Tag insight and closing tags problem

I am a touch-typist, and as such, CF-Builder has a very irritating problem. Let me explain:
One of the nice things about CFEclipse is that it senses when you have entered a closing element (i.e., #, }, ], ", etc.) When this occurs, it automatically moves the cursor forward WITHOUT leaving a duplicate. The fact that builder does NOT do this is very frustrating. It requires you to remove hands from the keyboard to hit the right-arrow, or you have to turn off the closing tags in the preferences.
Other than that, seems like a pretty decent editor.

I couldn't agree more. It's the little things that matter...

Similar Messages

Importing swf file with skin and closed captioning problems

I created a flv file in Preimere and I pulled it into flash to create close captioning. When I publish it, it creates a swf file that I can open up on its own and it has the skin with the button to push to show the closed caption. When I try to bring that file into captivate, it doesnt bring in the skin and it just automatically shows the captions. How do I get it to bring the skin in with it?

Are you seeing this problem when you preview you project. or only after you publish it? If it is when you publish, is it in both the local version and/or in the web version?
Also, which version of Flash Catalyst? 1.0 or 5.5.?
Chris

10.5.2 wake/sleep and closed-lid problems

As of 10.5.2 my MBP no longer works correctly in closed lid mode using a hardware
setup that previously worked flawlessly. After plugging in power and video, plugging
in the USB keyboard seems to wake the system, but no video. I then must open the
lid, unplug the USB and video and try to get the system to respond. I often must cycle
the power to reset the system--very disturbing to do that.
Also as of 10.5.2, I have had to power-cycle the machine when it has refused to wake
in open-lid mode and this weekend I the entire machine froze (no mouse movement,
no expose, etc) in the middle of work using a graphics-intensive program and I had
to reboot by cycling the power.
A friend also reported similar issue in which the system would not respond after the
screensaver became active.
Are others seeing problems like these? I am beginning to suspect that the post-10.5.2
graphics update has problems.

I just wiped my HD and reinstalled everything besides the Graphics Update. I can now close the lid of my MBP and use my external monitor alone. The Graphics Update had made that impossible.
Further, I am in the habit of putting my MCP to sleep and putting it in a backpack in the morning, meeting friends for breakfast, and re-awakening it at the office. When I did get to my office, I found (as another user had on another thread) that the MBP, even closed, had woken itself up and was hot as heck. I am uncertain that sleep will work properly under 10.5.2, but I know that the display wackiness of the Graphics Update was driving me nuts. I will not install it until Apple fixes it.
I looked around for awhile for a way to uninstall the Graphics Update, but could not find it...I suspect it exists somewhere.
The 10.5.2 Combo update (343MB download) DOES NOT include the Graphics Update, and at this time, I seem quite ok with everything else updated.

Where can I get an Html error report of all the syntax and tag problems?

Where can I get an Html error report of all the syntax and tag problems?

Thank you for your answer.
Where is the DW validation for me?
My files are in my computer so I don’t have an external URL.
File > validation > as xml = closes DW... Maybe because it is not a correct command for HTML,
And
Window > results > validation = gives a partial mistakes (e.g. shows an open tag without closing tag, but doesn’t show a closing tag without an open tag).
Thank you.

Matching opening and closing tags in MXML

Is possible to match the opening and closing tag in MXML with Flash Builder 4.x?
In AS3 you can see the curly braces highlighted and you can type Ctrl+Shift+P to jump from one bracket to the other.
In DreamWeaver you can see the hierarchy for every HTML element, and you can click any HTML element to highlight the block inside.
I can see only icons with - and + for contract or expand the MXML blocks, but they are working wrong !

If you click the element in Outline view, it should highlight the entire tag for you. Is it not doing this in FB 4?

NMH305 mp3 TAG problem on Sony Bravia KDL-40HX700

Hi,
Need some help, i have a NMH305 streaming to a Sony Bravia KDL-40HX700 and have a problem with the mp3 tags for Artist not being shown during playback (always says Unknown) and the same in Bits to.
If start a mp3 file, the covers, the song title and the album name are correctly displayed BUT the Artist name and Bits is a blank field.
Thanks,
/Flomsen
I am really disappointed

Net2wolf wrote:
So, now i´ve checked some out.....
My Sony Receiver (STR-DA3600ES ) shows all Informations, my Blu-Ray (BDP-S470 also), my TV (EX715) dos´nt....
it´s a firmware-Problem inside TV, maybe Sony is the cisco in entertainment......
greetings from germany
wolf
I have talk to SONY and mail MP3 files to and that is not the TV firmware.
CISCO need to came up from the chair and make a new firmware soon
I am really disappointed

Div tags problem on centered layout

Like the title says, I'm working on a centered layout and I
need to place a div tag that has an overflow for scrolling. The
problem is what do I do so that it does just that. I tried using an
AP div tag but it doesn't follow the rest of the layout if you play
with the browser width. And if I simply put a div tag in my table,
I don't know how to put an overflow on it. I only have a limited
amount of space for the text, and I have too much text to simply
put it in the table. It's my first time working on a centered
layout, so I'm kind of at a lost right now. And that's the only
thing stopping me from putting it online.

> And if I simply put a div tag in
> my table, I don't know how to put an overflow on it.
<div style="overflow:scroll">
> I only have a limited
> amount of space for the text, and I have too much text
to simply put it in
> the
> table.
If that's the case, then you have a broken layout scheme, and
a usability
problem.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"cprime" <[email protected]> wrote in
message
news:g6n78v$qmn$[email protected]..
> Like the title says, I'm working on a centered layout
and I need to place
> a div
> tag that has an overflow for scrolling. The problem is
what do I do so
> that it
> does just that. I tried using an AP div tag but it
doesn't follow the rest
> of
> the layout if you play with the browser width. And if I
simply put a div
> tag in
> my table, I don't know how to put an overflow on it. I
only have a limited
> amount of space for the text, and I have too much text
to simply put it in
> the
> table. It's my first time working on a centered layout,
so I'm kind of at
> a
> lost right now. And that's the only thing stopping me
from putting it
> online.
>

I have model A1458...been acting possessed.... apps opening and closing on their own...zooming in and out... not always responsive to my touch... what could be the problem?

i have model A1458...been acting possessed.... apps opening and closing on their own...zooming in and out... not always responsive to my touch... what could be the problem?

The two most likely culprits would be a faulty cable/charging block or a bad digitizer. Try charging the device with a different charger and cable. If the problem goes away, then the problem is with your charger. If it does not, try the basics of resetting, restoriing from back up, restoring as new. If you still have the problem, make an appointment at the Genius Bar at your local Apple Store for evaluation.

Spry problems in IE, menus stuttering when opening and closing

I just intserted some spry collapsible panels into a dreamweaver page I am developing but when I preview the pages in IE8
the spry menus stutter and shake when opening and closing.
Does anyone have any idea what is causing this?

alexk2077 wrote:
I just intserted some spry collapsible panels into a dreamweaver page I am developing but when I preview the pages in IE8
the spry menus stutter and shake when opening and closing.
Does anyone have any idea what is causing this?
That is strange, I just did the same without any problem.
I did use the original Spry files (JS and CSS).
How about you, are you using the original files or are you using your own modified files?
Ben

The iPad does not ship unless he closed ITunes does not recognize or computer If he shipped fully closed device I bought a charger and bought Link and the same problem persists IPad without Jelbrak

The iPad does not ship unless he closed
ITunes does not recognize or computer
If he shipped fully closed device
I bought a charger and bought Link and the same problem persists
IPad without Jelbrak

What do you mean 'does not ship unless he closed' ? What are you trying to do with your iPad, and what happens when you do it ?
If your computer's iTunes isn't recognising the iPad then do you have the latest version of iTunes installed on your computer ?
device not showing in iTunes on a PC : http://support.apple.com/kb/TS1538
on a Mac : http://support.apple.com/kb/TS1591

TS3899 I just installed the latest software update on my iPhone this weekend (9/22/12), and now I can't get email. I've restarted and closed all my apps to no avail. I'm able to get email on my laptop, so it's not a problem with my provider. Any ideas?

I just installed the latest software update on my iPhone this weekend (9/22/12), and now I can't get email. I've restarted and closed all my apps to no avail. I'm able to get email on my laptop, so it's not a problem with my provider. Any ideas?

Originally we were getting the error that the phone could not connect. Then, after deleting the account multiple times and re-adding it again, the error message CHANGED to having to log in to Yahoo and authorize.
When we went to Yahoo in a regular browser and logged in there was an alert telling us about connection attempts so it disabled mobile/iphone connectivity. It required that we change our password FIRST.
Then, we went in to Manage Apps and Webpages and saw that iPhone was not there but Facebook was.
After all of this went back to the phone and deleted then re-added the account again and SUCCESS!
It now also shows up on the Yahoo Manage Apps and Webpages.
Hope this helps someone else. Please consider giving me points if it does or like the post.
Fred

IBooks 1.3 video tag problem! Can any developer help me ?

Probem with epub files. iBooks 1.3 video tag problem! Can any developer help me ?

I solved a similar issue, by removing the oracle.xml shared library when deploying the application ...

MacBook Pro is operating more and more slowly in opening and closing, opening and closing programs and accessing and closing from mobile broadband. Is there a solution to this problem?

MacBook Pro is operating more and more slowly in opening and closing, opening and closing programs and accessing and closing from mobile broadband. Is there a solution to this problem?

Did you try rebooting?

7344 servo motion switching between open and closed loop operation

I have a custom end-of-line test system presently using a 4-axis 7344 servo controller to perform various functional tests on small, brushed DC motors. The system is programmed in C/C++ and uses flex motion functions to control the motor during testing. Motors are coupled to external encoder feedback and third party PWM drives running in closed-loop torque mode from an analog command signal. The system uses all four motion axis channels on the 7344 board to independently and asynchronously test up to four production motors at a time.
In closed-loop mode, the system runs without issue, satisfying the battery of testing protocols executed by this system. I now have a request to add additional test functionality to the system. This testing must be run in open loop mode. Specifically, I need to use my +/- 10v analog output command to my torque drive to send different DAC output levels to the connected motor.drive while monitoring response.
I do not believe the flex motion library or 7344 controller includes functions to easily switch between open and closed loop mode without sending a new drive configuration. I am also under the impression that I cannot reconfigure one (or more) servo controller axis channels without disabling the entire drive. As my system runs each axis channel in an asynchronous manner, any requirement to shutdown all drives each time I change modes is an unworkable solution.
I am open to all ideas that will allow asynchronous operation of my 4 motor testing stations. If the only solution is to add a second 7344 controller and mechanical relays to switch the drive and motor wiring between two separately configured servo channels, so be it. I just want to explore any available avenue before I place a price tag on this new system requirement.
Bob

Jochen,
Thank you for the quick response. The 7344 board does an excellent job running my manufacturing motor assemblies through a custom end-of-line tester in closed loop mode. A portion of the performance history and test result couples the motor through a mechanical load and external shaft. The shaft is in contact with a linear encoder that closes my servo loop.
My new manufacturing requirement is to also sample/document how the small DC motor behaves in open loop operation. Your solution is exactly what I need to perform the additional functional tests on the product I am manufacturing. I see no reason why this cannot work. I was originally concerned that I would need to reinitialize the 7344 board after changing axis configuration. Initialization is a global event and impacts all four channels on the 7344 board.
Using flex_config_axis() to change axis configuration on a single channel without disturbing other potentially running axis channels will solve my concern. It will be several weeks before I can return to the manufacturing facility where the 7344-based testing machine is located. I will update this thread once I verify a successful result.
Bob

Opening and Closing Stock Monthwise

hi,
I need to display month wise Stock details like below
month-year Opening-Stock STock-In Stock-Out closing-Stock
I have made the query, but this query gives only monthwise stock-in and stock-out. How do i get Opening-Stock and closing-Stock.
SELECT e.STORE, months.month,
SUM( (CASE WHEN trunc(e.MAT_IN_DATE,'MM') = months.month THEN MVALUE ELSE 0 END) )
Mat_Rcvd,
SUM( (CASE WHEN trunc(E.MAT_OUT_DATE,'MM') = months.month THEN MVALUE ELSE 0 END) ) Mat_Out
FROM
SELECT STORE,ITEM_CODE, SUM(NVL(MQTY,0)) M_QTY, SUM(NVL(MVALUE,0)) MVALUE,
MAT_OUT_DATE, MAT_IN_DATE
FROM
SELECT GD.TO_STORE STORE , GD.ITEM_CODE,
GD.QUANTITY MQTY, GD.AED_RATE * GD.QUANTITY MVALUE, NULL MAT_OUT_DATE , GRN_DATE MAT_IN_DATE
FROM GRN_DETAILS GD , GRN_MASTER GM
WHERE GD.GRN_NO = GM.GRN_NO
UNION ALL
SELECT MI.STORE, MI.ITEM_CODE, (NVL(MI.QUANTITY,0)) MQTY,
MI.QUANTITY * UNIT_RATE MVALUE , mi.ISSUE_DATE MAT_OUT_DATE , NULL MAT_IN_DATE
FROM MATERIAL_ISSUE MI , MINR_MASTER MM
WHERE MI.MIN_NO = MM.MIN_NO
WHERE STORE='ABC'
GROUP BY STORE, ITEM_CODE, MAT_OUT_DATE, MAT_IN_DATE
) E ,
(SELECT add_months( date '2007-07-01', level ) month,
     FROM dual
WHERE add_months( date '2007-07-01', level ) < SYSDATE
CONNECT BY level <= 30 )months
GROUP BY e.STORE, months.month
ORDER BY MONTH
/

Please consider the following when you post a question. This would help us help you better
1. New features keep coming in every oracle version so please provide Your Oracle DB Version to get the best possible answer.
You can use the following query and do a copy past of the output.
select * from v$version 2. This forum has a very good Search Feature. Please use that before posting your question. Because for most of the questions
that are asked the answer is already there.
3. We dont know your DB structure or How your Data is. So you need to let us know. The best way would be to give some sample data like this.
I have the following table called sales
with sales
as
      select 1 sales_id, 1 prod_id, 1001 inv_num, 120 qty from dual
      union all
      select 2 sales_id, 1 prod_id, 1002 inv_num, 25 qty from dual
select *
from sales 4. Rather than telling what you want in words its more easier when you give your expected output.
For example in the above sales table, I want to know the total quantity and number of invoice for each product.
The output should look like this
Prod_id   sum_qty   count_inv
1         145       2 5. When ever you get an error message post the entire error message. With the Error Number, The message and the Line number.
6. Next thing is a very important thing to remember. Please post only well formatted code. Unformatted code is very hard to read.
Your code format gets lost when you post it in the Oracle Forum. So in order to preserve it you need to
use the {noformat}{noformat} tags.
The usage of the tag is like this.
<place your code here>\
7. If you are posting a *Performance Related Question*. Please read
   {thread:id=501834} and {thread:id=863295}.
   Following those guide will be very helpful.
8. Please keep in mind that this is a public forum. Here No question is URGENT.
   So use of words like *URGENT* or *ASAP* (As Soon As Possible) are considered to be rude.

Tag insight and closing tags problem

Similar Messages

Maybe you are looking for