Tak and surf at the same time

For those wondering, it can be done while on wifi, I just tried it out.

natureboy229 wrote:
is verizon going to allow talking and surfing the web if so wheni
You will see this with the 4G network that is being developed. According to recent news, they just tested the first simultaneous call and data transmission on the VZW network without a hitch.

Similar Messages

Why cant i talk and surf at the same time?

Why cant i talk and surf at the same time? Got lost yesterday and while on the phone i couldn't search store web to get the address. Perfect timing to figure this out; when you're lost. This is a MAJOR problem for me and anyone on the go. WHEN WILL THIS BE FIXED??? I will not hesitate to return this phone as im sure all TURBO users feel the same. Someone said the MOTO X was the same way... is it still...why hasn't then been fixed by now? Which now makes me wonder if this wasn't an oversight but something intentional. Why did they hide the fact that they knew this was going on? i should have been told that this capability wasn't available on the TURBO at time of purchase. FIX IT NOW!

ChristiLockridge wrote:
And i've had every DROID since the original with the exception of the Bionic.
Then you have had phones WITHOUT the capability of talk/surf at the same time. If you don't realize this, then you don't(or at least didn't) use it as often as you think. Original Droid didn't have this capability. Droid X didn't have this capability. Droid X2 didn't have this capability. For the most part(there may have been exceptions of which I am unaware), NO Verizon phone had this capability until 4G phones and then ONLY when on a 4G LTE signal. 4G phones on a 3G signal did not/do not have this capability.
ChristiLockridge wrote:
The same as texting, or calling or browsing. This is just a given.
Personally, I check these things on EVERY phone before I purchase. This is just a given.

Droid Turbo talk and surf at the same time

Hello,
So I just brought my Droid Turbo home and have started testing it. I bought it knowing that it only had one antenna, but I had read that a new update was pushed that allowed for simultaneous talk and surfing. My software update is up to date (21.44.12.en.US), and the notes on the update even mention this feature was included in the update (why it is a "feature" and not a standard is beyond me). I just tried it again, and I can't surf and talk at the same time. Can someone explain this issue; is it only possible when using advanced calling over XLTE? The discussions I could find on here were all dated 6 months ago (before the latest update).
Thanks.

Yes, they both have to have Advanced Calling for HD voice to work....but that is not what the OP was inquiring about. You can do simultaneous calls and data with the Turbo with ANY other phone (cell or landline) as long as you have Advanced Calling enabled on your phone. The HD is an EXTRA feature that makes for better call quality if both have Advanced Calling, but I assure you that you can make regular voice calls the same as with any other device, AND use data calling any cell or landline once you have it enabled on the Turbo.

Will Verizon Stop encrypting sim cards for iPhones so users can talk and surf at the same time?

Will Verizon stop encrypting iPhone sim cards so users can surf and talk simultaneously?

I can prove that this is not the case. I travel abroad monthly and have sim cards for these 2 countries i frequent and i can surf and talk at the same time. The claim that it needs another antenna does not support my findings. Can we be more transparent please. As a costumer i find it highly inconvenient to have to hang up a call with someone just to access an email.
>> Personal information removed to comply with the Verizon Wireless Terms of Service <<
Edited by: Verizon Moderator

Why can't I charge my Samsung 4GLTE wifi hotspot and surf at the same time?

Is the charger too weak to charge the device and surf the internet at the same time?

Works for me, have done it several times since I got mine. Something that is totally useless with the old 3G MiFi after they upgraded it.

Talk and surf at the same time

is verizon going to allow talking and surfing the web if so wheni

natureboy229 wrote:
is verizon going to allow talking and surfing the web if so wheni
You will see this with the 4G network that is being developed. According to recent news, they just tested the first simultaneous call and data transmission on the VZW network without a hitch.

Can I surf and talk at the same time on a verizon iphone?

I've heard that Verizon iPhones don't allow users to talk and surf at the same time. Is that true? I'm not keen on going to AT&T. If it's true, will it ever change?

Yes. It is true because Verizon runs on CDMA which doesn't allow for surf and talk at the same time. AT&T runs on GSM which allows for surf and talk at the same time.

Surf and Talk at the same time (AT&T Commercials)

So I see all these commercials saying AT&T has the fastest 3G network. I also see the commercials about being able to surf and talk at the same time.
Now I was almost positive that was crap but figured let me test this out again just to be sure. Sure enough, on the Edge network (which might be the issue, might actually work on 3G which is very limited with AT&T it appears), the iPhone won't talk and do surfing at the same time. You get "Cellular data connections are not available during this call" as the message on your screen.
So is this just an issue with the iPhone specific or is this just bad marketing on AT&T's part?

This is possible when connected to AT&T's 3G network, which is not available in most rural areas. I do this often.
http://www.wireless.att.com/coverageviewer/popUp_3g.jsp
Verizon's 3G network has better coverage, but it is fast as AT&T's EDGE network.

Can Iphone5s surf and talk at the same time?

Can Iphone5s surf and talk at the same time?

You can find the answer here:
http://www.iphonehacks.com/2013/09/iphone-5s-iphone-5c-wont-support-simultaneous -voice-data-on-verizon-sprint.html

Tethering and Voice at the same time

Is there a refence to show what models support using tethering and voice at the same time?

I have the same problem with 2 iPhone 4S. When I'm only using data, download speed on 3G is 5.57Mbps, Upload 1.07Mbps and ping 79ms. As soon as I make or receive a phone call those speeds drop to:
Download: 0.27Mbps
Upload: 0.1Mbps
Ping: 638ms
With these speeds the web browser and all the other apps just keep trying to load or log in but nothing happens. As soon as I hang up, the speed goes back to normal. the problem is non existen while on wi-fi.
AT&T triend to make some changes on the settings of my sim but itr didn't help at all. Just this morning I got a call from AT&T to let me know that the data speed is supposed top drop and that they don't make any promises as to the data speed, that their "talk & surf"propaganda only means that if you are using the internet, you can still receive phone calls....***? I never had this problem with the iPhones, 3G, 3Gs, 4. I asked them that I wanted to speak with somebody higher up or an enginner to discuss this issue but I'm still waiting to hear from them.
The guys at apple were a little confused with this problem (I did reset the network settings but problem persisted, then reset all settings...nothing, then hard reset, restored from back up, deleted everything and set it up as new iphone...the problem is still there...) they asked if I could take the phone to the Apple store so they can run some advanced diagnostics...I'll have to take a road trip (closest Apple store is about 100 miles from my hometown)...Going on 1/5/2012....We'll see....

IPad turn on wifi and 3G at the same time

If my iPad turn on the wifi and 3G at the same time, which data will my device use? The wifi or the 3G?

Ie.. At home if your in settings, wifi, connected to your home wifi....3G will not be used. As soon as you leave your house(car etc) 3G takes over until your connected to another wifi hotspot. To keep your data usage down, turn off 3G when you don't want to use it, or limit use by checking for wifi if your going to be in a location for a while.

Headphones and Speakers at the same time on ZS 2

Hiya
I have the Audigy 2 ZS sound card.
I have a set of normal speakers with the one connector and a set of headphones that has 2 connectors, one for the mic and one for the headphone speakers. This is also a USB set so i have that option aswell.
Now i know i can put the headphones in the front panel but i dont really want to do this as my pc would mean have the fron panel open.
My question is, how am i able to use both the headphones and speakers at the same time. At this moment if i plug the USB headphones in they take over and no sound comes out of the speakers.
I would like both if poss
Thx
Paul

You can get a stereo splitter adapter/cable and with it, you can have the headphone and speaker connect to the same output jack from the soundcard.
Jason

IP over Firewire and ethernet at the same time?

Is it possible to use both IP over Firewire and ethernet at the same time?
I want to use my TB hard drive attached to one Mac via Firewire 800 to backup another Mac also attached to the same drive via Firewire 800. I can only mount the drive on one machine at a time so I need to share it out to the other Mac. It works great if I set it up to do strait IP over Firewire, with static IPs, but that means I can't connect to the internet because my ethernet connection on both machines becomes the secondary connection method. Similarly, if ethernet is primary then I can't connect via Firewire. Is there a way to set it up so the Macs will know which method to use depending on the IP address?
I am using 10.5.1 on both machines.
G5, 1.8 GHz, 15.GB RAM
MBP, 2.4 GHz, 4GB RAM
Thanks!

Certainly.
In the network control panel I set Built-in FireWire to the top of the service order list, followed by Built-in Ethernet.
Next, I set Built-in FireWire to Configure Manually with the address 192.168.1.xxx and the Subnet Mask to 255.255.255.xxx, making sure the Subnet Mask is set the same on both machines and that the IP address is different on both machines and different from the Built-in Ethernet addresses.
I applied the settings, turned on Sharing on both machines, then mounted whatever shared drives I needed by connecting to the other machine using the FireWire IP address.
Now I am able to share drives using FireWire 800 - which works great when used with Time Machine - and still use my normal ethernet to surf, etc..

Edit video and audio at the same time

Is it possible when I remove some of the audio to also remove the same amount of that time from the video?

Lilybiri,
We did record both the audio and video at the same time in Captivate 8.
The question is: how do we edit the audio and video at the same time?
If I want to cut out 5 seconds of audio can I or will the software cut out that same portion of the video and if so how do we do it?
Do we need to create a Demo or Software Simulation to be able to take advantage of this tool for cutting both together.
Your assistance is very much appreciated.
<http://www.eaglemetal.com/>
Mark Wyatt Customer Support specialist
Eagle Metal Products | 12300 Ford Road, Suite 110 | Dallas, TX 75234
[email protected]<mailto:[email protected]>
Toll free: 800.521.3245
Direct Line: 972.350.9898

Container resize and paint on the same time needed

Hi all,
I am trying to make a transparent window using screenshots and I am getting a flickering of the image I am drawing on the window.
I think this is happening because setLocation() method moves the window and makes the repaint but with the old graphics on it. When the paint() will be called probably the paint event will be executed after the move event so on the window the two Graphics will be painted. This is what I think that causes the flicker.
If anyone has an ideea of how can I make the move - setLocation() - and paint() in the same time please tell me!
Thanks,
Robert

You cannot do this with a UCM hunt group. CCX cannot play media to the caller after you invoke a Call Redirect or Call Consult Transfer.
You can do this if you configure the target users as contact center agents and use a Select Resource step. If none of the agents are available [ready] to take a call, you can play a welcome prompt or other actions that is interrupted if an agent becomes available. There are two noteworthy caveats to this:
1) You can only offer a call to one contact center user at a time. This would be analogous to a Longest Idle hunt group model.
2) There is a second branch that you will see on this step: Connected. Note that when an agent's phone is ringing, the caller is not in the queued branch of the step. The caller is hearing Network MoH.
This means in practice you will want to put the welcome message before whatever else you want to do with the call and let it complete.

Tak and surf at the same time

Similar Messages

Maybe you are looking for