Tags are not found when typing a keyword into the location bar

Previously when I typed a tag into the address bar - tagged bookmarks would show up. Now very rarely does this happen and instead search engine search terms show up.
To search for tags/keywords I now have to open the bookmarks and do a search in there. Very inconvenient... it suks big time. WTF happened?
Thanks Joe

I think I am on the way to an answer. I turned off ALL add-ons and tags are now showing up in adress bar searches.
Thanks! :-)

Similar Messages

Why don't I get google results when typing keyword into the location bar?

When typing keywords into the location bar, instead of taking me to Google I get a "problem loading page the connection was reset" error. And the domain it automatically takes me to is domainnotfound.Internetserviceprovider.net. Is there any way that if I don't type in a full url and just press enter it will give me the google results for those keywords? thank you for the assistance

Sounds that your ISP is detecting whether a DNS look up fails in redirect you to that optimum.net url.
In such a case you need to contact your ISP and ask them for alternative DNS servers that do not redirect you or you can set other DNS servers yourself.
*http://kb.mozillazine.org/Error_loading_websites#DNS

When typing an address in the location bar and pressing enter, nothing happens and the site does not load. How can I fix this?

When I type a new URL in the address bar (or location bar), and I either type the complete URL or select from the drop down list, nothing happens. I hit enter, and the website does not load in the current tab, new tab nor in a new window. Exactly the same when I hit the green arrow to the right of the address bar. I am using Firefox 8, and all my add-ins are up to date.
It has been working before. The setting to get Firefox to open new pages in a new tab from the address bar is there, so it should open a new tab. But I get nothing at all!
Please help, how can I fix this?
Thanks,
James.

That issue can be caused by an extension that isn't working properly.
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode

I can find many purchases in my purchase history, but they are not found when I "Check Available Downloads." How else can I download my purchases?

I can find many purchases in my purchase history, but they are not found when I "Check Available Downloads." How else can I download my purchases?

what happened to the initially downloaded files ? did you make a backup ? do you use time machine ?

My control center and notification center are not showing when I swipe in there respective locations. Does anybody know why?

My control center and notification center are not showing when I swipe in there respective locations. Does anybody know why?

Thank you for the sugestion, but it was working fine both on the lock screen and on my home screen. I check all my settings and it is how it was from Friday, when I got the iPhone 5s. It just stop working. The only way I can fix it is by shutting down the phone. It will work for a while, then it won't.

My sistem preferences are not working, when I try to change the photo of the desk It stop working, what can i do?

my sistem preferences are not working, when I try to change the photo of the desk It stop working, what can i do? I'm dieing cause I'm afraid

Have you tried resetting your device by pressing and holding the Home button and power button until the silver apple appears?

Touch ID in my iPhone six does not work when it's plugged into the wall is anybody else having this problem?

i've noticed a touch ID only works with my iPhone six is not plugged into the wall was soon as I plug it in it doesn't work anymore doesn't even register fingerprint.

Charger60 wrote:
i
Touch ID in my iPhone six does not work when it's plugged into the wall is anybody else having this problem?
No. You are the only one. The way I know is that I don't have the problem, therefore no one else can have it.
Seriously, no matter what problem you have, with a half billion iPhones in use, someone else will have the same or similar problem. So knowing that doesn't help solve it in the slightest. As it's new and still in warranty I would take it to an Apple store. Make a genius bar appointment first so you won't have a long wait.

Does firefox 4 have the 'feeling lucky' google search feature when you type phrases into the URL bar? ATM it goes to google where i then have to click on website.

if i type simply phrases in to the URL bar (i,e bbc) it use to take me directly to www.bbc.co.uk. but now in firefox 4, it seems to go to google.co.uk instead displaying all the searched items. I then have to click on the link i want.
Is there any way of enabling this?

The change between Firefox 3.6.* and Firefox 4 is how location bar search works. In Firefox 3.6 it uses Google "Browse by name" search. With the browse by name search, it performs a Google search and if there is a clear match it will take you to the site, otherwise it shows the Google search result. With Firefox 4 it just performs a Google search if you type something which is not recognised as a URL.
To get the Firefox 3.6 behaviour on Firefox 4 you need to change a hidden preference.
# Type '''about:config''' into the location bar and press enter
# Accept the warning message that appears, you will be taken to a list of preferences
# Locate the preference '''keyword.URL''', double-click on it and change its value to the link shown below
[http://www.google.com/search?ie=UTF-8&oe=UTF-8&sourceid=navclient&gfns=1&q= http://www.google.com/search?ie=UTF-8&oe=UTF-8&sourceid=navclient&gfns=1&q=]
If you prefer, you can also do this by installing the Browse by Name extension - https://addons.mozilla.org/firefox/addon/browse-by-name

JPA binding classes are not found when added at runtime

Hi,
I have my jpa binding classes in a jar file, which acts as a plugin for my application. I add this jar at runtime using a custom URL class loader. But I am getting exception that my tables are not mapped, when i try to use them.
Here is the exception :-
java.lang.IllegalArgumentException: org.hibernate.hql.ast.QuerySyntaxException: data_source_tab is not mapped [select d from data_source_tab d where d.url = ?1]
at org.hibernate.ejb.AbstractEntityManagerImpl.throwPersistenceException(AbstractEntityManagerImpl.java:601)
at org.hibernate.ejb.AbstractEntityManagerImpl.createQuery(AbstractEntityManagerImpl.java:96)
... 6 more
Caused by: org.hibernate.hql.ast.QuerySyntaxException: data_source_tab is not mapped [select d from data_source_tab d where d.url = ?1]
at org.hibernate.hql.ast.util.SessionFactoryHelper.requireClassPersister(SessionFactoryHelper.java:181)
at org.hibernate.hql.ast.tree.FromElementFactory.addFromElement(FromElementFactory.java:110)
at org.hibernate.hql.ast.tree.FromClause.addFromElement(FromClause.java:94)
at org.hibernate.hql.ast.HqlSqlWalker.createFromElement(HqlSqlWalker.java:316)
at org.hibernate.hql.antlr.HqlSqlBaseWalker.fromElement(HqlSqlBaseWalker.java:3228)
at org.hibernate.hql.antlr.HqlSqlBaseWalker.fromElementList(HqlSqlBaseWalker.java:3112)
at org.hibernate.hql.antlr.HqlSqlBaseWalker.fromClause(HqlSqlBaseWalker.java:720)
at org.hibernate.hql.antlr.HqlSqlBaseWalker.query(HqlSqlBaseWalker.java:571)
at org.hibernate.hql.antlr.HqlSqlBaseWalker.selectStatement(HqlSqlBaseWalker.java:288)
at org.hibernate.hql.antlr.HqlSqlBaseWalker.statement(HqlSqlBaseWalker.java:231)
at org.hibernate.hql.ast.QueryTranslatorImpl.analyze(QueryTranslatorImpl.java:254)
at org.hibernate.hql.ast.QueryTranslatorImpl.doCompile(QueryTranslatorImpl.java:185)
at org.hibernate.hql.ast.QueryTranslatorImpl.compile(QueryTranslatorImpl.java:136)
at org.hibernate.engine.query.HQLQueryPlan.<init>(HQLQueryPlan.java:101)
at org.hibernate.engine.query.HQLQueryPlan.<init>(HQLQueryPlan.java:80)
at org.hibernate.engine.query.QueryPlanCache.getHQLQueryPlan(QueryPlanCache.java:94)
at org.hibernate.impl.AbstractSessionImpl.getHQLQueryPlan(AbstractSessionImpl.java:156)
at org.hibernate.impl.AbstractSessionImpl.createQuery(AbstractSessionImpl.java:135)
at org.hibernate.impl.SessionImpl.createQuery(SessionImpl.java:1651)
at org.hibernate.ejb.AbstractEntityManagerImpl.createQuery(AbstractEntityManagerImpl.java:93)
If i directly add the jar in my build path, then it is working fine and it is creating the required tables. But the problem is, I get the hold on jar file at runtime.
Please help me with this.
Here is my classloader class :-
public class CustomURLClassLoader extends URLClassLoader
private static CustomURLClassLoader URLCLASSLOADER = null;
public CustomURLClassLoader(ClassLoader parent)
super(new URL[0], parent);
this.addAllJarsToClassPath();
* This method adds all the jars in the specified dirs and sub dirs
* recursively to the classpath. NOTE : Even though we use the term
* 'classpath' technically URLs are added to a list of URLs to search for
* classes and resources.
* @param dirContainingJars
* The directory containing jars
* @throws Exception
public void addJarsToClassPath() throws Exception
super.addURL("URL of jar file");
}

I don't know about hibernate, but EclipseLink allows passing in the classloader to the factory when it gets created as Shaun describes at:
JPA & Class Loaders
Best Regards,
Chris

Many random songs are not "found" by iTunes. How can I locate in bulk?

After I left external hard drive off, iTunes defalted to "c" drive for music file. I re-mapped itunes to my external drive yet many of my songs are not found. Why are some of my songs found while others are not? All the songs are on my external and when I individually "locate" not found songs they work fine. Is there a way to point iTunes to these songs in bulk rather than having to do each song individually??
PowerBook G4 Mac OS X (10.3.6)
PowerBook G4 Mac OS X (10.3.6)

Interesting, this is the first time I hear one can purchase songs via Facebook. Note that unless youpurchased the songs from iTunes, you will not be able to add them to the Music app on your iPHone.

After reset my Firefox no longer opens web pages automatically when I type the keywords in the Location bar. How do I fix this?

Before I reset my Firefox I was able to just type words in the Location bar and Firefox would redirect me to the website. For example, typing "reservoir dogs imdb" would redirect to the IMDB page of this movie, and typing a random sequence of characters would take me to (for example) a website of some company that uses these characters as the abbreviation of its name.
I never set this option anywhere, it was just like that for quite a long time. Now this possibility is gone for me and I can't seem to fix it.
I use the laters Mozilla Firefox 21.

Starting with Firefox 23 the keyword.URL pref is no longer supported and it is no longer possible to specify the search engine for the location bar that way (keyword.enabled still works to disable this search).
The search engine that is used on the location bar and on the about:home page is the search engine that is selected in the search Bar on the Navigation Toolbar.
You can install the Keyword Search extension to specify with search engine to use for the location bar and which search engine to use for the about:home page via the Options/Preferences windows of this extension, accessible via the about:addons page.
* Keyword Search: https://addons.mozilla.org/firefox/addon/keyword-search/

I have a macbook pro with OSX 10.9.3 and Safari 7.0.4. How do I remove BING FROM SEARCHING when i type something into the search bar

I have a macbook pro with OSX 10.9.3 and Safari 7.0.4. How do I remove BING FROM SEARCHING when i type something into the search bar

See below if the search engine setting was changed without your knowledge and you can't change it back.
You installed the "Genieo/InstallMac" rootkit. The product is a fraud, and the developer knowingly distributes an uninstaller that doesn't work. I suggest the tedious procedure below to disable Genieo. This procedure may leave a few small files behind, but it will permanently deactivate the rootkit (as long as you never reinstall it.)
Malware is constantly changing to get around the defenses against it. The instructions in this comment are valid as of now, as far as I know. They won't necessarily be valid in the future. Anyone finding this comment a few days or more after it was posted should look for more recent discussions or start a new one.
Back up all data. You must know how to restore from a backup even if the system becomes unbootable. If you don't know how to do that, or if you don't have any backups, stop here and ask for guidance.
Step 1
In the Applications folder, there may (or may not) be an application named "Genieo". Genieo may be partially installed even if this item is absent. If it's present, select it and open the Finder Info window. If it shows that theVersion is less than 2.0, download and install the current version from the genieo.com website. This may seem paradoxical, since the goal is to remove it, but you'll be saving yourself some trouble as well as the risk of putting the system in an unusable state.
There should be another application in the same folder named "Uninstall Genieo". After updating Genieo, if necessary, launch "Uninstall Genieo" and follow the prompts to remove the "newspaper-style home page." Restart the computer.
This step does not completely inactivate Genieo.
Step 2
Don't take this step unless you completed Step 1, including the restart, without any error messages. If you didn't find the Genieo application, or if you couldn't complete Step 1 for any reason, stop here and ask for instructions.
Triple-click anywhere in the line below on this page to select it:
/Library/Frameworks/GenieoExtra.framework
Right-click or control-click the line and select
Services ▹ Reveal in Finder (or just Reveal)
from the contextual menu.
If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
Go ▹ Go to Folder...
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.
A folder should open with an item named "GenieoExtra.framework" selected. Move that item to the Trash. You'll be prompted for your administrator password.
Move each of these items to the Trash in the same way:
/Library/LaunchAgents/com.genieo.completer.update.plist
/Library/LaunchAgents/com.genieo.engine.plist
/Library/LaunchAgents/com.genieoinnovation.macextension.plist
/Library/LaunchDaemons/com.genieoinnovation.macextension.client.plist
/Library/PrivilegedHelperTools/com.genieoinnovation.macextension.client
/usr/lib/libgenkit.dylib/usr/lib/libgenkitsa.dylib
/usr/lib/libimckit.dylib
/usr/lib/libimckitsa.dylib~/Library/Application Support/com.genieoinnovation.Installer~/Library/LaunchAgents/com.genieo.completer.download.plist
~/Library/LaunchAgents/com.genieo.completer.update.plist
If there are other items with a name that includes "Genieo" or "genieo" alongside any of those listed above, move them as well. There's no need to restart after each one. Some of these items will be absent, in which case you'll get a message that the file can't be found. Skip that item and go on to the next one.
Restart and empty the Trash. Don't try to empty the Trash until you have restarted.
Step 3
From the Safari menu bar, select
Safari ▹ Preferences... ▹ Extensions
Uninstall any extensions you don't know you need, including ones called "Genieo" or "Omnibar," and any that have the word "Spigot" or "InstallMac" in the description. If in doubt, uninstall all extensions. Do the equivalent for the Firefox and Chrome browsers, if you use either of those.
Your web browser(s) should now be working, and you should be able to reset the home page and search engine. If not, stop here and post your results.
Make sure you don't repeat the mistake that led you to install this software. Chances are you got it from an Internet cesspit such as "Softonic" or "CNET Download." Never visit either of those sites again. You might also have downloaded it from an ad in a page on some other site. The ad has a large green button labeled "Download" or "Download Now" in white letters. The button is designed to confuse people who intend to download something else on the same page. If youever download a file that isn't obviously what you expected, delete it immediately.
You may be wondering why you didn't get a warning from Gatekeeper about installing software from an unknown developer, as you should have. The reason is that the Genieo developer has a codesigning certificate issued by Apple, which causes Gatekeeper to give the installer a pass. Apple could revoke the certificate, but as of this writing, has not done so, even though it's aware of the problem. This failure of oversight is inexcusable and has compromised both Gatekeeper and the Developer ID program. You can't rely on Gatekeeper alone to protect you from harmful software.
Finally, be forewarned that when Genieo is mentioned on this site, the perpetrator of the scam sometimes shows up under the name "Genieo support." He will tell you to run the provided uninstaller. As he knows and intends, the uninstaller does not completely remove the malware.

Firefox no longer remembers history and prompts suggestions from keywords in the locations bar.

Since updating the latest version of Firefox 3.6, I can no longer type in a keyword or beginning of a url and get prompted for suggested urls in the location bar. I have chose in preferences to remember my history and offer suggestions in the tool bar but it doesn't work. Nothing comes up.

This can be a problem with the file places.sqlite that stores the bookmarks and the history.
* http://kb.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox

Some paragraph tags are not printing when document is printed from Framemaker 10.

So this is really odd. I have a situation where I have a document that I am developing in Framemaker 10 several different paragraph tags are intermittently not printing when the document is physically printed. When I go to print the document from Framemaker 10 to a physical piece of paper some tags are printing partially or not at all. What makes this stranger to me is that when I print the document to a PDF, all of the content and tags show up in the PDF. Then when I try to physically print from the PDF, the tags do no print from that document as well.
Typically the tags that are not printing are those that have been bolded, but are across several different tags. Also the problem is sometimes only to the first line of a tag, where if the tag carries over to a second line in the document, the text on the second line prints. Another quirky instance that shows up is where the text a line will print only parts of the text. The document uses the same type font for the entire document, Helvetica 55 Roman. The font size varies and the coloring varies as well, but this issue is happening for all sizes and colors.
I'm not sure what additional information is important here, but if you need additional information please request it and I will supply it to the best of my ability. I'm a content developer with an intermediate amount of experience with Framemaker.

I'm not sure if this is the same problem, and you didn't mention your
OS, but there was a widespread problem with dropped text in PDF with
Windows XP. A hotfix was issued to fix it. If on Windows XP, you should
install it:
http://blogs.adobe.com/techcomm/2008/07/hotfix_for_framemaker_1.html
Also, you mentioned that it was "bolded" text that tended to have the
problem. Bolded text is artificially bold and does not use actual bold
fonts. (If I recall, text is double printed at a slight offset to give
the appearance of a bold font.) So there is no bold font to embed. Be
sure you install and use an actual bold font, rather than using the
bolded characteristic, or you could see problems.
This is a stretch, but you also mentioned that some of the problem
sections have colored text. Check the printer properties of your Adobe
PDF virtual printer to make sure someone didn't reassign the driver (on
the Advanced tab). It should be set to use the Adobe PDF Converter
driver (or Acrobat Distiller in older Acrobat versions). Years ago,
people sometimes changed this setting to use other drivers for various
reasons, not realizing that they limited themselves to the capabilities
of that driver. So, if they chose an HP LaserJet PostScript driver, for
example, their documents might no longer be able to be 11"x17" or
color-- because the printer couldn't handle it. The driver was limited
to 8.5"x14" and black-and-white. Perhaps there is a driver set that is
choking on the colored text-- though I would think it would merely
convert it to B&W.
Okay, I've grasped at enough straws.

BI IP - Upload flat file - "requested resource not found" when typing URL

Hi,
we tried to implement the "upload flat file" functionality (blog Marc Bernard). We followed the different steps and included the bug fixes as well. When we want to launch the URL in an internet explorer session we get message "requested resource not found".
Hereby the URL used:
http://sapscmbid.vpkgrp.int:50100/sap/bc/webdynpro/sap/zrsplf_file_upload?sap-language=EN&planning_sequence=FILE_SEQ&show_messages=WEXA
Do you know what we did wrong? We would like to finish this by the end of this week ...
kind regards
D

Hi,
when we use URL http://sapscmbid.vpkgrp.int:50100/ we see the screens of the portal so I presume this server and port is accurate (we use the same link for the planning modeler and this works fine).
The SICF service zrsplf_file_upload has been imported and has status active. Should we check other things as well?
D

Tags are not found when typing a keyword into the location bar

Similar Messages

Maybe you are looking for