Tagging a DTP to Transport Request
Hi,
Do we need to tag DTP to a transport Request? Will Treq fail if we dont tag the DTP?
Kindly advice.
Thank Tou,
Poornima.
Hello,
I understand that you want to transport the DTP,
If yes then you need to Tag/Capture it in a request,
Other wise it will not go to the next system.
If you only have a DTP that you need to transport..the request will notfail
But suppose you have a request of process chains in which this DTP is used ; that request /or processchain can have a problem later.
Please let me know what you want to achive here in detail
waiting for your feedback
Regards
Nitin Bhatia
Similar Messages
-
Problem in tagging the object to Transport Request
Hello Experts,
I have installed 0FISCVARNT using BI Content, but when i try to change the package of the standard object and save it under TR, it is not allowing me to change the package from local class.
Please provide me any suggestions, if you have any.
Thanks
PTHi PT,
What are all the steps you have tried I am not aware of, but you can try following options.
1) Goto SE03 transaction, on the left hand side tree you have the option "Change object directory entry". Select that option put eh object type as R3TR IOBJ and your info object name. Just execute and you should be able to change the package from local to any other transportable package.
2) Go to RSD1 and give info object name, goto change option and I am not remembering in the EDIT or menu beside EDIT you will have the option to change the "Object Directory Entry", there also you can change package from local to transportable package.
Regards,
Durgesh. -
Asking for Transport Request while editing DTP in Quality - Client Open
Hi Guru's,
We have opened the client and trying to edit the DTP, but it is asking for transport request.
Is there any other setting that we need to do in order not to prompt for transport request?
Thanks & Regards.Hi Ganesh,
One of the options would be to save it in a DUMMY request ,incase you do not want to transport such that you make changes next time it will by default get saved in that DUMMY request i.e it will not ask for a request next time.
We usually save it in Dummy request,when we change a DTP in Quality or in Production.
Rgds
SVU123 -
Error while importting Transport Request
Hi,
I am getting following errors while Transporting requests from Development to Test System
Error getting fields for PSA /BIC/B0000643
Error occurred during post-handling RS_AFTER_IMPORT ofr DTPA L
The Transport request just contains one Transformation the corresponding DTP.
We are using BI 7 for Bank Analyzer and have just imported SP11. This problem has started coming only after the import of SP11.Hi Pom,
Yes the DS were active. I tried to re-transport that too but the TR failed with similar error.
Finally I tried to manually activate the DTP in the Target system and got the same error. I rectified the problem by deleting the DTP from the Target system. But I am not sure why this happened. Please let me know if you have any idea abt the same.
Thanks
Pooja -
Error in FM DDIF_NAMETAB_GET when deleting BI objects via transport request
Dear all,
when importing a transport request in which several types of BI objects are deleted (Infocubes, DSO's, transformations, routines, DTP's, query elements, infosets, process chains). The import terminates only when transporting from acceptance to production with return code 12 due to an uncaught exception:
Transporting from development to acceptance did not raise this exception.
The ST22 dump (see below) refers in the "contents of system fields" section to a DSO, and to post-import activities. The DSO and the associated tables could not be found (rsa1 & se16), since they are deleted as desired.
Some of the relevant notes that I have found do refer to DSO related problems, but they all indicate to install SP19 which we already have installed (BW 7.0 Patch Level 23)
Could you please assist in pointing out potential solutions based on the information from the ST22 Runtime Error below?
Kind regards,
PJ
Runtime Errors UNCAUGHT_EXCEPTION
Except. CX_RS_PROGRAM_ERROR
Date and Time 08.02.2011 10:48:14
Short text
An exception occurred that was not caught.
What happened?
The exception 'CX_RS_PROGRAM_ERROR' was raised, but it was not caught anywhere
along the call hierarchy.
Since exceptions represent error situations and this error was not
adequately responded to, the running ABAP program
'CL_RSDD_DS====================CP' has to be
terminated.
Error analysis
An exception occurred which is explained in detail below.
The exception, which is assigned to class 'CX_RS_PROGRAM_ERROR', was not caught
and therefore caused a runtime error.
The reason for the exception is:
Error in BW: Error in DDIF_NAMETAB_GET
How to correct the error
If the error occurs in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the following
keywords:
"UNCAUGHT_EXCEPTION" "CX_RS_PROGRAM_ERROR"
"CL_RSDD_DS====================CP" or "CL_RSDD_DS====================CM001"
"APPEND_DS_TEC_FIELDS"
System environment
SAP-Release 700
Application server... "dp1ci"
Network address...... "<removed>"
Operating system..... "HP-UX"
Release.............. "B.11.23";
Hardware type........ "ia64"
Character length.... 16 Bits
Pointer length....... 64 Bits
Work process number.. 45
Shortdump setting.... "full"
Database server... "spisap02"
Database type..... "ORACLE"
Database name..... "DP1"
Database user ID.. "SAPBIW"
Terminal................. " "
Char.set.... "C"
SAP kernel....... 700
created (date)... "Dec 14 2009 20:47:35"
create on........ "HP-UX B.11.23 U ia64"
Database version. "OCI_102 (10.2.0.1.0) "
Patch level. 236
Patch text.. " "
Database............. "ORACLE 10.1.0.*.*, ORACLE 10.2.0.*.*, ORACLE 11.2.*.*.*"
SAP database version. 700
Operating system..... "HP-UX B.11";
Memory consumption
Roll.... 5979936
EM...... 0
Heap.... 1459888
Page.... 40960
MM Used. 6988880
MM Free. 415648
User and Transaction
Client.............. 000
User................ "DDIC"
Language key........ "E"
Transaction......... " "
Transactions ID..... "4D5111661004210BE10000000AFA2502"
Program............. "CL_RSDD_DS====================CP"
Screen.............. "SAPMSSY0 1000"
Screen line......... 6
Information on where terminated
Termination occurred in the ABAP program "CL_RSDD_DS====================CP" -
in "APPEND_DS_TEC_FIELDS".
The main program was "RDDEXECU ".
In the source code you have the termination point in line 61
of the (Include) program "CL_RSDD_DS====================CM001".
The program "CL_RSDD_DS====================CP" was started as a background job.
Job Name....... "RDDEXECL"
Job Initiator.. "DDIC"
Job Number..... 10475900
Source Code Extract
Line SourceCde
31 RAISE EXCEPTION TYPE cx_rs_program_error
32 EXPORTING
33 text = 'Invalid DSO subtype'. "#EC NOTEXT
34 ENDCASE.
35
36 * get table name from DDIC
37 CALL METHOD cl_rsd_odso=>get_tablnm
38 EXPORTING
39 i_odsobject = n_infoprov
40 i_tabt = l_tab
41 IMPORTING
42 e_tablnm = l_tablnm
43 EXCEPTIONS
44 OTHERS = 1.
45
46 IF sy-subrc <> 0.
47 RAISE EXCEPTION TYPE cx_rs_program_error
48 EXPORTING
49 text = 'Error in CL_RSD_ODSO=>get_Tablnm'. "#EC NOTEXT
50 ENDIF.
51
52 CALL FUNCTION 'DDIF_NAMETAB_GET'
53 EXPORTING
54 tabname = l_tablnm
55 TABLES
56 dfies_tab = l_t_comp
57 EXCEPTIONS
58 not_found = 1
59 OTHERS = 2.
60 IF sy-subrc <> 0.
>>>>> RAISE EXCEPTION TYPE cx_rs_program_error
62 EXPORTING
63 text = 'Error in DDIF_NAMETAB_GET'. "#EC NOTEXT
64 ENDIF.
65
66
67 ELSE.
68 * model table only needed for standard datastore objects, for
69 * write optimized DSOs target table is a changelog that is fully described by
70 * dta_pro (infoobjects)
71 CHECK n_s_dta-odsotype = rsdod_c_type-standard.
72
73 * get model table fields to add
74 CALL METHOD cl_rsd_odso=>get_mod_tab
75 IMPORTING
76 e_mod_fld_ur = l_t_comp.
77 ENDIF.
78
79 * according to T.B. ( 13.04.2007) the correct position is
80 * not needed in the D version
Contents of system fields
Name Val.
SY-SUBRC 0
SY-INDEX 0
SY-TABIX 1
SY-DBCNT 1
SY-FDPOS 0
SY-LSIND 0
SY-PAGNO 0
SY-LINNO 1
SY-COLNO 1
SY-PFKEY
SY-UCOMM
SY-TITLE Execute Post-Import Methods and XPRAs for Transport Request
SY-MSGTY E
SY-MSGID DA
SY-MSGNO 300
SY-MSGV1 /BIC/AV_AMOFCB40
SY-MSGV2
SY-MSGV3
SY-MSGV4
SY-MODNO 0
SY-DATUM 20110208
SY-UZEIT 104759
SY-XPROG SAPLSYST
SY-XFORM SYSTEM_HOOK_OPEN_DATASETHi All
We are also experiencing this same error when transporting deletions of multiple objects.
Although the transport was cancelled in the destination system (production) it appears to have largely deleted all objects successfully except for DSOs.
The DSOs still appear in the table RSDODSO (via SE11) but are not visible anywhere else. When you try to view the DSO via RSDODS a warning appears saying "DataStore object to be deleted by transport -> delete only allowed". If you try to delete them in this transaction the same ABAP runtime error as the transport appears.
Any assistance would be greatly appreciated!
Regards
David -
Can't able to release transport request which has process chain information
Hi Experts,
Can any one come accross the similar issue? . If so I am eager to know the fix for it.
I have collected my process chain in a transport request and when I am trying to release the same for import to another system, I get the following error message.
Error Message: some object (start varient for process chain and DTP process) is missing in the transport request.
BUT THE MENTIONED OBJECT IS COLLECTED AND I CAN SEE UNDER MY REQUEST.
But still i get the error message. Not sure where the problem is.
Hope there might be some solution to resolve the issue.
Thanks and Regards,
Saravanan.Hi All,
I have tried all the options which you all suggested, but still i face the same issue.
I tried collecting it through transport connection through RSA1.
Right click on request/task.
Please let me know any other solution to resolve.
Are there any check will be happened at database or somewhere else when collecting the transport?
Thanks and Regards,
Saravanan. -
Transport request deleted from buffer how to retain it?
Hi geeks please help me.
As the support package upload,i have found that some transport request request are blocking the support package upload.The error issued was Queue_not_empty .I went to command prompt to get the list of transport request with status "will not be import because it is tagged".
then to remove them from the buffer I executed commands
tp addtobuffer <tr.request> <SID> pf=<path of tp profile> U1 tag=SPAM
tp delfrombuffer <tr.request> <SID> pf=<path of tp profile> tag=SPAM
.But now I see the transport request in the queue is in "RED" status.
I need to retain the transport request and reimport it.Is there any way to do that?
I have both K-file and R-file corresponding to this requests in cofile and data directories respectively.
Regards
SyamkrishnanHi Syamkrishnan,
just copy the cofile and data file in the transport directory, then go to STMS click on Extras -> Other requests -> Add and add the transport to the queue.. then just reimport.
Hope this help
Juan
Please reward with points if helpful -
Missed get delta once option in dtp and transported to prod
hi all
we have transported DTP for our infocube 0wbs_c11 into production.
This infocube 0wbs_c11 is loaded from 4 datasources of which one datasource supports delta and rest donot.
so in process chains we are using the option for delete overlapping requests. for all the 3 datasources which doesnot support delta.
But for one of these 3 datasources we have transported DTP without ticking GET DELTA ONCE OPTION AND loaded to infocube.
now we should tick the get delta once option and transport it to production, where we already ran this dtp once.
Since we cannot enable the get delta once option enabled in dtp after the first dtp run
my question is should i delete the request from infocube and transport the dtp transport request (to prod )with getdelta once option ticked and run the dtp again will it work.
or do i need to delete the request as well as dtp from prod and then transport the new request with delta once option ticked.
regards
krishnabased on the above link which says after activating transformations using the program rsdg_trfn_activate if we run process chain the dtp's get activated by itself
i have done a trial based on the above point
i went to dtp execute tab and press execute ,and when it asks me for furthur process
YES NO CANCEL
I have cancelled the execution of dtp.
and now when i refresh the tree the dtp is seen active .
i followe the same for all.
regards
Edited by: krishnav3.5 on Sep 16, 2011 4:17 PM -
Collecting objects in transport request
HI Experts,
My development is completed and now i have to collect the objects in transport request. my development is like
1) infoobjects(new infoobjects and some are available in BIP already and some infoobjects have reference infoobjects, dependent object is in production)
2)Infopackeage for Datasource
3)DSO
4) Infocube
5)multiprovider
6)queries and views
7)web templates
This is the first time I am collecting this many objects. So please give sugessions how to collect these objects in a single transport request.
Thanks and Regards,
RAJIt is advisable to collect the objects in separate transport requests...the transport request should contain dependent objects
1) collect all the InfoObjects
2) collect all the cubes/DSO (they need Infoobjects.. so they are dependent on 1)
3) collect datasources/Infosources (they need Infoobjects.. so they are dependent on 1)
4) collect transformation (they need 2 and 3)
5) collect DTPs and InfoPackages (they need 3, 4)
6) collect the reports
7) collect the web templates
make sure these are transported in sequence... each on dependent on previous -
How to create "package name" for transport request
Hi experts
I am trying to create transport request for infopackage/data source/dtp etc...
but system is asking package name in object directory entery.
Could you pl. share the information step by step, how to create the "package name"
Thanks in advance and you can get valuble points pl.
ChanduHi,
Go to transaction SE21 and give the package name as ZAPO or any thing starts with Z.
click on create button.
give a short description
in the Package properties block- allowed object types list box - select No restrictions.
in the transport attributes block- specify the transport layer
give software component as HOME
select the check box for changes recorded.
save the package.
or
Go to SE80
select package from the list box
give your package name and hit enter button
the popup asks you for input.
give the appropriate values and press create button.
Note: You should be registered as a developer in the system where you are creating the package.
Hope this solves your problem, Good luck
Srini -
Activated Objects in Transport Request
Hi Friends ,
Currenlty we have comepleted all our development in BD1 and collected all the objects in a transport request , But now my question is what is the best way to check all the activated objects are included in the transports to be released to BQ system ?
Any inputs greatly accepted,there is no easy way to check if all the needed objects for a whole project are captured in a request or not. As the objects may be scattered across the infoareas, the only fool proof way to be sure, is to manually check all the objects - if it is included in the request or not. or the check in the transport connection to see if you are missing any of the dependent objects (perhaps the easiest)have a check list of objects and make sure of the dependencies so that they can transported in order.
sequence should be:
DS, IO, App components, IO catalogs
cube and ODS
transformations
DTP and infopacks
multi providers
queries
PChains
Message was edited by:
voodi -
Transport Request for infopackage
Hello Experts,
I am facing a problem in creating infopackage.
Everytime I create infopackage, it asks for transport request in development system. Though I dont want transport request to get generated for infopackages.
What setting I have to do for the same?
Regards,
Nirav ShahHi All,
Dev system : system setting usually be modifiable and thats y it would ask for a request.
Qual and Prod : System settings will be non-modifiable and thru RSA1>transport connection>Eveything changeable is done for InfoPackage,DTP, PC...
You cant have a scenario with system modifiable and restrict the objects as everything changeable.
Hope i'm clear
Cheers,
Shaw -
Transport request in quality server
Hi everyone..never mind if this is not the correct place to post this question..i have the access to ECC QUALITY SERVER..i tried to generate the datasources in ECC Quality server..it has given PROMPT FOR LOCALWORKBENCH REQUEST pop-up window
when i look for the available requests through F4(input values)..there are no input values..
Dont we have the possibility to activate datasources in quality server?why so?and if anybody knows details about development,quality and production server could you please give me a broad explanation??im confused with these three types of servers and how they work!!
Thank you very much in advance for any help,
Edited by: yarpath on Sep 22, 2011 11:21 AMHi ,
Along with provided details Some info about server .
In SAP Landscape we have a server system called SAP architecture
DEV, QAS and PROD.
- DEV would have multiple clients.
190- Sandbox -Sandbox doesn't affect the other servers or clients its standalone system
100- Golden- dev and changes transferred to next level via transports it contains all configuration and master data .So all the configuration settings are done in golden clients and then moved to other clients. Hence this client acts as a master copy for all settings to be done so called "Golden Client"..
180- Unit Test- if configures then Transports from golden client will come here .
- QAS may again have mutiple clients
300- Integration Test
700 to 710 Training.
- PROD usually have one client
this depends on how is the client's business scenario.
Request flow like
DEVELOPMENT -> QUALITY -> PRODUCTION
DEVELOPMENT : where developer create new objects and flow or change existing one .
QUALITY : The objects moved from Dev tested as it has large amount of data and usually a copy of production so new development get tested with real time data and any bugs etc found can be fixed back in dev and get transported again .
PRODUCTION : Day to day business data is present here coming from different systems (R/3 ,flat file ,NON SAP system etc).
--In quality or producation you cannot see your transport request and it will not allow you to change object .
--Usually we have only access to create DTP ,Process chain ,Program etc in Production but we cannot change transfromation etc as the flow can not be disturbed .
--To see the status of your objects in any system which are moved via transport you need to see logs in Dev system .
--this will also tell you which systems are connected to your dev system .
Hopw this will be helpful .
Regards,
Jaya Tiwari -
Moving object from one transport request to another
Hi Gurus,
Am Having one query that i have been done some changes in the report and saved on one transport reuest number,but one function module which i have beeen used in the program saved in diffrent request and it contains some other objects,now i can i individually move the FM to other transport request number,Give me some ideas.Dinesh,
If the requests are not yet released then you can delete the object from the TR manually and then add it to the other TR manually or tag by doing a minor change.For ex
TR 1 Objects list
REPORT ZXYZ
TR 2 Objects list
REPORT ZABC
FM ZZASDEF
1.If both the TRs are not released then remove the FM from the TR 2 manually and add it manually in TR 1,provided you know how to add the objects manually.
or
2.If both the TRs are not released then remove the FM from the TR 2 manually.Go to the corresponding objects of the FM do a minor change,save,activate.Now it will ask for a TR,at this time choose OWN REQUEST and select TR1.
Thanks,
K.Kiran. -
How to change transport Request of an Object
Hi all,
I had assigned a transport request for an object (DTP) in transport organizer. Now i need to put this object in a different transport Request number. Is this possible? If so can someone suggest me how to do this?
Thanks
MaddyDelete the DTP.
Add the DTP to the new request - You can do this in SE03 or Transport Connection.
Or
Merge Requests using Context Menu on the Request.
Or
Open the DTP - Extras ( ? ) _ Object Direct Entry - Click on Change - Assign it to a new request. - You have to delete the DTP/Unlock it from the earlier request.
Maybe you are looking for
-
Exchange Powershell return value from Get-command to variable.
Hi I am trying to create a powershell-script for our monitoring-software. The script is supposed to establish a connection to our exchange-server mgmt-shell and execute this command: "Get-MailboxDatabaseCopyStatus" I have the connection in place, but
-
Error message: JPS-01538: The default policy provider was not found..winXP
Hi All, i am getting "Error message: JPS-01538: The default policy provider was not found" error when i am tryin to start Oracle Admin Server(11.1.1.3.0) after installing on Windows XP. Please see the below log and help me to solve this issue. ======
-
IdM doesn't support non-default port on mysql 4.1 as repository??
Hi IdM doesn't support non-default port on mysql 4.1 as repository?? IdM version is 6.0. I setup mysql 4.1 using non-default port 3307. (default port is 3306) During setup wizard, the URL [jdbc:mysql://localhost:3307/waveset] doesn't work. I am getti
-
BF3 Specact code not working.. or is it?
Hi, I have received two codes and saw other messages, so I understand what happens. My problem is when I redemmed and downloaded both dog tags and specact upgrade they did not show up in the game. My friend suggested downloading again, so I did for b
-
I cannot view pictures on pinterest or other websites. Load images Auto is enabled.
I cannot view images on sites like pinterest or photo sharing sites, the box comes up blank. I've deleted history, the "Load Images Automatically" is enabled. I only have this problem on foxfire. The images come up fine on Safari on my Mac. Please he