Take part 1 and part 2 both entries after grn

dear guru's,
i have done migo 101 but not taken excise part1 and so not able to take part 2 also so can u pls teel me how to take part1 and 2 after grn
regards
ujwal

Hi,
Steps to capture excise invoice after GRN
1)Capture the Excise Invoice through J1IEX_C.
2)Update the Part1 through J1I5(if required)
3)Post the excise invoice through J1IEX_P
4)Update registers through J2I5
5)Get the print out by J2I6
regards,
sujit

Similar Messages

Firefox and Internet Explorer both close after 5 minutes of being idle

Both Internet Explorer (11.0.2) and Mozilla Firefox (Mozilla Firefox yahoo! edition yahoo - 1.2.1) close simultaneously after approximately 5-10 minutes of being idle. I've tried reloading both to no avail. I switched to mostly Firefox usage because of it's stability. Any assistance would be greatly appreciated! Thank You in advanced for your time and attention in this matter...[email protected]

Sometimes a problem with Firefox may be a result of malware installed on your computer, that you may not be aware of.
You can try these free programs to scan for malware, which work with your existing antivirus software:
* [http://www.microsoft.com/security/scanner/default.aspx Microsoft Safety Scanner]
* [http://www.malwarebytes.org/products/malwarebytes_free/ MalwareBytes' Anti-Malware]
* [http://support.kaspersky.com/faq/?qid=208283363 TDSSKiller - AntiRootkit Utility]
* [http://www.surfright.nl/en/hitmanpro/ Hitman Pro]
* [http://www.eset.com/us/online-scanner/ ESET Online Scanner]
[http://windows.microsoft.com/MSE Microsoft Security Essentials] is a good permanent antivirus for Windows 7/Vista/XP if you don't already have one.
Further information can be found in the [[Troubleshoot Firefox issues caused by malware]] article.
Did this fix your problems? Please report back to us!

After Effects CC and Premiere CC both crashing after CUDA 5.5.47

Both apps were working fine as of yesterday, and now neither will even startup after the latest CUDA update.
Running Mavericks 10.9.2, as well as the latest updated CC apps.
Please see the attached screenshots. Same things happens every time.
I should also note that reverting back to 5.5.28 fixes the problem immedeately in both After Effects and Premiere.

This morning I tried the update again... starting with this screen:
As you can see, it wants me to update from 5.5.28 (which is working fine right now), to 5.5.47. I then ran the update, so it now looks like this:
So now it's at 5.5.47. Interestingly enought the red "Update Required" text has disappeared. But guess what?? Everything is still crashing again. Have to roll back to 5.5.28, once again!!!

How to take parts of a web page and feed into a PDF template to create a PDF

Interesting quesiton that I think was what LiveCycle was for: How can someone take parts of a web page or xml document (say by id name or a specialized tag) and feed the chosen items into different regions inside a PDF template?
Basically, can you identify areas on a page and then tie them to place holders in a pdf template (with high res graphics say) and create a PDF?
Please note: this is not about converting a whole webpage to a pdf, but select portions of it.
Anyone have experiences in doing this? So far, it appears to require a toolset like LiveCycle or Adlib to utilize only selected items and not the whole page.

The lack of answers is likely due to folks having no clue. What you have asked is not really the purpose of either Acrobat or LiveCycle, but that is not to say it can not be done. A starting point is to bring a WEB page into Acrobat as a PDF. This can be done by printing from the browser to the Adobe PDF printer, using PDF Maker with IE or FIrefox, or simply creating directly in Acrobat. Those are the normal ways to get things from a web page to a PDF.
That said, it is not what you asked. You are asking about being able to parse parts of the web page. That is a lot more work and may not be directly possible, though with JavaScript it might be possible. I suspect that if it is possible you would require a lot of extra programming to allow the material selection. It may be the folks in the SDK sub-forum can help.
Being I have no clue how to implement what you have asked (and probably no one else either), I can only suggest some things to look at or other places to inquire. If you think the XML of LiveCycle would help, then you might try the LiveCycle forum.
In terms of your post, I really don't remember seeing the original, but that was right near the end of the semester and I was not checking the forum very much. There are various reasons folks may not reply, typically because they have no clue. Templates are also somewhat specialized and there are not many posts about them. My guess is that the template aspect may have had a lot of folks skip the post. In any case, I have tried to give you some thoughts.

Is there a script (or plugin) that will take a photo and break it up into parts?

Is there a script or plug-in out there that will take a picture and break it up into various parts (squares for example.) The idea would be that you could automate and rapidly create a photo collage of a single image. (See examples of what I mean in attached pics.)
Thanks!
This image has been resized to fit in the page. Click to enlarge.
You get the idea.

OK, I'm going to edit this post now that I'm at a computer with an actual step by step.
Create a new comp the size of you our final delivered project.
Add a photo to the timeline
Note the size of the photo and the scale to position the photo at it's final resting place
Calculate twice the height and width of the photo and create a new solid that is this size
Place the solid above the photo
Create a mask in the solid at the exact center that is the size shape you want for your photo frame
Either invert the mask or set the mask property to Subtract to reveal a small portion of the photo
Set the solid as a alpha inverted track matte for the photo (you should now see only a portion of the photo
Add a rectangular shape layer with only a stroke to act as the photo frame over the mask. You may have to use two shapes or create a mask on a shape if you want to simulate polaroids
Make the shape layer the parent of the solid you are using as a track matte so the matte will stay lined up with the frame
Here comes the fun, select all layers and duplicate them using Ctrl/Cmnd + D
Immediately hold down Shift + Ctrl/Cmnd + } to move all duplicates to the top
Select the top shape layer and move the shape layer frame into a new position
Pre-compose the top 3 layers
Press the y key to select the Pan Benind or Anchor Point tool and move the pre-comp's anchor point to the center of the top frame
Repeat step 11 through 15 until you have arranged your montage (it might be a good idea to have a template set up as a guide layer so you know where to put the frames
Select all pre-comps and press Alt/Option + P to set a position keyframe for each pre-comp
With all of the keyframe selected move them down the timeline about 3 seconds
Now, with the CTI at the first frame drag each pre-comp into a starting position for that frame
Preview and adjust the timing, then turn on motion blur
Your images will now assemble themselves into the final montage.
There is no script that I know of that will do all of this automatically, but it would not be too hard to write a script that would do the pre-composing if you have a ton of these to do. I'm guessing that with a little practice you could have a new picture frame created and moved into position in less than a minute. It takes me about 30 seconds. That means a 20 frame sequence should take you about a half hour. It might not be worth writing a script unless you have a ton of these to do. Select the bottom three layers and duplicate (Ctrl/Cmnt + D), group them at the top (Shift + Ctrl/Cmnd + } ), move the top frame layer into position, then Shift + Ctrl/Cmnd + C to pre-compose, then move the anchor point of the pre-comp, then do it again.... When you're done set a few keyframes.
As I said, you could write a script, but you'd need a different script to move each frame into position and the script would only work for one layout. If you made a template to put on the bottom so you knew where do place the frames and which order you wanted them you could do this by hand very quickly. The sample project that I'm including which was just quickly thrown together took me less than 10 minutes. Replace my photo with one of yours and you'll get the idea.
Dropbox - photoMontage1_CS6.aep (Note: Dropbox will probably add a .txt extension to the .aep file. Just delete it and you should be able to open the project.

HT1338 hi, my firefox and safari are both having difficulty loading certain parts of web pages. previous to this my firefox would freeze and state that a script was not responding. i would stop the script and reload the page and everything would be fine.

hi, my firefox and safari are both having difficulty loading certain parts of web pages. previous to this my firefox would freeze and state that a script was not responding. i would stop the script and reload the page and everything would be fine. now though the pages just load very very slowly or load leaving out certain pictures and video content. i've tried clearing my cache's and cookies, resetting my browser etc, but it seems like its a system issue as both safari and firefox are having issues. i've run Avast to screen for malware and it came up empty. any suggestions?

10.4.8's been a pain for Networking... not sure of all the reasons though, or whether all the complaints might not be MS working around Bugs/Non-compliance, but at this point I think you should get Applejack...
http://www.versiontracker.com/dyn/moreinfo/macosx/19596
After installing, boot holding down CMD+s, then when the prompt shows, type in...
applejack AUTO
Then let it do all 5 of it's things.
Fixes a lot of problems, and besides, if your Mac ever gets to the point it won't Boot... this is a life saver!
After you run that... let's see where we are.
BTW, several ISPs seem to have trouble with their DNS Servers lately, might try these insead...
208.67.222.222
208.67.220.220

How can i take parts of an attachment/file....and create a "sub" file?

I am trying to reduce the size of an attachment/file. I am wondering how to take parts of one file and create a new (smaller) file?

I think you're using the wrong terminology here. A "folder" on your computer is a folder, not a file (even though it looks like a file folder like in the real world). A "file" on your computer is just that, a singular file be it a Word document, picture file, PDF of something, Excel file, whatever.
That said, if you're trying to email a folder to someone, you can't do that. Email attachments cannot be a folder (i.e. a directory container of multiple files). To separate different files in different folders, you simply drag whatever file you want into whatever folder you want, but you still won't be able to just email the split up folders because it doesn't work like that.
What you need to do if all the files together are too big to send is to first try to zip them all up. Find the folder they're in and select all the files by clicking and dragging a selection square around all of them with your mouse. Once you've done that, right click on one of the selected files making sure you don't accidentally deselect all of them and compress them off the context menu that comes up. The new zip file that's created will contain all the files you just compressed into it. You can then email this one singular zip file and the receiver will just uncompress it and see all the files you have in it. If you have multiple file groups you want to do this with, you can do the same steps for those selections. There's no right or wrong number of files you can zip together, the gotcha is that if your initial issue was that the email attachments were too big, you'll need to figure out what grouping to do to make everything small enough. The Word documents will compress the most since it's just text. The PDFs and picture files the least (if you also have those kinds of files you're dealing with).

How to avoid purchase req and stock transport order to take part in MRP.

Please suggest how to avoid purchase req and stock transport order to take part in MRP.

hi,
check the settings for the MRP type...there you need to show which doc will be taken into considerations...
SPRO >> MM >> CBP...
Under CBP check for the MRP settings where it is placed(check under master data settings)...and check for the indicator for PR's and STO's release orders under tab "Additional external req. in the reorder point planning"..
Regards
Priyanka.P

I am a student and would like to take part of student edition. I'm graduating in June, I will be charged with the full amount of time or for student price for 12 months?

I am a student and would like to take part of student edition. I'm graduating in June, I will be charged with the full amount of time or for student price for 12 months?

Carine17088327 which Student and Teacher edition are you referring to? This forum is primarily regarding perpetual version of Adobe Creative software which included a discount for education users.

I changed my mailto: to yahoo mail but now when I click an email link it has the mailto: and the subject both in the To: part of the email. I have to delete the incorrect data out. How can I fix this?

I changed my mailto: to yahoo mail but now when I click an email link it has the mailto: and the subject both in the To: part of the email. I have to delete the incorrect data out. How can I fix this?

Firefox sent an email to me to confirm that I had asked the above question. The email had a link to click. When I clicked it from Firefox, nothing happened. Then I opened IE, signed into Comcast, opened the email, clicked the link, and it brought me here.

Take part in our Wi-Fi survey and have the chance ...

Hi Everyone
I wanted to let you know about some research that BT is conducting around Wi-Fi that I thought you might be interested in. You have the opportunity to be part of this research and to say thanks for taking part there is the chance to win an iPad 2 or tickets to an Arsenal v Man City football match! For more details about this research and how to take part, read on below...
Thx
Kerry
BT has a rapidly expanding network of over 3 million BT Openzone and BT FON hotspots, offering free unlimited access to BT Total Broadband customers.
To improve the service that BT offers, we want to gain a better understanding of when people are within range of BT’s Wi-Fi coverage.
If you have an Android smartphone then we need your help. We are looking for volunteers to run our survey application on your smartphone for up to four weeks as you go about your normal daily routine. We are hoping for a representative sample of volunteers across the country.
As a thank you for helping us, volunteers who run the application will be entered into a prize draw, with a first prize of an Apple iPad 2, and second prize of a pair of tickets to the Arsenal versus Manchester City game on Saturday 7th April 2012.
Click here to find out more about how to take part and the information we are gathering.
Retired BTCare Community Manager - StephanieG and SeanD are your new Community Managers
If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post.
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

You have to enter the correct password to connect.
Ask the person who setup the router for the password.

Process order should not take part in MRP run

Hello Colleagues
I looking for a way how to exclude not released process orders (we have PP-PI) from MD04 report. Not released process order should not take part in MRP run. I was trying to do it using OPJJ for availability check 02 and checking rule PP but I was not able to get result. Could you please help, probably there are other settings?
Best Regards
Eduard

Hi,
Settings in OPJJ will take effect only when you create or release process orders.
As a work around you can try to exclude process order is
1. Create a Storage location and make it not relevant for MRP-OMIR
2. In Material master for the material in MRP assign storage location MRP as 1 (exclude storage location stock)
3. Create the process order, in the GR tab enter the storage location (not MRP relevant)
In the MRP run it will not take the process order into account.
After releasing change the storage location to the normal sotrage location.
In this process flow, the control is with the storage location.
Check it in your sandbox.
Thanks,
JK

Provide automatic Remark in detail part of journal entry by FMS

I am going to use FMS in journal entry. I want to provide automatic remark base on ref2 in detail part of journal entry . I also provided FMS for ref2 and it's value is base on employee list . I mean there is a look up in ref2 and it retrieves employee's Code. I would like to calculate remark values from ref2 as Employee' name and employee's last name. I donu2019t know how I must write SQL script for this purpose and retrieve employee' Name and last name base on ref2 value in journal detail. I would be grateful if some body help me in this matter.
Thanks

Dear Farhadn,
I am not sure of what information you are trying to add in the UDF. If I understood correctly, you have already a FMS on the field ref2 of the JE that shows name and surname of the employee. According to this data, a value will show up in the other FMS.
Can I ask you where this value comes from? Is it a calculation?
I have to warn you that if you want this value to appear before the JE is added in the system I am afraid what you are asking it is not possible.
The FMS can work if there is a value in the field ref2 in the table, but this value is stored in the table when the user clicks update on the JE. Until then, the FMS will not have the name of the employee.
Kind Regards,
Marcella Rivi
SAP Business One Forums Team

I want to take part of an image in a photo

I am wanting to take part of an image in a photo & put it on part of an image on another photo.
How do I do this?

Layering and masking.
Here's a video tutorial that can help understanding:
Masking Basics in Photoshop CS5 | Adobe Evangelists - Russell Brown | Adobe TV
-Noel

Can a user take part in video conference via mobiles e.g. smart phone, etc?

Hello Community
Using Lync Server can a user start or take part in a Lync Server video conference
via mobile devices like their smart phones, etc just as if they were sitting at their desks
taking part in the Video Conference?
Thank you

Hi Shabeaut
You can use Lync 2013 mobile clients which provide enhanced presence, IM, Lync meetings, and voice
and video calls over the Internet .
Check under category "Conferencing Support in Lync Mobile clients" to get all capabilities and features available for
Lync client
https://technet.microsoft.com/en-us/library/hh691004.aspx
Please mark it as answer if it helps you solving your problem.
Amit Kotha

Take part 1 and part 2 both entries after grn

Similar Messages

Maybe you are looking for