Take long time for loading

Hi Experts,
One of my data target (Data comming from another ODS) is taking long time for loading, basically it takes below 10 times only, but today it is running from last 40 minesu2026
In Status Tab it showing....
Job termination in source system
Diagnosis
The background job for data selection in the source system has been terminated. It is very likely that a short dump has been logged in the source system
Procedure
Read the job log in the source system. Additional information is displayed here.
To access the job log, use the monitor wizard (step-by-step analysis) or the menu path <LS>Environment -> Job Overview -> In Source System
Error correction:
Follow the instructions in the job log messages.
Can anyone please solve my problem.
Thanks in advance
David

Hi Experts,
Thanks for your answers, and my load failed when the data comes from one ODS to another ODS. find the below job log
Job started
Step 001 started (program SBIE0001, variant &0000000007169, user ID RCREMOTE)
Asynchronous transmission of info IDoc 2 in task 0001 (0 parallel tasks)
DATASOURCE = 8ZPP_OP3
         Current Values for Selected Profile Parameters               *
abap/heap_area_nondia......... 20006838008                             *
abap/heap_area_total.......... 20006838008                             *
abap/heaplimit................ 83886080                                *
zcsa/installed_languages...... ED                                      *
zcsa/system_language.......... E                                       *
ztta/max_memreq_MB............ 2047                                    *
ztta/roll_area................ 5000000                                 *
ztta/roll_extension........... 4294967295                              *
Call customer enhancement EXIT_SAPLRSAP_001 (CMOD) with 100,000 records
Result of customer enhancement: 100,000 records
Asynchronous send of data package 1 in task 0002 (1 parallel tasks)
tRFC: Data Package = 0, TID = , Duration = 00:00:00, ARFCSTATE =
tRFC: Start = 06.09.2010 01:31:55, End = 06.09.2010 01:31:55
Asynchronous transmission of info IDoc 3 in task 0003 (1 parallel tasks)
Call customer enhancement EXIT_SAPLRSAP_001 (CMOD) with 100,000 records
Result of customer enhancement: 100,000 records
Asynchronous send of data package 2 in task 0004 (2 parallel tasks)
tRFC: Data Package = 0, TID = , Duration = 00:00:00, ARFCSTATE =
tRFC: Start = 06.09.2010 01:32:00, End = 06.09.2010 01:32:00
Asynchronous transmission of info IDoc 4 in task 0005 (2 parallel tasks)
Call customer enhancement EXIT_SAPLRSAP_001 (CMOD) with 100,000 records
Result of customer enhancement: 100,000 records
Asynchronous send of data package 3 in task 0006 (3 parallel tasks)
tRFC: Data Package = 0, TID = , Duration = 00:00:00, ARFCSTATE =
tRFC: Start = 06.09.2010 01:32:04, End = 06.09.2010 01:32:04
Asynchronous transmission of info IDoc 5 in task 0007 (3 parallel tasks)
Call customer enhancement EXIT_SAPLRSAP_001 (CMOD) with 100,000 records
Result of customer enhancement: 100,000 records
Asynchronous send of data package 4 in task 0008 (4 parallel tasks)
tRFC: Data Package = 0, TID = , Duration = 00:00:00, ARFCSTATE =
tRFC: Start = 06.09.2010 01:32:08, End = 06.09.2010 01:32:08
Asynchronous transmission of info IDoc 6 in task 0009 (4 parallel tasks)
Call customer enhancement EXIT_SAPLRSAP_001 (CMOD) with 100,000 records
Result of customer enhancement: 100,000 records
Asynchronous send of data package 5 in task 0010 (5 parallel tasks)
tRFC: Data Package = 0, TID = , Duration = 00:00:00, ARFCSTATE =
tRFC: Start = 06.09.2010 01:32:11, End = 06.09.2010 01:32:11
Asynchronous transmission of info IDoc 7 in task 0011 (5 parallel tasks)
Call customer enhancement EXIT_SAPLRSAP_001 (CMOD) with 100,000 records
Asynchronous send of data package 13 in task 0026 (6 parallel tasks)
tRFC: Data Package = 0, TID = , Duration = 00:00:01, ARFCSTATE =
tRFC: Start = 06.09.2010 01:32:44, End = 06.09.2010 01:32:45
tRFC: Data Package = 8, TID = 0AEB465C00AE4C847CEA0070, Duration = 00:00:17,
tRFC: Start = 06.09.2010 01:32:29, End = 06.09.2010 01:32:46
Asynchronous transmission of info IDoc 15 in task 0027 (5 parallel tasks)
Call customer enhancement EXIT_SAPLRSAP_001 (CMOD) with 100,000 records
Result of customer enhancement: 100,000 records
Asynchronous send of data package 14 in task 0028 (6 parallel tasks)
tRFC: Data Package = 0, TID = , Duration = 00:00:00, ARFCSTATE =
tRFC: Start = 06.09.2010 01:32:48, End = 06.09.2010 01:32:48
tRFC: Data Package = 9, TID = 0AEB465C00AE4C847CEF0071, Duration = 00:00:18,
tRFC: Start = 06.09.2010 01:32:33, End = 06.09.2010 01:32:51
Asynchronous transmission of info IDoc 16 in task 0029 (5 parallel tasks)
Call customer enhancement EXIT_SAPLRSAP_001 (CMOD) with 100,000 records
Result of customer enhancement: 100,000 records
Asynchronous send of data package 15 in task 0030 (6 parallel tasks)
tRFC: Data Package = 0, TID = , Duration = 00:00:00, ARFCSTATE =
tRFC: Start = 06.09.2010 01:32:52, End = 06.09.2010 01:32:52
Asynchronous transmission of info IDoc 17 in task 0031 (6 parallel tasks)
Call customer enhancement EXIT_SAPLRSAP_001 (CMOD) with 100,000 records
Result of customer enhancement: 100,000 records
Asynchronous send of data package 16 in task 0032 (7 parallel tasks)
tRFC: Data Package = 10, TID = 0AEB465C00684C847CF30070, Duration = 00:00:18,
tRFC: Start = 06.09.2010 01:32:37, End = 06.09.2010 01:32:55
tRFC: Data Package = 11, TID = 0AEB465C02E14C847CF70083, Duration = 00:00:17,
tRFC: Start = 06.09.2010 01:32:42, End = 06.09.2010 01:32:59
tRFC: Data Package = 0, TID = , Duration = 00:00:00, ARFCSTATE =
tRFC: Start = 06.09.2010 01:32:56, End = 06.09.2010 01:32:56
Asynchronous transmission of info IDoc 18 in task 0033 (5 parallel tasks)
Call customer enhancement EXIT_SAPLRSAP_001 (CMOD) with 100,000 records
Result of customer enhancement: 100,000 records
Asynchronous send of data package 17 in task 0034 (6 parallel tasks)
tRFC: Data Package = 0, TID = , Duration = 00:00:00, ARFCSTATE =
tRFC: Start = 06.09.2010 01:33:00, End = 06.09.2010 01:33:00
tRFC: Data Package = 12, TID = 0AEB465C00AE4C847CFB0072, Duration = 00:00:16,
tRFC: Start = 06.09.2010 01:32:46, End = 06.09.2010 01:33:02
Asynchronous transmission of info IDoc 19 in task 0035 (5 parallel tasks)
Call customer enhancement EXIT_SAPLRSAP_001 (CMOD) with 100,000 records
Result of customer enhancement: 100,000 records
Asynchronous send of data package 18 in task 0036 (6 parallel tasks)
tRFC: Data Package = 0, TID = , Duration = 00:00:00, ARFCSTATE =
tRFC: Start = 06.09.2010 01:33:04, End = 06.09.2010 01:33:04
Asynchronous transmission of info IDoc 20 in task 0037 (6 parallel tasks)
ABAP/4 processor: DBIF_RSQL_SQL_ERROR
Job cancelled
Thanks
Daivd
Edited by: david Rathod on Sep 6, 2010 12:04 PM

Similar Messages

It takes long time to load the parameter's value when running we run report

Hi,
It takes long time to load the parameter's value when running we run report. What could cause this? How to troubleshoot the behavior of the report? Could I use Profile and what events should i select?
Thanks

Hi jori5,
Based on my understanding, after changing the parameter, the report render very slow, right?
In Reporting Service, the total time to generate a report include TimeDataRetreval, TimeProcessing and TimeRendering. To analyze which section take much time, we can check the table Executionlog3 in the ReportServer database. For more information, please
refer to this article:
More tips to improve performance of SSRS reports.
In your scenario, since you mention the query spends less time, the delay might happens during report processing and report rendering section. So you should check Executionlog3 to check which section costs most of time, then you can refer to this article
to optimize your report:
Troubleshooting Reports: Report Performance.
If you have any question, please feel free to ask.
Best regards,
Qiuyun Yu

Takes long time for shutdown after adding to domain

Hi,
Workstation OS - Window 7
Domain Controller OS - Window server 2008 R2 standard
Following thing i have measure with Stopwatch.
1) When the laptop is in workgroup, it takes just 17 second for shutdown.
2) when i added the same laptop in domain ( corp.abc.com ), now it takes 1minutes and 22 second for shutdown. ( it just show shutting down screen )
Why the shutdown time increased so much?
Do you have any idea?
Note:- i have not make any changes in laptop, nor added any software. I have done the above testing because user start complaining that after putting laptop in domain it takes long time for shutdown. It's happening to all laptop where the OS is window 7
There is no logoff scripts / gpo's as well as we don't have roaming profiles.
Please advice.
Thanks & Regards,
Param
www.paramgupta.blogspot.com

Hi,
To troubleshooting this issue, please install Windows Performance Tools (WPT) Kit. The Windows Performance Tools (WPT) Kit contains performance analysis tools, and is designed for analysis of a wide range of performance problems including application start
times, boot issues, deferred procedure calls and interrupt activity (DPCs and ISRs), system responsiveness issues, application resource usage, and interrupt storms.
To get the installer, you have to install the Windows 7 SDK.
Microsoft Windows SDK for Windows 7 and .NET Framework 3.5 SP1
http://www.microsoft.com/en-us/download/details.aspx?id=3138
For shutdown tracing:
Run command:
xbootmgr -trace shutdown -noPrepReboot -traceFlags BASE+CSWITCH+DRIVERS+POWER -resultPath C:\TEMP
Collect logs and post them for further troubleshooting.
For more information please refer to following MS articles:
Long Shutdown Time on Windows 7 Ultimate x64
http://social.technet.microsoft.com/Forums/en/w7itproperf/thread/11a42a93-efd2-4184-9ce8-bbc1438b7ea6
Long shutdown time on Windows 7 64 bit laptop
http://social.technet.microsoft.com/Forums/en-US/w7itproperf/thread/4440fc6e-c81e-440c-9183-9b7e176729d2
Lawrence
TechNet Community Support

HT4759 Hello .. I've been subscribed for ic;oud for 20$ per year and I found it useless for many reasons: that I can not disconnect my mobile while the uploading process and it takes long time for uploading my data .. Its not a reliable system that's why

Hello .. I've been subscribed for ic;oud for 20$ per year and I found it useless for many reasons: that I can not disconnect my mobile while the uploading process and it takes long time for uploading my data .. Its not a reliable system that's why I need to deactivate the space service and take my money back .. Thanks

The "issues" you've raised are nothing to do with the iCloud service.
No service that uploads data allows you to disconnect the device you are uploading from while uploading data. Doing so would prevent the upload from completing. It is a basic requirement for any uploading service that you remain connected to it for uploading to be possible.
The time it takes to upload data to iCloud is entirely dependent on how fast your Internet connection is, and how much data you are uploading. Both of these things are completely out of Apple's control. Whichever upload service you use will be affected by the speed of your Internet connection.

When I use update software from my mobile it take long time for checking update software and no thing happened to update my IOS software

When I use update software from my mobile it take long time for checking update software and no thing happened to update my IOS software

Servers have been swamped. Keep trying and be patient. Wait a few days.

Takes Long time for Data Loading.

Hi All,
Good Morning.. I am new to SDN.
Currently i am using the datasource 0CRM_SRV_PROCESS_H and it contains 225 fields. Currently i am using around 40 fields in my report.
Can i hide the remaining fields in the datasource level itself (TCODE : RSA6)
Currently data loading takes more time to load the data from PSA to ODS (ODS 1).
And also right now i am pulling some data from another ODS(ODS 2)(LookUP). It takes long time to update the data in Active data table of the ODS.
Can you please suggest how to improve the performance of dataloading on this Case.
Thanks & Regards,
Siva.

Hi....
Yes...u can hide..........just Check the hide box for those fields.......R u in BI 7.0 or BW...........whatever ........is the no of records is huge?
If so u can split the records and execute............I mean use the same IP...........just execute it with different selections.........
Check in ST04............is there are any locks or lockwaits..........if so...........Go to SM37 >> Check whether any Long running job is there or not.........then check whether that job is progressing or not............double click on the Job >> From the Job details copy the PID..............go to ST04 .....expand the node............and check whether u r able to find that PID there or not.........
Also check System log in SM21............and shortdumps in ST04........
Now to improve performance...........u can try to increase the virtual memory or servers.........if possiblr........it will increase the number of work process..........since if many jobs run at a time .then there will be no free Work prrocesses to proceed........
Regards,
Debjani......

Captivate project takes long time to load on LMS

So I developed a bunch of Captivate 7 modules for a course I'd been working on for some time. When I finally loaded these up on the LMS, I notice that when the modules are launched, a pop-up window opens with a grey background and just stays like that for up to 3-4 mins. I figured grey, because that's what I had set as the HTML page color in the skin editor. However the actual module contents take really long (3-4 mins) to load up. When I tried running all these modules locally from my computer, the grey screen fades into the splash animation within a second.
I figured that this was either due to a bandwidth issue or the LMS causing problems. So I then had these modules tested from our India and US offices (different internet connecttions, multiple LMSs). Same thing happened, takes up to 3-4 mins to transition from the grey screen to the splash animation (but loads up instantly when run locally). We then tried this on multiple LMSs like SABA, Moodle, and even tried this on SCORM Cloud and the same issue. The modules takes a long time to load up, so I kind of ruled out the LMS/bandwidth being an issue.
I'm speculating here, but what I think is happening is that the SCO is trying to download the entire module (about 10MB) to the users machine before it plays the splash animation -- if that's the case then is there a way to avoid that? I mean I don't want a 200 slide Captivate published project to be downloaded right from clicking the launch button -- it could stream through as the user advances through the module. Also, I've seen some pre-loader and Start/End options but not sure how those work.
Important to note here, the 3-4 min wait time from when the module is launched, is only for the first launch. If I were to close the browser popup (in which the SCO opened), and click launch again from the LMS, it's loads up almost instantly -- so I'm pretty sure something's happening in my Captivate project's loading settings which I can't put my finger on.
Can anyone help me figure out why this is happening and also what are some possible fixes to this. I can assure you that it's not an internet bandwidth issue because we've tested it on multiple internet connections and on several LMSs (even the client's LMS that this was tested on says that the initial load up takes too long).

All the symptoms you quote sure sounds like a bandwidth issue to me.
Obviously when you load a project directly from your hard drive then there's no issue with bandwidth. But if you're pulling down 10 megs from a web server and it takes a while to start then bandwidth is the obvious issue. I agree that 3-4 minutes sounds excessive for a 10 meg file but that depends entirely on how many users are sharing your bandwidth. Try getting your people in these different locations to visit one of those websites that allows you to test your actual bandwidth. It might not be as much as you think.
On another note...What do you have your preloader set to? The default is 100% but you can usually set it to something like 25% without too much trouble. That should cut the start time down appreciably but nothing is going to eliminate it completely because there'll always be some initial lag the first time your learners view the content.

Query takes long time to load

Hello experts,
My users have queries on a MultiProvider. Today, the queries take a long time to load. When they want to put a filter on it, the selection pop-up takes a long time to show the possible selections.
Is there any way to find out what causes the long wait time? And what can I do about it, to optimize it?
Thanks in advance.

Hi Erica,
Please check load on system(how many users are logged in..?)
Please check : [Checklist for Query Performance|http://sapbwneelam.blogspot.com/2007/10/checklist-for-query-performance.html] some tips for query performance.
Hope it Helps
Srini

Gif files takes long time to load..!!

Hi,
I found the gif/jpg files takes long time ( more than 5 or 6 seconds depends on size ) to render on JavaHelp viewer EditorPane.. I am using JDK 1.3 / Win 2000 / 256 MB / 1 GHz Pentium. Also found JVM uses 90% of the system resources while loading the pic files. I have noticed it as a JDK 1.3 bug from another thread.
http://forum.java.sun.com/thread.jsp?forum=42&thread=230409
I would like to know is there any other solution for this, keeping my JDK Version as it is?
Thanks
Reji

I would convert your images to JPegs if possible since they are so much smaller in size and therefore load much quicker. I had exactly the same problem but I sorted it out this way. I know it's a pain and it will probably screw up your view, but it will speed up your load time ten-fold and I don't know of any other work around. sorry...

Form takes long time to load

My web form takes a long time to load for my users. As a result, I'm not getting very much feedback from them. I need to ensure that the speed at which my form is delivered is consistent. Is Adobe experiencing any problems that would lead to this? I also noticed that the back end was really slow yesterday.

Hi,
>>I also noticed that the back end was really slow yesterday
Yes, we had an issue yesterday with FormsCentral, and it is corrected now. We apologize for any inconvenience that this might have caused.
>>My web form takes a long time to load for my users.
Generally, it should not take long to load the form. Will you try to load the form again?
Thanks,
Lucia

Report takes long time for few records

hi frends,
I m facing one problem with my Web based erp application which is developed in .net , in my application when i open the report from my applicaiton , in my temp folder there one file gets created name is "rpt conmgr cache"
bcoz of this for few records also my report takes too much time and opens very slow and it takes long time, and it happens in some of the reports only , other reports are working cool and its not creating any file in temp folder,,, so can u guide me whats this file and what can be the solution for it,
Thanks
Mithun

hi sabhajit,
i have already checked the sql query it is taking less then seconds.
any other steps u want me to check then pls let me know?
thanks mithun

Bex Reports takes long time for filtering

Hi,
We have gone live in last December.And already our inventory cube contains some 15 million records,sales cube contains 12 million records.
Is there any specific limit to number of records.Because while doing filtering in inventory report or sales reports it is taking very long time.
Is there any alternative or we should delete some the data from the cube.
for filtering any value it is taking long time than running the query itself.
Pls help...
Regards,
viren.

Hi Viren,
I hope a cube can perform well even at 100 million records with some performance tunning. So i absolutely doubt why it is taking long time for your cube with just 10-15 million records.
Do a performance analysis and check whether aggregates will be helpful or not.
Check the below link for how to do a performance analysis.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/media/uuid/d9fd84ad-0701-0010-d9a5-ba726caa585d
Hope it helps.
Thx,
Soumya

Adobe form take long time for Check/Send at portal

Hi Experts
We have a form at Portal, which take long time when we click on Check to validate the form, its taking around 3 mins.
where as other forms are not taking this much time. Can anyone help us on this issue.
Thanks
Sajal

Hi Sajal,
did you already contact your basis-guys to trace the performance of the ADS itself?
Sounds to me, that the connection of the portal is not that good and maybe this is one of the problems.
Also check on the interface to the form. what takes the time... the driver-program fetching the data or even the form itself.
Additional to that you should have a look inside the form and see how much scripting is inside. Sometimes there is a lot of unnecessary source inside and out of that, you didn't share the form (if it is a SAP-delivery) I cannot get more in detail with my answer here.
Hope it gives you a clue where to start with your journey.
~Florian
PS: If you use the search with keywords "ADS + trace" you find a lot of useful information.

Takes long time for songs to start playing

I have window 7. I have problems when i try to play a song it takes a long time and it displays on the screen " loading URL". Why does it take so long. I have trie itunes versions 8-10.5. The only itunes that it doesn't happen in is itunes 7. Itunes also freezes up sometimes. Thanks in advance.

Hi,
To troubleshooting this issue, please install Windows Performance Tools (WPT) Kit. The Windows Performance Tools (WPT) Kit contains performance analysis tools, and is designed for analysis of a wide range of performance problems including application start
times, boot issues, deferred procedure calls and interrupt activity (DPCs and ISRs), system responsiveness issues, application resource usage, and interrupt storms.
To get the installer, you have to install the Windows 7 SDK.
Microsoft Windows SDK for Windows 7 and .NET Framework 3.5 SP1
http://www.microsoft.com/en-us/download/details.aspx?id=3138
For shutdown tracing:
Run command:
xbootmgr -trace shutdown -noPrepReboot -traceFlags BASE+CSWITCH+DRIVERS+POWER -resultPath C:\TEMP
Collect logs and post them for further troubleshooting.
For more information please refer to following MS articles:
Long Shutdown Time on Windows 7 Ultimate x64
http://social.technet.microsoft.com/Forums/en/w7itproperf/thread/11a42a93-efd2-4184-9ce8-bbc1438b7ea6
Long shutdown time on Windows 7 64 bit laptop
http://social.technet.microsoft.com/Forums/en-US/w7itproperf/thread/4440fc6e-c81e-440c-9183-9b7e176729d2
Lawrence
TechNet Community Support

DrawImage takes long time for images created with Photoshop

Hello,
I created a simple program to resize images using the drawImage method and it works very well for images except images which have either been created or modified with Photoshop 8.
The main block of my code is
public static BufferedImage scale( BufferedImage image,
                                      int targetWidth, int targetHeight) {
   int type = (image.getTransparency() == Transparency.OPAQUE) ?
                    BufferedImage.TYPE_INT_RGB :
                    BufferedImage.TYPE_INT_RGB;
   BufferedImage ret = (BufferedImage) image;
   BufferedImage temp = new BufferedImage(targetWidth, targetHeight, type);
   Graphics2D g2 = temp.createGraphics();
   g2.setRenderingHint
         RenderingHints.KEY_INTERPOLATION,
         RenderingHints.VALUE_INTERPOLATION_BICUBIC
   g2.drawImage(ret, 0, 0, targetWidth, targetHeight, null);
   g2.dispose();
   ret = temp;
   return ret;
}The program is a little longer, but this is the gist of it.
When I run a jpg through this program (without Photoshop modifications) , I get the following trace results (when I trace each line of the code) telling me how long each step took in milliseconds:
Temp BufferedImage: 16
createGraphics: 78
drawimage: 31
dispose: 0
However, the same image saved in Photoshop (no modifications except saving in Photohop ) gave me the following results:
Temp BufferedImage: 16
createGraphics: 78
drawimage: 27250
dispose: 0
The difference is shocking. It took the drawImage process 27 seconds to resize the file in comparison to 0.78 seconds!
My questions:
1. Why does it take so much longer for the drawImage to process the file when the file is saved in Photoshop?
2. Are there any code improvements which will speed up the image drawing?
Thanks for your help,
-Rogier

You saved the file in PNG format. The default PNGImagReader in core java has a habit of occasionally returning TYPE_CUSTOM buffered images. Photoshop 8 probably saves the png file in such a way that TYPE_CUSTOM pops up more.
And when you draw a TYPE_CUSTOM buffered image onto a graphics context it almost always takes an unbearably long time.
So a quick fix would be to load the file with the Toolkit instead, and then scale that image.
Image img = Toolkit.getDefaultToolkit().createImage(/*the file*/);
new ImageIcon(img);
//send off image to be scaled A more elaborate fix involves specifying your own type of BufferedImage you want the PNGImageReader to use
ImageInputStream in = ImageIO.createImageInputStream(/*file*/);
ImageReader reader = ImageIO.getImageReaders(in).next();
reader.setInput(in,true,true);
ImageTypeSpecifier sourceImageType = reader.getImageTypes(0).next();
ImageReadParam readParam = reader.getDefaultReadParam();
//to implement
configureReadParam(sourceImageType, readParam);
BufferedImage img = reader.read(0,readParam);
//clean up
reader.dispose();
in.close(); The thing that needs to be implemented is the method I called configureReadParam. In this method you would check the color space, color model, and BufferedImage type of the supplied ImageTypeSpecifier and set a new ImageTypeSpecifier if need be. The method would essentially boil down to a series of if statements
1) If the image type specifier already uses a non-custom BufferedImage, then all is well and we don't need to do anything to the readParam
2) If the ColorSpace is gray then we create a new ImageTypeSpecifier based on a TYPE_BYTE_GRAY BufferedImage.
3) If the ColorSpace is gray, but the color model includes alpha, then we need to do the above and also call seSourceBands on the readParam to discard the alpha channel.
3) If the ColorSpace is RGB and the color model includes alpha, then we create a new ImageTypeSpecifier based on an ARGB BufferedImage.
4) If the ColorSpace if RGB and the color model doesn't include alpha, then we create a new ImageTypeSpecifier based on TYPE_3BYTE_BGR
5) If the ColorSpace is not Gray or RGB, then we do nothing to the readParam and ColorConvertOp the resulting image to an RGB image.
If this looks absolutely daunting to you, then go with the Toolkit approach mentioned first.

Take long time for loading

Similar Messages

Maybe you are looking for