TAF 11gr2 RAC
Hi Gurus,
Suppose if i create a service with srvctl add service and enabled it as TAF ,and use it to connect to 11gr2 RAC database from JDBC thin client.the instance to which connection got established got failed or crashed and the session will failover to other node and the result of the query will be return back.So even JDBC thin driver is giving me the resultset after reestabilshing the connection to surviving instance so what is it that JDBC thin client doesn't support for TAF and OCI supports it,even same thing will happen with (session failover)OCI right?how is TAF different then FCF?Please help me in understanding this concept of jdbc thin and OCI and FCF.
Thanks
in fact I had the exact same question.. it's kinda confusing in the documentation..
from what I gather from the docs...
TAF supports JDBC thick clients only.. So does that mean I can have a type-2 driver based JDBC connection pool and expect runtime load balancing by receiving FAN using ONS ?
what's this thing about TAF only working with OCI clients? Does that include type-2 driver based java clients too ?
What't the difference between OCISession pools and type-2 driver based connection pools..does the later use the first ?
I have seen FCF/ICC work with JDBC type-4 driver in that situation.. that is , it does runtime load balancing by receiving FAN using ONS.
Similar Messages
-
TAF with FAN in oracle 11gr2 RAC
dear all,
our enviornment is 11GR2 RAC with 2 ndoe RAC. it has four different applications accessing the database.
so for each application i have created services as A,B,C,D.
services in NODE1- Prefered service in NODE2 -Prefered
A B
C D
services in NODE1- available service in NODE2 -Available
B A
D C
now i have the services as described above.
each services are created with
srvctl add service -d DB -s A -r NODE1 -a NODE2 –P BASIC –y AUTOMATIC
srvctl modify service -d DB -s A -q TRUE -P BASIC -e SELECT -z 180 -w 5 -j LONG
srvctl start service -d DB -s A
now i have enable server-side TAF with FAN. so do i need to provide the TNS entries to application layer namely oracle client
as below
AP =
(DESCRIPTION =
(ADDRESS=(PROTOCOL=TCP)(HOST=cluster01-scan)(PORT=1521))
(LOAD_BALANCE = YES)
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = TEST)
(FAILOVER_MODE =
(TYPE = SELECT)(METHOD = BASIC)(RETRIES = 180)(DELAY = 5))))
or
do i need to add the above TNS entries in serverside tnsnames.ora file?
1) the connection from jdbc thin or session established via JDBC thin is not having the TAF details in v$session view.
SELECT machine, failover_method, failover_type,
failed_over, service_name, COUNT(*)
FROM v$session
GROUP BY machine, failover_method, failover_type,
failed_over, service_name;
if i execute the above query i couldnt find any session is having failover_method as BASIC and FAILOVER_TYPE as select.
all my application tier is using JDBC thin to access the database.
if i use oracle client from application server to access the database i could see my session having FAILOVER_METHOD as BASIC and FAILOVER_TYPE as SELECT.
so please provide me any realtime example for accessing database using JDBC thin with TAF and FAN properties for their sessions.Hi,
1.) No if you define a service with TAF, then the TAF information will be provided to the client, without having to specify it again in the TNSNAMES.ora (neither client nor server).
However it does not hurt, if you have specified it additionally (it just makes it more difficult if you want to change something, because the client side does not get updated).
See this whitepaper for more information:
http://www.oracle.com/technetwork/database/clustering/overview/awm11gr2-130711.pdf
2.) However it seems you have forgotten to specify something with the service (you seem to be missing -m):
srvctl add service -h
Adds a service configuration to the Oracle Clusterware.
-P {NONE | BASIC | PRECONNECT} TAF policy specification
-e <Failover type> Failover type (NONE, SESSION, or SELECT)
-m <Failover method> Failover method (NONE or BASIC)
-w <integer> Failover delay
-z <integer> Failover retries
Regards
Sebastian -
11gR2 RAC installation in AIX fails while running root.sh on node2
Hi
We are in the process on installing 11gR2 RAC on AIX 6.1
But the installation is failing on node 2while running root.sh with the following error.
DiskGroup DATA creation failed with the following message:
ORA-15018: diskgroup cannot be created
ORA-15017: diskgroup "DATA" cannot be mounted
ORA-15003: diskgroup "DATA" already mounted in another lock name space
Configuration of ASM failed, see logs for details
Did not succssfully configure and start ASM
CRS-2500: Cannot stop resource 'ora.crsd' as it is not running
CRS-4000: Command Stop failed, or completed with errors.
Command return code of 1 (256) from command: XXXXX/grid/bin/crsctl stop resource ora.crsd -init
Stop of resource "ora.crsd -init" failed
Failed to stop CRSD
Please help
RegardsHI,
the second node (second root.sh) should not want to "create" the diskgroup data, since it is already there.
This pretty much sounds like you tried to start both root.sh (on the first node and on the second node) at the same time, not waiting for it to finish on the first node.
It is important, that before you start the root.sh on the second node, it has to be finished successfully on the first node for the cluster to update the information.
Sebastian -
How to migrate data from oracle 9i database to new machine 11gr2 RAC ASM
Hi Expert
I need your expertise to advise me what is the best method to move data from oracle 9i database to new machine running oracle 11r2 RAC database with ASM.
Currently my production server running on HPUX ORACLE 9I database with normal file system. My new server is running SUN SOLARIS SPACR 64 bit ORACLE 11gr2 RAC with ASM. What is best method to move data over so it will be consistent. Any guide can refer.
Regard
WilliamHi William,
See the note in metalink Migration of Oracle Database Instances Across OS Platforms [ID 733205.1] to saw the Endian Format of your OS. If is the same you can use the RMAN to convert the database to another OS, if not the only option is using export/import (Transportable Tablespaces).
To upgrade from 9i to 11g, see the note 837570.1 - Complete Checklist for Manual Upgrades to 11gR2.
To migrate your FS to ASM the only way is using RMAN, so see the note - How to move a datafile from a file system to ASM [ID 390274.1].
Hope this help you.
Best Regards,
Ruben Morais -
Oracle 11gR2 RAC in LDOM Network issue
Hi, Requesting your expert advise regarding this configuration.
We are implementing LDOM 2.2 on two SPARC T4-4 for Oracle 11gR2 RAC; Solaris 10 U10 on both control and guest domain. The setup for each primary/control domain is: Two 10g links aggregated and have four VLAN trunked on the aggregate. vSwitch created using the aggr as the device as following per T4-4:
NOTE: VLAN 1501 is for data connection and VLAN 10 is for heartbeat for one RAC cluster and VL 1601 and 11 is for another RAC. all together four LDOMS.
ldm add-vswitch vid=1501,1601,10,11 net-dev=aggr1 primary-vsw0 primary
ldm add-vnet pvid=1501 vnetprod primary-vsw0 guest1
ldm add-vnet pvid=10 vnethb primary-vsw0 guest1
ldm add-vnet pvid=1601 vnetprod primary-vsw0 guest2
ldm add-vnet pvid=11 vnethb primary-vsw0 guest2
vnet inside the LDOM are not tagged:
vnet1: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 3
inet 10.220.128.20 netmask ffffff80 broadcast 10.220.128.127
ether 0:14:4f:f9:ec:7f
vnet2: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 4
inet 192.168.2.11 netmask ffffff80 broadcast 192.168.2.127
ether 0:14:4f:fb:2b:8f
Here is the whole configuration:
root@gp-cpu-suh004 # ldm -V
Logical Domains Manager (v 2.2.0.0)
Hypervisor control protocol v 1.9
Using Hypervisor MD v 1.4
System PROM:
Hostconfig v. 1.2.0. @(#)Hostconfig 1.2.0.a 2012/05/11 07:34
Hypervisor v. 1.11.0. @(#)Hypervisor 1.11.0.a 2012/05/11 05:28
OpenBoot v. 4.34.0 @(#)OpenBoot 4.34.0 2012/04/30 14:26
root@gp-cpu-suh004 # ldm ls
NAME STATE FLAGS CONS VCPU MEMORY UTIL UPTIME
primary active -n-cv- UART 32 16G 2.5% 48m
oidrac1 active -n---- 5000 32 16G 0.0% 27m
root@gp-cpu-suh004 # ldm ls -l
NAME STATE FLAGS CONS VCPU MEMORY UTIL UPTIME
primary active -n-cv- UART 32 16G 3.1% 48m
SOFTSTATE
Solaris running
UUID
e73421fe-7003-e748-be7e-801fee5bfcc7
MAC
00:21:28:f1:95:26
HOSTID
0x85f19526
CONTROL
failure-policy=ignore
extended-mapin-space=off
cpu-arch=native
DEPENDENCY
master=
CORE
VCPU
MEMORY
RA PA SIZE
0x20000000 0x20000000 16G
CONSTRAINT
threading=max-throughput
VARIABLES
auto-boot-on-error?=true
auto-boot?=true
boot-device=/pci@400/pci@1/pci@0/pci@0/LSI,sas@0/disk@w5000cca0251e7a29,0:a
keyboard-layout=US-English
nvramrc=." ChassisSerialNumber 1207BDYFFE " cr
use-nvramrc?=true
IO
DEVICE PSEUDONYM OPTIONS
VCC
NAME PORT-RANGE
primary-vcc0 5000-5100
VSW
NAME MAC NET-DEV ID DEVICE LINKPROP DEFAULT-VLAN-ID PVID VID MTU MODE INTER-VNET-LINK
primary-vsw-mgmt 00:14:4f:fb:75:c0 igb1 0 switch@0 1 1 1500 on
primary-vsw0 00:14:4f:fa:33:8b aggr1 1 switch@1 1 1 1501,1601,10,11 1500 on
VDS
NAME VOLUME OPTIONS MPGROUP DEVICE
primary-vds0 rootoid /dev/dsk/c14t50060E8005BFAA04d1s2
data_oid /dev/dsk/c14t50060E8005BFAA04d2s2
ocr_oid /dev/dsk/c14t50060E8005BFAA04d3s2
VCONS
NAME SERVICE PORT
UART
NAME STATE FLAGS CONS VCPU MEMORY UTIL UPTIME
oidrac1 active -n---- 5000 32 16G 0.0% 27m
SOFTSTATE
Solaris running
UUID
0fcbbf21-14a2-eb21-f544-d4424212f3ef
MAC
00:14:4f:f9:1b:d4
HOSTID
0x84f91bd4
CONTROL
failure-policy=ignore
extended-mapin-space=off
cpu-arch=native
DEPENDENCY
master=
CORE
CID CPUSET
VCPU
VID PID CID UTIL STRAND
MEMORY
RA PA SIZE
0x20000000 0x420000000 16G
CONSTRAINT
threading=max-throughput
VARIABLES
auto-boot?=true
boot-device=disk:a
keyboard-layout=US-English
NETWORK
NAME SERVICE ID DEVICE MAC MODE PVID VID MTU LINKPROP
vnet1 primary-vsw-mgmt@primary 0 network@0 00:14:4f:fa:61:77 1 1500
vnetprod primary-vsw0@primary 1 network@1 00:14:4f:f9:ec:7f 1501 1500
vnethb primary-vsw0@primary 2 network@2 00:14:4f:fb:2b:8f 10 1500
DISK
NAME VOLUME TOUT ID DEVICE SERVER MPGROUP
oneidrootdisk rootoid@primary-vds0 0 disk@0 primary
oid_data data_oid@primary-vds0 1 disk@1 primary
oid_ocr ocr_oid@primary-vds0 2 disk@2 primary
VCONS
NAME SERVICE PORT
oidrac1 primary-vcc0@primary 5000
root@gp-cpu-suh004 # ldm ls-services
VCC
NAME LDOM PORT-RANGE
primary-vcc0 primary 5000-5100
VSW
NAME LDOM MAC NET-DEV ID DEVICE LINKPROP DEFAULT-VLAN-ID PVID VID MTU MODE INTER-VNET-LINK
primary-vsw-mgmt primary 00:14:4f:fb:75:c0 igb1 0 switch@0 1 1 1500 on
primary-vsw0 primary 00:14:4f:fa:33:8b aggr1 1 switch@1 1 1 1501,1601,10,11 1500 on
VDS
NAME LDOM VOLUME OPTIONS MPGROUP DEVICE
primary-vds0 primary rootoid /dev/dsk/c14t50060E8005BFAA04d1s2
data_oid /dev/dsk/c14t50060E8005BFAA04d2s2
ocr_oid /dev/dsk/c14t50060E8005BFAA04d3s2
root@gp-cpu-suh004 # dladm show-link
vsw0 type: non-vlan mtu: 1500 device: vsw0
vsw1 type: non-vlan mtu: 1500 device: vsw1
vsw1501001 type: vlan 1501 mtu: 1500 device: vsw1
igb0 type: non-vlan mtu: 1500 device: igb0
igb1 type: non-vlan mtu: 1500 device: igb1
qlge0 type: non-vlan mtu: 1500 device: qlge0
qlge1 type: non-vlan mtu: 1500 device: qlge1
qlge2 type: non-vlan mtu: 1500 device: qlge2
qlge3 type: non-vlan mtu: 1500 device: qlge3
aggr1 type: non-vlan mtu: 1500 aggregation: key 1
root@gp-cpu-suh004 # ifconfig -a
lo0: flags=2001000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv4,VIRTUAL> mtu 8232 index 1
inet 127.0.0.1 netmask ff000000
igb0: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 2
inet 10.223.12.14 netmask ffffff00 broadcast 10.223.12.255
ether 0:21:28:f1:95:26
vsw1501001: flags=201000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4,CoS> mtu 1500 index 3
inet 10.220.128.9 netmask ffffff80 broadcast 10.220.128.127
ether 0:14:4f:fa:33:8b
root@gp-cpu-suh004 # netstat -nr
Routing Table: IPv4
Destination Gateway Flags Ref Use Interface
default 10.220.128.1 UG 1 7
10.220.128.0 10.220.128.9 U 1 5 vsw1501001
10.223.0.0 10.223.12.1 UG 1 2
10.223.12.0 10.223.12.14 U 1 1 igb0
224.0.0.0 10.220.128.9 U 1 0 vsw1501001
127.0.0.1 127.0.0.1 UH 8 261 lo0Yes, I can connect to the vswitch interface on the control domain. I didn't specify any PVID because my understanding is that PVID will tag any frame with the PVID VLAN by default. basically the PVID for this interface is 1.
Here's the VNET config for the other LDOM in the RAC cluster:
VSW
NAME MAC NET-DEV ID DEVICE LINKPROP DEFAULT-VLAN-ID PVID VID MTU MODE INTER-VNET-LINK
primary-vsw-mgmt 00:14:4f:f9:91:fa igb1 0 switch@0 1 1 1500 on
primary-vsw0 00:14:4f:fa:8e:cf aggr1 1 switch@1 1 1 1501,1601,10,11 1500 on
NETWORK
NAME SERVICE ID DEVICE MAC MODE PVID VID MTU LINKPROP
vnet1 primary-vsw-mgmt 0 00:14:4f:fb:65:6d 1
vnetprod primary-vsw0 1 00:14:4f:fa:2b:02 1501
vnethb primary-vsw0 2 00:14:4f:f8:12:c1 10
Thanks for reviewing my configuration. -
Problem of Copying the Original VM to 2nd VM in Oracle 11gR2 RAC system
Folks,
Hello. I have been installing Oracle Database 11gR2 RAC system using 2 nodes that are 2 Virtual Machines (rac1 and rac2) on the top of VMPLayer 3.
I follow the tutorial http://appsdbaworkshop.blogspot.com/2011/10/11gr2-rac-on-linux-56-using-vmware.html to do.
The original Virtual Machine rac1 has run correctly. I configure rac1 network (eth0 and eth1) by opening VM rac1 and using command "[root@rac1\] #neat" as root user to invoke the network configuration.
For the second Virtual Machine rac2, I simply copy all files in "C:\VM\rac1" into "C:\VM\rac2". Then I have done the following:
1) In the directory "C:\VM\rac2", rename "rac1.vmx" to "rac2.vmx".
2) Change display name from "rac1" to "rac2" in the file "rac2.vmx".
The next thing to do for rac2 is to open the Virtual Machine rac2 and configure its network (eth0 and eth1) by using the command "[root@rac2\]#neat" as root user.
But by this step, I don't understand how to open the Virtual Machine rac2 so that can configure its network (eth0 and eth1).
Can any folk tell me how to open the VM rac2 to configure its network by this step ?
Thanks.Folks,
Hello. Thanks a lot for replying.
The public IP for eth0 and private IP for eth1 in the file "/etc/hosts" are as follows:
rac1 eth0 192.168.138.35 eth1 192.168.137.35
rac2 eth0 192.168.138.36 eth1 192.168.137.36
In rac1, I have added 2 entries in /etc/hosts as following:
#VIP for eth0
192.168.138.130 rac1-vip.localdomain rac1-genetic-vip
192.168.138.131 rac2-vip.localdomain rac2-cellar-vip
Then I execute the command: [root@rac1 /]# ping rac2
Output:
PING rac2.localdomain (192.168.138.36) 56(84) bytes of data
From rac1.localdomain (192.168.138.35) icmp_seq=1
Destination Host Unreachable
In rac2, I try to add the above 2 entries in /etc/hosts. But cannot save it. The following error message comes up:
"E45: readonly option is set (add ! to override)".
My questions are:
First, do I need to add VIP in the file "/etc/hosts" for both rac1 and rac2 ?
Second, why rac1 still cannot reach rac2 after add VIP in /etc/hosts for rac1 ?
Third, why the file "/etc/hosts" in rac2 is read-only ? How to change it to be editable ?
Thanks. -
Got minus one from a read call error in ORACLE 11gr2 RAC
dear all,
im facing typical issue in my newly built RAC enviornment (11GR2 on linux 64-bit).
its a typical 2-node RAC setup. whenever application server trying to establish connection , im facing below error.
Got minus one from a read call error.
due to this , we are unable to proceed.
please share your knowlegable thoughts about this issue. i have faced this issue several times in STANDALONE systems and i have rectified it.
but in 11gr2 RAC setup i have no clue on how to resolve.
Thank you all once again842949 wrote:
dear all,
im facing typical issue in my newly built RAC enviornment (11GR2 on linux 64-bit).
its a typical 2-node RAC setup. whenever application server trying to establish connection , im facing below error.
Got minus one from a read call error.
due to this , we are unable to proceed.
please share your knowlegable thoughts about this issue. i have faced this issue several times in STANDALONE systems and i have rectified it.
but in 11gr2 RAC setup i have no clue on how to resolve.
Thank you all once againI am sorry to see that COPY & PASTE are broken for you.
It is really, Really, REALLY difficult to fix a problem that can not be seen.
use COPY & PASTE so we can see what you do & how Oracle responds.
Handle: 842949
Status Level: Newbie
Registered: Mar 9, 2011
Total Posts: 7
Total Questions: 4 (4 unresolved)
so many questions & without ANY answers.
http://forums.oracle.com/forums/ann.jspa?annID=718
Edited by: sb92075 on Jun 22, 2011 9:45 PM -
SCAN Name issue in Oracle 11gR2 RAC Installation
Hi,
I am trying to install Oracle 11gR2 RAC on VM ware and I got the INS-40922 (Invalid SCAN name). Do I need to create the SCAN name prior to the installation?
I have public,private, and VIP's. I am not sure how I create this SCAN Name. Please share your thoughts
ThanksDuring installation of grid infrastructure SCAN will be automatically created. If you are using DNS then put the scan name and scan ip addresses entries in DNS . If you are not using dns/gns then put scanname and scan ipadress hosts file on each node in the cluster. Before installation, you should not be able to ping scan ipadresses.
-
Oracle 11gR2 RAC - R language integration
Hello,
We want statistical language R integration with oracle database. Does this come with default installation of oracle database Oracle 11gR2 RAC ?
OR it requires EXADATA - BIGDATA (oracle appliance)?
Kindly let us know steps for installation /enabling R language ? Basically we are looking for 3 options (transparency, In-database, embedded). Optimal option choice is done automatically depending on R language script (I think R script needs to have different calls?)
ThanksPlease do NOT duplicate your questions here.
R is a language. Oracle is a database. You store data in a database. You write programs [using a language such as R] to extract and manipulate data from the database. -
Oracle 11gR2 RAC VM and SCAN and DNS and /etc/hosts (two) setup questions
Hi,
I am looking forward to setting up two Oracle 11gR2 RAC instances
on my Oracle VM test machine.
I plan on using the Oracle 11gR2 RAC VM template.
I want the final Oracle 11gR2 RAC instances to have SCAN that uses DNS.
The DNS will be pre-installed in the JeOS.
My first simple question about the setup is the following.
In my DNS name file, for example,
/var/named/chroot/var/named/milkyway.univ.db
do I need to provide the racnode1 and racnode2 information,
for example,
# DNS name file (snippet)
myjeos IN A 192.168.1.150
racnode1 IN A 192.168.1.161
racnode1-vip IN A 192.168.1.163
racnode2 IN A 192.168.1.162
racnode2-vip IN A 192.168.1.164
rac-scan IN A 192.168.1.131
rac-scan IN A 192.168.1.132
rac-scan IN A 192.168.1.133
Or, can I just provide only the rac-scan information
# DNS name file alternate (snippet)
myjeos IN A 192.168.1.150
rac-scan IN A 192.168.1.131
rac-scan IN A 192.168.1.132
rac-scan IN A 192.168.1.133
What I am getting at is the following.
Within the install process, will racnode1, racnode1-vip, racnode2,
and racnode2-vip host names and their IP address be written
to the RAC instances /etc/hosts files? (So I should not bother
to put them in the DNS name file like '# DNS name file alternate (snippet)'?)
Or, should I put the racnode and racnode-vip host names and IP addresses
in the DNS name file like '# DNS name file (snippet)'?
The second question is the following.
Are the cluster name and the scan name allowed to be different?
Currently, I would plan them to be different,
for example, rac-cluster and rac-scan.
Or, are they required to be the same,
for example, rac-cluster and rac-cluster.
Thank you.
AIMAIM wrote:
do I need to provide the racnode1 and racnode2 information,
Or, can I just provide only the rac-scan information You need to provide all of it in DNS, because other hosts in your network will need to be able to resolve all of the normal, VIP and SCAN addresses for your RAC nodes. We write this data out to /etc/hosts just to reduce the amount of round-trip DNS requests the cluster nodes make for themselves.
Are the cluster name and the scan name allowed to be different?They can be different. -
Oracle 11gR2 RAC with Sun clsuter 3.3 clsetup not showing ASMDiskGroup RS
Hello,
I am installing Oracle 11gR2 RAC on Solaris cluster 3.3 with hardware RAID and ASM
I was able to register rac-famework-rg and crs-framework-rg.
Oracle RAC is up and running (confirmed from crs_stat -t -v)
However, while creating option 5. Automatic Storage Management (ASM) on clsetup, I was getting ERROR: ASM is either not installed or the installation is invalid!
I have created the asm-inst-rg with resource asm-inst-rs and asm-dg-rg with resources asm-dg-fra, asm-dg-data and asm-dg-crs using CLI. Please find the complete clrg and clrs status output below:
root@rac1 # clrg status
=== Cluster Resource Groups ===
Group Name Node Name Suspended Status
rac-framework-rg rac1 No Online
rac2 No Online
asm-inst-rg rac1 No Online
rac2 No Online
asm-dg-rg rac1 No Online
rac2 No Online
root@rac1 # clrs status
=== Cluster Resources ===
Resource Name Node Name State Status Message
crs_framework-rs rac1 Online Online
rac2 Online Online
rac-udlm-rs rac1 Online Online
rac2 Online Online
rac-framework-rs rac1 Online Online
rac2 Online Online
asm-inst-rs rac1 Online Online - +ASM1 is UP and ENABLED
rac2 Online Online - +ASM2 is UP and ENABLED
asm-dg-fra rac1 Online Online - Mounted: FRA
rac2 Online Online - Mounted: FRA
asm-dg-crs rac1 Online Online - Mounted: CRS
rac2 Online Online - Mounted: CRS
asm-dg-data rac1 Online Online - Mounted: DATA
rac2 Online Online - Mounted: DATA
Once I reach clsetup option 6: Resources for Oracle Real Application Clusters Database Instances, I was able to select cluster db name, oracle home, SID for both nodes, and it listed the asm-inst-rg and asm-inst-rs for selection of "Specify Oracle ASM Instance Resource".
The problem is the the next selection which is "Specify Oracle ASM Disk Group Resources" which does NOT list any asm-dg-rg or asm-dg-fra or anything, instead, it throws error "No existing disk-group resources available for selection. Run ASM subwizard create new resource(s) and come back to this panel for the selection."
Kindly guide me to create Resources for Oracle Real Application Clusters Database Instances either in CLI or clsetup
Thanks and Regards
Ushas SymonSolaris Cluster 3.3 u1 solved the issue.
The problem right now I am facing is IPMP on the public interface.
When I remove the cable on the bge0, the ip on bge0 and the SCAN IP's are plumbed to bge1 which is in sc_ipmp0, but NOT the virtual IP!!! and the listeners on both nodes go offiline!!!
any inputs on the configuration will be highly appreciated..
Thanks and Regards
Ushas Symon -
Hello,
We would like to know if Oracle 11gR2 RAC supports timeseries data storage and time-series functions. Timeseries storage is quite different - in terms of storage optimization - block storages, compressions, columnar databases and others. Time-series functions like regressions, data-mining. Does these options come by default or we require statistical language R integration?
Thanks937054 wrote:
Hello,
1. Usally time-series data goes in multiple millions, so timeseries databases like FAME,KDB,SYBASE-IQ are used. Does oracle11gr2 provide storage optmizations, compressions, columnar database like FAME,KDB,SYBASE-IQ?
The only methods of optimization are partitioning of the data by some date or if data set is narrow (few columns)l enough, partitioned IOT.
2. http://www.oracle.com/us/corporate/press/1515738
Link is about R statistical language and data mining integration with Oracle database 11gR2. Does this come default during installation or with BigData - EXADATA? OR this is a seperate license?I am not sure about the licensing, you will need to ask your sales person, but it looks like it might be apart of ODM (oracle data mining - a licensed product)
Take a read through this case study.
http://www.oracle.com/technetwork/database/options/advanced-analytics/odm/odmtelcowhitepaper-326595.pdf?ssSourceSiteId=ocomen
>
Thanks -
Hello experts,
how to install oracle 11gR2 RAC on Laptop.what are the basic requirements.
RAM 6GB
i7 processer, 500GB Hard Disk
Thanks in Advance.Hi,
Also two more articles on the same portal with regards to 11gR2 RAC installations
[]http://www.oracle-base.com/articles/11g/oracle-db-11gr2-rac-installation-on-linux-using-nfs.php[]
[]http://www.oracle-base.com/articles/11g/oracle-db-11gr2-rac-installation-on-windows-2008-using-virtualbox.php[]
Regards, -
Oracle 11gR2 RAC: Running the script root.sh problem
Folks,
Hello. I am installing Oracle 11gR2 RAC using 2 Virtual Machines (rac1 and rac2 whose OS are Oracle Linux 5.6) in VMPlayer and according to the tutorial
http://appsdbaworkshop.blogspot.com/2011/10/11gr2-rac-on-linux-56-using-vmware.html
I have been installing Grid Infrastructure using runInstaller from step 1 to step 9 of 10 in both VM rac1 and rac2.
Now, I am running the script root.sh in VM rac1 and rac2 as below:
[root@rac1 /]# /u01/app/grid/root.sh
Output:
CRS-4123: ohasd is starting
FATAL: Module oracleoks not found
FATAL: Module oracleadvm not found
FATAL: Module oracleacfs not found
ACFS-9121: Failed to detect /dev/asm/.asm_ctl_spec
ACFS-9310: ADVM/ACFS installation failed.
ACFS-9311: not all components were detected after installation
'UpdateNodeList' was successful.
[root@rac1 /]#
[root@rac2 /]# /u01/app/grid/root.sh
Output:
CRS-4123: ohasd is starting
FATAL: Module oracleoks not found
FATAL: Module oracleadvm not found
FATAL: Module oracleacfs not found
ACFS-9121: Failed to detect /dev/asm/.asm_ctl_spec
ACFS-9310: ADVM/ACFS installation failed.
ACFS-9311: not all components were detected after installation
Start of resource "ora.asm_init" failed.
Failed to start ASM.
Failed to start Oracle Clusterware Stack.
[root@rac2 /]#
As we see the output above, rac1 and rac2 get the same problems. in addition, rac2 fails to start ASM and Clusterware stack. Thus, I have 2 questions:
First, the common problem for rac1 and rac2 :
1)Module "oracleoks, oracleadvm, oracleacfs" not found
2)/dev/asm/.asm_ctl_spec not detected
3)ADVM/ACFS installation failed
Do the above 3 factors affect Grid and DataBase Installation later ? If yes, how to solve these problems ?
Second, how to start ASM and Clusterware stack in rac2 ?
Thanks.you have 2 options:
1. OEL 5.6 comes with 2 kernels, the original Red Hat, and Oracle UEK, you can choose not to use UEK
or the one i would recommend:
2. Upgrade Grid Infrastructure,
*11.2.0.3.1* (patch 13348650, released about a 1 month ago) supports ACFS on UEK (starting with 2.6.32.200 IIRC) -
Oracle 11gR2 RAC : How to resume runInstaller to continue to install Grid ?
Folks,
Hello.
I am installing Oracle 11gR2 RAC using 2 Virtual Machines (rac1 and rac2 whose OS are Oracle Linux 5.6) in VMPlayer.
I have been installing Grid Infrastructure using runInstaller from step 1 to step 9 of 10 in both VM rac1 and rac2.
After finish running the script root.sh in VM rac1 and rac2, the Computer is shut down automaticall because I don't touch the keyboad for a long time. When I resume the Computer, runInstaller Wizard is gone. My question is:
How to resume runInstaller to continue to install Grid ?
Thanks.Hi!
You can't resume runInstaller.
You must Clear you envinronment, and try again.
Maybe you are looking for
-
If I click on an e-mail address link in a web page instead of a blank message opening I always get a pop up screen with a log-in for googlemail. I do not have and do not want a googlemail account. I just want to be able to send e-mails using Outlook.
-
Need A Smart Person To Help Me!!
So I want to setup a raid 0 with my computer setup but have some questions. I have 3 external drives, 500GB, 2TB, and 1TB. Can I partition the 2TB and 1TB and use the 500GB partition I make on each drive for the raid, so all 3 are 500GB? Can I also p
-
Aspect ratio in preview & export wrong
I have QT.movies shot @ HDV 1080i60, 1440 x 1080. I just read an article in VideoMaker Magazine to take advantage of Apple ProRes 422, you can take your HDV video into Compressor and render to Apple ProRes files. When I preview the .mov before I rend
-
Db_verify: PANIC: fatal region error detected; run recovery
We have an application that is using bdb. On one of the instances it frequently hits a panic condition. db_verify reports the following: # db_verify -o file.db db_verify: PANIC: fatal region error detected; run recovery db_verify -VSleepycat Software
-
Trying to add CSS styles to the online editor
I have some CSS styles I need to make available in the online editor, I have added the class names in the online editor settings and when my client goes to the create an email campaign the CSS styles I have listed are missing in the apply CSS class d