Tactic rage 3d wireless firmware update

Hello,
I've had my headset for almost a year, and I love it. I heard something about a firmware, and decided to install it. Under the download I was talking with my friends on skype and suddenly all my sound went out, and I wasn't able to turn on my headset again. There's no lights or anything in my headset now, the wireless transmitter works fine but it doesn't connect to my headset. I wish I didn't download this firmware . What can I do?

Originally Posted by Loi-CL
Hello Qash,
Unplug the wireless transmitter. Open up the device manager window on your computer. Connect your headset to the computer using the USB cable. Observe the device manager window. Is it detected under device manager?
Same thing has happened to me. Bricked my headset. Device manager places it under "Human Interface Devices", "USB Input Device Properties."
Under details tab, under "Bus reported device description", is listed "Avnera AV6302".
I've removed the device from device manager, unplugged it, restarted computer, plugged it back in, and it installs in the same place.
It appears the the receiver is detected properly and will light up. Headset is completely dark with no indication of charging, connection, etc. Very frustrated as I just bought this unit and was doing the initial install and driver updates. Now I cant use it at all!
I've sent my request for support via the website and also got the 2 day minimum response email back.
TaLnZ
Update: After letting the headset sit all weekend with it plugged in, but the computer off, I turned on the computer this morning and noticed that the power light was blinking. I then tried the headset update, and it worked! There is another post on this issue as well: http://forums.creative.com/showthread.php?t=699394
Good Luck!

Similar Messages

Laserjet M1217nfw - Bricked after disconnected wireless firmware update

Hi,
As I was upgrading my firmware for the Laserjet M1217nfw via my wireless network, my wireless router flaked out and i lost connectivity. I was about 50% complete sending the latest firmware to the printer. How do i go about unbricking this? Can I do this via the RJ45 port or via the USB connection?
Thanks,

The firmware update can be downloaded from here and is able to be performed across USB.
Let me know how this goes.
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------
I am not an HP employee.

World of Warcraft (Wireless) - Firmware update and FAIL

I just made Firmware update for my World of Warcraft Wireless Headset. After "successful" firmware update I Can't connect my wireless headset with my PC.
I installed new driver. Also reinstall my windows 7 and still nothing.
Anyone have similar issue?

Ye, same problem with my pair.. but have resolved it..
You have to turn em off by swith on the left speaker -- > chagne a port usb for a stick -- > turn em ON --> then push both connection buttons on speak and stick for 10 second or more till u see corect result on LED
Cheers and GL

Sound Blaster Tactic3D Rage Wireless Firmware update fail

Hey guys,
As the title says, I have a bit of a problem. I just bought the Tactic3d Rage Wireless headset, and decided to update the firmware as I like to have the latest drivers when I get started on new hardware. So I update the transmitter while the headset was turned off. No problem.
Then when it came to the headset I removed the transmitter and plugged the headset directly to the computer and started the appropriate application. At the end of the upgrade it said it failed to load the system after the new drivers was installed or something similar, and now it's just there flashing blue all the time. It doesn't respond to anything, and if I try upgrading the firmware again it says it can't find the headset.
So I'm wondering A) Did I do something wrog here? and B) How do I fix it? Is there a way to restore the factory settings of the headset somehow?
Please help! Thank you in advance.

Hi guys,
In an effort to centralize similar topics within our forum threads, I am closing this thread.
Kindly post on the centralized thread (link below) for your concerns/ solutions to this particular concern:
soundblaster tactic3d rage
Cheers!
Philip-CL

Sound Blaster Tactic3D Rage Wireless - Driver and Firmware update, now it's frozen?????????

Just recieved my headphones yesterday - plugged it in and charged it = works. I then decided to download the newest drivers and firmware and went straight to bed. This afternoon, suddenly no sound is detected, what so ever! The USB Power LED flashes slowly and a constant red glow is showing at my headphones.. When I try to re-pair it, the USB Power LED flashes rapidly as it should, but neither the Mic Mute button, nor the Connect Button on the headphones responds.. It feels like the headset is simply just frozen right after the new driver/firmware installation.
I've tried everything pretty much.. Went from Wireless to USB to see if that helped, but it didnt. Tried to remove / setback the drivers, still dosn't work. Headphones is just completely frozen with no buttons working and a constant red glowing light - can't be turned off or restarted!!!
WHAT TO DO?!?
Cheers,
Alexander

My headphones just ran out of power during the day = it resetted itself. I then connected it again and re-paired it. Atm it's working perfectly fine again. I will now try to reinstall the Control Panel, not the driver though, hopefully it will work this time and wont make the headphones go into "non-responding-retarded-mode" once again :-)
Conclusion: For me it felt like it was either the Drivers or the Firmware update, maybe both, which made my headphones "crash", or atleast not respond to any command / buttons pushed. If anyone faces the same or similar problems as me, due to installation of drivers/firmware, let your headset run out of power (if you as me, don't know how to remove the battery manually) and just reconnect it :-) Should work then.
- Alexander

WAP4410N wireless traffic locks up even when running latest firmware update

I maintain multiple buildings, and each building has anywhere between 1 and 4 Cisco/Linksys WAP4410N access points. The problem is that at random intervals, the access points just stop sending and receiving wireless traffic. Every day or two, I have to log into every single access point (either via HTTPS or SSH) and reboot them in order for them to start working again.
In short, here are the config details:
They are all version 2 hardware (either WAP4410N-A V02 or WAP4410N-E V02).
They are running IPv4 (IPv6 is disabled) and get static IP addresses via DHCP.
When there are WAPs with overlapping signals, each WAP is on a different non-overlapping channel (1, 6, or 11).
Each WAP has two SSIDs (with spaces in their names). One is secured with WPA2. The other is unsecured.
There are two VLANs on the Ethernet interface. Each of the two SSIDs are assigned to a separate VLAN.
There is a DHCP server on the network, so the WAPs do not actually assign IP addresses to clients.
All of the WAPs are running on PoE switches. However, some are gigabit and some are 10/100 switches. Brands vary (Dell and Linksys) and models vary.
Cisco finally recognized this issue as:
CSCtx62203—In certain environments and traffic model, the WAP4410N may lockup after some undetermined time. Workaround: Reboot the device.
As such, the workaround didn’t really offer anything new. Rebooting every WAP ends up being a very time consuming process. It’s awful. And since you have no control over when this issue surfaces and can’t put any safeguards in place, I get calls about it at various points of the day almost every day.
Supposedly the most recent firmware update (2.0.6.1) claimed to fix the issue, but it only seemed to make it worse. So now instead of a WAP locking up every day or two, it locks up anywhere between every 15 minutes to 4 hours when in use.
The firmware was updated and the following issue was fixed in firmware version 2.0.6.1: CSCtx62203—In certain environments and traffic model, the WAP4410N may lockup after some undetermined time. (A protection mechanism was added to guard against sporadic problems with client association that could occur after six to 24 hours.)
As for troubleshooting, there are no error packets. On access points running firmware 2.0.6.1, these messages appear:
Feb 7 13:42:27 Syslogd start up
Feb 7 13:51:59 kernel: ath_bstuck_tasklet: stuck beacon; resetting (bmiss count 36)
Feb 7 13:52:01 kernel: ath_bstuck_tasklet: stuck beacon; resetting (bmiss count 36)
Feb 7 13:52:05 syslog: Found beacon stuck, down and up the VAP interface.
Feb 7 14:47:01 kernel: ath_bstuck_tasklet: stuck beacon; resetting (bmiss count 36)
Feb 7 14:47:02 kernel: ath_bstuck_tasklet: stuck beacon; resetting (bmiss count 36)
Feb 7 14:47:05 syslog: Found beacon stuck, down and up the VAP interface.
Feb 7 15:22:53 kernel: ath_bstuck_tasklet: stuck beacon; resetting (bmiss count 36)
Feb 7 15:22:56 syslog: Found beacon stuck, down and up the VAP interface.
Feb 7 16:15:19 kernel: ath_bstuck_tasklet: stuck beacon; resetting (bmiss count 36)
Feb 7 16:15:33 syslog: Found beacon stuck, down and up the VAP interface.
Feb 7 12:27:25 Syslogd start up
Feb 7 14:06:18 kernel: ath_bstuck_tasklet: stuck beacon; resetting (bmiss count 36)
Feb 7 14:06:23 syslog: Found beacon stuck, down and up the VAP interface.
Feb 7 14:44:28 kernel: ath_bstuck_tasklet: stuck beacon; resetting (bmiss count 36)
Feb 7 14:44:31 syslog: Found beacon stuck, down and up the VAP interface.
Feb 7 15:09:18 kernel: ath_bstuck_tasklet: stuck beacon; resetting (bmiss count 36)
Feb 7 15:09:24 syslog: Found beacon stuck, down and up the VAP interface.
Feb 7 15:42:23 kernel: ath_bstuck_tasklet: stuck beacon; resetting (bmiss count 36)
Feb 7 15:42:25 syslog: Found beacon stuck, down and up the VAP interface.
Feb 7 16:52:18 kernel: ath_bstuck_tasklet: stuck beacon; resetting (bmiss count 36)
Feb 7 16:52:24 syslog: Found beacon stuck, down and up the VAP interface.
Feb 7 16:53:05 kernel: ath_bstuck_tasklet: stuck beacon; resetting (bmiss count 36)
Feb 7 17:20:05 kernel: ath_bstuck_tasklet: stuck beacon; resetting (bmiss count 36)
Feb 7 17:20:08 syslog: Found beacon stuck, down and up the VAP interface.
Feb 7 17:23:34 kernel: ath_bstuck_tasklet: stuck beacon; resetting (bmiss count 36)
Feb 7 17:23:39 syslog: Found beacon stuck, down and up the VAP interface.
Feb 7 21:21:28 kernel: ath_bstuck_tasklet: stuck beacon; resetting (bmiss count 36)
Feb 7 21:21:30 syslog: Found beacon stuck, down and up the VAP interface.
Feb 8 09:55:23 kernel: ath_bstuck_tasklet: stuck beacon; resetting (bmiss count 36)
Feb 8 09:55:29 syslog: Found beacon stuck, down and up the VAP interface.
These log messages appear on both WAP4410N-A V02 and WAP4410N-E V02 devices.
I noticed that when the “beacon stuck” message appears, wireless traffic locked up 10-15 minutes prior to the message’s appearance in the log, and the SSID drops for 4-6 minutes after the message appears.
Is there anything that can be done to address the issue?

1) LAN port speed doesn't appear to have any effect
2) Forcing a connection type doesn't seem to have any effect. This is also rather impractical.
3) I don't have that option (though there is a TKIP/AES mixed option). Either way, I'd rather not have to resort to using a weaker encryption method.
4) No effect.
I did manage to find some information about the error message (older versions of firmware didn't even offer that clue).
http://www.dd-wrt.com/wiki/index.php/Advanced_wireless_settings#Beacon_Interval
I ended up increasing the beacon interval from 100ms to 500ms under Wireless > Advanced Settings.
The wifi analyzer app on android seems to keep dropping the SSID when the beacon interval is set that high, so I might have to adjust it to find a good balance.
However, while it was set to 500ms, none of the access points went down for two days.
[edit]: I reduced the beacon interval incrementally down to 300ms. It started locking up at 250ms.

Firmware update for HP OfficeJet Pro 8000 wireless to fix load paper issue - as for the 8500?

Is there any hope that that soon will be a firmware update to fix the issues loading paper and the printheads for the HP OfficeJet Pro 8000 wireless printer?
A month or two ago there came a firmware update to the HP OfficeJet Pro 8500 wireless, which has some of the same issues,
and allegedly should have the much of the same load-mechanism as the 8000 printer.
It would be great, as we are on the fourth (4) replacement of this HP 8000 printer. For example, it would be great if we could use normal (80g) paper and not has to use (HP) 90g paper, as this prevents us from using the duplexer and only print on one side.

Thanks for the advice to contact HP tech support!
I have tried in multiple ways since November 2009 to contact HP, when I got the first (of 4) printers. The first 3 printers was subsequently replaced.
Finally in late June 2010 I got the message that there was coming an firmware update for Windows, but not for Mac's. The firmware should improve among other things the paper pick up (load paper issue) and the print-heads life.
I have applied the Windows firmware on the printer from a pc, but still seems to have load-paper issues, even using HP Bright White paper, when printing from Mac's. I have not tested the printing from a pc, but assumes that a firmware upgrade the printer, and are not specific to a certain OS.

Aluminum Wireless Keyboard not working properly after Firmware update 1.1

Hi,
Well, as the subject says, my keyboard is not working properly after I updated the firmware. The problem is that several keys (delete, down arrow, brackets and apostrophe) stopped working right after I installed the update. I never dropped it or hit it. And I did not stop or interrupt or did anything during the install. I take very good care of it.
I have already tried toubleshooting with the support page, restarting the iMac, taking off the batteries, setting it up with bluetooth again, going back a week with time machine and to reinstall the firmware. So, if you have something new for me to try, I will really apreciate it.
Thanks in advance.
Franco.

I have 24" iMac with the Apple wireless M&KB - I know this is basic but have you tried a fresh set of batteries? My KB will refuse to establish connection when batteries are on the weak side the firmware update may just be a co incidents. If your wireless mouse is working OK then I would guess the blue tooth is functioning.
Not sure about the 10.49 download - are your other file downloads completing properly? Are there any error messages?
Steve

Unable to connect to wireless printer or download firmware update

Got an HP C4580 all-in-one wireless. Can see the device wirelessly using the HP Utility, but cannot print to it "Printer is not connected" or see it using System Preferences. Have downloaded the firmware update, but when running this it hangs at the device discovery stage (even when connected through USB) and therefore I cannot update the firmware on the printer.
The printer will print when connected throught USB.
Driving me nuts!
Jim

Thanks for the information. Network is not complex. Cable Broadband connected by ethernet to AirPort with an additional AirPort (Time Capsule) to extend the range of the network through the house.
I did all as you suggested, and this worked fine (once) for twoMacBook Pros, and two iMacs, and now won't work on any of these again (one day later).
Am reluctant to reset the printers again, as my print list includes five printers from work, which requires the IT Dept to reconfigure again if I clear them once more.
HP Utility can apparently connect to the printer and give me device information, I just cannot print to, or scan from the printer.
As advised before, I cannot install the firmware update (it may alreadybe installed - how would I know)? It just hangs when trying to seek the printer type.
The lack of wireless printing is driving me nuts. Before the problem arose with complete loss of service, I went through a period of a few weeks where the printer would not connect after it had printed a job, and had to be switched off, then back on again before working wirelessly. Now nothing.
Kind regards,
Jim

Security and firmware updated... Now no wireless network

Last night I did my security updates and a MacBook SMC Firmware update as well as the airport extreme update and daylight savings time update. After the update was done, I can't even see my old wireless network that I was connecting to fine before the update. SO... I checked my wife's ibook and it still connects, my pc still connects, and what really baffles me is that my macbook connects when plugged in through the ethernet, it just won't see it wirelessly!?!?!?!? The firmware update was version 1.1 and the other versions were 1.0. I looked at some posts and a lot were saying to repair permissions, I did, and nothing... I am still a newer user of macs, so please be a little more detailed in replies. Thanks!!!

Shame on Mac... here is how you fix this problem, saw it in another thread... hope this helps others experiencing the same problem...
http://www.macfixit.com/article.php?story=20070202133651898

My aluminum wireless don't work after the firmware update !!

i just bought a new wireless keyboard and i found that there an update(Firmware update 1.0) and when i update the keyboard the keyboard didn't work !
the update took a long time to update ! (approx. 20 min!!)
can you help me !
Regards ,,

Hello Mohammed:
I suspect that the update was, somehow, interrupted.
I suggest you contact Applecare as the KB is new and under warranty.
Barry

Apple Wireless Keyboad (A1255) - Firmware update in Vista?

How do I go about updating the firmware of the Wireless keyboard in Vista to the latest version? Is this just done automatically by the Apple Software Update?

Yeah i think were all having the same issue after that Firmware update.
Surely if we can revert to an older firmware, we can get the wireless back. It still means i have to print one page at a time from OSX and sometimes reboot the printer - but thats better than not being able to print at all hey.
The new firmware is on their FTP under this link:
ftp://ftp.hp.com/pub/softlib/software12/COL22689/bi-59777-2/HP1022_FW_Upgrade_Security_20120928.exe
Ive had a quick look on the FTP using a client hoping i could find older firmware.
Does anyone have the name of the older firmware that worked, i think i can use filezilla to search the FTP?
Really dont want to set it up shared on my mac or get rid of it - come on HP, sort this out.
Thanks for youe time guys.
Warren

Wireless keyboard firmware update

My wireless keyboard was working fine until I did the recommended firmware update. Profiler says that it loaded properly, but now it presses and repeats keys that I did not press. If I turn it off, the keystrokes stop. I tried re-pairing the keyboard, re-booting the computer, taking out the batteries and restarting. It seams that I never should have done the upgrade. Any ideas?

I've noticed the same problem with my keyboard. It will start repeating the last character I type, then after like 50 repeats, will disconnect and reconnect.

Aluminium Wireless Keyboard Wakes iMac After Firmware Update

Hi All,
Not sure if anyone is experiencing the same problem, but when I put my iMac to sleep now, it wakes up randomly saying that it has lost connection with my keyboard. I have had zero issues since buying by computer, and I really dont want to have to uncheck the 'allow bluetooth devices to wake computer' option.
Is there any way to downgrade the keyboard firmware?
Apple support please help!
Thanks,
Rob

I also have this problem. Since I have a wireless mouse I just turn off the keyboard when I'm done using it, and use the mouse to wake the computer. Since I've started doing this I've checked the Console for abnormal wake events in the mornings, and none have occurred (in the past couple weeks). I would have at least one a night when I left the keyboard on. I didn't notice it before the last firmware update (don't know the number right off), but it could have been occurring before.
Also, many times when I put my computer to sleep with the keyboard or the mouse, it will immediately wake back up. I've also noticed that when the keyboard is off this doesn't happen.

Firmware Update for Zen Wireless

I just bought a new 6gb Zen Wireless that crashes when trying to fast forward a bookmarked audio book. Tech support has told me that the problem is a known problem (isn't that nice) and will be fixed with the next firmware update. Any idea when the next update is coming. If it's more that two weeks, I'm returning it and buying one that does work.
Chuck

Alrichi,
If your player already showing the exact same firmware version as with the download then you would already have the same firmware version. You do not need to update again.
Jason

Tactic rage 3d wireless firmware update

Similar Messages

Maybe you are looking for