Taget disk mode with lid closed?

I'd like to connect my uni-body MBP to my Mac Pro. Is it OK to go into Target Disc Mode, connect a firewire cable and closed the lid? I'd like to be able to place the MBP in my BookArc while I transfer/sync data this way. I'll have the power adapter connected to the MBP during use.
Thoughts?

If it works for you, the only downside I can think of is that the MBP can't cool itself as effectively when closed as it can when open. In what Apple calls "clamshell mode", with the display closed, the AC adapter and an external monitor, keyboard and mouse connected, the computer is fully operational except that its built-in display is turned off. In FW Target Disk Mode, the computer is much less fully operational, but its display is on (even though all it's showing is the bouncing FW logo). And Apple doesn't say anything anywhere, as far as I know, about closing the display in that mode, so it's not clear whether Apple considers it an acceptable, unacceptable or neutral thing to do.
Therefore, I would suggest doing it only when you're going to be on hand to check the MBP's external temperatures while large file transfers are taking place. If the case ever feels uncomfortably hot, open the display just to be safe. And if you ever do find it necessary to open it up under those circumstances, be doubly careful in the future about using the machine closed in FWTDM when the ambient air in your workspace is unusually warm, because that further impairs efficient cooling.

Similar Messages

Network Disk Disconnects With Lid Closed

USB disk connected to Airport Extreme is lost when I close the lid of my PowerBook G4. I am using BT keyboard and mouse and external display.
Message was edited by: George Carty
Message was edited by: George Carty
Message was edited by: George Carty
Message was edited by: George Carty

Even if you have the computer configured to run with its lid closed, closing the lid shuts off its network connections until it is woken up again unless software such as SleepLess is used.
(29490)

Audio & video via HDMI to an external monitor with lid closed.

I would like to run a Macbook Pro Retina (2014) with the lid closed and all video and audio via HDMI routed to an external monitor (Samsung Syncmaster from 2010). Is this possible? When I try this, no sound is transferred to the external monitor and I cannot operate the Macbook Pro with the lid closed. As soon as I close the lid, it cuts the signal to the external screen.
I’ve tried looking for previous posts but they’re about MCP’s connecting via Thunderbolt or DVI. Any ideas?

Seems like there may be two separate questions here. Audio working in either configuration and video from HDMI when lid closed. First, you are doing this with the Mac running off of AC, not battery, right?
Audio:
Is the HCMI cable you are using able to carry the audio? Some cables don't.
The only way I've ever used external displays with lid closed is with the thunder port (or DVI) adapter, not with the HDMI. I see the specs from Apple:
HDMI video output
Support for 1080p resolution at up to 60Hz
Support for 3840-by-2160 resolution at 30Hz
Support for 4096-by-2160 resolution at 24Hz
So have you tried varying the screen res to determine the results? I can find no specs regarding what ports remain operational in clamshell. Like you, I would have assumed all of them.
I suspect only the thunderbolt port would support your desired config -- try a thunderbolt/hdmi adapter.
Finally, clamshell mode doesn't allow the MBP to cool efficiently. Heat kills electronics, so if it's too warm or the fans really kick in, you might want to reconsider this setup.

Is there anyway to have an 11 inch mac air connected to an external monitor with lid closed and still be able to see content. I have a wireless ketboard and mouse and have tried everything. Only works when plugged in.

Is there anyway to have an 11 inch mac air connected to an external monitor with lid closed and still be able to see content. I have a wireless ketboard and mouse and have tried everything. Only works when plugged in.

You are referring to a feature called Clamshell Mode, please read Clamshell Mode setup for instructions.
BTW when posting when you use generalities such as "have tried everything" this tells us nothing. When posting please be specific and try to paint a complete picture. It just makes things easier for those trying to help you.

Macbook sleep wake up with lid closed

Hi everybody. Since 10.9 I had a strange issue with sleep on my MBP 15. If I put it in sleep with the button and I close the lid, it will wake up closed waiting for the password.
Also, if it is in sleep while charging, or charged, and I plug off the magsafe, it will wake up again....even with lid closed.
Already resetted PRAM, SMC, all the basics, any idea?
Thnx in advance

Sleep - Why your Mac might not sleep or stay in sleep mode
Sleep - Won’t

Odd behavior: empty optical drive makes eject sound with lid closed

Anyone heard of this? I've got a black MacBook (2.0Ghz) w/ Leopard. Laptop is plugged into outlet with lid closed & no disk in the optical drive. Every 2 minutes or so I can hear the eject sound like when you push the eject button.
Any clues or suggestions?

I have had this problem for a couple of months. I took it into to be looked at by someone at the Apple store and they couldn't replicate the problem. It happens continuously now and drives me crazy. I took a video of it and posted it on youtube. Take a look and tell me if this is what you are experiencing, or if you have any ideas on what is happening or how to stop it. I plan on taking it to the Apple store this weekend if it is still doing this (which I am sure it is)
http://www.youtube.com/watch?v=4at0val7TKo
Thanks,
Tim

How to keep the MB powered on with Lid closed

How to keep the MB powered on with Lid closed and no monitor connected?

You can't. And you shouldn't due to heating issues.
There are however 'hacks' that allow you to bypass
this.
http://www.alxsoft.com/mac/sleepless.html
http://semaja2.net/insomniaxinfo/
Blackbook C2D Mac OS X
(10.4.10) 120Gig, 1Gig, Superdrive.
This may be true of overheating, but ONLY in the iBooks and very old laptops, if you think about it what is the difference between native clamshell mode (Using the monitor/keyboard etc) and the hacked clamshell mode? does plugging a screen in to the laptop some how create more ventilation :S
This rumor is really really wrong, and as stated only affected the old machines which were not capable of native clamshell mode, but of course we keep the warnings there because we dont want to be sued if some idiot places it in there laptop bag while rendering a movie.
PS. If anyone can give me evidence to prove otherwise i will add it to the investigation that im slowly compiling to "bust" this annoying myth

MBP and target disk mode with PPC desktop

I am thinking about finally jumping to a MBP from a PowerBook.
One of the things I do a lot is hook up my PowerBook in target disk mode to interchange information with my PowerPC desktop.
Any problems with using a MBP in target disk mode with a PPC desktop? If so... what???
Thanks for any feedback, help, cautions.
-- Jim
Powerbook 15 1.67ghz High Res DDR2 Mac OS X (10.4.6) 1.5gb ram, 80gb

We just took the plunge and our MBP is being shipped.
Did you let the Migration Assistant move your applications? I am thinking about whether it is a good idea to migrate Final Cut Studio and any other non-Universal apps, for example, from the PowerBook, then get the Universal upgrades? Or just get the Universal versions and install them?
thanks

Can you install tiger on a power mac g4 with out a DVD drive if so how, I do have have a 2011 iMac can I use that in target disk mode with a FireWire cable any help would be appreciated

Can you install tiger on a power mac g4 with out a DVD drive if so how, I do have have a 2011 iMac can I use that in target disk mode with a FireWire cable any help would be appreciated

Hello,
You need to put the Tiger Install Disc in the 2011 iMac, boot the 2011 uMac into Target mode...
http://support.apple.com/kb/HT1661
Boot the G4 holding the Option or alt key, hopefully the Install Disc in the 2011 iMac will show as a boot choice.
We just want to use the 2011 iMac as a big expensive FW Optical drive, it cannot be installed osing the 2011 iMac itself.

MBP Randomly Wakes Up With Lid Closed

Hi,
My Macbook Pro (OS 10.4.11) always randomly wakes up by itself after I closed the display lid. Is there anything I can do to remedy this? Thanks.

I get this too and it is really really annoying. Then, when I open the lid to try to put it to sleep again, it goes to sleep, so now it's doing the opposite: asleep with lid open and awake with lid closed. The real problem is that I can't wake it up! The other annoying thing is that with the lid closed some of my bluetooth devices i.e. wireless keyboard and mouse wake it up. Solutions?

Play CD music with lid closed

Is it possible to play CD with lid closed without a external display plugged in? Assuming the MBP is connected to AC outlet, and Bluetooth mouse is present.

No. You need an external display, mouse, and keyboard connected.
And why would you wanna do that? Are you running a line out? If not and you are playing the sound out through the MBP speakers, the lid would make minimize the output of the speakers and it would sound like garbage.

Can iTunes play with lid closed?

I am a newbie, so please excuse me if this sounds like a dumb question. I just moved from Windows world (after using it for 25 years) to MacBook Pro about 4 months ago.
I am using AiportExpress to stream music from iTunes to 3 different audio system throught my home. I would like play iTunes to play the music even when my MacBook lid is closed. I can't seem to get this work. Seems like such a basic function. Is it possible to play iTunes with lid closed? What am I missing?

{quote:title=Chris CA wrote:}If Apple were to allow it with a setting and the user burned up the computer, then it would have to be covered under warranty, which it isn't.{quote}
Don't mean to argue.. but I still believe that it should be a user enabled/disabled function. I've used it on all my PCs for several years (when playing CD on Windows Media Player) and I am yet to BURN a single device
If I have to keep the MacBook open to keep running iTunes, wouldn't I run the same risk of BURNING (like you said)?
OK.. this is what I need to do...
I have all my music in iTunes. I have setup 3 AirportExpress (AirTunes) hooked up to receivers on 3 levels on my home. I'd like to play the music from iTunes (wirelessly streaming throughout the house via AirTunes) without having to keep the MacBook open. How do I do it?
I don't want to see any third party apps (e.g. Insomnia) to prevent my computer from going to sleep. I just want to accomplish what I described above. Can this be done or not?
Another question is if the iTunes is running on one of my Windows-based laptops, and I close the lid on that, iTunes (on PC) should continue to run. Right?
Any help is greatly appreciated.

Any way I can play music on 15" rMBP with lid closed?

Hi everyone,
I'm enquiring if I can play music on my 15" retina Macbook Pro while it is asleep. I have an iPhone 5 I can listen to music on, but I've recently found that the sound is so much better if I plug my headphones into my Mac as it gives a fuller richer sound.

Welcome to the Apple Support Communities
You have to use an app which disables sleep when you close the lid. For this, use InsomniaX > http://www.macupdate.com/app/mac/22211/insomniax After disabling sleep with lid closed, you should be able to listen to music. Be careful doing this because your computer may get overheated if you keep the Mac with lid closed and turned on for a very long time

Thunderbolt display problems using MBP with lid closed

I am experiencing a very reproducible problem since purchasing aThunderbolt display to use with a recent (1 month old) Macbook Pro 13"2.7GHz i7.
I use my MBP with lid closed with myThunderbolt display. If Ithen allow the MBP to sleep and power down, on restarting it the WiFi hasstopped working- the menu bar says I am connected by WiFi but Safari will notconnect to the internet and Time Machine cannot connect to the Airport/TimeCapsule to backup. Nothing I do will fix it (shutting down all programs, turingWiFi off then on) and so I have to shutdown/reboot BUT THEN the MBP freezesduring shutdown (waiting 15, 20, 30 minutes!) and I have to hold down the powerbutton (hard reboot). Once I reboot everything works fine UNTIL I take a breakand the computer goes to sleep again.
Doesn't seem to be a problem with the MBP lid open, but I needto test this a bit more to be sure...
On top of this the Bluetooth trackpad now keeps going on andoff; connected, not connected despite being near or the computer. Veryirritating at best, unusable at worst. This only started to be a major problem(every 10-15 minutes or so) when I started to use the Thunderbolt display.
These problems seems to be in some ways similar to anotherthread:
https://discussions.apple.com/message/16205098#16205098
("Major problemswith Thunderbolt display & MBAir")
I have applied the recent Thunderbolt Firmware update, and SMC& PRAM/NVRAM resets. Interestingly these seemed to work initially but thenafter a prolonged power-down period the problem has recurred. Back to square 1.
Any ideas out there?

Just to be clear, have you installed everything that you find on this page?
http://support.apple.com/kb/HT4644
I just talked to Apple Care about Thunderbolt issues in general and even though I already had the Thunderbolt Software Update installed, he had me reinstall it. If you go to this page:
https://discussions.apple.com/message/16889000#16889000
you can read in detail about the issues I was having which have for the most part been remedied (for now at least!)
The Thunderbolt cable definitely transfers heat for some reason even when there isn't a high CPU utilization. The process 'kernel_task' seems to be where the API for thunderbolt is running. But for some reason, the behavior of CPU Utilization to Fan Speed is amplified when connected to the TBD.
Apple Care is researching it.

My ipod nano 6th gen screen is white ive tried the hard disk mode with the power and volume buttons and it still wont work any suggestions?

my ipod nano 6th gen screen is white ive tried the hard disk mode with the power and volume buttons and it still wont work any suggestions?

You can try Restoring it in iTunes but I believe you will end up needing to have it serviced.

Taget disk mode with lid closed?

Similar Messages

Maybe you are looking for