Take Audio from a Clip

Hi all,
I'm very new to video but I've shot some video of a band and I want to improve the sound in Logic Pro (my comfort zone). How can I strip the audio from the video and save it so I can edit in Logic. The video is HDV
Many thanks
Steve

Export from FCE using QuickTime Conversion (File->Export->QuickTime Conversion). In the export window, select AIFF as the file format at 48khz, 16 bit stereo.
-DH

Similar Messages

  • Extracting audio from video clip to use as narration?

    Hi there,
    I have a video clip in which I want to take the audio of actor speaking and put it onto another video.
    I.e. he is speaking about walking in the park. I want to take him speaking about walking in the park and put it onto the clip where he is actually walking in the park.
    How do I do this in premiere elements 10?

    Hi Bill,
    Thanks for the quick response. I guess my question now is how would I do those two things?
    In terms of exporting the audio, where can I find that option when I'm on timeline?
    What do you mean by "Alt-click" and what is a "muxed file"?
    Thanks again,
    Mallory
    Date: Fri, 13 Jan 2012 19:01:51 -0700
    From: [email protected]
    To: [email protected]
    Subject: Extracting audio from video clip to use as narration?
        Re: Extracting audio from video clip to use as narration?
        created by Bill Hunt in Premiere Elements - View the full discussion
    Welcome to the forum. There are several ways to accomplish this, and your choice might well rest on how you like to work, and what you are doing, such as Deleteing Video. First, you could Export/Share just the Audio as a PCM/WAV @ 48KHz 16-bit, from your Timeline, and Import that into a New Project, where the Audio WAV file would be used. OTOH, you could Atl-click on the Video portion of the muxed file, and Delete the Video, leaving only the Audio portion. Good luck, Hunt
         Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4139273#4139273
         To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4139273#4139273. In the Actions box on the right, click the Stop Email Notifications link.
         Start a new discussion in Premiere Elements by email or at Adobe Forums
      For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

  • Audio from video clip and layering

    ok, I need help! I finally figured out how to take audio from a video clip and place it over pictures or layer it over other audio. Now, I want to start with a video clip, it happens to be an interview, cut away to some pictures or other muted video, and come back to the interview, all with the audio playing the whole time and lined up correctly....how do i do this? THANKS!!

    Thanks David
    I found this here http://www.apple.com/findouthow/movies/#tutorial=extendaudio
    To extend audio across multiple clips:
    1. In the Project area, select the clip that contains the audio you’d like to extend into a second clip. Select the last few seconds of the first clip that contain the audio you want.
    2. To split the first clip, choose Edit > Split Clip.
    3. Control-click the selected clip and choose “Reveal in Event Browser.”
    4. In the Event browser, Command-Shift-drag the clip to extract the audio and place it at the start of the next clip.
    5. Delete the video portion of the clip you split in step 2.
    Because you’ve extracted the audio from exactly the part of the clip you split, the audio seamlessly plays across the next shot
    I am going to try this tonight and see how easy it is

  • How can i leave audio from one clip playing, while showing another one in i

    i am editing a movie, using iMovie 08, and want to use sound for a clip in the video for the end credits. how can i do this?
    just to be clear, i am not trying to add audio. i am trying to leave the audio from ONE CLIP playing, while viewing a new frame. thanks.

    This is simple in iMovie 11 (drag and drop), but in iMovie 08, you can still do it.
    [See this blog post for details|http://imovie08.blogspot.com/2007/08/how-to-extract-audio-from-clip.htm l]

  • How do I use just the audio from a clip in imovie? No picture, no video, just audio!

    I want to put the audio from a clip at the end of the video. No video, just black screen

    It will require a bit of a workaround. But it can be done. If you enable Advanced Tools under the iMovie Preferences (Go to the iMovie Menu > Preferences). Enable Advanced Tools by clicking the checkbox.
    Now create  a title with a black background by dragging at title to the end of the video on the Project timeline. Once the title is there, delete all the text on the title. Now drag that black background directly dead center onto the video clip just before the end where you want to 'blot out' the video and just have audio. When you release the mouse, you will be shown a pop-up menu with a bunch of different options including one titled cut-away. Choose this option. What will happen is the video will cut to the black video background you dragged on top of the video clip. You can set the duration by dragging the left and right edges out further to make it run longer. This black back ground effectively cover the video and will continue to play the audio of the underlying video clip.

  • How do I use just the audio from a clip without the video?

    Can't remember how to use just the audio from a clip, without the video.  FCP X can't select like FCP&

    Edit just the audio into the timline.
    The disclosure triangle next to the edit buttons.

  • Detaching audio from video clips

    Hi
    After trying the standard 'detach audio' button I cant seem to find a way to completley detach audio from a clip in order to hear the track I have added to the clip. All I can seem to do is turn the volume right down, and inturn still able to hear it, which is proving annoying!
    Any ideas would be appreciated!
    Thanks

    Thanks for your reply Geoff,
    I basically have a soundtrack 3.28 minutes long which I want to be the only noise thats playing throughout my interchanging video clips, so I would like to completley move the audio from the all of the indivdual video clips that I am adding in, I thought the 'detatch audio' button would be the one for this, but as I continuously play back bits of the movie to prefect editing I can still slightly hear the sound from the individual videos that I am adding?
    So frustrating, but Im sure thats its something real basic that I am missing.....

  • Extracting audio from many clips at a time

    I have to extract some audio from many many video clips, so I was attempting to do it in one step, but Logic extract only from one clip at a time 
    So I'm thinking to use Audio Converter (it can extract audio from many clips in one step), but it ask me the AIFF encoding Bitrate (among 64 and 192 kbps). So I'm wondering... but Logic which AIFF bitrate manages???
    Tnks

    yes, it is possible. Infact, it is the normal practice to add those 10 roles to that single user in SU01 direclty.
    and as I said, user comparison should be scheduled normally in SAP system landscape to do the things automatically, however not immediately but after some time.
    http://help.sap.com/saphelp_nw04/helpdata/en/52/6714a9439b11d1896f0000e8322d00/content.htm
    If you want user comparison immediately, then you need to do it manually in the role.

  • Audio from video clips

    I tried combining video clips into one movie through imovie, the video was there but not the audio from the clips. What can I do to fix this?

    The conversions played sound in QT, but no sound in the editor... What can I do so I don't lose the audio?
    Open the Event file(s) with the QT Player and check the "Inspector" window to make sure the file, as imported to iMovie '08, still has its audio track in tact. If it does and the missing audio is limited to scrubbing Event files, check the audio switch under the preview window to see if it is off. If no audio is present in normal playback/preview mode, then thumbnails could be bad and you might try re-thumbnailing the events. If the problem is on the project side, try duplicating the project and see if the duplicate has sound. If you still don't have audio, try trimming the duplicate project to a very short sequence and exporting it to see if the output has audio. This assumes you have audio everywhere else and it is not a system wide problem like muting, system sample rate switched to a different setting, system volume turned down, etc...

  • Suggestions for blending audio from one clip to next?

    I'm learning editing and PP and am practicing by editing different clips from a movie to make my own trailer. The problem I'm having is that going from one clip to another has obvious and abrupt changes. I could add audio transitions to each clip, though for a 2.5 minute trailer I'm not sure if fading audio up and down constantly is the best choice? What is the best way to blend the audio from one clip to the next?
    Thanks.

    You can create a crossfade (essentially an
    audio dissolve) from one audio clip to another.
    With the audio track(s) targeted, park the Playhead at the
    audio cut and hit Ctrl+Shift+D (or drag from the effect panel):
    You need to be sure you have sufficient 'handles'
    on both clips to accommodate the crossfade.
    Creating an audio crossfade
    http://tv.adobe.com/watch/learn-premiere-pro-cs6/creating-an-audio-crossfade/

  • How do I put the audio from one clip over the video of another clip?

    So I have two videos, and I want to replace the audio of the first with the audio of the second. Sorry, I'm new to 08 and have been trying to suss this out for ages so I'd really appreciate any advice you guys can give.

    This thread seems to be on the same subject and is very helpful.
    http://discussions.apple.com/thread.jspa?threadID=2072620&tstart=50
    The Working with Audio clip also included the solution for extracting the audio from a clip at the very end of the video. Having to know the secret handshake of shift-command and dragging is really not intuitive, but such is progress....

  • No audio from video clips

    I am only getting audio from the clips when I first start a sequence. When i drag it in the new iteam box in the project window in Premiere pro cc.

    1st, More information needed for someone to help... please click below and provide the requested information
    -Information FAQ http://forums.adobe.com/message/4200840
    2nd, What are you editing?
    Codec & Format information, with 2 links inside to read
    -read both links in reply #1 http://forums.adobe.com/thread/1270588
    Report back with the codec details of your file, use the programs below... A screen shot works well to SHOW people what you are doing
    http://forums.adobe.com/thread/592070?tstart=30
    For PC http://mediainfo.sourceforge.net/en or http://www.headbands.com/gspot/
    For Mac http://mediainspector.massanti.com/

  • How do you overlay the audio from a clip over a iphoto slideshow clip ?

    How do you overlay the audio from a clip over a iphoto slideshow clip ?
    I want the audio from a video clip to be playing over the jpg/slideshow iphoto images ...so you see the slideshow elements but do not see the clip but do here the audio !
    thanks ! HELP!

    How do you overlay the audio from a clip over a iphoto slideshow clip ?
    "Command-Shift-Drag" the Event clip containing the audio you wish to extract and "pin" it to the slideshow already in the Project window.

  • Extracting audio from short clips

    My previous post/question seems to have disappeared so I apologise for a repeat: I'm noticing (and this started happening just recently) that it takes now about 10 minutes to extract audio from even very short clips (10 seconds long, say). It used to be clip-length-dependent, now it's flat 10 minutes no matter how short the clip. It's driving me nuts because it's an enormous slowdown of the workflow.
    Anybody has seen this and knows about a workaround?

    it takes now about 10 minutes to extract audio from even very short clips (10 seconds long, say)
    Is the underlying media clip also 10 seconds? Or is it much larger and just edited down to 10 seconds?
    iMovie HD extracts audio from the WHOLE underlying media clip but displays just the part that is not edited off. So extraxting audio can take time when deailing with such clips.
    Do a test: Export the just the selected 10 second clip as Full Quality DV and import it back (so the media clip really is just 10 seconds). Then extract audio from that 10 second clip. Is it any faster?

  • How do I extract audio from a clip?

    I've tried to select a clip in the timeline then go to clip/audio optins but audio extract is always grey...  I'm trying to pan audio into the next clip.

    No need to extract it to apply fx or mix / pan it.
    I f you want audio only from a clip ...you can drag clip to Source Monitor and then Drag Audio Only from there to Timeline / sequence

Maybe you are looking for

  • OBIEE 11g - Wrong values getting passed in Prompts

    Hi All, I am in 11.1.1.6.0 I have a report, lets say report 1 and following are its properties 1. it has two columns, one dimension (empname) and one fact (revenue) 2. on the revenue column, i have applied an action link which takes me to another das

  • Sales Tax Calc (Line Item level calc versus header level calc)

    Hello, My company utilizes vertex to calculate sales and use tax in our sales orders that are created via resource related billing (DP96). We store tax code O1 using condition type UTXJ for each SD Contract. Condition types XR1 thru XR6 receive the s

  • Some changes to forums and a general update

    I wanted to alert you to a couple of small changes and give you a general update about the site. Since our forums upgrade in June, we've been continuing to make improvements. We're beginning a wave of new features that will be rolling out in the next

  • Default font for mail messages?

    Is it possible to set up a default font for outgoing mail messages, such as Helvetica 12 point bold in dark blue, without having to click on font and color every time I compose an e-mail? Imac G-5   Mac OS X (10.4.3)   Imac G-5   Mac OS X (10.4.3)  

  • Adobe Illustrator CS5 groups problem.

    I work under windows xp using Adobe Illustrator CS5, and the problem is that when I group a certain objects in an illustration and save that illustration as an *.ai file, then send it to a client that uses MAC the groups are getting jumbled up. The c