Take picture with iPhone but it does not display it
I take pictures with iPhone but it does not display it
Take a picture. Tap on the thumbnail at the bottom left (portrait) or bottom right (landscape) of the screen to display it and access the rest of the camera roll. Why is everybody complicating this?
Similar Messages
-
I downloaded ios7 to my ipad and iphone. When I take pictures with my iphone - it does not appear on my ipad and imac computer on the photo stream. All of my settings are corret and the icloud is set ok. Does anyone else have this problem?
Read this
http://support.apple.com/kb/TS3989 -
Songs Located on iPhone but iTunes does not display it.
This is a really weird situation.
I tried to sync Smodcast episodes on my iPhone with iTunes. They wouldn't transfer over so I went into the iTunes folder manually found the files of the podcasts and added them to my library as music files. I then synced them to my iPhone and left for work. When I got to work I went to go play the podcast and wasn't showing up on my iPhone and was the only audio I had on my phone. I checked my storage space and says there is audio on my phone and it's taking up space.
I went home that night annoyed and tried plugging in my phone into my Alpine headunit. I searched for music on it and sure enough I was able to select the podcasts as audio music rather than an actual podcast. I plugged the phone into the computer when I got home and iTunes was saying there was no music on my phone but checking the capacity used/free also displayed there was audio on the phone.
How can I delete this audio without restoring the phone?Just found the following info regarding non installation of iphone driver, do you know how I can get the correct driver reinstalled or updated
I have saved a copy of the report as a Pdf File but dont know how to attach it to this message do you have an email address I can send it to????? -
just got an iphone 4 from my dad and its his old iphone and i was gonna delete his account so i can put my account on the iphone but he does not remember the password so I couldnt delete it. I need help deleting it without a password.
If the iPad has Activation Lock - that is, it's asking for the previous owner's Apple ID and password to activate the device or to turn off Find My iPhone - then you will need that information. There's no way around it If your father can't remember the password, he'll need to recover it.
http://iforgot.apple.com
If he can't do it via that page, then he'll have to call Apple Support and ask to speak with Account Security.
If that's not the "password" you meant, please post back and clarify.
Regards. -
hi! I am having a problem with my dictation. It works fine with Greek but it does not work at all with English. Anyone knows why?
Have you changed the system voice to an English one in system preferences?
-
How does one do a two way contacts sync between an iphone and outlook? Most of the community has answered as this to be "always so", but it does not work! Changes made on outlook get done in my iPhone, but it does not work the other way around!
Close the tab the web page is loaded in (command - W).
-
I delete an email on my iphone but it does not delete the same email on my laptop. Any suggestions to help?
Yes, There are actually 4 calendars listed under my iCloud account. The listing on my iPhone is exactly like the listing on my iPad. The iPad is updating but not the iPhone. It's odd because the iPhone did work at one time so I'm assuming it some setting I've changed. I have checked and double checked that the settings on both devices are the same. Do you have any other ideas?
Thanks for your help. -
I cannot install app from my pc. I bought new 4s today and i want to install apps to my iphone. but it does not sync.
You are aware that you can only sync apps using iTunes and that the apps must be from Apple app store?
What did you install in the Phone Shop? -
I have not been able to sync my iPhone 5s on my PC sincethe most recent update to iTunes. My computer showsthe iPhone as connected, but iTunes does not recognize it. I tried the trouble shooter and got device not recognized. I clicked the help button beside the failed test and get iPod instructions. How do I get iPod instructions for work for an iPhone? Better, how can I get this to show iPhone instructions? (On my other computer, I had to uninstall every Apple product to get the new iTunes to work.)
You wrote: (On my other computer, I had to uninstall every Apple product to get the new iTunes to work.)
You may have to do this on this computer as well. http://support.apple.com/kb/ts5376 -
Flash chart with dynamic sql query does not display
Hi,
In my schema SIVOA I have a lot of tables declared like this :
CREATE TABLE "SIVOA"."EVV_xxxx"
( "CLEF_VAR" NUMBER(4,0),
"DATE1" DATE,
"VALEUR" NUMBER(16,8) Only the last part of the name changes "xxxx". For example E009, E019, etc....
I am making a chart page with report and want the user to select a name of a table and I will display using dynamic sql query, the table report and chart.
P184_ENAME is a select list returning the last part of the name of the table, fro example 'E009', 'E019', etc.
P8_CLEF_VAR is an item containing a value. This value is a key retrieved like this :SELECT CLEF_VAR
FROM SIVOA.SITE_ECHELLE
WHERE SITE = :P184_ENAMEI built a classic report using a sql dynamic function :DECLARE
x VARCHAR2 (4000);
BEGIN
x := 'SELECT NULL, DATE1, VALEUR FROM SIVOA.EVV_'
|| UPPER(:p184_ename)
|| ' WHERE CLEF_VAR = :p8_clef_var' ;
RETURN (x);
END;:p8_clef_var is an itme containing the value '4544'.
This works perfectly fine !
When I use this sql fucytion into a flash chart it does not work. I get this message "No data found".
I do not understand why a the report get a result and not the chart !
But if i hard-code the number of the CLEF_VAR instead of fetching it from :p8_clef_var I get a nice chart ! Go figure !DECLARE
x VARCHAR2 (4000);
BEGIN
x := 'SELECT NULL, DATE1, VALEUR FROM SIVOA.EVV_'
|| UPPER(:p184_ename)
|| ' WHERE CLEF_VAR = 4544 ' ;
RETURN (x);
I cannot stay with the key (CLEF_VAR) hard-coded unformtunately !
My question is how to get the chart displaying properly ??
Thank you for your kind answers.
ChristianAlex,
Using your request, with the classic report I get results (data), but I get the same message with the Flash chart : "No data found" ! I don't know how to investigate this. i tried many things but nothing works.
Christian
PS I tried this :
DECLARE
X VARCHAR2 (4000);
BEGIN
x := 'SELECT NULL, DATE1, ROUND(VALEUR,2) FROM SIVOA.EVV_'
|| UPPER (:p184_ename) ||
' WHERE CLEF_VAR = '
|| :p8_clef_var ||
' AND DATE1 BETWEEN TO_DATE ('''
||:P8_DATE_DEBUT||''', ''DD/MM/YYYY HH24:MI'') AND TO_DATE ('''
||:P8_DATE_FIN||''', ''DD/MM/YYYY HH24:MI'')'
RETURN (X);
END; But it does not work either. I could find that the SLQ syntax generated is good becaus I put it into an item which display the return done by the pls/sql.
What is sttange also with the classic report is that if I do click on next or previous to see another rows, I get the message "No data found". If I try to export the report I get an excel file with "No data fouid".
Does anybody already tried my "need" here ? i find strange thant I should not be the firs one trying to get a report an tables which name would be "dynamic".
Tahnk you.
Edited by: Christian from France on Feb 13, 2009 3:05 AM -
I am using icloud and family share but when I receive an email with a *.ics calendar file and add it to my calendar on one of my devices it does not show on the calendar of the other devices. Same happens if I e.g. add my flight details to my calendar via the KLM app. The details show in the calendar of the device where I did it, but not in the others.
But if I add a new calendar entry on one of my devices it immediately shows on all my other devices.If you are talking Photostream remember that Photostream does not transfer existing photos on your device it only transfers new photos added to the camera Roll by taking or saving them. Also note that photos aren't added to Photostream until after the Camera app is no longer in use. Furthermore Photostream is not a backup media. It only saves up to 1000 photos and only for 30 days.
If you are talking about camera roll photos saved in an iCloud backup then there is no way to view these. They are for backup purposes only. -
Query works with indexs but view does not
Hi,
I am using the following query:
SQL> select t.xml_msg_text
2 from xml_tbl t
3 where xmlexists (
4 'declare namespace ns1 = "Abc:SET"; fn:collection("oradb:/DEV/TABLE1")/ROW[ID1=$d/main/ns1:id]'
5 passing t.xml_msg_text as "d"
6 );
It gets executed very fast as it uses the underlying XMLType indexes.
But if I create a view usign this query. And then Select * from View_Name. It does not use the indexes and takes forever to execute.
Any suggestions please.
Thanks..Actually I can't create the Explain Plan for this in SqlPlus:
In the following query:
select t.xml_msg_text
from xml_tbl t
where xmlexists (
'declare namespace ns1 = "Abc:SET"; fn:collection("oradb:/DEV/TABLE1")/ROW[ID1=$d/main/ns1:id]'
passing t.xml_msg_text as "d"
WHEREAS
I can create the Explain Plan for
select t.xml_msg_text
from xml_tbl t
- There is XQuery Code
- And TABLE1 is in another schema but I have created the synonym and given the proper rights. That's why I can execute the query but can't see the plan in SQL Plus.
Please suggest.
Thanks.. -
I take picture i tether but it´s not show up in aperture
I take a picture in tether but the picture It´s no showing up i aperture
The picture land in the folder i c
-
trying to update my iphone 5
my computer sees the device, my itunes account does not?
trouble shooting via itunes was for ipods onlyTry Andrei Cerbu's post here or see TS1538: iOS: Device not recognized in iTunes for Windows, in particular section 5, forcing a driver update.
tt2 -
I delete email from my iphone but it does not delete from my pc
i hv an iphone 4 and i can delete emails from my iphone but its still on my pc. its more time consuming how can i delete it from my iphone and it also deletes from my pc?
if the mail provider use imap or exchanged based mail system then yes
if they use old pop3 then no thats not supported
Maybe you are looking for
-
I accidently replaced a file with another. Can I undo my action? I had two files named graphics. One was on my desktop and another was within another file called solitarie. I move the one on my desktop (wrong file) into the solitarie file and was
-
Beige G3 Tower no longer boots
Hi, I took a look through this forum and found a few people with the same problem, but unfortunately their solution didn't work for me. I was wondering if anyone could help. I have a Beige G3 266Mhz PowerMac that no longer wants to boot. No post, no
-
Bought Ipod to replace stolen Ipod
Hi, I've just bought an Ipod 60gb off Ebay to replace a 20gb Ipod I had stolen. I had my original Ipod in the manual setting.I have over 2000 songs on my computer. When I connected the new Ipod to my computer,it said something like update or restore.
-
Hi, Am making a short movie which consists mostly of photos but with some short videos intercut. I am also synching to a pre-recorded track. The whole movie plays perfectly until later in, about 2 minutes in, but then some photos play with a short je
-
Some script logic commands not supported any longer
Hello, it seems like Prior, *APP(in runallocation), *Name in runallocation...these commands are no longer supported in MS 7.5. I ran the same script logic under MS 5.1 it passes validation in script logic. but in 7.5 it gives error. please advise. th