Tags created in Organizer missing from Window folder details

I am using Photoshop 5 and regularly tagging all input.  When I use windows to see the list of what files are in a folder only a few of the tags are listed?
I do not understand.

The tags are not normally written to the files, so they are not normally visible in Windows. The reason for this is that PSE wants you to use tags in the Organizer, not Windows, to find your files.
If you need to have the tags available via Windows, you can select all of your photos in the Organizer and then File->Write Tags and Properties...
Note: this command fails for some types of Raw files.

Similar Messages

  • Not booting after creating a fat32 partition from windows 8 from boot camp

    I have windows 8.1 on a boot camp partition. I created a  fat32 partition from windows looking forward to be able to share files to Yosemite OSX. But now, neither the OSX or the windows are booting. When pressing options key is only abailable one option, a disk tagged as "windows", and after trying to use it, it refers to a error message "UNMOUNTABLE_BOOT_VOLUME". I really really appreciate any help regarding this issue.

    Your entire disk is a MBR disk. You will need to erase the disk, and start from the beginning and install Yosemite/Mavericks, and then use BC Assistant to create  a Windows partition and install Windows. If you have a Time Capsule/Time Machhine backup, you can restore it after your erase using the command below.
    You can erase the disk as follows
    diskutil eraseDisk JHFS+ OSX disk0
    Here is the Usage help syntax.
    diskutil erasedisk
    Usage:  diskutil eraseDisk format name [APM[Format]|MBR[Format]|GPT[Format]]
            MountPoint|DiskIdentifier|DeviceNode
    Completely erase an existing whole disk.  All volumes on this disk will be
    destroyed.  Ownership of the affected disk is required.
    Format is the specific file system name you want to erase it as (HFS+, etc.).
    Name is the (new) volume name (subject to file system naming restrictions),
    or can be specified as %noformat% to skip initialization (newfs).
    You cannot erase the boot disk.
    Example: diskutil eraseDisk JHFS+ UntitledUFS disk3

  • When syncing my iTunes to my iPad from the laptop, I get a list of missing songs; they are in the library, but not in the music folder on my HD. In particular, I uploaded 3 CDs at the same time, all are in my library - but two are missing from the folder.

    When syncing my iTunes to my iPad from the laptop, I get a list of missing songs; they are in the library, but not in the music folder on my HD. In particular, I uploaded 3 CDs at the same time, all are in my library, and all synced to the iPad - but the music from two of them are missing from the music folder. Questions are (a) where might they have gone? and (b) is there a way of "reverse loading" them back to my hard drive from the iPad? Thanks in advance!

    Hi dones49,
    It sounds like your issue here is that iTunes can not find the files for some of the songs you have brought into it. This happens occasionally even if the songs have not been moved from the location that iTunes places them on import or purchase. When you try to use the song, iTunes prompts you to find the file, as you have seen.
    To find the file, use the information in this article to navigate through the iTunes media folders -
    Locate and organize your iTunes files
    If you are still unable to locate the files, you may need to download them from the iTunes store again, or rip them from your CDs. See this article for assistance with downloading your past purchases -
    Download past purchases
    Thanks for using Apple Support Communities.
    Best,
    Brett L 

  • Default Camera App Tile Missing and Won't Launch from c:\windows\camera. Also missing from Windows Store to reinstall.

    Hi There,
    I am deploying a custom windows 8.1 enterprise image via SCCM to Surface Tablets in our corporate environment.  We currently are using windows 8 ONLY on surface hardware.
    We only have 4 in the wild but all are having the same issue.  The camera app tile/shortcut is missing from the all applications menu.
    If I try to launch it from the c:\windows\camera folder i receive an error regarding Windows.UI.Xaml.dll as I believe it needs to be  called via the modern environment (not desktop).
    It dose not appear to be a hardware issue as third party camera apps seem to work.
    Also, when i search for the app in windows store it cannot be found.  I can find it when i search the store via IE but when I click on the link to open it in the windows store i am only presented with the stores front page.
    Any advice would be appreciated as my users are keen to use the camera on their surface pro 3's.
    Thanks

    This sounds as though the Camera app has become corrupt in your image. I would attempt to reimage one of the devices with a vanilla environment to see if the issue appears, if not, I would
    evaluate the difference between the Camera app in the vanilla environment and the production environment. Specifically, you may need to ensure that the correct version of Camera is provisioned in the base image.
    Brandon
    Windows Outreach Team- IT Pro
    Windows for IT Pros on TechNet

  • Adding Asset Tag information into the Bios from Windows 7

    Hi
    I am wondering whether there is a utility that will enable me to add Asset tag information into the bios from within windows 7 . We have various models mainly T410 / T420 ' but alos some X201 / X220's
    Firstly is there such a utility ?
    secondly is there one for all ?
    If not is anyone able to suggest how this maybe done . Manual entry at the bios level on thousands of Laptops is just not possible. The end result is for the asset information to be picked up in SCCM and tracked
    Thanks
    Andy 
    Solved!
    Go to Solution.

    Hi AndyG, and welcome to the Lenovo User Community!
    Windows 7/Vista/XP:
    http://support.lenovo.com/en_US/detail.page?LegacyDocID=MIGR-75237
    DOS:
    http://support.lenovo.com/en_US/downloads/detail.page?DocID=DS013515
    Enjoy!
    I don't work for Lenovo. I'm a crazy volunteer!

  • Photo transfer from windows folder to ipad not working?

    I have transferred photos from a folder on my Windows7 desktop to my IPad yesterday however, I am unable to transfer any tonight.  Anyone
    know why ?

    You can try resetting your iPad by simultaneously pressing and holding the Home and Sleep/Wake buttons until you see the Apple Logo. This can take up to 15 seconds so be patient and don't release the buttons until the logo appears.
    Try again to see if the problem persists.

  • Auto scan files from windows folder

    I am having trouble updating the iTunes library automatically? e.g. when I delete a file from my folder where all my music is stored the Library in iTunes does not do a refresh and pick up the change?
    Please help because this is getting irritating because I have to keep importing the folder into iTunes.

    iTunes does not have an auto-refresh or scan feature as you desire.
    If you delete a music file on the PC (outside of iTunes), you will be left with a broken song reference within iTunes.
    Delete both the reference and file by using iTunes.

  • App store icon is missing from Applications folder in mac 10.6.8.How can i reinstall that?

    Hi,
    Appstore icon is missing from applications foler. my mac version is 10.6.8. Can you pleae help on this?

    Hi...
    Install the Mac OS X 10.6.8 Update Combo
    That will reinstall the App Store for you. It's ok to do this even though you are already running v10.6.8.
    Restart your Mac after the combo is installed.

  • Boot Camp Utility Missing From Windows 7

    Hi all,
    I'm running an 8-core Mac Pro blah blah blah with 3x1t hard drives. I've used the Boot Camp utility to make one of those 1t hard drives into windows 7.  This worked perfectly, in fact I'm currently typing from Windows 7. However...
    When I've done this previously there was always a Boot Camp utility within Windows 7 (in the bottom right of my task bar) which allowed me to switch back from Windows 7 to Mac, and vise versa... This time the Boot Camp utility within Windows 7 which allows me to go back to Mac has disappeared ... I'm stuck in Windows 7!
    Any idea why this might be? And how I can might download Boot Camp or something to rectify this problem?
    Thanks in advance,
    Matt

    Your OS X 10.6 DVD has the 3.0.4 drivers and you would then need to update 3x to get to 3.3
    So do you or did you get to 3.2 at least? 3.0 and 3.1 were buggy.
    Mounting and accessing HFS drive volumes was also causing BSODs; and does not work when there are Apple array volumes.
    There is also and better place to look is control panels: Boot Camp with its own startup disk section
    'x' on startup = Mac OS
    Check Services and startup items. You should have
    OSSwitcher
    Apple TimeServices (without which time will be off every time you switch OS)
    Programs control panel: Boot Camp there? try Repair.
    Lion allows downloading Boot Camp 4.x driver from Boot Camp Assistant to put on USB device or elsewhere that you access in Windows.
    www.apple.com/support/bootcamp guide faq how to articles etc
    Maybe you have a corrupt system and time to do a chkdsk and also boot from Windows DVD and allow it to do system repair or restore from a good check point

  • Finder - Create new files directly from a folder using finder ?

    In Finder, is there a way to do a right-click in a folder and create a new file like: New Text File or New Document from that location?
    I used to do this oftenly in Windows (right click, New Word document) but I have not found it in Mac OS X, any work around ?
    Thanks

    Try the [Apple feedback page|http://www.apple.com/feedback>. However, note that this is unlikely to be added. It would be a very cumbersome feature.
    On Windows, you're almost guaranteed to be tied to a particular set of document creation tools. If you're using an office suite other than MS Office, you're so weird you might as well be using a Mac! This means that commands like "New Document" make sense there.
    On a Mac, a "document" could be created with MS Word, Pages, TextEdit, NeoOffice, OpenOffice, Mellel, Nisus Writer Marinter Write, or any of a host of other programs. (Mac users tend to put less emphasis on the popular tool and prefer to use the tool that "fits the hand" best.) Further complicating things is the fact that "document" is a very generic term, since every spreadsheet is a document, every Photoshop file is a document, etc. The contextual menu would rapidly become unmanageable if it had to fill up with "New Whatever Document" commands for every app on your hard drive!
    It is possible for you to add your own custom services to the contextual menu using AppleScript or Automator, and you should be able to create services to create new documents for the apps you use frequently. Check on the [AppleScript forum|http://discussions.apple.com/forum.jspa?forumID=724] for guidance on how to do this.

  • Contents missing from SMSPKGx$ folder

    We've enabled "Copy the Content in this package to a package share on distribution points:" option in package share setting for faster imaging process.
    However, one of our DP is missing half of its content in smspkgx$ which results in immediate failure when task sequence runs. We are forced to create a new task sequence to download and run package option for this site while we are looking into this issue.
    This site has a poor bandwidth and we do not wish to redistribute these big packages. Is there a command to extract and copy the content from its library to its smspkgx$ folder?

    Hi,
    How about PkgXferMgr.log on the site server?
    Best Regards,
    Joyce
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • Cannot create bootcamp, cannot boot from Windows DVD or Bootcamp USB.

    2011 Mac Mini, running 10.9 Attempting to create a bootcamp installation. Note that I have done this many times with other Macs, including similar Mac Minis.
    I get through the Bootcamp assistant process of downloading windows support files and creating a USB drive for the install, I partition the internal 500gig hard drive in half. On reboot all I get is a black screen. Not a Black screen with flashing cursor, no error of any kind, just completely black, I have waited for over 45 minutes and it never changes. I have repeated this process several times, letting bootcamp assistant remove the partition in between, with several versions of the .iso file. I have recreated it from an original Windows 7 Pro 64bit. I have downloaded an iso of the same from Microsoft. None give any different results. I have reset the PRAM. I have a external Apple superdrive and have booted up to startup disk manager and can see that the USB is a valid boot, the Windows DVD is valid and there is an option for EFI Boot. None work, all give the exact same black screen with nothing. When booting from the Windows DVD, you can hear it spin up and read for a short while, then is stops. I have read and tried all the related posts here and on any web site I can find, although there are few and most just point back to the same articles here.
    Help, tis is driving me crazy! I know it can be done, but there is something at work here I can't figure out.

    You need to use a USB2 flash drive for BC Drivers/Windows ISO, not a USB3 stick. Windows installers do not support USB3 out-of-the-box. On Macs, BC drivers will later add support for USB3.

  • InDesign CC - "Create App" option missing from Folio Builder panel

    I am using Windows 7, InDesign CC. 
    While watching a Terry White video I made an app along wth the tutorila All works fine in the Desktop Viewer. When it reaches the point of going to the "Folio Builder" panel mine does not have the "Creat App" option that Terry White has.  Is this because I have windows not
    Mac?

    Yes, a Mac is required to create DPS apps.

  • Iphone 4s icon missing from windows 7 64bit

    when my iphone 4s is plugged into my computer running windows 7 64bit, the apple icon doesn't show up.  instead, a generic camera icon shows up.  is there a way to fix this?
    thank you!

    Possibly. The only thing I could think to tell you is to Google and find an icon you'd like to use, and then navigate to c:\\windows\\system32\\Shell32.dll (back this file up immediately) then use a program like 7zip to extract all of the contents, put your custom icon in and rename it what the default portable device icon is named (you'll have to rename that one something else first), and then re-compress the whole package and paste it into the system 32 folder (make sure it is named the same thing as the original dll, and then it should give you that pop-up window, click replace) and then hope it works. If not, get rid of the modification immediately and replace it with the original, so as to not induce a fatal exception and blue-screen your PC.

  • Time machine backup is missing from WD_Backup folder!

    Hello,
    I have a MyBook World Edition 1TB that i am using it for time machine, the WD_Backup folder ( in Mybook ) is empty but when checking the MyBook webpage it's saying 80% ( around 900 GB ) of the HD is used!, like the data is there but i cant see it in finder. I have tried to check from another mac and still can't see it. This time machine backups are really important , hope anyone can guide me to at least check if the data is there and if i can recover it.
    Regards.

    Backing up to a third-party NAS with Time Machine is risky, and unacceptably risky if it's your only backup. This is an example of what can happen.
    If you want network backup with Time Machine, use as the destination either an Apple Time Capsule or an external hard drive connected to another Mac or a mini-tower (802.11ac) AirPort base station. Only the 802.11ac base station supports Time Machine, not any previous model.

Maybe you are looking for