Tagtool (Audio Tag Tool) doesn't start

Strange,
when I try to start tagtool, this error occurs:
I/O warning : failed to load external entity "/home/$user/.tagtoolrc"
** (tagtool:19769): WARNING **: Failed to read preferences file
When I create this .tagtoolrc file, it becomes this:
/home/$user/.tagtoolrc:1: parser error : Document is empty
^
/home/$user/.tagtoolrc:1: parser error : Start tag expected, '<' not found
^
** (tagtool:19777): WARNING **: Failed to read preferences file

[khaoohs@T60: /usr/share/tagtool]$ tagtool
/home/khaoohs/.tagtoolrc:1: parser error : Document is empty
^
/home/khaoohs/.tagtoolrc:1: parser error : Start tag expected, '<' not found
^
** (tagtool:25105): WARNING **: Failed to read preferences file
4a948c43-5840-d7d7-37fffaf2-221bdb44 is dumped
I get this error when trying to use tagtool. Can someone post an example .tagtoolrc file? I don't see any documentation on the app's website.

Similar Messages

  • Config Tool doesn't start from the application list

    Hi all,
    I have installed Planning, EAS, and Workforce on a server but when I go to configure the tools, the config tool doesn't start from the page where you select the applications to configure. Instead, it starts with all the apps listed with the message: "You have selected the above apps to configure" and it has a Back button but it doesn't work, and it has a Next button and when I press it, it says Done.
    I need to configure the database and deploy to the application server.
    The Shared services is on a different server and is up and running. Essbase is on a separate server and that's up and running.
    I am working with 11.1.1.3 32 bit applications on a 64 bit Windows OS.
    If you have run into this, please let me know what am I missing?
    Thanks

    Hi
    First of all I couldnt get your problem as in your query description you have written "sometimes the video doesn't skips a couple of seconds from the beginning even though the value of NetStream.time property is 0" which is contradictory with the query title "Video doesn't start from the beginning".
    But anyways I think you should check ns.time in Play.Start there you should get always 0 but in Buffer.Full there may be the case that ns.time is not 0 but has some value but that value is very small less than 1.
    If still you have issue please clarify your problem then probably I will be able to answer your query.
    Regards,
    Amit

  • Jack-audio-connection-kit doesn't start

    Hi,
    I need jack-audio-connection-kit Daemon running for use in some other programs, but it seems it dies immediately after starting. See:
    [ja@kamahl ~]$ sudo /etc/rc.d/jack-audio-connection-kit start
    :: Starting Jack-audio-connection-kit Daemon [DONE]
    [ja@kamahl ~]$ ps -e|grep jack
    <no output>
    I know this is a bit dumb question, but I really have no clue where the problem could be. Do you?

    hello,
    i'm having the same problem, i can flawlessly run jackd either via CLI and qjackctl, test sound with mplayer, etc.
    However, i can't seem to find a solution that let's me do all this as a normal user:
    Error output:
    jackd -d firewire
    Password:                                     
    no message buffer overruns                     
    jackd 0.116.2                                 
    Copyright 2001-2005 Paul Davis and others.     
    jackd comes with ABSOLUTELY NO WARRANTY       
    This is free software, and you are welcome to redistribute it
    under certain conditions; see the file COPYING for details   
    JACK compiled with System V SHM support.
    loading driver ..                       
    can't load "/usr/lib64/jack/jack_firewire.so": libasound.so.2: failed to map segment from shared object: Resource temporarily unavailable                                                                                 
    cannot load driver module firewire
    some info:
    $cat /etc/fstab
    # /etc/fstab: static file system information
    # <file system>        <dir>         <type>    <options>          <dump> <pass>
    none                   /dev/pts      devpts    defaults            0      0
    ####none                   /dev/shm      tmpfs     defaults            0      0
    shm /dev/shm tmpfs nodev,nosuid,noexec 0 0
    #/dev/cdrom             /media/cd   auto    ro,user,noauto,unhide   0      0
    #/dev/dvd               /media/dvd  auto    ro,user,noauto,unhide   0      0
    #/dev/fd0               /media/fl   auto    user,noauto             0      0
    UUID=512fbb4a-7c37-4a91-94fd-c2f75bc3ad1c swap swap defaults 0 0
    UUID=ce95308e-a444-4d12-a3bf-a1abdcc82eed / ext4 defaults 0 1
    lsmod | grep 1394                   
    dv1394                 21832  0
    ohci1394               34052  1 dv1394
    raw1394                29000  0
    ieee1394               98912  3 dv1394,ohci1394,raw1394
    Should I change udev rules group to audio? How do I do that in Archlinux? :$
    $ ls -l /dev/raw1394
    crwxrw-rw- 1 root video 171, 0 2009-07-12 14:31 /dev/raw1394
    I think it's some sort of permission problem....Any suggestion is welcome! thank you!

  • Audio crossfade tool doesn't work?

    Hi ,
    Maybe its a well known bug but reading in the Apple pro training book by Martin Sitter , I noticed that the fade tool in the Arrange window doesn't work.
    Or am I doing something wrong?
    (B.t.w. This tool isn't discribed in the standard manual??)
    Ron.
    Powermac 5, 2x2ghz   Mac OS X (10.3.9)  

    Check out the following recent thread on the topic:
    http://discussions.apple.com/message.jspa?messageID=1290541

  • OBIEE - Administration tool doesn't start up

    Where to start...
    I go to Start >> All Programs >> OBI >> and select Administration, and I get the outer glass symbol for around 4 seconds and nothing happens.
    I have these Services Running: Oracle BI Java Host, Oracle BI Presentation Server, and Oracle BI Server.
    I have OC4J running as well.
    This didn't work but since it did for everyone else on my team I initially figured that I installed it wrong. So I reinstalled it. The thing that makes this odd, is that after the installation, I attempted to open the tool and it worked. THIS WAS BEFORE I RESTARTED MY COMPUTER. I restarted my computer and it now goes back to the initial outer glass and then nothing.
    Someone mentioned to clear my temporary internet files, and I have done so with nothing happening.
    Please Help
    Thanks
    Chris B.

    If nothing else works, try reinstalling your JDK

  • Remote Update Manager on Yosemite doesn't start

    Hi to all, I have recently updated my 15 iMac (year 2012) to Yosemite.
    After the upgrade, the Adobe Remote Update Manager tool doesn't start, with an error 1.
    In the console, I see these lines:
    Any suggestions?
    Many thanks

    Same problem here on my wife's mid-2012 Macbook Air. Really annoying.

  • If I have soundflower selected as audio input. My stream on twitch doesn't start.

    If I have soundflower selected as audio input. My stream on twitch doesn't start, even tough it says in the logs it's streaming as usual. When I have my microphone selected, the stream starts perfectly fine.
    If you need more info, please do tell me!
    Kind regards and a happy christmas from a frustrated gamer.

    Mail troubleshooting - Yosemite
    Troubleshooting sending and receiving email messages
    Troubleshooting sending email messages
    SMTP servers keep going offline

  • Beats audio doesn't start with windows

    Hi,
        beats audio doesn't start with windows. when i log into windows, no beats icon shows in the notification area.
    it only works when i go to Control Panel and open up beats audio control panel, then the icon shows up.

    Hi @MadGrin 
    Welcome to the HP Forums!
    It is a terrific place to find answers.
    For you to have the best experience in the HP forum I would like to direct your attention to the HP Forums Guide Learn How to Post and More
    How Do I Find My Model Number or Product Number?
    When I checked the driver page for DV5000  I noticed it came with either XP or Vista.
    Have you checked for any HP  bios updates for your notebook?   If not you could try that but please be aware that updating the bios does have a potential to cause damage. For this reason I suggest contacting HP support for assistance with that process .
    Updating the BIOS
    Please call our technical support at 800 474 6836. If you live outside the US/Canada Region, please click the link below to get a support number for your region.
    World Wide Phone Support
    Have you checked compatability for Windows 8.1.  Windows compatibility Center
    There is a option to scan your computer to check if your apps and device work.
    Have you done all the updates for Windows 8.1?
    Good Luck!
    Sparkles1
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

  • How do I get my HTML5 audio tag to work in Firefox 7.0.1, currently it doesn't even display the alternate text when the player cannot play.

    This is my implementation of the audio tag.
    <pre><nowiki><div class="music_player" oncontextmenu="return false;">
    <audio autoplay="autoplay" controls="controls" preload="auto">
    <source src="sample.ogg" />
    <source src="sample.mp3" />
    <span id="audio_error">This website has an audio sample, but cannot play using this browser.
    </span>
    </audio>
    </div></nowiki></pre>

    Make sure that the server sends the ogg file with a supported MIME type.
    * https://developer.mozilla.org/En/Media_formats_supported_by_the_audio_and_video_elements
    * https://developer.mozilla.org/en/Configuring_servers_for_Ogg_media

  • Xorg doesn't start on Macbook Pro 4,1

    I've just installed Arch on my Macbook Pro 4,1 (Early 2008).
    The machine has this graphics card:
    VGA compatible controller: NVIDIA Corporation G84M [GeForce 8600 GT] (rev a1)
    I've installed "nvidia" package driver, launched "nvidia-xconfig" but when I try to launch:
    X -config /etc/X11/xorg.conf
    Xorg gives me some errors and doesn't starts X.
    http://i.imgur.com/AtzHf77l.jpg
    Ideas?
    -- mod edit: read the Forum Etiquette and only post thumbnails http://wiki.archlinux.org/index.php/For … s_and_Code [jwr] --

    Yeah it is quite a mess... but thats what you get when you try to use hardware that picks and chooses the bits of the UEFI standard it wants to include.
    So like most UEFI systems, Mac(book)s are able to boot their own system with it's EFI setup.  It *can* also be used to boot other systems, but setting it up is unique to Macs.  So for the purpose of "bootcamp", Apple introduced a bios compatibility mode.  When it was introduced, there was no real windows UEFI prevalence (existence?) at that point.  So that is how they made this possible.
    But the compatibility mode is not turned on by default.  OSX uses GPT (according to the standard and everything in this case), but when it makes a "bootcamp" partition it adds to the GPT a MBR partition table (ms-dos) with partitions.  According to the GPT spec, there is the actual GPT partition table, but there is also the inclusion of a MBR with a single partition spanning the whole disk.  This is to protect the disk from being overwritten by non-GPT aware tools (like fdisk was until recently).  So a hybrid MBR simply adds partitions to the ms-dos partition table that (hoepfully) line up with at lease the first few partitions of the GPT.  When this is present, the machine will enable the bios compatibility mode.
    Booting the Mac with EFI will have no bearing on the Arch Linux installation that is installed in bios compatibility mode.  It will use its own bootloader and everything.  So there should be no issue.  It is probably good to use something like rEFInd in order to give yourself a nice interface with which to select between the two though.  The other boot loaders and/or boot managers don't have the ability to recognize both EFI and bios bootloaders.

  • HTML 5 audio tag not working in FF

    I am developing a website in asp.net and html 5 and trying to add some audio to the site.
    My site is:
    http://www.kevinroseworld.com/music.aspx/
    It is, currently, a very simple set up, just the one song. It works fine in Chrome and Safari, IE does not support the Audio tag and the message appears where it is supposed to, however, Firefox does not display the error message or play the audio file.
    I started using FF 3.6.10 and have now upgraded to FF 4 Beta 6 and neither version works.
    Any advice as to how to fix this?
    I also had a look on other forums and found others with the same problem: http://www.manifestmusicproductions.com/soundsNonflash.php for example, works in Chrome/Safari but not in FF.

    well for anyone else.
    my html was fine. in fact the server nginx was returning the wrong content-type and so i had to add the MIME types into my nginx config file.

  • Spry tabbed panels and "The tag: "li" doesn't have an attribute: "tabindex" ..."

    Hi,
    I've been using the DW CS4 "Spry Tabbed Panels" on a few pages. When I validate the website (with DW tool for that), I get the following messages for each use of the tabbed panels: The tag: "li" doesn't have an attribute: "tabindex" in currently active versions. [XHTML 1.0 Transitional].
    Should I worry about this? I'd like to have a code as clean and XHTML valid as possible. Is there a way to fix this so the message doesn't come up anymore?
    Emilie
    Example of code this message is linked to:
    <div class="TabbedPanels" id="TabbedPanelsADMS">
      <ul id="TabUL" class="TabbedPanelsTabGroup">
        <li id="TabLI1" class="TabbedPanelsTab" tabindex="0">About</li>
        <li id="TabLI2" class="TabbedPanelsTab" tabindex="0">Assets</li>
        <li id="TabLI3" class="TabbedPanelsTab" tabindex="0">Input</li>
        <li id="TabLI4" class="TabbedPanelsTab" tabindex="0">Output</li>
        <li id="TabLI5" class="TabbedPanelsTab" tabindex="0">Support</li>
        <li id="TabLI6" class="TabbedPanelsTab" tabindex="0">Purchase</li>
      </ul>
      <div class="TabbedPanelsContentGroup">
        <!-- TabLI About -->
        <div class="TabbedPanelsContent">
          <!-- end #TabbedPanelsContent TabLI About -->
        </div>
        <!-- TabLI Assets -->
        <div class="TabbedPanelsContent">
          <!-- end #TabbedPanelsContent TabLI Assets -->
        </div>
        <!-- TabLI Input -->
        <div class="TabbedPanelsContent">
          <!-- end #TabbedPanelsContent TabLI Input -->
        </div>
        <!-- TabLI Output -->
        <div class="TabbedPanelsContent">
          <!-- end #TabbedPanelsContent TabLI Output -->
        </div>
        <!-- TabLI Support -->
        <div class="TabbedPanelsContent">
          <!-- end #TabbedPanelsContent TabLI Support -->
        </div>
        <!-- TabLI Purchase -->
        <div class="TabbedPanelsContent">
          <!-- end #TabbedPanelsContent TabLI Purchase -->
        </div>
        <!-- end #TabbedPanelsContentGroup -->
      </div>
      <!-- end #TabbedPanelsADMS -->
    </div>

    Should I worry about this? I'd like to have a code as clean and XHTML valid as possible. Is there a way to fix this so the message doesn't come up anymore?
    If validation is important to you, you need to remove tabindex. Should you worry about it? Not really. Sometimes it makes sense to ignore validation to achieve a particular goal, which is why Spry widgets use tabindex in a technically invalid way.
    The explanation as to why Spry does that can be found here: http://blogs.adobe.com/spryteam/2007/03/spry_widgets_and_tab_index.html.

  • Red Eye Tool doesn't work in ACR 4.1

    The Red Eye tool doesn't work on my computer in Camera Raw 4.1/Bridge. When I choose it, the Pupil Size and Darken sliders appear but nothing happens when you try a correction. If I open the same image in Photoshop CS3, the Red Eye control works fine. How can I get it to work in in ACR?

    Ramon is right. Best to select the whole eye (even eyebrow) and you'll get the overlay box around the red. If it doesn't entirely cover the red (or if it box bounds some reddish eyelids) you can click and drag to widen(lessen) or lengthen the box and change the 'pupil size'. And so far I haven't found any, even bright, redeyes where the 'darken' control won't get a good dark result. [Animals (green/yellow eyes) are a different story.] Sometimes going too dark will also darken the irises. With the 'show overlay' unchecked you can drag the 'fix' off the eye onto the cheek to see the pattern - dark in the center and then a gradient fade of dark going out from center. "Clear all" clears all of course and you can start over.

  • Integration Builder doesn't start after SP11

    Hi,
    I am installing a new XI 3.0 SP1 system on Linux (SLES8). After installation, everything worked fine, I patched the system to stack 11. After this patch, the Integration Builder Configuration doesn't start anymore, the Java Web Start error message being 'JAR resources in JNLP file are not signed by same certificate'. The option 'Re-initialization and force-signing' in Java Web Start Administration has no effect.
    Any ideas anyone?
    Thanks & Regards,
    Jos

    Hi Jos,
    I had exactly the same problem. After discovering that 'Cummulative patch for XI TOOLS 3.0 SP11' miraculously disappeared from download area in SAP Marketplace I decided to undeploy whatever was possible from this patch (com.sap.aii.security.ws.proxy, com.sap.xi.directory, com.sap.xi.ibresources, com.sap.xi.repository, com.sap.xi.rwb and com.sap.services) and deploy 'Support Package 11 for XI TOOLS'.
    Both Integration Builder links (Repository and Directory) are working again.
    Another question is valid now: How to fix whatever Note 825655 supposed to (Patch 1 for SP11 XI3.0 contained fix described in this note)? I'm hoping that SAP Support could solve this problem soon.
    Best regards,
    Marek

  • T530 Dolby Sound Driver doesn't start

    Hi
    Everytime I start Windows on my T530 I get an error message from Dolby Advanced Audio that the Dolby sound driver can't be startet and that I have to restart the computer or reinstall the driver.
    I reinstalled and restarted several times but it still doesn't work.
    Before this problem I had another error message that the hardware and the driver didn't correspond so I downloaded the driver for the T530 from Leonvos homepage. But the new driver doesn't start.
    What do I do?
    Regards, Rasmus

    I tried to reinstall the old driver that came with the system but now I get the error message (same as before I updated to the new driver):
    The existing Dolby audio driver version is 7.2.8000.17 and the software application expects the driver version 7.2.7000.7. Install a valid combination of driver and software application.
    I'd be thankfull if someone can help me out here.
    Kind regards

Maybe you are looking for

  • Video tearing on my 24" iMac

    I have been having an issue with my 24" iMac for the past couple of months and I was wondering if you have heard of this issue before. I am getting what I guess would be described as video tearing. On occasion, and with no obvious pattern to it, I wi

  • How do I use For loop to check each node and import them to a new document?

    In my function I would like to use a For loop to get all the statutes (xml) inside the object objXmlBcaResponseDoc. In my case there are 2 statutes. I would like the output to look like the one I have posted here below. I am not sure how to do the Fo

  • Clarrification fro FTP Server issue

    Hello, This is in regard to the problem we are facing with FTP server at sender side. In channel configuration, FTP Connection Parameters Server : Enter the host name or IP address of the FTP server. Can we give the IP address if we have any problem

  • Is Adobe FLash builder 4.7 compatible with flex sdk 3.5?

    Is Adobe FLash builder 4.7 compatible with flex sdk 3.5?

  • Forms 6.0 Trigger firing order

    Hi, I have a master-detail form where I "execute_query" during new_form_instance. I display 5 master records and for the current master all detail records with one detail being current. The cursor focus is in the master block. I'm looking for the las