Takes a long time to find and connect to wireless

I've had this problem for a long time and have done extensive research. On this Thinkpad Edge bought from Office Depot a few years ago, every time the laptop wakes up from Sleep, it takes one and half to two minutes to find the wireless signal. No other devices in the house have this problem. I've turned off all kinds of power saving features to no avail. Any advice is appreciated.

ldcorn wrote:
My computer also has been taking a long time to find a wireless network, up to several minutes. I often have to have it "scan" for networks several times before it finally picks it up. Is there a solution? This has been going on for many months. Other computers (PCs, iPhone) pick up the signals within a few seconds, but my Powerbook takes several minutes, even over 5 minutes sometimes.
See how many networks are listed in Sys Prefs: Network: Advance. Drag the preferred to the top. Delete any you don't really need.
Message was edited by: tjk

Similar Messages

Why does my signal drops and takes a long time to search and connect when I turn on or off my cellular data? And normal text messages are not getting delivered properly. It shows sent but later it will show try again, Is it just me?

I do not know what the problem is, but after the latest update it is really hard to send text messages. It is taking alot of time to send the messages, it is not the problem with the carrier because sending text messages with the same number in the same area is really easy on my normal nokia 1100. Please suggest me what I should check. Second problem I am facing is the carrier signal drops to nothing when I turn on the cellular data. It has to then search for the network and connect again the same happens when I turn the data off again. Please tell a solution. I do not think it is the problem with the hardware because the phone is hardly 2weeks old and everything was working properly with ios 6. It initaly had problem with the battery on updating to ios7 but that was rectified with the new update but again these are the new issues am facing.

This may sound stupid, but I'm gonna throw it out there anyway. Is it possible, that if I have enough junk on my desktop it might disrupt the signal? It seems odd, but it kind of looks like my signal is strong and relatively steady now that I've cleaned my desktop. I do tend to get very cluttered. I use a lot of reference images and save text clippings to use later... it just piles up very quickly.
So, I wonder if all that extra effort my system has to do keeping up with the junk might have something to do with the drop outs?

I have a ipad 1. I seem to be having a lot of connectivity issues. It takes a long time to load and sometimes will not load a page at all. I seem to be having issues with streaming in that it will play a song and just stop.

I seem to be having a lot of connectivity issues my iPad. It takes a long time to load and sometimes will not load a page at all. I seem to be having issues with streaming in that it will play a song and just stop. It seems I have to turn it completely off and restart.
Anyone had these issues?

Settings > General > Reset > Reset network settings

Problem description: My macbook pro since this afteon has been slower, every application I open, it takes a long time to open, and shows the spinning beach ball for a while before it opens or performs some task, or responds to a click- EtreCheck

My computer
Problem description:
My macbook pro since this afternoon has been slower, every application I open, it takes a long time to open, and shows the spinning beach ball for a while before it opens or performs some task, or responds to a click…
EtreCheck version: 2.1.8 (121)
Report generated 31 de março de 2015 18:29:15 BRT
Download EtreCheck from http://etresoft.com/etrecheck
Click the [Click for support] links for help with non-Apple products.
Click the [Click for details] links for more information about that line.
Hardware Information: ℹ️
    MacBook Pro (13-inch, Early 2011) (Technical Specifications)
    MacBook Pro - model: MacBookPro8,1
    1 2.3 GHz Intel Core i5 CPU: 2-core
    16 GB RAM Upgradeable
        BANK 0/DIMM0
            8 GB DDR3 1333 MHz ok
        BANK 1/DIMM0
            8 GB DDR3 1333 MHz ok
    Bluetooth: Old - Handoff/Airdrop2 not supported
    Wireless: en1: 802.11 a/b/g/n
    Battery Health: Normal - Cycle count 250
Video Information: ℹ️
    Intel HD Graphics 3000 - VRAM: 512 MB
        Color LCD 1280 x 800
System Software: ℹ️
    OS X 10.10.2 (14C1514) - Time since boot: 0:25:47
Disk Information: ℹ️
    Hitachi HTS545032B9A302 disk0 : (320,07 GB)
        EFI (disk0s1) <not mounted> : 210 MB
        Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
        Macintosh HD (disk1) / : 318.84 GB (47.94 GB free) - 51 errors
            Core Storage: disk0s2 319.21 GB Online
    MATSHITADVD-R   UJ-898
USB Information: ℹ️
    Apple Inc. Apple Internal Keyboard / Trackpad
    Apple Inc. BRCM2070 Hub
        Apple Inc. Bluetooth USB Host Controller
    Apple Inc. FaceTime HD Camera (Built-in)
    Apple Computer, Inc. IR Receiver
Thunderbolt Information: ℹ️
    Apple Inc. thunderbolt_bus
Gatekeeper: ℹ️
    Mac App Store and identified developers
Launch Agents: ℹ️
    [not loaded]    com.adobe.AAM.Updater-1.0.plist [Click for support]
    [loaded]    com.oracle.java.Java-Updater.plist [Click for support]
    [running]    com.trusteer.rapport.rapportd.plist [Click for support]
Launch Daemons: ℹ️
    [loaded]    com.adobe.fpsaud.plist [Click for support]
    [loaded]    com.adobe.SwitchBoard.plist [Click for support]
    [loaded]    com.microsoft.office.licensing.helper.plist [Click for support]
    [loaded]    com.oracle.java.Helper-Tool.plist [Click for support]
    [loaded]    com.oracle.java.JavaUpdateHelper.plist [Click for support]
    [running]    com.trusteer.rooks.rooksd.plist [Click for support]
User Launch Agents: ℹ️
    [loaded]    com.adobe.AAM.Updater-1.0.plist [Click for support]
    [loaded]    com.adobe.ARM.[...].plist [Click for support]
    [loaded]    com.google.keystone.agent.plist [Click for support]
    [running]    com.spotify.webhelper.plist [Click for support]
User Login Items: ℹ️
    iTunesHelper    UNKNOWN Hidden (missing value)
    AdobeResourceSynchronizer    Application Hidden (/Applications/Adobe Reader.app/Contents/Support/AdobeResourceSynchronizer.app)
    Stickies    Application (/Applications/Stickies.app)
Internet Plug-ins: ℹ️
    JavaAppletPlugin: Version: Java 8 Update 31 Check version
    FlashPlayer-10.6: Version: 17.0.0.134 - SDK 10.6 [Click for support]
    Default Browser: Version: 600 - SDK 10.10
    AdobePDFViewerNPAPI: Version: 10.1.13 [Click for support]
    AdobePDFViewer: Version: 10.1.13 [Click for support]
    Flash Player: Version: 17.0.0.134 - SDK 10.6 [Click for support]
    QuickTime Plugin: Version: 7.7.3
    SharePointBrowserPlugin: Version: 14.4.8 - SDK 10.6 [Click for support]
    Google Earth Web Plug-in: Version: 7.1 [Click for support]
    Silverlight: Version: 5.1.30514.0 - SDK 10.6 [Click for support]
    iPhotoPhotocast: Version: 7.0 - SDK 10.8
User internet Plug-ins: ℹ️
    npsf_cef: Version: sf 3.3.1.1 [Click for support]
    Google Earth Web Plug-in: Version: Unknown
Safari Extensions: ℹ️
    DivX HiQ
    DivX Plus Web Player HTML5 <video>
3rd Party Preference Panes: ℹ️
    Flash Player [Click for support]
    Java [Click for support]
    MacFUSE [Click for support]
    Perian [Click for support]
    Trusteer Endpoint Protection [Click for support]
Time Machine: ℹ️
    Skip System Files: NO
    Auto backup: YES
    Volumes being backed up:
        Macintosh HD: Disk size: 318.84 GB Disk used: 270.90 GB
    Destinations:
        Time Machine Backups [Local]
        Total size: 999.86 GB
        Total number of backups: 60
        Oldest backup: 2012-07-15 01:16:54 +0000
        Last backup: 2015-03-29 19:28:06 +0000
        Size of backup disk: Excellent
            Backup size 999.86 GB > (Disk size 318.84 GB X 3)
Top Processes by CPU: ℹ️
        97%    rapportd
         3%    WindowServer
         1%    mds
         0%    fseventsd
         0%    distnoted
Top Processes by Memory: ℹ️
    155 MB    Safari
    120 MB    Finder
    86 MB    rapportd
    86 MB    WindowServer
    69 MB    mds_stores
Virtual Memory Information: ℹ️
    12.56 GB    Free RAM
    2.53 GB    Active RAM
    428 MB    Inactive RAM
    1.66 GB    Wired RAM
    1.04 GB    Page-ins
    0 B    Page-outs
Diagnostics Information: ℹ️
    Mar 31, 2015, 06:00:15 PM    Self test - passed
    Mar 31, 2015, 01:13:05 PM    /Users/[redacted]/Library/Logs/DiagnosticReports/Microsoft Error Reporting_2015-03-31-131305_[redacted].crash
    Mar 31, 2015, 01:05:42 PM    /Users/[redacted]/Library/Logs/DiagnosticReports/Microsoft Error Reporting_2015-03-31-130542_[redacted].crash
    Mar 31, 2015, 12:24:33 PM    /Users/[redacted]/Library/Logs/DiagnosticReports/Microsoft Error Reporting_2015-03-31-122433_[redacted].crash
    Mar 30, 2015, 05:45:38 PM    /Library/Logs/DiagnosticReports/Skype_2015-03-30-174538_[redacted].cpu_resource .diag [Click for details]
    Mar 30, 2015, 01:52:07 PM    /Users/[redacted]/Library/Logs/DiagnosticReports/Last.fm Scrobbler_2015-03-30-135207_[redacted].crash
    Mar 29, 2015, 05:55:05 PM    /Users/[redacted]/Library/Logs/DiagnosticReports/com.apple.WebKit.WebContent_20 15-03-29-175505_[redacted].crash
    Mar 29, 2015, 01:06:38 PM    /Library/Logs/DiagnosticReports/VLC_2015-03-29-130638_[redacted].hang
    Mar 29, 2015, 01:02:47 PM    /Library/Logs/DiagnosticReports/VLC_2015-03-29-130247_[redacted].hang

Open Activity Monitor and kill this process - rapportd.
Reinstalling OS X Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Reinstalling OS X Without Erasing the Drive
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility and press the Continue button. After Disk Utility loads select the Macintosh HD entry from the the left side list. Click on the First Aid tab, then click on the Repair Disk button. If Disk Utility reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit Disk Utility and return to the main menu.
Reinstall OS X: Select Reinstall OS X and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
Alternatively, see:
Reinstall OS X Without Erasing the Drive
Choose the version you have installed now:
OS X Yosemite- Reinstall OS X
OS X Mavericks- Reinstall OS X
OS X Mountain Lion- Reinstall OS X
OS X Lion- Reinstall Mac OS X
     Note: You will need an active Internet connection. I suggest using Ethernet
                 if possible because it is three times faster than wireless.

New LUN Takes A long Time To Format and Errors Out

Good afternoon,<o:p></o:p>
I have a Hyper-V Cluster composed of 4 nodes and these nodes are able to access multiple CSVs (14 in total). I recently requested a new LUN (LUN 15)to be provisioned
to my Hyper-V cluster in the size of 500GB. Here is my problem:<o:p></o:p>
1. Formatting of a 500GB LUN (with quick format selected) should not take more than a few seconds. Instead, the quick format takes about 2hrs if not longer. I have actually
seen it go for half the day.<o:p></o:p>
2. Once the formatting has completed (no errors), taking the formatted LUN offline freezes the Computer Management screen and shows the status (Not Responding). This
will take place for 30 minutes or less and show that the LUN has been taken offline.<o:p></o:p>
3. In the Failover Cluster Manager, detecting the disks takes about 15 minutes. Once the available LUNs have been detected I can add the 500GB LUN to the Disks screen
without any problems.<o:p></o:p>
4. While in the Disks screen, adding the LUN to the Clustered Shared Volumes takes about 5 minutes (too long).<o:p></o:p>
Already seeing that there is a problem, I went ahead and used the Hyper-V Manager to create a 200GB vhd on the new LUN which has been added to the CSV. The bar indicating
the progress of the vhd creation does not display any progress (no green progress bar appears, not even a tiny bit of it) and after 3 hours (more or less) I receive an error, stating that the creation of the vhd failed.
<o:p>NOTE: The vhd shows up in Volume 9 (LUN 15) but I can only bet that it will not work, plus I would not want to work with a vhd file which failed during the
creation process.</o:p>
<o:p>Long story short, I repeated the above steps to see if that was a temporary problem, but it is not. The same problem occurs no matter which Hyper-V cluster
node the operations are performed on. I would like to add, that I tested the creation of a vhd on an already configured LUN and the creation was completed successfully, and within a n expected time frame.</o:p>
NOTE: When LUN 15 errors out, it's status shows "Failed" in the Failover Cluster Manager. This in turn, causes the re-scanning of available disks to take forever (in Computer Management) and it keeps searching. Pretty
much, the fail of one LUN affects the entire functionality of the entire Hyper-V Cluster.
Errors Listed In Event Details For LUN 15:
1. Cluster Shared Volume 'Volume9' ('Cluster Disk 5') is no longer accessible from this cluster node because of error 'ERROR_TIMEOUT(1460)'. Please troubleshoot this node's connectivity to the storage device and
network connectivity.
Event ID: 5142; Source: Microsoft-Windows Failover Clustering;Task Category: Cluster Shared Volume
2. Cluster Shared Volume 'Volume9' ('Cluster Disk 5') is no longer available on this node because of 'STATUS_IO_TIMEOUT(c00000b5)'. All I/O will temporarily be queued until a path to the volume is reestablished.
Event ID: 5120; Source: Microsoft-Windows Failover Clustering;Task Category: Cluster Shared Volume
3.Cluster resource 'Cluster Disk 5' of type 'Physical Disk' in clustered role '4530acc9-8552-4696-b6c3-636ff8d58c46' failed.
Based on the failure policies for the resource and role, the cluster service may try to bring the resource online on this node or move the group to another node of the cluster and then restart it. Check the resource and group state using Failover
Cluster Manager or the Get-ClusterResource Windows PowerShell cmdlet.
Event ID: 1069; Source: Microsoft-Windows Failover Clustering;Task Category: Resource Control Manager
4.
Cluster resource 'Cluster Disk 5' (resource type 'Physical Disk', DLL 'clusres.dll') did not respond to a request in a timely fashion. Cluster health detection will attempt to automatically recover by terminating the Resource Hosting Subsystem (RHS)
process running this resource. This may affect other resources hosted in the same RHS process. The resources will then be restarted.
The suspect resource 'Cluster Disk 5' will be marked to run in an isolated RHS process to avoid impacting multiple resources in the event that this resource failure occurs again. Please ensure services, applications, or underlying infrastructure
(such as storage or networking) associated with the suspect resource is functioning properly.
Event ID: 1230; Source: Microsoft-Windows FailoverClustering;Task Category: Resource Control Manager
Any and all help will be appreciated!

Hi AquilaXXIII,
What server edition you are using? If you are using 2012r2 as cluster node, please install Recommended hotfixes and updates for Windows Server 2012 R2-based failover clusters
update first,
Recommended hotfixes and updates for Windows Server 2012 R2-based failover clusters
http://social.technet.microsoft.com/Forums/en-US/f9c1a5f7-4fcf-409a-8d7e-388b85512bfe/new-lun-takes-a-long-time-to-format-and-errors-out?forum=winserv
Before you install the new shared storage please first validation this storage first, you can refer the following KB to validation the new LUN.
Understanding Cluster Validation Tests: Storage
http://technet.microsoft.com/en-us/library/cc771259.aspx
I’m glad to be of help to you!
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

The website takes a long time to lod and it does not display correctly the layout is expanded.

When i try to load the website it takes a long time to load and when it does the layout is expanded and no images appear. The site has the same problems with IE and chrome. I did recently use Reginout.

Can you attach a screenshot?
*http://en.wikipedia.org/wiki/Screenshot
*https://support.mozilla.org/kb/how-do-i-create-screenshot-my-problem
Use a compressed image type like PNG or JPG to save the screenshot.
Did you check the Accessibility settings in Windows?
*http://windows.microsoft.com/en-US/Windows7/Make-the-computer-easier-to-see-optimize-visual-display
*http://windows.microsoft.com/en-US/windows7/Getting-the-best-display-on-your-monitor

My iPhoto often have difficulty in opening without the "repair". Maybe it's because I have almost 2000 pictures! When I initiate repair using Mac for a long time to find and sort faces .... Is it possible to turn off or avoid this feature?

My iPhoto often have difficulty in opening without the "repair". Maybe it's because I have almost 2000 pictures! When I initiate repair using Mac for a long time to find and sort faces .... Is it possible to turn off or avoid this feature?

This user has found a "hack" to turn off faces. Several users have reported success with the method. I can't comfirm the method as I've not used it. Use at your own risk.
lopezio
Re: Iphoto 11 -How to turn off faces?
Dec 30, 2013 9:06 AM (in response to mkmichaelmk)
Start of solution:
I did some digging in the prefs of iPhoto and found out the following. This is how you can disable (turn off) Face detection, without deleting faces found so far (just in case you want to restart processing at another time):
1. Quit iPhoto
2. Open Terminal Application (Applications/Utilities/Terminal.app)
3. Type the following (exactly as is):
defaults write com.apple.iPhoto PKFaceDetectionEnabled 0
(then return)
4. - Start iPhoto - Faces stops getting on your nerves...
If you ever need to re-enable faces, just do the same again and replace the 0 with 1.
OT

Takes a long time to find wireless network

So for the past few months my (Santa Rosa) MBP will take an extremely long time to find a wireless network. This happens both at home and other places where I have connected in the past and am wanting to use a remembered network. It can take as long as two and a half minutes to connect. If I click on the airport icon in the menu bar, then it says it's scanning for networks during this time.
Usually if I create a new location then the problem will go away but then seems to come back. The problem also persists if I use a different user.
I've repaired permissions, done a disk repair and even used Diskwarrior. I miss instantly finding wireless networks. It's a small inconvenience, granted but was hoping to get this fixed once and for all.
Anyone have any suggestions of things to try? Thanks all.

ldcorn wrote:
My computer also has been taking a long time to find a wireless network, up to several minutes. I often have to have it "scan" for networks several times before it finally picks it up. Is there a solution? This has been going on for many months. Other computers (PCs, iPhone) pick up the signals within a few seconds, but my Powerbook takes several minutes, even over 5 minutes sometimes.
See how many networks are listed in Sys Prefs: Network: Advance. Drag the preferred to the top. Delete any you don't really need.
Message was edited by: tjk

Firefox takes very long time to open and often crashes for some websites

i have used firefox 3.6 with windows xp, vista and now windows 7. there is same problem i am facing at all after well usage of week. firefox takes very long time to open approx. 1 minute at first click. after refreshing computer when i click again, it becomes ready to use but meanwhile you re working firefox opens in another window perhaps for the first click. what is this please? i have reinstalled firefox but it is not fixing problem
== Troubleshooting information ==
how can firefox be ready for use at first click?

Open Activity Monitor and kill this process - rapportd.
Reinstalling OS X Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Reinstalling OS X Without Erasing the Drive
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility and press the Continue button. After Disk Utility loads select the Macintosh HD entry from the the left side list. Click on the First Aid tab, then click on the Repair Disk button. If Disk Utility reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit Disk Utility and return to the main menu.
Reinstall OS X: Select Reinstall OS X and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
Alternatively, see:
Reinstall OS X Without Erasing the Drive
Choose the version you have installed now:
OS X Yosemite- Reinstall OS X
OS X Mavericks- Reinstall OS X
OS X Mountain Lion- Reinstall OS X
OS X Lion- Reinstall Mac OS X
Note: You will need an active Internet connection. I suggest using Ethernet
if possible because it is three times faster than wireless.

Firefox is running slow, sluggishly, websites take a long time to load, to connect. I've done everything this board has suggested.

Firefox is really starting to annoy me. Sometimes it runs slow and sluggishly, other times it doesn't. Usually it does though. When I open new tabs, the connection icon will just keep swirling. I constantly get High CPU Useage alerts from my virus protection. I've done everything listed in the below articles. Does anyone have some advice? Firefox didn't use to be like this.
Thank you.
https://support.mozilla.org/en-US/questions/864739?as=aaq
https://support.mozilla.org/en-US/questions/882138#answer-256718

Alright, it's getting to the point where I can barely use FireFox anymore. It's getting worse by the day, I don't understand. Web pages take a LONG time to load, but sometimes they don't....it's hit or miss. But when they do take a long time, they take a long time.
It's getting very bad. I don't know much about computers, safe mode, and all that. It would really help if someone could walk me through what to do, like they would a 10-year old... actually a 10-year old probably knows more than me. Well you get the idea.
I really want to keep using this browser, but if I don't get it fixed I will have to stop. Like I said in the initial post, I've done all the things those two links suggested. It got better at first, but now it seems like it's gotten worse.

When I click Add Bookmark the bookmark window takes a long time showing up and then starts appearing and disappearing.

I click on Bookmarks in the Menu Bar. Then I scroll to Add Bookmark and click on that. Normally a Window appears allowing me to select where I want the new bookmark saved. Now this window takes a long time to appear if it ever does (sometimes I get tired of waiting). Then when I attempt to put my cursor arrow somewhere in this window, the window disappears. Then it starts appearing and disappearing when I move my cursor around.

That is a problem with an AVG extension or toolbar (tavgp)
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
* Don't make any changes on the Safe mode start window.
* https://support.mozilla.com/kb/Safe+Mode
* https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

HT2506 every time i open an image or PDF file using preview the mac take a long time to load and opens every single file the usually opens with PDF at the same time after a noticeable delay i would like to know why and i would like to know how i can avoid

every time i try to oppen a file like an image or a PDF it oppens by default using oreview built in appliction
occasionally this is accompanied by a long delay after wich the preview oppens every file in the downloads folder and i can navigate through them with ease
i would like to know why the application has this elay i really want to avoid it
because every tome i want to oppen an image there is a risk it would take a minnute or two

In the finder right click on the iPhoto library and show package contents, find the folder named import (or importing) and drag it to the desk top. Do NOT make any other changes of any sort. Launch iPhoto and you will Be fine. Open the import(ing) folder and if there are any photos in it you need import them to iPhoto then trash the imoort(ing) folder.
LN

My mail program takes a long time to open and the whole system takes almost 2 minutes to shut down at night What should I do?

Hi, Recently my system has been slow to boot up in the morning & slower still to shut down at night.
Also my mail program is slow to open. I do have emails archived but my trash is always deleted & I'm trying to keep my "sent" folder not too full
Occasionally any programs I'm working in (Photoshop, InDesign, Illustrator, etc) takes time to process whatever task I'm doing. (This happens maybe once or twice a week, not often)
thanks

judithfromrvc wrote:
Macintosh HD:
Capacity: 249.72 GB (249,715,376,128 bytes)
Available: 176.64 GB (176,635,330,560 bytes)
Is the bolded text the correct info? Many thanks for any help, J
<Edited By Host>
Yes it is. Thank you very much. You appear to have adaquate hard drive space available. Now try the following....
Disconnect all peripherals from your computer.
Boot from your install disc & run Repair Disk from the utility menu. To use the Install Mac OS X disc, insert the disc, and restart your computer while holding down the C key as it starts up.
Select your language.
Once on the desktop, select Utility in the menu bar.
Select Disk Utility.
Select the disk or volume in the list of disks and volumes, and then click First Aid.
Click Repair Disk.
Restart your computer when done.
Repair permissions after you reach the desktop-http://support.apple.com/kb/HT2963 and restart your computer.

Ever since I downloaded the latest FIREFOX websites and pages take a long time to open and some of my online games don't open up correctly. Can I go back to the previous version ?

It takes awhile for anything/everything to load after I click on it when I'm online. It will freeze up about every 3 to 5 minutes for approx. 5 to 10 seconds at random. Some of my games will not load correctly on when I'm on "KING.com". This problem does NOT occur when I use "Internet Explorer" Can I go back to a earlier version of FIREFOX ?

It would, perhaps, be more helpful if you explained how to decrease the value of the pref network.http.max-connections from 256 to 30 in steps that this novice can easily follow. I have looked at the link above and found it far too confusing and no mention anywhere of this network.http.max-connections. Any chance someone could do this for me, please? At the moment I am having to use a different browser to play games on King.com is this what Mozilla want? I feel quite let down and wish I not made the upgrade from the 3 version to the 9.

Win8 can not find and connect the wireless network which created in win7

I am a fan of DOTA, sometimes i play it with my roommate. But after i installed win8, my roommate and i can not connect to each other. He used win7 to set up a wireless network, but i could not find the network. And i used win8 to set up a
wireless network.Althrought it prompted create successfully, i could not find it in my laptop. So who can explain it to me? I really think using the networkd on right side instead of the classic network finder is a big mistake.

Hi,
As you said,the other laptop couldn't see the adhoc network.
I suggest you use the following method to re-create the adhoc network.
Firstly,please use the following command to verify that your network interface supports virtualization.
netsh wlan show drivers
If Hosted network supported says Yes, please enter the following commands to configure an ad hoc wireless connection.
netsh wlan set hostednetwork mode=allow ssid=<network name> key=<passkey>
Then,you need to start the mode to create an ad hoc connection. Please enter the command below.
netsh wlan start hostednetwork
For the detail information, refer to the following link:
http://www.addictivetips.com/windows-tips/how-to-create-wireless-ad-hoc-internet-connection-in-windows-8/
Note: Microsoft provides third-party contact information to help you find technical support. This contact information may change without notice. Microsoft does not guarantee the accuracy of this third-party contact information.
Regards,
Kelvin hsu
TechNet Community Support

Takes a long time to find and connect to wireless

Similar Messages

Maybe you are looking for