarchy nodes" in the options for graphics. You can find it in the SAP standard template or in the Web Application designer. If the entry is not set, only the lowest expanded nodes of a hierarchy are displayed.
Kind regards,
Jürgen

Similar Messages

Storage bin not found (enter storage type) L3398

Hi,
We have an very critical issue. We have gone live on 14th , only one day before. Now our system is showing the message
"Storage bin not found (enter storage type) L3398.""
We have defined Open storage type in our system where , mix storage is allowed. There are 10 bins in this storage type. There is not capacity check for these bins. Now system is not searching bin from Open storage and we have stucked with TO creation. System is not allowing us to created any TO.
KIndly do the help
I will be very thankful if reply fast.
Regards,
Manish I

Hi MANISH,
Though there exists many storage bins , the system is not able to find these bins because proper storage unit type is not defined.
System identifies the destination based on the following criteria :
Activate Storage Type Search
Activate Storage Section Search
Activate Storage Bin Type Search
Go through the below customising for better understanding :
SPROLogistics ExecutionWarehouse Management--Strategies
Maintain the Warehouse Management 2 view of Material master with Palletization data .
Thanks,
Swamy H P

** SOAP to SOAP call - HTTP 404 not found - invalid content type

Hi friends,
We have one scenario SOAP to SOAP call. It is synchronous interface. We are calling the WSDL.
For some of the messages (not all), we are getting the error in SXMB_MONI
com.sap.engine.interfaces.messaging.api.exception.MessagingException: java.io.IOException: invalid content type for SOAP: TEXT/HTML; HTTP 404 Not Found
In the sender & receiver SOAP communication channel also, same error : SOAP: call failed: java.io.IOException: invalid content type for SOAP: TEXT/HTML; HTTP 404 Not Found
Friends, this error is not coming for all messages. For some of the messages it is coming. For example,
10:50 - Message Processed Successfully
10:54 - Message Processed Successfully
10:59 - Error
11:05 - Message Processed Successfully
By looking threads and blogs, I implemented MessagesTransformBean in the receiver CC and added the parameter Transform.ContentType as 'text/xml;charset=utf-8'.
After implementing this also, error is coming for some of the messages.
Can you kindly clarify friends, what could be the problem?
Kind regards,
Jegathees P.

I'm in agreement with Stefan...
If the problem is intermittent then the system is overloaded at certain times. You would probably need to do some JVM analysis to see the resource usage & look at increasing the memory.
Regards, Trevor

CUCM 9 & AS5850, Using MGCP Gateways not found in "Gateway Type" list...

I have an application where I need to control a large, AS5850 gateway using MGCP. CUCM version is 9.1, soon to be 10.0. The gateway is populated with CT3 cards.
We have confirmed that the AS5850 does in fact support MGCP, however it is not listed as an option in the list of gateway product choices when adding a new gateway in CUCM. So my first question:
1) How do you add an MGCP gateway in CUCM when it is not listed in the "gateway type" drop-down list? It seems there must be a way to do this. Other well known gateways such as the AS5300, AS5400 etc.. are also notably absent from the list of gateway choices. Perhaps there is a template that can be edited?
If anyone has experience utilizing an AS5850 gateway with CUCM & MGCP, it would be very useful to see sample configuration programming from your gateway.
Many thanks

Hi,
As per the datasheet, the Cisco AS5850 Universal Gateway supports H.323, SIP, and MGCP call-control protocols with extensive SNMP management and debugging capabilities. It works with the Cisco PGW 2200 Softswitch, the Cisco BTS 10200 Softswitch, and many partner softswitches as well.
http://www.cisco.com/en/US/prod/collateral/iad/ps509/ps512/product_data_sheet09186a008007cc48.html
It looks like that its not supported with CUCM.
HTH
Manish

Deserializer not found for array Type...

I hava a web-Servicd deployed in AXIS - is Takes an array of a complex type and returns one.
Everytime i run the service the service properly does the processing and returns the correct Object.
When the client receives the REsponse i get the following exception
- Exception:
org.xml.sax.SAXException: No deserializer defined for array type {urn:SchufaService}Response
     at org.apache.axis.encoding.ser.ArrayDeserializer.onStartElement(ArrayDeserializer.java:304)
     at org.apache.axis.encoding.DeserializerImpl.startElement(DeserializerImpl.java:428)
     at org.apache.axis.encoding.DeserializationContextImpl.startElement(DeserializationContextImpl.java:976)
     at org.apache.axis.message.SAX2EventRecorder.replay(SAX2EventRecorder.java:198)
     at org.apache.axis.message.MessageElement.publishToHandler(MessageElement.java:722)
     at org.apache.axis.message.RPCElement.deserialize(RPCElement.java:233)
     at org.apache.axis.message.RPCElement.getParams(RPCElement.java:347)
     at org.apache.axis.client.Call.invoke(Call.java:2272)
     at org.apache.axis.client.Call.invoke(Call.java:2171)
     at org.apache.axis.client.Call.invoke(Call.java:1691)
     at de.awe.client.SchufaServiceSoapBindingStub.getInformation(SchufaServiceSoapBindingStub.java:329)
     at de.awe.client.SessionClient.main(SessionClient.java:45)here is my .wsdd file - i think i did the correct bean and type mappings:
<deployment xmlns="http://xml.apache.org/axis/wsdd/"
            xmlns:java="http://xml.apache.org/axis/wsdd/providers/java">
<handler name="session" type="java:org.apache.axis.handlers.SimpleSessionHandler">
</handler>
<service name="SchufaService" provider="java:RPC">
<requestFlow>
     <handler type="soapmonitor"/>
    <handler type="session"/>
</requestFlow>
<responseFlow>
     <handler type="session"/>
    <handler type="soapmonitor"/>
</responseFlow>
<parameter name="scope" value="session"/>
<parameter name="className" value="de.awe.webservice.SchufaService"/>
<parameter name="allowedMethods" value="*"/>
<beanMapping qname="SchufaService:Person" xmlns:SchufaService="urn:SchufaService" languageSpecificType="java:de.awe.model.Person"/>
<beanMapping qname="SchufaService:Address" xmlns:SchufaService="urn:SchufaService" languageSpecificType="java:de.awe.model.Address"/>
<beanMapping qname="SchufaService:Request" xmlns:SchufaService="urn:SchufaService" languageSpecificType="java:de.awe.model.Request"/>
<beanMapping qname="SchufaService:Response" xmlns:SchufaService="urn:SchufaService" languageSpecificType="java:de.awe.xml.Response"/>
<beanMapping qname="SchufaService:ResponseAuskunft" xmlns:SchufaService="urn:SchufaService" languageSpecificType="java:de.awe.xml.ResponseAuskunft"/>
<beanMapping qname="SchufaService:ResponseFehlerbehandlung" xmlns:SchufaService="urn:SchufaService" languageSpecificType="java:de.awe.xml.ResponseFehlerbehandlung"/>
<beanMapping qname="SchufaService:ResponseNachbehandlung" xmlns:SchufaService="urn:SchufaService" languageSpecificType="java:de.awe.xml.ResponseNachbehandlung"/>
<beanMapping qname="SchufaService:Textdaten" xmlns:SchufaService="urn:SchufaService" languageSpecificType="java:de.awe.model.Textdaten"/>
<beanMapping qname="SchufaService:Merkmal" xmlns:SchufaService="urn:SchufaService" languageSpecificType="java:de.awe.model.Merkmal"/>
<typeMapping
        xmlns:ns="http://localhost:8080/axis/services/SchufaService"
        qname="ns:ArrayOf_tns1_Request"
        type="java:de.awe.client.Request[]"
        serializer="org.apache.axis.encoding.ser.ArraySerializerFactory"
        deserializer="org.apache.axis.encoding.ser.ArrayDeserializerFactory"
        encodingStyle="http://schemas.xmlsoap.org/soap/encoding/"
      />
<typeMapping
        xmlns:ns="http://localhost:8080/axis/services/SchufaService"
        qname="ns:ArrayOf_tns1_Response"
        type="java:de.awe.client.Response[]"
        serializer="org.apache.axis.encoding.ser.ArraySerializerFactory"
        deserializer="org.apache.axis.encoding.ser.ArrayDeserializerFactory"
        encodingStyle="http://schemas.xmlsoap.org/soap/encoding/"
      />
</service>
</deployment>Please tell me where to find the error...
Thanks a lot

Hi,
Can you paste the client's code in here? this error is usually on the client side where in the array type was not mapped properly.
thanks,
leighsy
I hava a web-Servicd deployed in AXIS - is Takes an
array of a complex type and returns one.
Everytime i run the service the service properly does
the processing and returns the correct Object.
When the client receives the REsponse i get the
following exception

Legend not appearing for Chart Type columns/bars in business graphics

Hi Experts,
I'm not able to make the legend appear in web dynpro screen.As such graphs is coming but the legends are not appearing at runtime. When i customize the graph using t-code 'BS_ANLY_CD' or right-click on business graphics, the legends are appearing in customizing preview but not in runtime.
Could anybody help me out in this issue?
Below is the screenshot of the same.
Thanks in advance.
Regards,
Bob.

Its solved .Solution is below.
You just need to add the label description for both the series then the legend will automatically come as shown below.

MSMQ message transactional not found in Error - No eventviewer / any exception

Hi Experts,
I called external web service and that response message need to be stored in MSMQ.
It calls web service and also it returns the proper response.
But, the Response message has not stored in MSMQ private queue. It has full access on anoymous / everyone users.
No errors in eventviewer found. But, few time it works.
The msmq configuration written in BizTalk Rule Composer.
&transaction=true;
Please advice.

Yes, it has a DSN. It is:
DSN Test Homer
User Name ******
Server homer.cs.odu.edu
The connection string is:
Provider=MSDASQL.1;Password=*******;Persist Security Info=True;User ID=******;Extended Properties="DSN=Test Homer;UID=******;PWD=******;SERVER=homer.cs.odu.edu;"
with the appropriate user name and password filled in.

Error in ChartImage.axd - Image not Found

I am getting an intermitant error on our production website. I have a web form with two pie charts & every once in a while i will get an error from /ChartImg.axd:
The image is not found.
at
System.Web.UI.DataVisualization.Charting.ChartHttpHandler.ProcessSavedChartImage(HttpContext
context) at
System.Web.UI.DataVisualization.Charting.ChartHttpHandler.System.Web.IHttpHandler.ProcessRequest(HttpContext
context) at System.Web.Http
I see no consistency as far as browsers / OS. My team has been unable to re-create this error. Does anyone recognize this?
Thanks

Looks like I am not the only person who encounter this problem, but none of them seems to work for me. let me start by the stack trace:
The image is not found.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.ArgumentException: The image is not found.
Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
Stack Trace:
[ArgumentException: The image is not found.]
System.Web.UI.DataVisualization.Charting.ChartHttpHandler.ProcessSavedChartImage(HttpContext context) +418
System.Web.UI.DataVisualization.Charting.ChartHttpHandler.System.Web.IHttpHandler.ProcessRequest(HttpContext context) +75
System.Web.HttpServerUtility.ExecuteInternal(IHttpHandler handler, TextWriter writer, Boolean preserveForm, Boolean setPreviousPage, VirtualPath path, VirtualPath filePath, String physPath, Exception error, String queryStringOverride) +1116
[HttpException (0x80004005): Error executing child request for ChartImg.axd.]
System.Web.HttpServerUtility.ExecuteInternal(IHttpHandler handler, TextWriter writer, Boolean preserveForm, Boolean setPreviousPage, VirtualPath path, VirtualPath filePath, String physPath, Exception error, String queryStringOverride) +2677679
System.Web.HttpServerUtility.Execute(String path, TextWriter writer, Boolean preserveForm) +819
System.Web.HttpServerUtility.Execute(String path) +8
System.Web.UI.DataVisualization.Charting.ChartHttpHandler.EnsureInitialized(Boolean hardCheck) +152
System.Web.UI.DataVisualization.Charting.ChartHttpHandler.EnsureInstalled() +27
System.Web.UI.DataVisualization.Charting.Chart.GetImageStorageMode() +45
System.Web.UI.DataVisualization.Charting.Chart.Render(HtmlTextWriter writer) +199
System.Web.UI.Control.RenderControlInternal(HtmlTextWriter writer, ControlAdapter adapter) +27
System.Web.UI.Control.RenderControl(HtmlTextWriter writer, ControlAdapter adapter) +99
System.Web.UI.Control.RenderControl(HtmlTextWriter writer) +25
System.Web.UI.Control.RenderChildrenInternal(HtmlTextWriter writer, ICollection children) +134
System.Web.UI.Control.RenderChildren(HtmlTextWriter writer) +19
System.Web.UI.Control.Render(HtmlTextWriter writer) +10
System.Web.UI.Control.RenderControlInternal(HtmlTextWriter writer, ControlAdapter adapter) +27
System.Web.UI.Control.RenderControl(HtmlTextWriter writer, ControlAdapter adapter) +99
System.Web.UI.Control.RenderControl(HtmlTextWriter writer) +25
System.Web.UI.Control.RenderChildrenInternal(HtmlTextWriter writer, ICollection children) +134
System.Web.UI.Control.RenderChildren(HtmlTextWriter writer) +19
System.Web.UI.UpdatePanel.RenderChildren(HtmlTextWriter writer) +234
System.Web.UI.Control.Render(HtmlTextWriter writer) +10
System.Web.UI.UpdatePanel.Render(HtmlTextWriter writer) +34
System.Web.UI.Control.RenderControlInternal(HtmlTextWriter writer, ControlAdapter adapter) +27
System.Web.UI.Control.RenderControl(HtmlTextWriter writer, ControlAdapter adapter) +99
System.Web.UI.Control.RenderControl(HtmlTextWriter writer) +25
System.Web.UI.Control.RenderChildrenInternal(HtmlTextWriter writer, ICollection children) +134
System.Web.UI.Control.RenderChildren(HtmlTextWriter writer) +19
System.Web.UI.HtmlControls.HtmlForm.RenderChildren(HtmlTextWriter writer) +163
System.Web.UI.HtmlControls.HtmlContainerControl.Render(HtmlTextWriter writer) +32
System.Web.UI.HtmlControls.HtmlForm.Render(HtmlTextWriter output) +51
System.Web.UI.Control.RenderControlInternal(HtmlTextWriter writer, ControlAdapter adapter) +27
System.Web.UI.Control.RenderControl(HtmlTextWriter writer, ControlAdapter adapter) +99
System.Web.UI.HtmlControls.HtmlForm.RenderControl(HtmlTextWriter writer) +40
System.Web.UI.Control.RenderChildrenInternal(HtmlTextWriter writer, ICollection children) +134
System.Web.UI.Control.RenderChildren(HtmlTextWriter writer) +19
System.Web.UI.Page.Render(HtmlTextWriter writer) +29
System.Web.UI.Control.RenderControlInternal(HtmlTextWriter writer, ControlAdapter adapter) +27
System.Web.UI.Control.RenderControl(HtmlTextWriter writer, ControlAdapter adapter) +99
System.Web.UI.Control.RenderControl(HtmlTextWriter writer) +25
System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +1266
tried this:
<appSettings>
<add key="ChartImageHandler" value="storage=file;deleteAfterServicing=false;..."/>
</appSettings>
but doesn't work
I am also using 1 single development machine so no server farm to worry about.
There are 3 files to this small project that I'm doing:
1. loginReport.aspx - the main charting page that will display the how many logins
2. mid.aspx - the middle page that contains iframe and to setup reference time
3. default.aspx - contains Easy Widget jQuery plugin by David Esperalta (it's quite cool, you need to check it out! - http://www.bitacora.davidesperalta.com/archives/projects/easywidgets/)
Here's my code:
Report.aspx
<%@ Page Language="C#" AutoEventWireup="true" CodeFile="loginReport.aspx.cs" Inherits="loginReport" %>
<%@ Register Assembly="System.Web.DataVisualization, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" Namespace="System.Web.UI.DataVisualization.Charting" TagPrefix="asp" %>
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head runat="server">
<title></title>
</head>
<body>
<form id="form1" runat="server">
<asp:ScriptManager ID="ScriptManager1" runat="server">
</asp:ScriptManager>
<asp:UpdatePanel ID="UpdatePanel1" runat="server">
<ContentTemplate>
<asp:Chart ID="Chart1" runat="server" Height="296px" Width="412px"
BackColor="#D3DFF0" BorderLineStyle="Solid" BackGradientEndColor="White"
BackGradientType="TopBottom" BorderlineWidth="2" BorderlineColor="26, 59, 105"
EnableViewState="true">
<Series>
<asp:Series XValueType="Double" Name="Series1" ChartType="FastLine" BorderColor="180, 26, 59, 105" Color="Orange"
YValueType="Double" BorderWidth="2" ShadowColor="254, 0, 0, 0" ShadowOffset="1">
<Points>
<asp:DataPoint XValue="0" YValues="0"/>
</Points>
</asp:Series>
</Series>
<ChartAreas>
<asp:ChartArea Name="Default" BorderColor="64, 64, 64, 64" BorderDashStyle="Solid" BackSecondaryColor="White"
BackColor="64, 165, 191, 228" ShadowColor="Transparent" BackGradientStyle="TopBottom">
<Position Y="2" Height="94" Width="94" X="2"></Position>
<AxisY LineColor="64, 64, 64, 64">
<LabelStyle Font="Trebuchet MS, 8.25pt, style=Bold"></LabelStyle>
<MajorGrid LineColor="64, 64, 64, 64"></MajorGrid>
</AxisY>
<AxisX LineColor="64, 64, 64, 64" IsMarginVisible="False" Maximum="100" Minimum="0" IsStartedFromZero="False">
<LabelStyle Font="Trebuchet MS, 8.25pt, style=Bold"></LabelStyle>
<MajorGrid LineColor="64, 64, 64, 64" ></MajorGrid>
</AxisX>
</asp:ChartArea>
</ChartAreas>
<BorderSkin SkinStyle="Emboss" />
</asp:Chart>
<asp:Timer ID="Timer1" runat="server" OnTick="Timer1_Tick">
</asp:Timer>
<asp:Label ID="points" runat="server"></asp:Label>
</ContentTemplate>
</asp:UpdatePanel>
<asp:Label ID="referenceTime" runat="server"></asp:Label>
</form>
</body>
Report.aspx.cs
using System;
using System.Collections.Generic;
using System.Linq;
using System.Web;
using System.Web.UI;
using System.Web.UI.WebControls;
using System.Configuration;
using MonitorSystemBL.Controller;
using System.Web.UI.DataVisualization.Charting;
public partial class loginReport : System.Web.UI.Page
loginController loginController;
string cs = ConfigurationSettings.AppSettings["connectionString"];
protected void Page_Load(object sender, EventArgs e)
if (!Page.IsPostBack)
referenceTime.Text = "4/23/2009 11:17:00 AM";
//referenceTime.Text = Session["loginCountRT"].ToString();
Chart1.ChartAreas[0].AxisX.Minimum = 0;
Chart1.ChartAreas[0].AxisX.Maximum = 2;
Chart1.ChartAreas[0].AxisX.Interval = 1.0;
Timer1.Interval = 2000;
protected void Timer1_Tick(object sender, EventArgs e)
draw();
private void draw()
loginController = new loginController(cs);
DateTime rt = Convert.ToDateTime(referenceTime.Text);
DateTime timeNow = DateTime.Now;
Int32 count = loginController.getLoginCount(Convert.ToDateTime(rt));
double x = timeDifference(rt, timeNow);
x = Convert.ToDouble(String.Format("{0:0.00}", x));
Chart1.Series[0].Points.AddXY(x, count);
Int64 totalPoint = Convert.ToInt32(2 * 60 / 2);
points.Text = x.ToString() + " : " + Chart1.Series[0].Points.Count.ToString() + " : " + totalPoint.ToString();
// Remove points from the left chart side if number of points exceeds 100.
while (this.Chart1.Series[0].Points.Count > totalPoint)
// Remove series points
foreach (Series series in this.Chart1.Series)
series.Points.RemoveAt(0);
double axisMinimum = this.Chart1.Series[0].Points[0].XValue;
this.Chart1.ChartAreas[0].AxisX.Minimum = axisMinimum;
this.Chart1.ChartAreas[0].AxisX.Maximum = axisMinimum + 2;
private double timeDifference(DateTime referenceTime, DateTime compareTime)
TimeSpan ts = compareTime.Subtract(referenceTime);
double min = ts.Minutes;
double sec = ts.Seconds / 60.0;
double total = min + sec;
return total;
mid.aspx
<%@ Page Language="C#" AutoEventWireup="true" CodeFile="mid.aspx.cs" Inherits="mid" %>
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head runat="server">
<title></title>
</head>
<body>
<div class="widget movable collapsable removable closeconfirm">
<form id="form2" runat="server">
<div class="widget-header">
<strong><asp:Label ID="lbl_title" runat="server"></asp:Label></strong>
</div>
<div class="widget-content">
<iframe id="iframe1" runat="server" frameborder="0" width="450px" height="320px" scrolling="no"></iframe>
</div>
</form>
</div>
</body>
</html>
mid.aspx.cs
using System;
using System.Collections.Generic;
using System.Linq;
using System.Web;
using System.Web.UI;
using System.Web.UI.WebControls;
using MonitorSystemBL.Controller;
public partial class mid : System.Web.UI.Page
protected void Page_Load(object sender, EventArgs e)
//include all the query
string queryString = "";
string url = "";
loginController loginController = new loginController(System.Configuration.ConfigurationManager.AppSettings["connectionString"]);
if (Request.QueryString["s"] == "l")
iframe1.Attributes.Add("width", "800");
iframe1.Attributes.Add("height", "600");
if (Request.QueryString["item"] != null && Request.QueryString["item"] != "")
switch (Request.QueryString["item"])
case "loginCount":
url = "loginReport.aspx";
string time = loginController.getLatestDateTime().ToString();
string timeNow = DateTime.Now.ToString();
Session["loginCountRT"] = timeNow;
break;
default:
break;
for (int i = 0; i < Page.Request.QueryString.Count; i++)
lbl_title.Text = Request.QueryString["client"] + " : " + Request.QueryString["item"];
if (queryString.Length == 0)
queryString += "?";
else
queryString += "&";
queryString += string.Format("{0}={1}", Page.Request.QueryString.GetKey(i), Page.Request.QueryString[i]);
iframe1.Attributes.Add("src", url + queryString);
default.aspx
<%@ Page Language="C#" AutoEventWireup="true" CodeFile="Default.aspx.cs" Inherits="_Default" %>
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head runat="server">
<title></title>

<link href="css/jquery.easywidgets.css" rel="stylesheet" type="text/css" />

<link href="css/example.css" rel="stylesheet" type="text/css" />

<script src="jscripts/jquery1.3.2.js" type="text/javascript"></script>

<script src="jscripts/jquery-ui.min.js" type="text/javascript"></script>

<script src="jscripts/jquery.easywidgets.js" type="text/javascript"></script>

<script src="jscripts/example.js" type="text/javascript"></script>
</head>
<body>
<form id="form1" runat="server">
<div style="height:800px;" id="placeHolder1" class="widget-place"></div>
<div style="height:800px;" id="placeHolder2" class="widget-place"></div>
<div style="clear:both; font-family:Verdana; font-size:12px;">
<table>
<tr>
<td>Client:</td>
<td>
<asp:DropDownList ID="ddl_client" runat="server">
<asp:ListItem Text="First HSA" Value="1HSA"></asp:ListItem>
</asp:DropDownList></td>
<td>Item:</td>
<td>
<asp:DropDownList ID="ddl_item" runat="server">
<asp:ListItem Text="Login Count" Value="loginCount"></asp:ListItem>
</asp:DropDownList></td>
<td>Interval (hr): </td>
<td><asp:TextBox ID="tb_interval" runat="server" Width="30"></asp:TextBox></td>
<td>Refresh Rate (sec): </td>
<td><asp:TextBox ID="tb_refreshRate" runat="server" Width="30"></asp:TextBox></td>
<td>
<asp:DropDownList ID="ddl_size" runat="server">
<asp:ListItem Text="small" Value="s"></asp:ListItem>
<asp:ListItem Text="large" Value="l"></asp:ListItem>
</asp:DropDownList></td>
<td><input type="button" value="Create" onclick="create()" /></td></tr>
</table>
</div>
<script language="javascript" type="text/javascript">
function create() {
var client = document.getElementById('<%=ddl_client.ClientID %>').options[document.getElementById('<%=ddl_client.ClientID %>').selectedIndex].value;
var item = document.getElementById('<%=ddl_item.ClientID %>').options[document.getElementById('<%=ddl_item.ClientID %>').selectedIndex].value;
var interval = document.getElementById('<%= tb_interval.ClientID %>').value;
var rr = document.getElementById('<%= tb_refreshRate.ClientID %>').value;
var size = document.getElementById('<%=ddl_size.ClientID %>').options[document.getElementById('<%=ddl_size.ClientID %>').selectedIndex].value;
var url = 'mid.aspx?client=' + client + '&item=' + item + '&i=' + interval + '&r=' + rr + '&s=' + size;
//alert(url);
if (size == 'l') {
$.fn.resizeable();
else
AddWidget(url, 'placeHolder1');
return false;
</script>
</form>
</body>
</html>
nothing in the default.aspx.cs
Here's what I found:
It will work when:
1. view loginReport.aspx first
2. view default.aspx
--- close ASP.NET Development Server (with port #)
It will not work when
1. view default.aspx
but if I view loginReport.aspx and then come back to default.aspx, it'll work
it seems like I have to start a simple chart first
(to test this you'll have to close the ASP.NET development server<with port #>) on your lower right hand corder next to the system time)
so this problem is able to be reproduced. hope sometime find something and gave shed me some lights =)

Field Catalog Not Found in ALV

Hi Experts,
I am trying to exceute the below code its shows the Field CataLog Not Found
Code is:
TYPE-POOLS:slis.
TABLES:ekpo,mseg.
TYPES: BEGIN OF ty_ekpo,
       ebeln TYPE ekpo-ebeln,
       ebelp TYPE ekpo-ebelp,
       matnr TYPE ekpo-matnr,
       menge TYPE ekpo-menge,
       END OF ty_ekpo.
TYPES: BEGIN OF ty_mseg,
       ebeln TYPE mseg-ebeln,
       ebelp TYPE mseg-ebelp,
       matnr TYPE mseg-matnr,
       menge TYPE mseg-menge,
       bwart TYPE mseg-bwart,
       END OF ty_mseg.
TYPES: BEGIN OF ty_final,
        ebeln TYPE ebeln,
        ebelp TYPE ebelp,
        qtysup TYPE MENGE_D,
        qtyact TYPE MENGE_D,
        qtyrej TYPE MENGE_D,
       END OF ty_final.
DATA: it_mseg TYPE TABLE OF ty_mseg WITH HEADER LINE,
      it_ekpo TYPE TABLE OF ty_ekpo WITH HEADER LINE,
      it_final TYPE TABLE OF ty_final WITH HEADER LINE.
DATA: wa_fieldcat TYPE slis_fieldcat_alv,
      it_fieldcat TYPE slis_t_fieldcat_alv.
DATA:wa_mseg LIKE LINE OF it_mseg,
     wa_ekpo LIKE LINE OF it_ekpo ,
     wa_final LIKE LINE OF it_final.
SELECT-OPTIONS: p_ebeln FOR ekpo-ebeln.
START-OF-SELECTION.
SELECT ebeln ebelp matnr menge FROM ekpo
                                 INTO TABLE it_ekpo
                                 WHERE ebeln IN p_ebeln.
IF it_ekpo[] IS NOT INITIAL.
    SELECT ebeln ebelp matnr menge bwart FROM mseg
                                                INTO TABLE it_mseg
                                                FOR ALL ENTRIES IN it_ekpo[]
                                                WHERE ebeln EQ it_ekpo-ebeln
                                                AND   ebelp EQ it_ekpo-ebelp
                                                AND bwart EQ '122'.
ENDIF.
LOOP AT it_mseg .
    READ TABLE it_ekpo WITH KEY ebeln = it_mseg-ebeln.
    IF sy-subrc EQ 0.
      it_final-qtyrej = it_mseg-menge.
      it_final-qtysup = it_ekpo-menge.
      it_final-ebeln = it_mseg-ebeln.
      it_final-ebelp = it_mseg-ebelp.
    ENDIF.
IF sy-subrc EQ 0.
      it_final-qtyact = ( it_final-qtysup ) - ( it_final-qtyrej ).
    ENDIF.
    APPEND it_final.
ENDLOOP.
wa_fieldcat-fieldname = 'EBELN'.
wa_fieldcat-tabname   = 'IT_FINAL'.
wa_fieldcat-seltext_l = 'Purchase Doc'.
wa_fieldcat-seltext_m = wa_fieldcat-seltext_l.
wa_fieldcat-seltext_s = wa_fieldcat-seltext_l.
wa_fieldcat-col_pos     = 1.
wa_fieldcat-outputlen   = 10.
APPEND wa_fieldcat TO it_fieldcat.
CLEAR wa_fieldcat.
wa_fieldcat-fieldname = 'EBELP'.
wa_fieldcat-tabname   = 'IT_FINAL'.
wa_fieldcat-seltext_l = 'Item'.
wa_fieldcat-seltext_m = wa_fieldcat-seltext_l.
wa_fieldcat-seltext_s = wa_fieldcat-seltext_l.
wa_fieldcat-col_pos     = 2.
wa_fieldcat-outputlen   = 5.
APPEND wa_fieldcat TO it_fieldcat.
CLEAR wa_fieldcat.
wa_fieldcat-fieldname = 'QTYSUP'.
    wa_fieldcat-tabname   = 'IT_FINAL'.
wa_fieldcat-seltext_l = 'QuatitySupply'.
wa_fieldcat-seltext_m = wa_fieldcat-seltext_l.
wa_fieldcat-seltext_s = wa_fieldcat-seltext_l.
wa_fieldcat-col_pos     = 3.
wa_fieldcat-outputlen   = 13.
APPEND wa_fieldcat TO it_fieldcat.
CLEAR wa_fieldcat.
wa_fieldcat-fieldname = 'QTYACT'.
    wa_fieldcat-tabname   = 'IT_FINAL'.
wa_fieldcat-seltext_l = 'QualityAccepted'.
wa_fieldcat-seltext_m = wa_fieldcat-seltext_l.
wa_fieldcat-seltext_s = wa_fieldcat-seltext_l.
wa_fieldcat-col_pos     = 4.
wa_fieldcat-outputlen   = 13.
APPEND wa_fieldcat TO it_fieldcat.
CLEAR wa_fieldcat.
wa_fieldcat-fieldname = 'QTYREJ'.
wa_fieldcat-tabname   = 'IT_FINAL'.
wa_fieldcat-seltext_l = 'QualityRejected'.
wa_fieldcat-seltext_m = wa_fieldcat-seltext_l.
wa_fieldcat-seltext_s = wa_fieldcat-seltext_l.
wa_fieldcat-col_pos     = 5.
wa_fieldcat-outputlen   = 13.
APPEND wa_fieldcat TO it_fieldcat.
CLEAR wa_fieldcat.
DATA: repid LIKE sy-repid.
repid = sy-repid.
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
   EXPORTING
      I_CALLBACK_PROGRAM             = repid
    TABLES
      t_outtab                       = it_final[]
EXCEPTIONS
    PROGRAM_ERROR                  = 1
    OTHERS                         = 2
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Thanks In Advance
Poorna

Hi,
pass parametrs as it is given below...
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
EXPORTING
I_INTERFACE_CHECK              = ' '
I_BYPASSING_BUFFER             =
I_BUFFER_ACTIVE                = ' '
I_CALLBACK_PROGRAM             = repid
I_CALLBACK_PF_STATUS_SET       = ' '
I_CALLBACK_USER_COMMAND        = ' '
I_STRUCTURE_NAME               =
IS_LAYOUT                      =
IT_FIELDCAT                    = it_fieldcat
IT_EXCLUDING                   =
IT_SPECIAL_GROUPS              =
IT_SORT                        =
IT_FILTER                      =
IS_SEL_HIDE                    =
I_DEFAULT                      = 'X'
I_SAVE                         = ' '
IS_VARIANT                     =
IT_EVENTS                      =
IT_EVENT_EXIT                  =
IS_PRINT                       =
IS_REPREP_ID                   =
I_SCREEN_START_COLUMN          = 0
I_SCREEN_START_LINE            = 0
I_SCREEN_END_COLUMN            = 0
I_SCREEN_END_LINE              = 0
IR_SALV_LIST_ADAPTER           =
IT_EXCEPT_QINFO                =
I_SUPPRESS_EMPTY_DATA          = ABAP_FALSE
IMPORTING
E_EXIT_CAUSED_BY_CALLER        =
ES_EXIT_CAUSED_BY_USER         =
TABLES
    t_outtab                       = it_final[]
EXCEPTIONS
PROGRAM_ERROR                  = 1
OTHERS                         = 2
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Thanks & Regards
Ashu

Error in alv report (fieldcatlog is not found)

Hai Genious
i am a new of the sap-abap, i have a one problem in my alv report, now i am using the reuse_alv_ fieldcatlog_merge,
i declared with my internal table with type,
my error is :- fieldcatlog not found
for example
types: begin of ty_mara,
matnr type matnr,
meins type meins,
ersda type ersda,
ernam type ernam,
end of ty_mara.
data: wa_mara type ty_mara,
it_mara like table of wa_mara.
select matnr meins ersda ernam from mara into table it_mara.
CALL FUNCTION 'REUSE_ALV_FIELDCATALOG_MERGE'
EXPORTING
I_PROGRAM_NAME = SY-REPID
I_INTERNAL_TABNAME = 'IT_MARA'
I_STRUCTURE_NAME =
I_CLIENT_NEVER_DISPLAY = 'X'
I_INCLNAME = SY-REPID
IF sy-subrc 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
call function 'reuse_alv_list_display'

Hi,
CALL FUNCTION 'REUSE_ALV_FIELDCATALOG_MERGE'
EXPORTING
I_PROGRAM_NAME = SY-REPID
I_INTERNAL_TABNAME = 'IT_MARA'
I_STRUCTURE_NAME = 'TY_MARA'-->give it
I_CLIENT_NEVER_DISPLAY = 'X'
I_INCLNAME = SY-REPID
IF sy-subrc 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
also use...
CHANGING
      ct_fieldcat                  = i_fieldtab
data :i_fieldtab TYPE slis_t_fieldcat_alv,
s_fieldtab_body TYPE slis_fieldcat_alv.
fill i_fieldtab like this...
CASE s_fieldtab_body-fieldname.
      WHEN 'OA_NO'.
        s_fieldtab_body-seltext_l = 'Order Accep. No.'.
        MODIFY i_fieldtab FROM s_fieldtab_body INDEX sy-tabix.
        CLEAR s_fieldtab_body.
      WHEN 'KTEXT'.
        s_fieldtab_body-seltext_l = 'Ramco Order No.'.
        MODIFY i_fieldtab FROM s_fieldtab_body INDEX sy-tabix.
        CLEAR s_fieldtab_body.
and so on

Path or file name "java" not found error

I am getting the error, path or file name "java" not found, when I type in sqlj -version.
I am using a NT server and I have added the CLASSPATH and path to it.
Does anyone have any ideas.

What version of SQLJ are you using? What do you see when you type
java
or
java -version
on the command line?

Partner function not found

Hi All,
We are getting an error as shown in the screenshot below for a particular user.
- The user Id is also faulty and when we try to repair the user we get an error that there are open SC.
- Even if we try to complete the GR using other user id which has Secretary Role (Purchase Assistant à GR/SE for other user), it shows the same error Partner not found with partner type Goods Receipt".
Any pointers to this will be very useful.

Hi
No screen shots attached ?
This is related to Configuration issue.
<b>SPRO -> Supplier Relationship Management -> SRM Server -> Cross-Application Basic Settings -> Define Partner Functions</b>
Refer to following IMG Configuartion path and ensure that Goods Recipient entry is maintained in the system.
Function Function_type Usage Description Abbrerviation Created by
00000020 0002 B2B Goods Recipient GR XXX
Hope this will help.
Please reward suitable points.
Regards
- Atul

Import oracle.adf.view.rich.event.DropEvent; Not Found

Ok guys I have a problem. A large number of my imports are not found when I type them into my project. I am following a book and there is no mention of this happening so I have no idea what to do. I figure maybe it is about finding libraries and adding them to my view controller but I am not sure what libraries I should add.
These are the things that are missing
import oracle.adf.view.rich.datatransfer.DataFlavor;
import oracle.adf.view.rich.datatransfer.Transferable;
import oracle.adf.view.rich.dnd.DnDAction;
import oracle.adf.view.rich.event.DropEvent;
import oracle.adfinternal.view.faces.model.binding.FacesCtrlHierNodeBinding;
import org.apache.myfaces.trinidad.model.CollectionModel;
import org.apache.myfaces.trinidad.model.RowKeySet;
I am hoping that someone out there can help me with this problem

Here is a listing of all of the packages missing since this happened. Keep in mind Ive been using some of these packages with no problems for a while. Dunno what happened. Also I left out the corresponding errors that I'm pretty sure appeared because of this but if anyone needs a full error list I can post it no problem.
Error(6,29): package oracle.adf.controller does not exist
Error(6,41): package oracle.adf.view.rich.datatransfer does not exist
Error(7,41): package oracle.adf.view.rich.datatransfer does not exist
Error(8,32): package oracle.adf.view.rich.dnd does not exist
Error(9,34): package oracle.adf.view.rich.event does not exist
Error(11,51): package oracle.adfinternal.view.faces.model.binding does not exist
Error(17,41): package org.apache.myfaces.trinidad.model does not exist
Error(18,41): package org.apache.myfaces.trinidad.model does not exist
Error(3,29): package javax.faces.component does not exist
Error(4,27): package javax.faces.context does not exist
Error(5,27): package javax.faces.convert does not exist
Error(11,27): package javax.faces.context does not exist
Error(12,25): package javax.faces.event does not exist
Error(16,36): package oracle.adf.view.rich.context does not exist
Error(22,41): package org.apache.myfaces.trinidad.model does not exist
Error(3,29): package oracle.adf.controller does not exist
Error(6,43): package oracle.adf.view.rich.component.rich does not exist
Error(7,52): package oracle.adf.view.rich.component.rich.fragment does not exist
Error(8,34): package oracle.adf.view.rich.event does not exist
Error(15,29): package javax.faces.component does not exist
Error(16,27): package javax.faces.context does not exist
Error(18,35): package oracle.adf.view.rich.render does not exist
Error(20,42): package org.apache.myfaces.trinidad.render does not exist
Error(21,40): package org.apache.myfaces.trinidad.util does not exist
I sincerely hope someone can help me out of this mess

Reg: Exception (ALT NOT FOUND) in the fun.module CS_BOM_EXPL_MAT_V2

Hi Experts,
I called the fun. module CS_BOM_EXPL_MAT_V2 in SE38.
While executing the function module, it is giving output for some types of material like (TP0331-).
But it is raising the exception ALT NOT FOUND for some types of material like 'TB1000-'
But for all types of material, it is giving correct output in SE37.
I gave the input parameter's,
CALL FUNCTION 'CS_BOM_EXPL_MAT_V2'
EXPORTING
   CAPID                       = 'PP01'
   DATUV                       = sy-datum
   EMENG                       = '1'
   MKTLS                       = 'X'
   MEHRS                       = 'X'
   MTNRV                       = 'TB1000-'
   STLAL                       = '1'
   STLAN                       = '1'
   SVWVO                       = 'X'
   WERKS                       = '0010'
   VRSVO                       = 'X'
TABLES
    stb                         = it_stpox
EXCEPTIONS
   ALT_NOT_FOUND               = 1
   CALL_INVALID                = 2
   MATERIAL_NOT_FOUND          = 3
   MISSING_AUTHORIZATION       = 4
   NO_BOM_FOUND                = 5
   NO_PLANT_DATA               = 6
   NO_SUITABLE_BOM_FOUND       = 7
   CONVERSION_ERROR            = 8
   OTHERS                      = 9
Can you please suggest me, why for the particular types of material, these function module is executing correctly in SE37 not in SE38.
Whether i need to give some more inputs in SE38.
Please guide me,
Thanks in advance,
Vijay.R

hi,
i have done the code like this,
CALL FUNCTION 'CS_BOM_EXPL_MAT_V2'
EXPORTING
CAPID = 'PP01'
DATUV = sy-datum
EMENG = '1'
MKTLS = 'X'
MEHRS = 'X'
MTNRV = 'TB1000-'
STLAL = '01' """" i have changed the value as 01 instead of 1.
STLAN = '1'
SVWVO = 'X'
WERKS = '0010'
VRSVO = 'X'
TABLES
stb = it_stpox
EXCEPTIONS
ALT_NOT_FOUND = 1
CALL_INVALID = 2
MATERIAL_NOT_FOUND = 3
MISSING_AUTHORIZATION = 4
NO_BOM_FOUND = 5
NO_PLANT_DATA = 6
NO_SUITABLE_BOM_FOUND = 7
CONVERSION_ERROR = 8
OTHERS = 9
it is a small problem..
whether u need any more information..
please let me know.. still it is not working means,
paste your code.. i will check
regards
vijay

Some songs not found in same album, same directory!

But I can "add file" no problem. This happens whenever I move the music directory or move the directory (I am careful to copy the directory exactly).
So, what is happening in Itunes that some songs are simply not found, although nothing has "relatively" changed except the path? I give it the new path and update the directory.
The downer is that yes you can delete and re-add but you lose all your hard work on the rating system.
Anybody figure all this out?

One way is to select all the tracks and set them to be part of a Compilation (Get Info on all the tracks, then go to the Options tab). The album will then show in the Compilations in the Artists column of the Browser and not under a bunch of artists.
Or you can edit the Artist or Album Artist field so that the information is the same for all tracks. Compilations is probably the most common method for soundtrack albums and such, though.
Regards.

Tachometer not found in chart type, based on exceptions

Similar Messages

Maybe you are looking for