Tags are not working as I wish

2 problems:
- If a folder is not indexed on spotlight, then tags don't work on it.
- I can't add any folder of my NAS which is in the local network.

I had the same problem!! It may be a software problem... try going to settings and tapping restore network settings! If that doesn't help go backup your phone and restore it it may solve that too! If those two don't work its a hardware problem and you need to pay... There are some stores that can replace the inside for a cheaper price... try searching the internet!

Similar Messages

Anchor tags are not working on internet explorer when using touch devices

Hi,
I have a simple anchor tag like <a href=http://www.google.com></a>
Using a mouse there is no problem but when I use a touch device (windows 8.1/windows Phone 8.1), all that will happen when people touch it is that the link will be highlighted.
I don't want to highlight it, I just want the link to open.
Double clicking the link will zoom in the page. It takes several attempts tapping the link to actually open it... this is VERY frustrating.
How can I remove this highlighting non-sense?
I found an article that seems to indicate this was done on purpose:
http://blogs.msdn.com/b/ie/archive/2013/07/31/ie11-touch-browsing-for-today-s-web-and-beyond.aspx
It's a total failure if you ask me and it is very frustrating to use my site on a touch device.
Anyone has any idea on how to make links behave normally?
Best Regards,
Peter

seems that it is something in SharePoint that is causing this behavior
So you would probably be better off posting in a Sharepoint forum. They would be more familiar with all the products involved. This is an example where newsgroup cross-posting would be useful but it does not exist in forums.
Otherwise, sounds like you are going to have to find the implementation involved and then devise a workaround for it. Is there a publicly accessible example of the coding used for what you are seeing? You could use the Developer Tools (or View
Source) to try to look at it yourself.
For a guess it may involve Active Scripting. If the link can be used even if Active Scripting is disabled you could achieve that result simply by changing the security level or zone that the site is regarded with.
BTW with your example link above I have the opposite problem. I can't touch it to try to select it without launching it. Here's a workaround for that: select a word before the link, use the selection's wheels to extend it to include
the link, then reduce it to include only the link, then, I can use press and old on the selection without launching the link. (In fact since I always leave press and hold disabled I used my pen with its right-click barrel button to see the selection's
menu though if I use my pen's barrel button, I don't need to make the selection to see just a reduced menu which would be sufficient to use the link.) In any case, I imagine that just as I can do a press and hold on the selected text of
the link without launching it you may just as easily be able to do a press and hold to see the selection's menu to allow you to launch its link.
HTH
Robert Aldwinckle

Keyboard and trackpad are not working, Keyboard and trackpad are not working

I'm using MBP 15" late 2008 with Maverick OS. A couple of days ago, the internal keyboard and trackpad are not working at all. I did all the troubleshooting. I even reformat it; installing the snow leopard and re-installing the maverick but no good result. I believe there's no problem with my keyboard because i can still do PRAM on my lappy. Everytime i'm booting up my MBP, it always looking for bluetooth trackpad and keyboard. I have not used those bluetooth peripherals from day 1 i've started using MBP. I just read on the internet about the same problem has happened on MBP 13" retina and APPLE fixed it by updating the software. I wish Apple will also do something for the old MBP to fix the intermal keyboard and trackpad problem.

Reset SMC. http://support.apple.com/kb/HT3964
Choose the method for:
"Resetting SMC on portables with a battery you should not remove on your own".

A STANDARD XML TAG IS NOT WORKING PROPERLY WHEN USED IN RTF FILE FOR XML RE

Hi,
I am using the following tag :
<?if:TASK_STATUS='Open'?><xsl:attribute xdofo:ctx="block“name="color">red</xsl:attribute>
<?end if?>
for changing foreground color of text which depending on certain conditiosi need to print in
pdf format using xml reports and rtf files.
But i was able to get only 3 colors (Red,Blue,Green) for use, other colors such as orange,cyan etc are not
working.
Please let me know what all colors are supported by oracle in printing in pdf format using xml reports.
Suggest if we need to do some settings related stuff or so.
I am usning XML 5.6.3 version.
Regards,
Amar

Colors can be expressed by known name and by a hex value. The hex value format is widely used in HTML programming, and has a format of #abcdef, and "abcdef" can be values like aaddcc and so on. For some primary colors, you can get away with #abc, but that is not very common.
You should always design with Web-safe colors in mind. That limits you to 16, but should be plenty for most purposes (plus all 16 have known names like red, cyan, yellow, etc.).
http://www.w3schools.com/Html/html_colors.asp has a good explanation of the standards.

Case statement and Decode function both are not working in Select cursor.

I have tried both the Case statement and Decode function in Select cursor, but both the things are not working. On the other hand both the things work in just select statement.
See the first column in select (PAR_FLAG), I need to have this evaluated along with other fields. Can you please suggest some thing to make this work. And also I would like to
know the reason why decode is not working, I heard some where Case statement do not work with 8i.
Author : Amit Juneja
Date : 06/20/2011
Description:
Updates the Diamond MEMBER_MASTER table with the values from
INC.MEM_NJ_HN_MEMBER_XREF table.
declare
rec_cnt number(12) := 0;
commit_cnt number(4) := 0;
cursor select_cur is
Select DECODE(1,
(Select 1
from hsd_prov_contract R
where R.seq_prov_id = PM.seq_prov_id
and R.line_of_business = H.line_of_business
and R.PCP_FLAG = 'Y'
and R.participation_flag = 'P'
and SYSDATE between R.EFFECTIVE_DATE AND
NVL(R.TERM_DATE,
TO_DATE('31-DEC-9999', 'DD-MON-YYYY'))),
'Y',
'N') PAR_FLAG,
H.SEQ_ELIG_HIST,
H.SEQ_MEMB_ID,
H.SEQ_SUBS_ID,
H.SUBSCRIBER_ID,
H.PERSON_NUMBER,
H.EFFECTIVE_DATE,
H.TERM_DATE,
H.TERM_REASON,
H.RELATIONSHIP_CODE,
H.SEQ_GROUP_ID,
H.PLAN_CODE,
H.LINE_OF_BUSINESS,
H.RIDER_CODE_1,
H.RIDER_CODE_2,
H.RIDER_CODE_3,
H.RIDER_CODE_4,
H.RIDER_CODE_5,
H.RIDER_CODE_6,
H.RIDER_CODE_7,
H.RIDER_CODE_8,
H.MEDICARE_STATUS_FLG,
H.OTHER_STATUS_FLAG,
H.HIRE_DATE,
H.ELIG_STATUS,
H.PREM_OVERRIDE_STEP,
H.PREM_OVERRIDE_AMT,
H.PREM_OVERRIDE_CODE,
H.SEQ_PROV_ID,
H.IPA_ID,
H.PANEL_ID,
H.SEQ_PROV_2_ID,
H.SECURITY_CODE,
H.INSERT_DATETIME,
H.INSERT_USER,
H.INSERT_PROCESS,
H.UPDATE_DATETIME,
H.UPDATE_USER,
H.UPDATE_PROCESS,
H.USER_DEFINED_1,
H.SALARY,
H.PEC_END_DATE,
H.REASON_CODE,
H.PEC_WAIVED,
H.BILL_EFFECTIVE_FROM_DATE,
H.BILLED_THRU_DATE,
H.PAID_THRU_DATE,
H.SUBSC_DEPT,
H.SUBSC_LOCATION,
H.USE_EFT_FLG,
H.BENEFIT_START_DATE,
H.SEQ_ENROLLMENT_RULE,
H.MCARE_RISK_ACCRETION_DATE,
H.MCARE_RISK_DELETION_DATE,
H.MCARE_RISK_REFUSED_DATE,
H.COMMENTS,
H.USER_DEFINED_2,
H.USER_DEFINED_3,
H.RATE_TYPE,
H.PCPAA_OCCURRED,
H.PRIVACY_ON,
H.PCP_CHANGE_REASON,
H.SITE_CODE,
H.SEQ_SITE_ADDRESS_ID,
PM.seq_prov_id rendered_prov
from hsd_member_elig_history H,
INC.PCP_REASSIGN_RPRT_DATA P,
hsd_prov_master PM
where P.subscriber_id = H.subscriber_id
and P.rendered_pcp = PM.provider_ID
and H.elig_status = 'Y'
and (H.term_date is NULL or H.term_date >= last_day(sysdate))
order by H.Seq_memb_id;
begin
for C in select_cur loop
rec_cnt := rec_cnt + 1;
update hsd_member_elig_history
set term_date = TRUNC(SYSDATE - 1),
term_reason = 'PCPTR',
update_datetime = SYSDATE,
update_user = USER,
update_process = 'TD33615'
where seq_elig_hist = C.seq_elig_hist
and seq_memb_id = C.seq_memb_id;
INSERT INTO HSD_MEMBER_ELIG_HISTORY
(SEQ_ELIG_HIST,
SEQ_MEMB_ID,
SEQ_SUBS_ID,
SUBSCRIBER_ID,
PERSON_NUMBER,
EFFECTIVE_DATE,
TERM_DATE,
TERM_REASON,
RELATIONSHIP_CODE,
SEQ_GROUP_ID,
PLAN_CODE,
LINE_OF_BUSINESS,
RIDER_CODE_1,
RIDER_CODE_2,
RIDER_CODE_3,
RIDER_CODE_4,
RIDER_CODE_5,
RIDER_CODE_6,
RIDER_CODE_7,
RIDER_CODE_8,
MEDICARE_STATUS_FLG,
OTHER_STATUS_FLAG,
HIRE_DATE,
ELIG_STATUS,
PREM_OVERRIDE_STEP,
PREM_OVERRIDE_AMT,
PREM_OVERRIDE_CODE,
SEQ_PROV_ID,
IPA_ID,
PANEL_ID,
SEQ_PROV_2_ID,
SECURITY_CODE,
INSERT_DATETIME,
INSERT_USER,
INSERT_PROCESS,
UPDATE_DATETIME,
UPDATE_USER,
UPDATE_PROCESS,
USER_DEFINED_1,
SALARY,
PEC_END_DATE,
REASON_CODE,
PEC_WAIVED,
BILL_EFFECTIVE_FROM_DATE,
BILLED_THRU_DATE,
PAID_THRU_DATE,
SUBSC_DEPT,
SUBSC_LOCATION,
USE_EFT_FLG,
BENEFIT_START_DATE,
SEQ_ENROLLMENT_RULE,
MCARE_RISK_ACCRETION_DATE,
MCARE_RISK_DELETION_DATE,
MCARE_RISK_REFUSED_DATE,
COMMENTS,
USER_DEFINED_2,
USER_DEFINED_3,
RATE_TYPE,
PCPAA_OCCURRED,
PRIVACY_ON,
PCP_CHANGE_REASON,
SITE_CODE,
SEQ_SITE_ADDRESS_ID)
values
(hsd_seq_elig_hist.nextval,
C.SEQ_MEMB_ID,
C.SEQ_SUBS_ID,
C.SUBSCRIBER_ID,
C.PERSON_NUMBER,
trunc(SYSDATE),
C.TERM_DATE,
C.TERM_REASON,
C.RELATIONSHIP_CODE,
C.SEQ_GROUP_ID,
C.PLAN_CODE,
C.LINE_OF_BUSINESS,
C.RIDER_CODE_1,
C.RIDER_CODE_2,
C.RIDER_CODE_3,
C.RIDER_CODE_4,
C.RIDER_CODE_5,
C.RIDER_CODE_6,
C.RIDER_CODE_7,
C.RIDER_CODE_8,
C.MEDICARE_STATUS_FLG,
C.OTHER_STATUS_FLAG,
C.HIRE_DATE,
C.ELIG_STATUS,
C.PREM_OVERRIDE_STEP,
C.PREM_OVERRIDE_AMT,
C.PREM_OVERRIDE_CODE,
C.SEQ_PROV_ID,
C.IPA_ID,
C.PANEL_ID,
C.SEQ_PROV_2_ID,
C.SECURITY_CODE,
SYSDATE,
USER,
'TD33615',
SYSDATE,
USER,
'TD33615',
C.USER_DEFINED_1,
C.SALARY,
C.PEC_END_DATE,
C.REASON_CODE,
C.PEC_WAIVED,
C.BILL_EFFECTIVE_FROM_DATE,
C.BILLED_THRU_DATE,
C.PAID_THRU_DATE,
C.SUBSC_DEPT,
C.SUBSC_LOCATION,
C.USE_EFT_FLG,
C.BENEFIT_START_DATE,
C.SEQ_ENROLLMENT_RULE,
C.MCARE_RISK_ACCRETION_DATE,
C.MCARE_RISK_DELETION_DATE,
C.MCARE_RISK_REFUSED_DATE,
C.COMMENTS,
C.USER_DEFINED_2,
C.USER_DEFINED_3,
C.RATE_TYPE,
C.PCPAA_OCCURRED,
C.PRIVACY_ON,
C.PCP_CHANGE_REASON,
C.SITE_CODE,
C.SEQ_SITE_ADDRESS_ID);
commit_cnt := commit_cnt + 1;
if (commit_cnt = 1000) then
dbms_output.put_line('Committed updates for 1000 records.');
commit;
commit_cnt := 0;
end if;
end loop;
commit;
dbms_output.put_line('Total number of MEMBER_ELIG_HISTROY records inserted : ' ||
rec_cnt);
exception
when others then
raise_application_error(-20001,
'An error was encountered - ' || sqlcode ||
' -error- ' || sqlerrm);
end;

user10305724 wrote:
I have tried both the Case statement and Decode function in Select cursor, but both the things are not working. Please define what you mean by not working even if your computer screen is near the internet we can't see it.
You should also look at the FAQ about how to ask a question
SQL and PL/SQL FAQ
Particularly *9) Formatting with {noformat}{noformat} Tags* and posting your version.
know the reason why decode is not working, I heard some where Case statement do not work with 8i.
Does this mean you are using 8i? Then scalar sub queries - selects within the select list, are not supported, along with CASE in PL/SQL.
Select DECODE(1,
* (Select 1
from hsd_prov_contract R
where R.seq_prov_id = PM.seq_prov_id
and R.line_of_business = H.line_of_business
and R.PCP_FLAG = 'Y'
and R.participation_flag = 'P'
and SYSDATE between R.EFFECTIVE_DATE AND
NVL(R.TERM_DATE,
TO_DATE('31-DEC-9999', 'DD-MON-YYYY')))*,
'Y',
'N') PAR_FLAG,
>
exception
when others then
raise_application_error(-20001,
'An error was encountered - ' || sqlcode ||
' -error- ' || sqlerrm);
http://tkyte.blogspot.com/2008/01/why-do-people-do-this.html

My ring and text tones are not working?

Both my ring tone and text alert tone are not working. I'm only made aware I have a call or text message through the phone's vibration. I have checked all the 'Sound' settings and all appears to be fine and ringer volume slid to high.
Do I need to reboot this phone for them to work as I'm not sure how to do this? I'm using iPhone 4 version 5.0.1
Would I loose all my files and apps on my iPhone after rebooting?
Appreciate any clear help and advice on this popular subject that is available.
Best wishes
Sizo65

Thank so much Ingo2711, your suggestion has solved my problem. I am so new to the iPhone I didn't realise it had a handy little mute button and it was infact switched onto 'mute'.
And thank you for the rebooting advice too.
Best wishes
Sizo65

Links in the webview are not working.

Hello Everybody,
I am showing data in the webview using one custom html page. In this custom html page , I am using css to make the font better and then passing my required data in the respective tabs. In one this tag i.e. description tag, I am passing the description html data in that links are also present. WebVIew is showing the data in page correctly but links present in that page are not working. When I am clicking on those links, they are not getting open in the webview.
I am working on this issue from two days but no solution I found.
Is there anything , I am missing?
Can anyone here, help me out?
Pandit

Hi Satake,
Sorry for the late response.. I was out for some days...
Actually , there was presence of target= {blank}, but I removed it from that html string as per your advice but didn't work.
The html page which I am showing in the webview is custom webview , I mean it's a html template and I am passing description data in one description tag.. and that description data is having that link that is not opening after clicking on it.
On the other hand , if I passed only html data without html template file then it is working fine.
Is there any problem in my html template page which is a custom page? Or I need to add any property in the description tag to enable the links?
Pandit

In dubai FT,siri are not working in case when we move other country could we activate those feature in that country

in dubai FT,siri are not working in case when we move other country could we activate those feature in that country

Facetime is disabled in hardware per request of Dubai government. It
will not work if you move to another country. If you move and wish to utilize
Facetime, sell your iPhone before moving and get a new one at your new
location.
Apple has not announced if/when Siri will work in Dubai.

Hp pavilion 1012tu usb 2.0 ports are not working

my hp pavilion 1012tu USB 2.0 ports are not working only the 3.0 port is working

Try this:
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c01893385
or
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&dlc=en&docname=c03327635
Wish you luck,
Karthik
--Say "Thanks" by clicking the Kudos (purple thumbs up icon in the lower right corner of a post)
--Please mark the post that solves your problem as "Accepted Solution"

DHCP Option Tags are not being applied...

Hi,
About to loose my mind... basically we are working towards a small WYSE Thin Client deployment in our environment. The WYSE clients require to receive certain DHCP Option Tags to find the WCM server of which they receive their configuration from. Same
applies to the WDM Server as well. The problem is no matter what we do, our test client is not receiving the custom option tags we've defined in our DHCP server.
DHCP Servers:
vlan41
10.40.1.206
10.40.1.207
Test Client:
vlan46 - ip helpers defined on the switch
Set to receive the same ip address from the DHCP server through the reservation route.
Option Tags:
186 - WDM Server - 10.40.1.184
195 - WCM Server - 10.40.1.185
196 - WCM Path - /
I've installed Wire Shark on the test client to monitor the DHCP activity. The above custom options tags are not being pushed on to the client.
The Router, DNS Server and Domain Tags are being pushed. So it's working but also not working????!!!
Anybody with some insight to this problem?

Hi hpaul_p
In all fairness I'm about to give up... the vendor is not coming up with a solution and constantly blaming Microsoft. To further test and confirm this wasn't a network issue, I've setup a secondary test environment using a 4 port switch, a client and
a DHCP server. Same results!!! I'm really running out of time, so my work around is this: I've setup a SRV records pointing to the WCM server... in your case this would be SRV record for the WDM server. I've disabled the auto
discovery functionality of the WDM Agent, for some reason it seems to be clashing with the WCM agent. Since you will be using WDM only, don't disable auto discovery, tick the DNS SRV record from the Discovery Settings under the client agent.
I'm going to add the clients to the WDM server manually through their ip addresses so don't need auto discovery. From what I gather from the manuals the WCM searches for the repository or conifg servers in this order: 1. SRV 2.DNS (A record)
3.DHCP (Options), I bet it's the same with WDM. Though SRV and DNS methods has their limitations, if you will be using the default paths and credentials it shouldn't be a problem. This is all I have have. Steven Song I've forwarded you the
DHCP database, if you find any problems with it please let me know.

CURVE 8520 - KEYS ARE NOT WORKING

Need assistance to guide as the qwerty pad, navigation and other keys are not working. when conncting the phone to laptop, the alarm confirmation appears and cannot cancel or open other file.
already restart the phone and removed the memory card but still problem occurs.
Solved!
Go to Solution.

Perfom a back up from your device information , the make an update if your device dont have any update make a force detection or just a reset of factory settings if the error continues you need a warranty replacement.
Back up steps:
For a backup of the data on a BlackBerry smartphone, complete the following steps:
    Click on Device from the upper left-hand corner of the BlackBerry Desktop Software and select Back up from the drop-down list, or simply click Back Up Now from the main screen of the BlackBerry Desktop Software.
    Mark the appropriate customization level ( Full, Quick, Custom).
    If your smartphone includes built-in media storage and you want to back up data that is stored there, select the Files saved on my built-in media storage check box.
    Input a file name if desired, or leave the default text.
    Leave the Encrypt backup file unchecked.
    Select Back up.
Update steps:
    Connect the smartphone to the computer.
    On the home screen of the BlackBerry Desktop Software, click Update.
        To download an update, click Get update.
        To view other available versions of the BlackBerry Device Software, click View other versions. If applicable, click another version. Click Install.
    Do any of the following:
        To keep a backup file of your smartphone data and settings, select the Back up your device data checkbox. This backup file is restored to the smartphone after the update is complete. If the data is not backed up, the smartphone data, settings, and email messages are deleted from the smartphone after the update is installed.
        To encrypt the backup data, click Encrypt backup file.
        Select the Keep me subscribed to email notifications checkbox to receive email updates when new versions of the BlackBerry Device Software become available.
    Click Install update.
When the confirmation message that the update is complete is displayed, the BlackBerry smartphone may be disconnected.
Force Detection :
Remove the battery from the back of the BlackBerry smartphone.
Connect the BlackBerry smartphone to the computer using a USB cable.
Once prompted to Retry, Update or Cancel, click Update. If available updates are found Desktop Manager will prompt you to Get Update, Update Later or View other versions
Click Get Update to install the recommended software version or View other Versions to manually select the version you wish to install and click Install.
In the Update Options screen there is the option to enter the email address to be notified in future when there may be new software versions available.
    fill in the checkbox and enter the email address in the text field to receive email notifications
    uncheck the checkbox and leave the text field blank to not receive updates.
Reinsert the Battery which was removed in step 1
Click Install Update
Reset Factory Settings steps:
    In the top right corner of the BlackBerry Desktop Software, click on the ? in the top right hand corner of the BlackBerry Desktop Software.
    Click Support Resources
    Then Support Tools
    Click the Reset button under the heading Reset to Factory Settings.
Any question let me know.!

Click Boxes are not working

I'm currently working on a course that contains a main menu screen that then branches off to several course modules. On the main menu I have placed several click boxes that jump to the slides within the course. Of the 5 click boxes that I have placed on the main menu, 2 are not working although they are set exactly like the other three with the exception of the slide that they are jumping to.
The click box setting are as follows:
Jump to slide (set to the slide that contains desired content)
Appear as of 0 seconds
remain for rest of slide
Infinate attempts
Show hand over hit area
Pause project until user clicks.
I have tried to delete the offending click boxes and rebuild. Copy a click box that functions and simply change the jump to slide number. Rebuild the entire slide (resulting in the same situation of the 3 click boxes that worked continuing to work and the 2 that didn't, not working.) I have built several main menu screens in the sam manner in several courses with out any problems. Please help me to understand what could possibly be the issue.
Thanks,

Hi there
Do you have a quiz in the project? If so, you could have your quiz settings configured so that questions MUST be answered before you may continue.
For example, perhaps you have a 40 slide project. You have some buttons on slide five. Button one jumps to slide six. No problem. Button two jumps to slide 20. No problem. But Button three tries to jump to slide 30. And on slide 28 you are asking a True/False question. Your quiz settings may declare that the question on slide 28 MUST be answered before you may continue. In that case the button would appear to fail and not jump to slide 30 because the question on slide 28 hasn't been answered.
Cheers... Rick
Helpful and Handy Links
Begin learning Captivate 5 moments from now! $29.95
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcererStone Blog
Captivate eBooks

HT201401 my earphones are not working on my iphone4 to play, stop or forward to other tracks or answering a call and i know its not the earphones as ive just paid out for a new pair at £27.99 and still wont work anybody got any advice as fed up honestly

anyone can you help my earphones are not working on my iphone4 and i know its not the earphones has just bought new pair and no joy I can not play, stop, forward to different tracks or anything cant answer call nothing end of ideas can anyone help pretty please

Yes there genuine apple earphones I have now blown down jack slot and silly enough I turned my phone off and now it's back on earphones working properly now feeling a wee but silly as such a simple thing got them working.
Thank you guys and I know where to come again if I need any further assistance.
Again thank you everyone

Text messages ringtones are not working in the Storm Two

Device: Storm Two running OS version 5.0.0.713 on the Verizon Wireless network.
Recently, I upgraded from a Storm One to a Storm Two because of a multitude of issues with the Storm One; not enough memory, constant lock-ups; dropped calls, etc. On the Storm One I had customer ringtones for contacts; so when a contact calls me the phone will sound a specific ringtone for that contact; the same for text messages from that contact. Now that I have the Storm Two the text message tones for the contacts are not working. In fact, even when I select a ringtone for text messages for a contact the phone will ring the generic ringtone that comes with the phone. If I go into the sound profile and change the generic ringtone to one of my own and the contact sends me a text/sms message the phone will ring the ringtone that I selected in the profile that is being used at the time. This is not the way it worked on the Storm One. On the Storm One; if I have a specific ringtone for the contact and that contact sends me a text message it will sound the text messages tone for that contact. These ringtones have worked for previous devices including my Treo and Palm devices. The ringtone files worked well in the previous Storm One.
So to make a long story short; I want to know why my text message ringtones are not working as designed/setup-up. If a contact calls me the phone will sound the ringtone for that contact; but if that same contact text me it will not ring the ringtone for the contact. This is annoying and I am at my wits end trying to find out why this is not working.
Vernon

Hi Jain....
Field separator is for separating the fields.That means it will effect every field in the node.
But end separator is not like that.It will apply at the end ofall fields of a node.It will effect node not a field.
according to ur scenario if u use data.endseparator 'nl',output will come like this
2008/0701$101
2008/0701$102
2008/0701$103
2008/0702$105
if u want new line for every field try to insert a separate node for second field.That means
MT_DATATYPE:
Data -
1:UnBounded
. .OrderDate----
1:1
<Data2> 1:1
. ....OrderNo -
1:1
now give data.endseparator 'nl'
data2.endseparator 'nl'
if possible try like this....
Sreedhar Goud L

Page Break In XML Publisher RTF Templates Are Not Working

Please refer to the Metalink Doc below:
Subject:      Page Break In XML Publisher RTF Templates Are Not Working.
Doc ID:      559111.1
Type:      PROBLEM
Modified Date:      24-MAR-2008
Status:      MODERATED
In this Document
Symptoms
Cause
Solution
References
This document is being delivered to you via Oracle Support's Rapid Visibility (RaV) process, and therefore has not been subject to an independent technical review.
Applies to:
Oracle XML Publisher - Version: 5.6.3
This problem can occur on any platform.
Symptoms
Using XML Publisher version 5.6.3 in 11.5.10.
Find <?split-by-page-break:?> syntax is ignored.
EXPECTED BEHAVIOR
Expect page breaks to occur at point set by "split-by-page-break:" code.
STEPS
The issue can be reproduced at will with the following steps:
1. Create a template.
2. Call split-by-page-break: inside a loop.
3. Output is not formatted correctly, page break call is ignored,
Cause
Unpublished BUG 5011628 SPLIT-BY-PAGE-BREAK NOT WORKING IF ADDED SORT WITHIN DYNAMIC GROUP
Unpublished BUG 5011628 matches the client issue as it is a call to split-by-page-break inside a loop.
Fix is in ScalableStringList.java version 115.4.
This is delivered in <Bug 6165466> XDOFX:CHR(N) FUNCTION FAILING.
Solution
To implement the solution, please execute the following steps:
1. Apply Patch 6165466 when it is released.
2. Test your report.
References
Bug 6165466 - XDOFX:CHR(N) FUNCTION FAILING
Keywords
XML~PUBLISHER; LOOP; DYNAMIC~GROUP; PAGE~BREAK;
Help us improve our service. Please email us your comments for this document. .

Hi JDev,
Check this out:
http://oracle.anilpassi.com/xml-publisher-developing-reports-printed-on-pre-printed-stationary-2.html
Hope this might help.
Thanks

Tags are not working as I wish

Similar Messages

Maybe you are looking for