Take long time when IAS  startup

Hi,
We have a problem in develope enviornment. IAS takes longer and longer
to finish its startup. We do not know the exact reason but reinstall IAS
will kill this problem. It seems IAS read some info from JNDI or
whatever, which grows over time.
Anybody knows how to solve this problem wothout reinstalling IAS?
Thanks

Hi,
I would like to know the configuration of your system. Next, what is the
version of iAS, next, what is the application that you are running and the
size of your application.
Regards
Raj
default wrote:
Hi,
We have a problem in develope enviornment. IAS takes longer and longer
to finish its startup. We do not know the exact reason but reinstall IAS
will kill this problem. It seems IAS read some info from JNDI or
whatever, which grows over time.
Anybody knows how to solve this problem wothout reinstalling IAS?
Thanks

Similar Messages

  • MIRO take long time when enter invoice for PO with GR-based invoice

    Hi,
    In my client system, system take long time for extracting PO data while booking invoice via. MIRO for the purchase order which have GR-based IV is marked. However system take few second for extracting PO data when enter invoice via. MIRO for the PO which don't have GR-based IV. Please note following point while providing the solution:
    - this problem is exist only for the purchase order related to one company code. However system working perfectly for other company code in the same client. Hence we assuming that some company code level cofiguration is missing.
    - the problem is exist for po with account assignment K.
    - we have one to one mapping for purchase organization to company code to plant.
    Appreciate for you quick respond. Thanks in advance.
    Regards,
    sp sahu

    Hi,
    Please check with FI guy for GL A/c and Cost centers which you are using to create the PO with item category K.
    Still problem permits check with your ABAP person.
    Regards,
    Mohd Ali.

  • SSIS package takes longer time when inserting data into temp tables

    querying records from one  server  and  inserting them into temp tables is taking longer time.
    are there any setting in package which  enhance the performance .

    will local temp table (#temp ) enhance the performance  ..
    If you're planning to use # tables in ssis make sure you read this
    http://consultingblogs.emc.com/jamiethomson/archive/2006/11/19/SSIS_3A00_-Using-temporary-tables.aspx
    Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs

  • EJBUtils.cloneObject(...) takes long time when calling EJB's

    hi,
    using OC4J 10.1.3 in windows XP.
    I have a servlet that calls a local stateless EJB (UserManagerBean) (2.1 version) and the EJB calls a second local stateless EJB (UserPersistorBean). The last one does a JDBC query and the result is returned to the servlet. The servlet call takes about 19.5 seconds (in my PC) to execute. Using a profiler, I have detected that EJBUtils.cloneObject(...) is called two times (one for each EJB) and it takes about 18 seconds (every time the servlet call is done, not only the first time !). The JDBC calls it only takes 1.171 seconds.
    here is the trace call showed in the profiler: (time is breaked down in each call)
    -servlet call time to execute= 19.500
    --UserManager_StatelessSessionBeanWrapper18.searchAll(Query)  time to execute= 19.500
    ----com.evermind.server.ejb.StatelessSessionEJBObject.OC4J_invokeMethod(MethodState, Object[], ThreadState) time to execute= 10.750
    ------com.nte.anthema.security.UserManagerBean.searchAll(Query) time to execute= 10.750
    --------UserPersistor_StatelessSessionBeanWrapper16.searchAll(Query) time to execute= 10.750
    ----------com.evermind.server.ejb.EJBUtils.cloneObject(Object, AbstractEJBHome) time to execute= 9.578 (related with UserPersistorBean)
    ----------com.evermind.server.ejb.StatelessSessionEJBObject.OC4J_invokeMethod(MethodState, Object[], ThreadState) time to execute= 1.171
    -------------com.nte.anthema.security.persistence.UserPersistorBean.searchAll(Query) time to execute= 1.171
    ----com.evermind.server.ejb.EJBUtils.cloneObject(Object, AbstractEJBHome) time to execute= 8.750 (related with UserManagerBean)
    Any idea why EJBUtils.cloneObject is executed every time these EJB are called ? I have other EJB's and EJBUtils.cloneObject(...) is not executed when that EJB's aree called.
    Any help ?
    Thanks !
    pep.

    It's loading the code insight. Since you have such a large number of objects you may want to turn this off.
    sqldeveloper -J-Dsdev.insight=false
    -kris

  • Why does iPhone 4 take long time when finishing syncing?

    I have recently started noticing, after upgrading to 7.0.3 that my iphone doesn't work as well, crashes occur in apps and it's a lot slower to process.
    Then I went to back-up my iphone, to my Macbook Pro, as I always do and have recently done since upgrading to 7.0.3.
    It goes through the first stages of back-up at a regualr speed.
    But when it gets to 'Finishing Sync' .... well, it has been finishing now for over 30mins!
    I have alot of Apps on my phone, but have never had an issue with using them before upgrading.
    Can anyone give me some advice on what I need to do to prevent this or fix the speed of the sync.
    Can I do a partial back-up/sync of importnat things like iCal - when im in a hurry?
    My phone obviously won't back up properely if I eject it before it's finished? Love some assistance if anyone has any ideas.
    Thanks!

    Welcome to our community
    Unless something has gone catastrophically wrong, you should never have to perform the uninstall/reinstall/reapply the patch hokey pokey. So that's just wasted effort. There is a simple way to perform what I call the "Factory Reset".
    I recently described how to do this in the thread linked below:
    Click here to view
    I might question why this is needed at all. Perhaps you are unaware of some things that help you avoid issues with Captivate.
    For example:
    How many slides are in your projects? We normally recommend keeping projects somewhere between 50-65 slides as a rule of thumb guideline for the upper limit.
    Where exactly are your projects residing when you make edits? Frequently we see folks working with projects on a network drive. This is less than optimal and will often cause issues and slowness and project corruption. Work locally off your C drive and periodically copy the project the network server to be backed up.
    Hopefully something here was helpful to you... Rick
    Helpful and Handy Links
    Captivate Wish Form/Bug Reporting Form
    Adobe Certified Captivate Training
    SorcerStone Blog
    Captivate eBooks

  • Adobe form take long time for Check/Send at portal

    Hi Experts
    We have a form at Portal, which take long time when we click on Check to validate the form, its taking around 3 mins.
    where as other forms are not taking this much time. Can anyone help us on this issue.
    Thanks
    Sajal

    Hi Sajal,
    did you already contact your basis-guys to trace the performance of the ADS itself?
    Sounds to me, that the connection of the portal is not that good and maybe this is one of the problems.
    Also check on the interface to the form. what takes the time... the driver-program fetching the data or even the form itself.
    Additional to that you should have a look inside the form and see how much scripting is inside. Sometimes there is a lot of unnecessary source inside and out of that, you didn't share the form (if it is a SAP-delivery) I cannot get more in detail with my answer here.
    Hope it gives you a clue where to start with your journey.
    ~Florian
    PS: If you use the search with keywords "ADS + trace" you find a lot of useful information.

  • It takes long time to load the parameter's value when running we run report

    Hi,
    It takes long time to load the parameter's value when running we run report. What could cause this? How to troubleshoot the behavior of the report? Could I use Profile and what events should i select?
    Thanks

    Hi jori5,
    Based on my understanding, after changing the parameter, the report render very slow, right?
    In Reporting Service, the total time to generate a report include TimeDataRetreval, TimeProcessing and TimeRendering. To analyze which section take much time, we can check the table Executionlog3 in the ReportServer database. For more information, please
    refer to this article:
    More tips to improve performance of SSRS reports.
    In your scenario, since you mention the query spends less time, the delay might happens during report processing and report rendering section. So you should check Executionlog3 to check which section costs most of time, then you can refer to this article
    to optimize your report:
    Troubleshooting Reports: Report Performance.
    If you have any question, please feel free to ask.
    Best regards,
    Qiuyun Yu

  • I have the current Mac Pro the entry level with the default specification and i feel some slow performance when applying after effects on my videos using final cut pro and also rendering a video takes long time ? what upgrades do you guys suggest?

    i have the current Mac Pro the entry level with the default configuration   and i feel lack of  performance when applying after effects on my videos using final cut pro and also rendering a video takes long time ? what upgrades do you guys suggest i could do on my Mac Pro ?

    256GB SSD  it shipped with will run low and one of the things to watch.
    Default memory is 12GB  also something to think about.
    D500 and FCP-X 10.1+
    http://macperformanceguide.com/index_topics.html#MacPro2013Performance
    Five models of 2013 Mac Pro running Resolve, FCPX, After Effects, Photoshop, and Aperture

  • When I use update software from my mobile it take long time for checking update software and no thing happened to update my IOS software

    When I use update software from my mobile it take long time for checking update software and no thing happened to update my IOS software

    Servers have been swamped. Keep trying and be patient. Wait a few days.

  • BPM Process chain takes long time to process

    We have BI7, Netweaver 2004s on Oracle and SUN Solaris
    There is a process chain (BPM) which pulls data from the CRM system into BW. The scheduled time to run this chain is 0034 hrs. This chain should ideally complete before / around 0830 Hrs. <b>Now the problem is that every alternate day this chain behaves normally and gets completed well before 0830 hrs but every alternate day this chain fails…</b> there are almost 40 chains running daily. Some are event triggered (dependent with each other) or some run in parallel. In this, (BPM) process chain, usually there are 5 requests with 3 Delta and 2 full uploads (Master Data). The delta uploads finishes in 30 minutes without any issues with very few record transfers. The first full upload is from 0034 hrs to approximately 0130 hrs and the 2nd upload is from 0130 hrs to 0230 hrs. Now if the 1st upload gets delayed then the people who are initiating these chains, stop the 2nd full upload and continue it after all the process chains are completed. Now this entire BPM process chain sometimes takes 17 -18 hrs to complete!!!!!
    No other loads in CRM or BW when these process chains are running
    CRM has background jobs to push IDOCS to BW which run every 2 minutes which runs successfully
    Yesterday this chain got completed successfully (well within stipulated time) with over 33,00,000 records transferred but sometimes it has failed to transfer even 12,00,000 records!!
    Attaching a zip file, please refer the “21 to 26 Analysis screen shot.doc” from the zip file
    Within the zip file, attaching “Normal timings of daily process chains.xls” – the name explains it….
    Also within the zip file refer “BPM Infoprovider and data source screen shot.doc” please refer this file as the infopackage (page 2) which was used in the process chain is not displayed later on in page number 6 BUT CHAIN GOT SUCESSFULLY COMPLETED
    We have analyzed:--
    1)     The PSA data for BPM process chain for past few days
    2)     The info providers for BPM process chain for past few days
    3)     The ODS entries for BPM process chain for past few days
    4)     The point of failure of BPM process chain for past few days
    5)     The overall performance of all the process chains for past few days
    6)     The number of requests in BW for this process chain
    7)     The load on CRM system for past few days when this process chain ran on BW system
    As per our analysis, there are couple of things which can be fixed in the BW system:--
    1)     The partner agreement (transaction WE20) defined for the partner LS/BP3CLNT475 mentions both message types RSSEND and RSINFO: -- collect IDOCs and pack size = 1 Since the pack size = 1 will generate 1 TRFC call per IDOC, it should be changed to 10 so that less number of TRFCs will be generated thus less overhead for the BW server resulting in the increase in performance
    2)     In the definition of destination for the concerned RFC in BW (SM59), the “Technical Setting” tab says the “Load balancing” option = “No”. We are planning to make it “Yes”
    But we believe that though these changes will bring some increase in performance, this is not the root cause of the abnormal behavior of this chain as this chain runs successfully on every alternate day with approximately the same amount of load in it.
    I was not able to attach the many screen shots or the info which I had gathered during my analysis. Please advice how do I attach these files
    Best Regards,

    Hi,
    Normally  index  creation or deletion can take long time in case  your database statistics are not updated properly, so can check  stat  after your data loading is completed and index generation is done,  Do creation of database statistics.
    Then try to recheck ...
    Regards,
    Satya

  • The Application Takes long time to Start

    Hello All,
    We ar eon Unix->64 Bit-> Essbase 11.1.1.3.
    Problem Description : The application is taking long to start up. around 5 to 6 minutes. This is very first time it is happening.
    There were no specific changes done to the application in the recent releases.
    I have tried all options 1. Compacating outline, 2. Purging the application log etc. all other applications respond good on this host except this. Usually any application should not take more than 1 to 2 minutes to start up.
    There are no specific errors or XCP files recorded in the logs and folders.
    Appreciate your suggestions
    MS

    Thanks Jitendra and Prabhas,
    I know i have posted this thread sometime back and later I had to jump on a New release, so did not get time to check your inputs.
    Well I am back on this issue again. I have been working on various option to get this issues solved " start of App takes long time"
    Here are some Details. We are on SunOs 64 Bit, has 12CU with dual core,  with Essbase 11.1.1.3 running on it. This is an ASO application and has just 7 dimensions, Out of which the ORGANIZATION Dimension is pretty huge with Multiple Hierarchies enabled ( Both Stored and Dynamic ) and has more than 20,00,000 members including the alternate hierarchies ( Shared members)
    I did a smoke test by building dimension by dimension the app was startiung up in just *40* seconds. and when i reached the ORG dimension and added more than 70,000 memebrs . there i fall sick. the app now gets back to its old issue ( Takes more than 10 mainutes to start).
    CPU Usage ranges between 3.1 % to 4 %
    PID USER NLWP PRI NI VSZ RSS S STIME ELAPSED %CPU COMMAND
    4424 user1 1 59 20 1608 1032 S 18:13:33 00:00 0.0 grep COMMAND
    4428 user1 1 59 20 1608 1032 S 18:13:33 00:00 0.0 grep ESS
    4766 user1 88 55 20 6814168 5684200 O 17:37:48 35:45 3.1 /path/xyz/masked/ASO_APP hgfedc NOCREAT.
    But My question here is, in the last moth cube i still similar number of members in the cube and nothing really had changed.
    Essbase GURU's Please give me some Hint to think out of box now.
    Thanks
    MS

  • Report takes long time for few records

    hi frends,
    I m facing one problem with my Web based erp application which is developed in .net , in my application when i open the  report from my applicaiton , in my temp folder there one file gets created name is "rpt conmgr cache"
    bcoz of this for few records also my report takes too much time and opens very slow and it takes long time, and it happens in some of the reports only , other reports are working cool and its not creating any file in temp folder,,, so can u guide me whats this file and what can be the solution for it,
    Thanks
    Mithun

    hi sabhajit,
    i have already checked the sql query it is taking less then seconds.
    any other steps u want me to check then pls let me know?
    thanks mithun

  • MVIEW refresh takes long time

    Materialized view takes long time to refresh but when i tried select & insert into table it's very fast.
    i executed SQL and it takes ust 1min ( total rows is 447 )
    but while i refresh the MVIEW it takes 1.5 hrs ( total rows is 447 )
    MVIEW configration :-
    CREATE MATERIALIZED VIEW EVAL.EVALSEARCH_PRV_LWC
    TABLESPACE EVAL_T_S_01
    NOCACHE
    NOLOGGING
    NOCOMPRESS
    NOPARALLEL
    BUILD DEFERRED
    REFRESH FORCE ON DEMAND
    WITH PRIMARY KEY
    Not sure why so much diffrence

    infant_raj wrote:
    Materialized view takes long time to refresh but when i tried select & insert into table it's very fast.
    i executed SQL and it takes ust 1min ( total rows is 447 )
    but while i refresh the MVIEW it takes 1.5 hrs ( total rows is 447 )A SELECT does a consistent read.
    A MV refresh does that and also writes database data.
    These are not the same thing and cannot be directly compared.
    So instead of pointing at the SELECT execution time and asking why the MV refresh is not as fast, look instead WHAT the refresh is doing and HOW it is doing that.
    Is the execution plan sane? What events are the top ones for the MV refresh? What are the wait states that contributes most to the processing time of the refresh?
    You cannot use the SELECT statement's execution time as a direct comparison metric. The work done by the refresh is more than the work done by the SELECT. You need to determine exactly what work is done by the refresh and whether that work is done in a reasonable time, and how other sessions are impacting the refresh (it could very well be blocked by another session).

  • Database Connectivity takes long time if one of the Node is down .. ??

    Hello All,
    Env: 10.2.0.4 on Solaris 10
    I have 2 nodes.
    When Node1 server is down, it takes long time to connec to the database.
    tnsping would give "OK(2050ms)". Below is the tnsalias.
    RAC_test  =
      (DESCRIPTION =
         (ADDRESS = (PROTOCOL = TCP)(HOST=20.268.169.123)(PORT= 1521))
         (ADDRESS = (PROTOCOL = TCP)(HOST=20.268.169.127)(PORT= 1521))
         (LOAD_BALANCE = yes)
              (CONNECT_DATA =
            (SERVICE_NAME = DK.com)
          (FAILOVER_MODE =
            (TYPE = SELECT)
            (METHOD = BASIC)
            (RETRIES = 180)
            (DELAY = 5)
    )I put the trace on sqlnet.ora and found that first it pings to the "20.268.169.123",
    since the Server is down there will not be any reply and this consumes the delay and
    later it would ping "20.268.169.127" and connect to it.
    If i keep "20.268.169.127" above "20.268.169.123" in tnsalias, and keep "LOAD_BALANCE=no",
    it gets connected very fast, as its directly connecting to Node2. In tnsping i get Ok(40ms).
    How do i reduce the connect timing if i use the first step. Why does it take long time for
    Oracle Client to understand that the Node1 Server is down ?
    TIA,
    J J

    I hope the IP's you are using in the TNS are Virtual IP's.
    You must use Virtual IP's / hostnames for the failover to be quick. If Node 1 is not available then then it's (Node 1's) virtual IP would also get assigned to Node 2 hence all client connections are still able to get a response from the Node Virtual IP address without needing to wait for TCP/IP timeouts. This helps clients to get notified immediately that node 1 is unavailable and the connection tries the 2nd ip/host in the connect descriptor.
    Hope this helps.
    - Siba

  • SSRS 2012. ReportServer takes long time to be up.

    SSRS 2012 Sp1
    Hi guys,
    I am using SSRS as my reporting platform, but I have always got the following issue.
    SSRS ReportServer takes time to load.
    The first time takes long, then less time but only if the ReprotServer web page is continuosly retrived.
    HERE the problem:
    If the ReprotServer page is not used after a short time (let me say 10 min), the page takes long time to be up again.
    I have checked the configuration that is set as for default 12 hours.
    Is there a way to speed up the ReportServer opening page time?
    Thanks for your help 

    Hi Fasttrack2,
    According to your description, you want to optimize the performance of your report. Right?
    In this scenario, when your report page is not active for a short time, it will take long time to render again. This is because the you have the report timeout. You can select "Do not timeout report" in Processing. Please refer to the link below:
    SQL Server Reporting Services – Timeout Settings
    For the performance issue, it can be many reason cause the report running slowly. Please refer to the articles below to optimize the report:
    More tips to improve performance of SSRS reports.
    Reporting Services Performance and Optimization
    Troubleshooting Reports: Report Performance
    If you have any question, please feel free to ask.
    Best Regards,
    Simon Hou

Maybe you are looking for