Tagging names when posting to facebook directly from picture

Does anyone know how to tag someone with the new iOS6 software when posting to facebook? I cannot seem to figure out how to put people's names on the tag but it does allow me to put the location.

I'm having exactly the same problem - just tried uploading to Facebook through iMovie and got no audio.
It works ok when I save to the camera roll and then upload the movie to Facebook from within the Facebook app.

Similar Messages

Is it possible to preserve the layer name when I copy and paste from Illustrator into Photoshop?

Is it possible to preserve the layer name when I copy and paste from Illustrator into Photoshop?
At the moment it just appears as "Vector Smart Object" in Photoshop and I have to take another step and change the layer name.
Thank you!

Not that I know. PS doesn't care for these kinds of things and uses its own naming system.
Mylenium

Suddenly my phone has stopped displaying my contacts names when I receive a message from them and just a number appears instead?

Suddenly my phone has stopped displaying my contacts names when I receive a message from them and just a number appears instead?

This happened to me and I was baffled for a bit. I went to my contact list and that contact (that was now a number) had disappeared. Then, multiple contacts started disappearing. Subsequently, they reappeared but in duplicate and sometimes triplicate. I believe that it had something to do with iCloud sync. I ended up removing the contacts (in settings) and then bringing them back in. Everything seemed to work after that.

My iPad mini, can only access camera roll photos. When posting on facebook. I can not access shared photos from my apple devices.

problem with iPad mini and iPhone 5c and Facebook app. I can only access camera roll, when posting photos, I can not see shared photos. Which I could before the previous 3 updates. I did speak to Apple support but they said Facebook was behind. i think over 6 months later I still have the same problem!

Thank you. Do you have any idea about the 5c, which is only 2 weeks old. Before this I had an iPhone 4, and you could choose which collection you wanted to post from,
but my 5c is also only showing camera roll, pehich is rather annoying to say the least!

XML Tag Name too long, won't run from a procedure

I have a select statement that creates an xml file using the xmlelement syntax. When I run the select statement on its own it runs fine and the xml file is generated with no errors. I'm building a procedure that does a bunch of stuff, with the end product being the generated xml file. Everything in the procedure works great, until I add the xmlelement select statement. When I try to compile it I get an error message that one of the identifiers is too long (it is 40 characters). Is there something special I need to do to get this to run within a procedure with the given tag names? I can't change the names as they are set by another department.
Thanks.

Sorry about that, Mondays are painful...
I'm not sure if you want the whole procedure, it is quite long, but here is the xml part. I am using TOAD, and when I right click and Compile I receive this error: PLS-00114: identifier 'PostalCodeOfPatientsCurrentResidenceKnownFlag FROM Admissions' too long
The part that confuses me is why does it run fine when I run it on it's own, I get the expected XML file, but when I try to run it from a procedure it fails.
SELECT sys_xmlgen(XMLELEMENT("MHR", XMLELEMENT("Control",      XMLELEMENT("DeliverySiteInstitutionNumber",a.institution_number),
                                                       XMLELEMENT("CreationTimestamp",sysdate),
                                                                           XMLELEMENT("DSSVersion",'NotSure'),
                                                                           XMLELEMENT("ResubmissionFlag",'1'),
                                                                           XMLELEMENT("SubmissionYear",a.REPORT_YR_AND_MNTH),
                                                                           XMLELEMENT("SubmissionPeriod",a.SUBMISSION_PERIOD)),
     XMLELEMENT("Stakeholders",XMLELEMENT("Stakeholder", XMLELEMENT("SubmissionType",'A'),
                                                                                                              XMLELEMENT("ULI", a.ULI),
                                                                                          XMLELEMENT("Gender",'Male/Female/Unknown'),
                                                                 XMLELEMENT("BirthDate", XMLATTRIBUTES(a.BIRTH_DATE_TYPE,a.BIRTH_DATE)),
                                                                                                              XMLELEMENT("ResidenceInformation",XMLELEMENT("ProvinceOfPatientsResidence",a.PROVINCE_OF_RESIDENCE),
                                                                                                                                  XMLELEMENT("PostalCodeOfPatientsCurrentResidenceKnownFlag",a.POSTALCODE_KNOWN_FLAG),
                                                                                                                                                      XMLELEMENT("PostalCodeOfPatientsCurrentResidence",a.POSTALCODE))
                    )).getClobVal() AS "result"
FROM Admissions a
Edited by: user11293056 on Jun 22, 2009 12:54 PM

Losing sustain when posting to Facebook

I've recorded a song using the grand piano on one track and the orchestra on another track. I used sustain for the piano chords. I saved and exited the app. In playback, the song is exactly as I played it. I posted it to Facebook and listened to it later. The piano chords lost their sustain, so the chords sound more "plunky.". I went back into the app and listened to the song again. the chords are still sustained, so I tried again to repost...same thing. They lose sustain when posting to FB. Any ideas?

Ther version of Premiere Elements 13 is the version on a MacBook Pro 2.8 GHz Intel Core i7; 16GB 1600 MHz DDR3, NVIDA GeForce GT 750M 2048 MB. OS X Yosemite version 10.10.2
When loading to Facebook the processing finishes - the progress meter gets to the end. The Error Message pops up at the end.
Vimeo and YouTube built in Premiere Elements feature work?
- I only tried YouTube but that did not work either.
What specific error messages are you getting with the Facebook failures?
- The error pop up message is above
BUT.... What did work was mentioned in this chain.
I exported the image to an MP4 video then saved it onto my HD. The imported the image to Facebook

Error when printing a PDF direct from SAP archive

Hi together,
I try to print a PDF direct from SAP archive and I got the error ""C:\Program files\Adobe\Acrobat 7.0\reader\AcroRd.exe" /p /h" not found. In the internet I found several topics which describe this way to print a PDF without open the Acrobat Reader.
The customizing for document management (Local application) seems o.k. If I remove in the registry the parameters /h /p for print, Acrobat Reader will open and show the document if I use the print button in SAP.
Have anybody an idea what the reason is?
Thank you.
Regards
Thomas

The rundll32 error seems to have disappeared. Until this morning I had both this error and the rundll32. All other types of docs open fine. This one will open if saved to the desktop first, but not from Outlook.

Poor quality when exporting HD project directly from Final cut Express

I am doing some HD projects in Final Cut Express HD. I filmed with the Sony HRD-HC1 in 1080i. I import into FCE using the 1080i 60 preset from Easy setup. I completed the project and it looks great from FCE full screen. I export as Quicktime (not Using Quicktime conversion), and I get a perfect looking output file using the Apple intermediate codec, 1440x1080. The problem is that the client needs to play back the video on windows machine using Quicktime. The windows Quicktime does not support the AIC apple intermediate codec, so I have to export to another format. I tried everything exporting from FCE, MP2, H.264, DivX, everyone option. They all look terrible. Blurry, especially parts that have quick motion. Really terrible. I called Apple support, no love. I then tried taking the AIC version of the file and used compressor. It took forever, but came up with am OK MP2 HD file. It still doesn't look that great, but it is way better. So, is their something broken with the FCE exports using Quicktime conversion? Anyone have similar experiences or workarounds? I don't want to use compressor as I don't have it on my Mac Book pro, I had to move it to another machine to do that.

Being that the dimentions you suggested should be widescreen, I re-ran the conversion to your parameters, this time un-checking "Preserve aspsect ratio.. as letterbox" and this time it is widescreen. Not sure why, but it was putting the black bars on the left and right, not the top and bottom, scrunching to 4:3ish with that box checked. Strange.
Anyway, the quality is the best H.264 I have seen exporting directly from FCE. It still blurs quite a bit on the fast moving video parts, my MP2 version from compressor still looks lots better. Seems like there is some problem with exporting HD from FCE. It just is not coming out sharp, like the Apple intermediate codec version you get with Export - -> Quicktime movie or if you wait for compressor to do the work rather than FCE. Does compressor use a different engine, or does it use the same QT and just take more time to do a better job in the export? Something just isn't right.

Video error when posting to Facebook

I am able to successful create a video with video/photo/music. When it comes to the Publish/Share my video - it errors in the process of sending to Facebook in SD or HD
I have repeated the Send request multiple times with no final success.

Ther version of Premiere Elements 13 is the version on a MacBook Pro 2.8 GHz Intel Core i7; 16GB 1600 MHz DDR3, NVIDA GeForce GT 750M 2048 MB. OS X Yosemite version 10.10.2
When loading to Facebook the processing finishes - the progress meter gets to the end. The Error Message pops up at the end.
Vimeo and YouTube built in Premiere Elements feature work?
- I only tried YouTube but that did not work either.
What specific error messages are you getting with the Facebook failures?
- The error pop up message is above
BUT.... What did work was mentioned in this chain.
I exported the image to an MP4 video then saved it onto my HD. The imported the image to Facebook

Zero BED value when posted J1IIN excise invoice from billing document

Hi Guys,
I created VA01, VL01N and VF01. Bed value is showing in VF03 but when I created J1IIN from billing document, BED value is zero. I checked several places like below
a) Logistics-General > Tax on Goods Movements > India > Account Determination > Specify Excise Accounts per Excise Transaction. Here ensure that for DLFC, necessary Account names are maintained.
b) Similarly, in the next tab, Specify G/L Accounts per Excise Transaction, ensure that for that Excise Group, relevant G/L Accounts are assigned
c) Finally, in Business Transaction tab, select Outgoing Excise Invoices where you need to ensure that you have assigned billing type to delivery type and also the default Excise Groups and Series Groups are maintained.
I couldn't figure it out where the problem is. Please help me where to check and what should be done for this?
Thanks,
Manohar.

I maintained excise defaults for TAXINN, I am maintaining A/R BED % which is coming in billing document but not in J1IIN. When I click on simulate it is giving a popup box saying 'No defaults could be proposed for Excise utilization' and click on continue then it is giving another message saying 'Excise modvat accounts not defined for GRPO transaction and E2 excise group'. Please help me what is it?
Thanks,
Manohar.

What is the column name when use select ... from table(my_table)

I have some code that takes a csv and loads it into a type table. I am now trying to select from this table but am not sure what column name to use in my cursor. (See below I have c2.???).
FUNCTION in_list_varchar2 (p_in_list IN VARCHAR2) RETURN VARCHAR2_TT is
l_tab VARCHAR2_TT := VARCHAR2_TT();
l_text VARCHAR2(32767) := p_in_list || ',';
l_idx NUMBER;
BEGIN
LOOP l_idx := INSTR(l_text, ',');
EXIT WHEN NVL(l_idx, 0) = 0;
l_tab.extend;
l_tab(l_tab.last) := TRIM(SUBSTR(l_text, 1, l_idx - 1));
l_text := SUBSTR(l_text, l_idx + 1);
END LOOP;
RETURN l_tab;
END in_list_varchar2;
schema_list := 'SCOTT, TOM, MIKE';
schema_names := regexp_replace(schema_list, '([^,]+)', '''\1''');
schema_list_t := DATAPUMP_UTIL.in_list_varchar2(schema_list);
for c2 in
select *from table(schema_list_t)
loop
dml_str := 'DROP USER ' || c2.??? || 'CASADE';
EXECUTE IMMEDIATE dml_str;
end loop;

Chris wrote:
I have some code that takes a csv and loads it into a type table. I am now trying to select from this table but am not sure what column name to use in my cursor. (See below I have c2.???).
FUNCTION in_list_varchar2 (p_in_list IN VARCHAR2) RETURN VARCHAR2_TT is
l_tab VARCHAR2_TT := VARCHAR2_TT();
l_text VARCHAR2(32767) := p_in_list || ',';
l_idx NUMBER;
BEGIN
LOOP l_idx := INSTR(l_text, ',');
EXIT WHEN NVL(l_idx, 0) = 0;
l_tab.extend;
l_tab(l_tab.last) := TRIM(SUBSTR(l_text, 1, l_idx - 1));
l_text := SUBSTR(l_text, l_idx + 1);
END LOOP;
RETURN l_tab;
END in_list_varchar2;
schema_list := 'SCOTT, TOM, MIKE';
schema_names := regexp_replace(schema_list, '([^,]+)', '''\1''');
schema_list_t := DATAPUMP_UTIL.in_list_varchar2(schema_list);
for c2 in
select *from table(schema_list_t)
loop
dml_str := 'DROP USER ' || c2.??? || 'CASADE';
EXECUTE IMMEDIATE dml_str;
end loop;
I have some code that takes a csv and loads it into a type table.Why a type table? Where is type table defined as such?
with PL/SQL, objects must be declared before they can be referenced.
You need to correct syntax errors before tackling any runtime/logic flaws.

Are the music beds provided in iMovie copywritten or can it be used when posting to Facebook?

I used a music bed provided with iMovie '09 into a video and tried to post it to Facebook. Later, I got a notice from Facebook claiming that the video contained copywritten material. Is the music in iMovie royalty free so that I can post it to the Internet?

You can use it in FaceBook. I think that Apple owns the Copyrights, but you are issued a license to use them.
You can find the legalese in this Apple Document, section 2 G iii.
It can be tricky, because sometimes musicians will use the Apple jingles under this same license, and then copyright the results. You will have to explain to YouTube or FaceBook that you are licensed through Apple to use the track. It is usually a good idea to provide a credits page at the end of your movie AND in the description on YouTube or FaceBook detailing where you got the music and how you are licensed, but this will not keep the record companies from hassling you if one of their artists has also used the samples.

Can't share to facebook directly from iPhoto

I can't make the facebook icon appear. I'mnot sure why it's not therem but when I check in the view pulldown menu, it just doesn't appear.

Ok, since posting this. I've worked it out : )

Struts tag problem when migrating to 7.0 from 5.1

          We currently have an application using struts running on WLS 5.1. When we use the
          application
          on WLS 7.0 and WLE 7.0 we get errors for the tag properties that are not defined
          in the tag
          library. In 5.1 WLS seemed to just ignore them and rewrite them but in 7.0 it
          seems to validate them so we can't actually include regular HTML tags.
          The JSP is:
          ', 'Terms', 600, 800 );">
          <html:img page="/jsp/images/viewbill.gif" width="78" height="19"
          border="0" target="_blank"/>
          </a>
          and the error message we are getting is:
          Parsing of JSP File '/jsp/pages/ViewMyBill.jsp' failed:
          /jsp/pages/ViewMyBill.jsp(40): for tag 'img' handler type 'org.apache.struts.taglib.html.ImgTag'
          has no property 'target'
          probably occurred due to an error in /jsp/pages/ViewMyBill.jsp line 40:
          </a>
          Wed Oct 29 11:21:50 GMT 2003 [Exception in:/jsp/pages/ViewMyBill.jsp] (line 40):
          for
          tag 'img' handler type 'org.apache.struts.taglib.html.ImgTag' has no property
          'target'
          weblogic.servlet.jsp.JspException: (line 40): for tag 'img' handler type 'org.apache.struts.taglib.html.ImgTag'
          has no property 'target' at
          weblogic.servlet.jsp.StandardTagLib.jspException(StandardTagLib.java:1087) at
          weblogic.servlet.jsp.StandardTagLib.addAllSetters(StandardTagLib.java:960) at
          weblogic.servlet.jsp.StandardTagLib.genericStartBegin(StandardTagLib.java:716)
          at
          weblogic.servlet.jsp.StandardTagLib.processStartTag(StandardTagLib.java:813) at
          weblogic.servlet.jsp.JspLexer.mOPEN_EXTENSION_TAG(JspLexer.java:2652) at
          weblogic.servlet.jsp.JspLexer.mTOKEN(JspLexer.java:2013) at
          weblogic.servlet.jsp.JspLexer.nextToken(JspLexer.java:1892) at
          <snip>
          In 5.1 this would result in the following HTML tag:
          <a href="javascript:openBareScrollableWindow( '/selfcare/GoViewMyBill.do',
          'Terms', 600, 800 );">
          <img src="/selfcare/jsp/images/viewbill.gif" height="19"
          width="78" border="0">
          </a>
          The struts.jar is located correctly in the WEB-INF/lib folder as are the tag libraries
          - it's the
          same folder structure for 5.1 and 7.0.
          Any ideas on what's wrong here appreciated.
          Thanks in advance,
          Brian Flannagan
          BT

          In the tld file include 'target' attribute for tag ImgTag.
          thanks,
          Deepak
          "Brian Flannagan" <[email protected]> wrote:
          >
          >We currently have an application using struts running on WLS 5.1. When
          >we use the
          >application
          >on WLS 7.0 and WLE 7.0 we get errors for the tag properties that are
          >not defined
          >in the tag
          >library. In 5.1 WLS seemed to just ignore them and rewrite them but in
          >7.0 it
          >seems to validate them so we can't actually include regular HTML tags.
          >
          >The JSP is:
          > ', 'Terms', 600, 800 );">
          > <html:img page="/jsp/images/viewbill.gif" width="78"
          >height="19"
          >border="0" target="_blank"/>
          > </a>
          >
          >and the error message we are getting is:
          >Parsing of JSP File '/jsp/pages/ViewMyBill.jsp' failed:
          >--------------------------------------------------------------------------------
          > /jsp/pages/ViewMyBill.jsp(40): for tag 'img' handler type 'org.apache.struts.taglib.html.ImgTag'
          >has no property 'target'
          >probably occurred due to an error in /jsp/pages/ViewMyBill.jsp line 40:
          ></a>
          >--------------------------------------------------------------------------------
          >
          >Wed Oct 29 11:21:50 GMT 2003 [Exception in:/jsp/pages/ViewMyBill.jsp]
          >(line 40):
          >for
          >tag 'img' handler type 'org.apache.struts.taglib.html.ImgTag' has no
          >property
          >'target'
          >weblogic.servlet.jsp.JspException: (line 40): for tag 'img' handler type
          >'org.apache.struts.taglib.html.ImgTag'
          >has no property 'target' at
          >weblogic.servlet.jsp.StandardTagLib.jspException(StandardTagLib.java:1087)
          >at
          >
          >weblogic.servlet.jsp.StandardTagLib.addAllSetters(StandardTagLib.java:960)
          >at
          >
          >weblogic.servlet.jsp.StandardTagLib.genericStartBegin(StandardTagLib.java:716)
          >at
          >weblogic.servlet.jsp.StandardTagLib.processStartTag(StandardTagLib.java:813)
          >at
          >
          >weblogic.servlet.jsp.JspLexer.mOPEN_EXTENSION_TAG(JspLexer.java:2652)
          >at
          >weblogic.servlet.jsp.JspLexer.mTOKEN(JspLexer.java:2013) at
          >weblogic.servlet.jsp.JspLexer.nextToken(JspLexer.java:1892) at
          >
          ><snip>
          >
          >
          >In 5.1 this would result in the following HTML tag:
          >
          > <a href="javascript:openBareScrollableWindow( '/selfcare/GoViewMyBill.do',
          >'Terms', 600, 800 );">
          > <img src="/selfcare/jsp/images/viewbill.gif" height="19"
          >width="78" border="0">
          >
          > </a>
          >
          >
          >The struts.jar is located correctly in the WEB-INF/lib folder as are
          >the tag libraries
          >- it's the
          >same folder structure for 5.1 and 7.0.
          >
          >Any ideas on what's wrong here appreciated.
          >
          >Thanks in advance,
          >
          >Brian Flannagan
          >BT
          >

With newest Mac OS, Lion, a print preview is no longer available when printing a page directly from the website.

When I used the operating system, Snow Leopard, there was no Firefox. Lion is the latest operating system and Snow Leopard was the latest system before Lion was introduced. Also, there is no problem when I use the native browser, Safari.

Doc: I've had a similar experience, and here are the details, investigation, and a workaround. My printer is a Brother MFC-645CN, and I'm using Snow Leopard (10.6.8) on a 2010 iMac quad i5 connected to the printer over my ethernet LAN. Are you using a Brother printer?
Firefox has shown this kind of nasty issue for the past six months or so. It seems to be related to the imaging algorithms in Preview when dealing with Firefox (now at v.12) and the Brother printer -- the screwy second page (and beyond) show up skewed and up-sized when doing a print preview also. No such problem seen in Safari or anything else. I am not currently using any other Mozilla apps on this Mac besides Firefox.
A few months ago I tested printing from my administrator account and a different user account. Firefox printing was completely normal and as expected. When I went back to my main user account, back came the funky second page.I went through extensive troubleshooting to try to chase it down, systematically removing and replacing apps and preferences and many other Library files related to printing, Brother drivers, Firefox, and Preview. Nothing helped. Solution was to migrate my user files to an account where the printing problem wasn't happening. I deleted the problem user account.
Everything was fine for about three weeks, and then with no warning, printing was back to the bad second page, just as before. I am stumped, and I'll let smarter people try to figure it out. I use Firefox a lot, and it's possible that some add-on setting is interfering, or a web page I visited turned the printing funky again. I just don't know.
Also checked on a Mac G4 running Leopard (10.5.8) and Firefox 3.6.28. No printing/preview problems there.
Now, for the work-around I am currently using -- print each page separately, one at a time. Page 1, then page 2, etc. Preview and printing looks completely normal. Hope this works for you until the bug is located and squashed for good.
Glenn

Tagging names when posting to facebook directly from picture

Similar Messages

Maybe you are looking for